I am still running 4.3.10 and suddenly I get this error everytime I restart a
VM, any Vm on any host (I have 13 hosts in 2 different clusters)
VM FLEETGEN-PCC-001 is down with error. Exit message: XML error: there is no
hub at port 1 in USB address bus: 0 port: 1.1.
Any idea what could be diffe
I have experienced the same performance problem in creating new template or
creating new stateful image from template. I have traced it to the use of
qemu-img convert which is very very slow.
Currently a template creation on my setup, takes around 29m for a 45G image
when a simple copy over NF
through ovirtmgmt and the SPM?
3) Is there a recipe or howto available to follow
Thanks
Pascal
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
nce, make you changes and bring the domain
> out of maintenance.
>
> However, if you're moving to a different NFS server, or even different
> path on the same server then I think the answer is no. In this scenario
> you'd need to create a new domain and move each vdisk acros
What advantages does ovirt in hyperconerge mode offer over using glusterfs
on a separate stack unrelated to orvirt except as a domain storage? I am
looking into moving our NFS server to a distributed redundant solution.
What is the best, most reliable, fastest solution I could build that ovirt
can
I need to upgrade my main domain storage (NFS) which hosts 100s of VMs and
templates including the hosted engine. Can I put the data center in global
maintenance, do a quick sync and swap of the domain storage and bring it back
up without missing a beat?
_
Anyone drom redhat has any feedback on this. 3 times speed gain in cloning
or templating a VM makes a big difference imo
On Wed, Nov 10, 2021, 6:41 PM Pascal D wrote:
> -o preallocation=metadata brings it down to 7m40s
> ___
> Users mai
-o preallocation=metadata brings it down to 7m40s
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/c
I have been trying to figure out why cloning a VM and creating a template from
ovirt is so slow. I am using ovirt 4.3.10 over NFS. My NFS server is running
NFS 4 over RAID10 with SSD disks over a 10G network and 9000 MTU
Therocially I should be writing a 50GB file in around 1m30s
a direct copy f
I have finally succeeded in creating a logical network. Basically the steps are
1) create the network
2) associate the network to a cluster
3) assign a network label to that network
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to
I am trying to create a new network using the Rest Api. This network Is for VM
and needs to be part of a network label. Here is that Jason I am using. The
network gets created but is not part of the network label. When I try to create
it using the network labels href I get an error that the use
On my setup I noticed that creating a template from a VM takes a very long time
(around 35min for a VM disk of around 35G) even though my NFS storage network
is 10G with 9000 MTU.
I am wondering if creating a template is done on ovirtmngt instead of storage
as this network is 1G but still the
What is the easiest way to clone a template using rest api. I know I can create
a VM from a template then make a new template from this new VM but I would like
to just clone a template directly so I can maintain different branches
TIA
___
Users mailing
I tried all sort of ways and none work in json. However I have no problem
creating a VM using json or other entities. It seems to me it could be a bug
and this is why I am reporting in. I am using 4.3 by the way.
___
Users mailing list -- users@ovirt.or
I am unable to create disk using JSON however the same query in XML works
great. In Json I get the following message back:
{
"detail": "For correct usage, see:
https://ov1.butterflyit.com/ovirt-engine/apidoc#services/disks/methods/add";,
"reason": "Request syntactically incorrect."
}
Both u
For anyone who encounter the same problem I followed this thread and was able
to recover 15G in my /var. I will be keeping an eye on it from now on.
Thank you Juhani for your help
https://lists.ovirt.org/archives/list/users@ovirt.org/message/HRTNYTZXYCRBNKVOU6DWBVQU6VIL5M7Y/
is it safe to systemctl stop ovirt-engine-dwhd on a running hosted-engine
will running subsequently dwh-vacuum reclaim any space without adding any while
doing it?
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovir
I had to add a file in /etc/ld.conf.d called pgsql.conf with
/opt/rh/rh-postgresql10/root/usr/lib64
to be able to run dwh_vacuum
but that failed too. Maybe not enough room to clean
How do I disable and remove dwh or move it to a different vm?
___
Users m
Thank you. I tried engine-vacuum but that didn't do anything. I tried also
dwh-vacuum but I got libq.si.rh-postgresql10-5 cannot open shared object file.
No such file or directory
Those files seem to be growing every day. Not sure what they are for?
