Hi Steve,
Steve Bennett wrote:
Likewise, a cleaned up version of the spi mmc patch.
BTW You can ditch the MCF IPS driver patch I sent. I'll send a new version
based on mmap at some point.
Ok. That looks ok, applied.
Regards
Greg
-
Hi Steve,
Steve Bennett wrote:
Here is an updated version of the coldfire qspi patch with the uglies
removed.
Looks ok, applied.
Note that the changes to drivers/spi/spi.c where already in
2.6.21.
Regards
Greg
Greg Un
Jivin Mike Frysinger lays it down ...
> On Wednesday 30 May 2007, David McCullough wrote:
> > Jivin Mike Frysinger lays it down ...
> >
> > > as we added support for real shared libraries in our Blackfin dist via
> > > FDPIC ELF, we quickly hit limitations due to the way libraries are
> > > handle
Quoth Neil 林搏宇:
> Well, I did do "make menuconig"(I do not have X enviroment),
> "make user_only" "make lib_only" "make romfs" before.
>
> I changed toolchain halfway, since it reported that my arm-elf
> toolchain was too old for "make". maybe it is the reason.
If you change toolchain
Hi, all
i used the uclinux 2.6.16 kernel version
I tried to add the driver about usb wifi based on rt73 netchip which is
produced by Ralink.
This driver need to load a firmware named rt73.bin when the open() function's
called.
In this conidtion, and I know the firmware should be loaded by the hot
Add S3C4510B to the list.
- Original Message -
From: xavier.montagne
To: uClinux development list
Sent: Monday, June 04, 2007 11:52 AM
Subject: Re: Re: [uClinux-dev] hardware platform for uClinux
Yes for sure :
S3C444B0X
S3C2410A
S3C2440
Xavier
- Original
Francisco Perea,您好!
Thanks for your sharing experience.
Well, I did do "make menuconig"(I do not have X enviroment), "make
user_only" "make lib_only" "make romfs" before.
I changed toolchain halfway, since it reported that my arm-elf
toolchain was too old for "make". m
Unsubsribe me from the list
--- Francisco Perea <[EMAIL PROTECTED]> wrote:
> Hi,
>
> I'm using uClinux for Coldfire. When I started I use
> to have those problems.
> I think problem seems to be the way you compile
> kernel. You HAVE to do
> "make xconfig", "make dep", for kernel < 2.4 and
> "make
Hi,
I'm using uClinux for Coldfire. When I started I use to have those problems.
I think problem seems to be the way you compile kernel. You HAVE to do
"make xconfig", "make dep", for kernel < 2.4 and "make". This process
will create symbolic links for your architecture, asm files and
others. The
Hi,
I answer to myself:
2007/5/24, Francisco Perea <[EMAIL PROTECTED]>:
Hi,
I'm newbie in Linux land. I'm trying to build a small router for GPRS
applications and I downloaded last version of uclinux
(uClinux-dist-20070130) and m68k-tools (m68k-uclinux-tools-20061214)
for a M5272C3 EVB.
It com
Yes for sure :
S3C444B0X
S3C2410A
S3C2440
Xavier
- Original Message -
From: Yuen Chi Chuen
To: Robin Getz ; uclinux-dev@uclinux.org
Sent: Monday, May 21, 2007 12:34 PM
Subject: Re: [uClinux-dev] hardware platform for uClinux
Dear all,
Thanks so much for your reference.
Hi,
I'm newbie in Linux land. I'm trying to build a small router for GPRS
applications and I downloaded last version of uclinux
(uClinux-dist-20070130) and m68k-tools (m68k-uclinux-tools-20061214)
for a M5272C3 EVB.
It compiles fine for default options, but when I set routing
functions, linker s
hi,
is there a mirror i can use instead http://www.uclinux.org/pub/uClinux/
it is so slow, i am waiting for 1mb about a hour
regards ulf
___
uClinux-dev mailing list
uClinux-dev@uclinux.org
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This mes
On Wednesday 30 May 2007, David McCullough wrote:
> Jivin Gavin Lambert lays it down ...
>
> > Quoth Mike Frysinger:
> > > then why not integrate it into the configure script ? have it test to
> > > see if the ledman.h header exists and if so, it'll define
> > > HAVE_LINUX_LEDMAN_H like every othe
Hi Zhou,
Thanks a lot, do you any links talking about how to build hardware board by
samsung 44B0 or 24x0?
Regards,
YUEN Chi Chuen
- 郵件原件
寄件人﹕ "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>
收件人 uclinux-dev@uclinux.org
傳送日期﹕ 2007 年 5月 22 日 星期二 下午 6:04:51
主題: RE: [uClinux-dev] hardware platform
Dear all,
Thanks so much for your reference. Do any Samsung CPU support uClinux?
Regards,
Anson YUEN Chi Chuen
- 郵件原件
寄件人﹕ Robin Getz <[EMAIL PROTECTED]>
收件人 uclinux-dev@uclinux.org
副本抄送 (CC) Yuen Chi Chuen <[EMAIL PROTECTED]>
傳送日期﹕ 2007 年 5月 16 日 星期三 下午 10:16:44
主題: Re: [uClinux-dev]
16 matches
Mail list logo