-rw---. 1 postgres postgres 436M May 7
I have an issue with my 4.3 hosted-engine. The /var is full. The directory
taking 20G is /var/opt/rh/rh-postgresql10/lib/pgsql/data/base/data/16398
some of those files have size over 1GB. Can they be safely removed?
TIA
___
Users mailing list -- users
finally got it. I needed to force --ssl-version=tls1.2 I will write a summary
of my findings fot anyone interested.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org
I think part of my misunderstanding is that ovirt-websocket-proxy does a few
things behind the scene as it is not the source of the initial connection to
ovirt.
I am going another route. My proxy are servers which get the console.vv file
from ovirt when they are alerted someone wants to make a
Michal,
Could you explain in details this part of your email?
> We modified the client to sign the request for proxy that is verified by the
> (also
> modified) proxy. There are small changes but they would need to be done for
> any other
> client you’re trying to use (and for the proxy if you’
Michal,
Thank you for your response. I know I am all over the place as I am trying to
figure what works and what doesn't. What I know so far is this.
spice-web-client from eyeos https://github.com/eyeos/spice-web-client and the
forked version from flex-vdi https://github.com/flexVDI/spice-web-
Has someone able to get spice-html5 or any other web client working with ovirt?
I am using 4.3 and trying to get it working but so far no luck?
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statem
This is currently what I got: CONSOLE is the path to the console.vv file just
downloaded. I have tested that logic with remote-viewer. So I know this is
working at least. Now my goal is to get spice-web-client to work as well.
However I am not understanding yet everything about the expectation o
I will. I wish there was more documentation on how all of this works. My
current test sniffing the network show that actually the traffic is not on
the port as defined in the console file but on the tls-port of that file.
so I am a little confused how all of this works. And since everything is
SSLe
Thanks for your response. From it I deduct that the authentication must happen
from the client not the proxy.
however I am not finding any code in spice-html5 which would confirm this. So
my thinking is that the authentication must happen on the websockify side. From
the websockify docs I can
found any
documentation on how this is working. I am ready to read remote-viewer code
to try to figure out though
Thanks
On Fri, Mar 19, 2021 at 8:22 AM Michal Skrivanek <
michal.skriva...@redhat.com> wrote:
> Hi,
>
> > On 19. 3. 2021, at 3:56, Pascal D wrote:
> >
> > Hi,
Hi,
I am trying to get the spice-web-client working with ovirt. One area where I am
having difficulties is authentication.Looking at remote-viewer on linux I am
able to see that the minimum fields to have a successful spice connection are
the following:
[virt-viewer]
type=spice
host=70.xxx.176
Alex
From your response it looks you were able to use spicehtml5 using a squid
proxy. Do you mind sharing your setup or some howto ou followed. I have been
wanting to deploy it in our setup.
TIA
Pascal
___
Users mailing list -- users@ovirt.org
To
L767
>
> On Tue, Jan 26, 2021 at 3:54 PM Pascal DeMilly
> wrote:
> >
> > Hello
> >
> > Any ideas how to retrieve the job Id of an async job at the time of
> creation or from a job to know which entities (VM, disk, template) Id it
> was created from
> >
Hello
Any ideas how to retrieve the job Id of an async job at the time of
creation or from a job to know which entities (VM, disk, template) Id it
was created from
Thanks
On Sat, Jan 23, 2021, 10:04 AM Martin Perina wrote:
> Hi Ori,
>
> could you please take a look?
>
> Thanks,
> Martin
>
> On
I am using the rest api to create a VM, because the VM is cloned from the
template and it takes a long time, I am also passing the async parameters
hoping to receive back a job id, which I could then query
https://x/ovirt-engine/api/vms?async=true&clone=true
however I get the new VM record
otherwise
Thank again
Pascal
On Fri, Nov 13, 2020 at 7:28 AM Dominik Holler wrote:
>
>
> On Fri, Nov 13, 2020 at 4:19 PM Pascal DeMilly
> wrote:
>
>> Thank you
>>
>> That is exactly what I was looking for. Any chance it could be back
>> ported to 4.3. Maybe
e 20 hosts running currently
Get Outlook for Android<https://aka.ms/ghei36>
From: Dominik Holler
Sent: Friday, November 13, 2020 6:21:56 AM
To: Pascal DeMilly
Cc: users
Subject: Re: [ovirt-users] Network profile filtering
On Fri, Nov 13, 2020 at 5:1
How will I go about that? I can see in network profile the ability to set
different filter but can't find a way to create new filter.
Thanks for your help
Pascal
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to use
Currently from the ovirt web interface it is not possible to suspend a
stateless VM. However I have a need for it for example when I want to free idle
VM (or migrate them to a different cluster) and still not lose the current
status of the VM.
Thanks
Has Anybody been successful sharing folder with the client machine using ovirt
and virt viewer
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
Hi,
I would like to be able to share a local folder with my remote desktop hosted
by ovirt. Looking everywhere it seems that what is needed is to have
spice-webdavd installed on the guest and have qemu set with this channel
org.spice-space.webdav.0
I don't see in the web admin interface any wa
I keep getting an error: Could not set configuration for CRTC 63.
I checked that I have spice-agent and spice-agentd running. Also
qemu-guest-agent. lspci shows that I have a QXL adapter. xrandr -q shows that I
have many different config available. but none work.
What am I missing?
Screen
Hi there
Still stuck when creating an NFS storage domain with an AIO
installation. Below is the engine trace. Can someone say what means that
351 error ?
Many thanks in advance
P
PS. I could observe that the NFS mount is done. Ovirt fails afterward.
2015-02-19 10:53:23,842 INFO
[org.ovirt.e
Checked everything, unset the NFS lock...
Still the same.[?]
2015-02-06 22:50 GMT+01:00 Donny Davis :
> Did you enter this parameter from the guide
>
> Lock=False in /etc/nfsmount.conf
>
> Donny DOn Feb 6, 2015 12:56 PM, Pascal Jakobi
> wrote:
> >
> > Sorry
Sorry for the delay :
[root@lab1 ~]# ausearch -m avc
[root@lab1 ~]#
However, SELinux is enforced.
Will check what happens when disabled.
On 02/06/2015 10:25 AM, Simone Tiraboschi wrote:
- Original Message -
From: "Pascal Jakobi"
To: users@ovirt.org
Sent: Friday, February
an up
[ INFO ] Generating answer file
'/var/lib/ovirt-hosted-engine-setup/answers/answers-20150206093147.conf'
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
--
Pascal Jakobi <mailto:pascal.jak...@gmail.com>
116 rue de Stalingrad
93100 Montreuil, France
Tel :
being said be warned that there are isues with Ovirt/F20
Thanks again
P
On 07/07/2014 10:44 PM, Alon Bar-Lev wrote:
- Original Message -
From: "Pascal Jakobi"
To: users@ovirt.org
Sent: Friday, July 4, 2014 8:13:47 PM
Subject: [ovirt-users] Failing ovirt install/F20
Instal
NFO [org.jboss.as] JBAS015950: WildFly 8.0.0.Final "WildFly"
stopped in 12ms
--
*Pascal Jakobi*
116 rue de Stalingrad
93100 Montreuil, France
*+33 6 87 47 58 19*pascal.jak...@gmail.com
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
lli
> - Original Message -
> > From: "Pascal Jakobi"
> > To: users@ovirt.org
> > Sent: Monday, December 23, 2013 4:33:23 PM
> > Subject: Re: [Users] AcquireHostId problem
> >
> > Ok.
> > What I am doing is just adding a new NFS domain that fa
Ok.
What I am doing is just adding a new NFS domain that fails : "Failed to add
Storage Domain DataLab2. (User: admin@internal)"
And I thought that the "/dev/watchdog0 failed to set timeout" msg was
signalling an error.
Will rerun test in 5 minutes.
Thxs
___
ded, just ask
2013/12/21 Federico Simoncelli
> - Original Message -
> > From: "Pascal Jakobi"
> > To: "Federico Simoncelli" , users@ovirt.org
> > Sent: Friday, December 20, 2013 11:54:21 PM
> > Subject: Re: [Users] AcquireHostId problem
>
a bit.
However I still get "unable to attach storage" when creating a domain
2013/12/20 Federico Simoncelli
> - Original Message -
> > From: "Pascal Jakobi"
> > To: "Federico Simoncelli"
> > Sent: Friday, December 20, 2013 4:44:5
Original Message -
> > From: "Pascal Jakobi"
> > To: "Federico Simoncelli"
> > Cc: users@ovirt.org
> > Sent: Thursday, December 19, 2013 4:05:07 PM
> > Subject: Re: [Users] AcquireHostId problem
> >
> > Federico
> >
&g
Federico
On may suspect wdmd isn't running as wdmd_connect failed (see sanlock.log).
I have ran a "ps" command - no wdmd
Any idea why wdmd_connect might fail ?
2013/12/19 Federico Simoncelli
> - Original Message -
> > From: "Pascal Jakobi"
1920 [4238]: s1 create_watchdog failed -1
2013-12-18 21:23:53+0100 1921 [867]: s1 add_lockspace fail result -203
2013/12/18 Pascal Jakobi
> Apologies for not replying more quickly - I was cross-checking.
> The bad news is that it has not been resolved.
>
> I can mount NFS shares outs
Context :
vdsm-4.13.0-11.fc19.x86_64
sanlock-2.8-1.fc19.x86_64
Creating storage domain (NFS) fails with error in engine.log such as
Error code AcquireHostIdFailure and error message VDSGenericException:
VDSErrorException: Failed to CreateStorage
And
Cannot acquire host id: ('b4f05e3e-d714-45c4-adf
Fixed. It was the trailing 0's in ifcfg-em1 (IPADDR0, etc...) which had to
be removed.
2013/12/9 Pascal Jakobi
> [root@lab2 ~]# vdsClient -s 0 getVdsCaps
> HBAInventory = {'FC': [], 'iSCSI': [{'InitiatorName':
> 'iqn.1994-05.com.redhat:4334
7;version': '1.0.5.7'},
'mom': {'buildtime': 1385055339, 'release': '6.fc19',
'version': '0.3.2'},
'qemu-img': {'buildtime': 1384728923,
'releas
[root@lab2 ~]# vdsClient -s localhost getVdsCaps | grep cluster
*clusterLevels = ['3.0', '3.1', '3.2']*
[root@lab2 ~]# cd /etc/yum.repos.d/
[root@lab2 yum.repos.d]# ls
fedora.repo fedora-updates.repo fedora-updates-testing.repo
fedora-virt-preview.repo ovirt.repo
[root@lab2 yum.repos.d]# cat
m: "Assaf Muller"
> > To: "Pascal Jakobi"
> > Cc: users@ovirt.org
> > Sent: Wednesday, December 4, 2013 9:09:18 AM
> > Subject: Re: [Users] ovirtmgmt not installed
> >
> > I personally have a F19 host working against 3.3 engine. Could y
compatible with versions (3.0,3.1,3.2) and cannot join Cluster
Default which is set to version 3.3.
Don't know what is to be set
Anyway, I created a 3.2 cluster and installed the host into it. Seems to work
(the host is up).
Thanks again for support.
Pascal Jakobi
116 rue de Stalingrad
'mom': {'buildtime': 1375215820, 'release': '3.fc19',
'version': '0.3.2'},
'qemu-img': {'buildtime': 1383700301,
'release': '13.fc19',
As a matter of fact, when I installed F19, it created an eno1 device,
aliased to em1. Don't know why, yet.
Even adding a "GATEWAY" clause in /etc/sysconfig/network does not seem to
change the problem
Will check how to change the device name.
2013/12/1 Moti Asaya
'release': '13.fc19',
'version': '1.4.2'},
'qemu-kvm': {'buildtime': 1383700301,
'release': '13.fc19',
Both ovirt engine & host run F19.
oVirt Engine Version: 3.3.1-2.fc19
I get an "unexpected connection termination" when trying to install host.
Going further I have more than my doubts about what's executed on the fedora
host as described in the logs :
umask 0077; MYTMP="$(mktemp -t ovirt-X
ing name
'vdsm-ovirtmgmt'" at host deply stage).
However, the fact that I cannot run 3.?3 seems strage.
Can u pls advise ?
Thxs again
2013/11/28 Alon Bar-Lev
>
>
> - Original Message -
> > From: "Pascal Jakobi"
> > To: users@ovirt
Both ovirt engine & host run F19.
oVirt Engine Version: 3.3.1-2.fc19
I get an "unexpected connection termination" when trying to install host
(see attached log).
Can someone help ?
Thanks in advance
*Pascal *
2013-11-28 09:52:53,285 INFO [org.ovirt.engine.core.utils.LocalConfig
66 matches
Mail list logo
