We see exactly the same, and it does not seem to be Vendor dependend.
- Equallogic Controller Failover -> VM get paused and maybe unpaused but
most dont
- Nexenta ZFS iSCSI with RSF1 HA -> same
- FreeBSD ctld iscsi-target + Heartbeat -> same
- CentOS + iscsi-target + Heartbeat -> same
Multipath S
On Mon, May 30, 2016 at 01:25:09AM +, Christopher Lord wrote:
> I have a host that has dropped out of my cluster because it can't start
> vdsmd. Initially the logs were reporting a duplicate gateway, so I removed
> the duplicate. But I still can't start vdsmd. /var/log/vdsm/supervdsm.log is
Hi,
since some time we get Error Messages from Sanlock, and so far i was not
able to figure out what exactly they try to tell and more important if
its something which can be ignored or needs to be fixed (and how).
Here are the Versions we are using currently:
Engine
ovirt-engine-3.5.6.2-1.el6.
Hi
Yes, I created the volume using "gluster volume create ..." prior to
installing ovirt. Something I noticed is that there is no "gluster" bridge
on top of the interface I selected for the "Gluster Management" network -
could this be the problem?
Thanks,
Roderick
Roderick Mooi
Senior Engineer
Can you reply on my question?
Yaniv Dary
Technical Product Manager
Red Hat Israel Ltd.
34 Jerusalem Road
Building A, 4th floor
Ra'anana, Israel 4350109
Tel : +972 (9) 7692306
8272306
Email: yd...@redhat.com
IRC : ydary
On Thu, May 26, 2016 at 9:14 AM, Yaniv Dary wrote:
> What DR solut
Hi,
I'm happily using our research cluster in Italy via gluster, and now I'm
trying to hotplug a ceph disk on a VM of my cluster, without success.
The ceph cluster is managed via openstack cinder and I can create
correctly the disk via ovirt (3.6.6.2-1 on CentOS 7.2).
The problem comes when tryi
>'ovirt-engine-extensions-tool' logs would be more helpfull.
Here it is :
https://bpaste.net/show/a166df875909
I can't see anything else than this SSL error and what seems to be a missing
python module : "ImportError: No module named dnf"
Can you see something else or do you have any idea of wh
On 05/30/2016 12:03 PM, Alexis HAUSER wrote:
'ovirt-engine-extensions-tool' logs would be more helpfull.
Here it is :
https://bpaste.net/show/a166df875909
I can't see anything else than this SSL error and what seems to be a missing python
module : "ImportError: No module named dnf"
Can you s
Hi,
just to answer myself, I found these instructions that solved my problem:
http://7xqb88.com1.z0.glb.clouddn.com/Features_Cinder%20Integration.pdf
Basically, I was missing the step to add the ceph key to the
Authentication Keys tab of the cinder External Provider.
It's all working now.
Chee
Hello,
I set up 8 Hosts and self-hosted-engine running HA on 3 of them from
gluster replica 3 Volume. HA is working, I can set one host of the 3
configured for hosted-engine to maintenance and engine migrates to other
host. I did the hosted-engine --deploy with type gluster and my gluster
hosted s
> On 26 May 2016, at 18:17, Sandro Bonazzola wrote:
>
> Il 26/Mag/2016 12:50, "Yedidyah Bar David" ha scritto:
>>
>> On Thu, May 26, 2016 at 1:21 PM, Pavel Gashev wrote:
>>> I had an issue with updating to 3.6.6. There were errors during
> engine-setup:
>>>
>>> [ ERROR ] Yum Non-fatal POSTUN
>
> Running with selinux disabled is not recommended nor supported.
> It should be easy to skip over that problem, but in general this is not
> something you should hit in normal environment
That's very theorical recommandation. selinux is very very often disabled,
because nobody really underst
> On 30 May 2016, at 14:57, Fabrice Bacchella
> wrote:
>
>>
>> Running with selinux disabled is not recommended nor supported.
>> It should be easy to skip over that problem, but in general this is not
>> something you should hit in normal environment
>
> That's very theorical recommandation
Hello,
We're planning a move from our old building towards a new one a few
meters away.
In a similar way of Martijn
(https://www.mail-archive.com/users@ovirt.org/msg33182.html), I have
maintenance planed on our storage side.
Say an oVirt DC is using a SAN's LUN via iSCSI (Equallogic).
Th
>This is output of installation script
>'ovirt-engine-extension-aaa-ldap-setup', which is written in python, but
>aaa-ldap extension in Java. So the strange thing is that you can connect
>via
>startTLS in python script, but later you can't connect with aaa-ldap
>Java extension.
>Can you please
> Le 30 mai 2016 à 15:01, Michal Skrivanek a
> écrit :
>
>
>> On 30 May 2016, at 14:57, Fabrice Bacchella
>> wrote:
>>
>>>
>>> Running with selinux disabled is not recommended nor supported.
>>> It should be easy to skip over that problem, but in general this is not
>>> something you shou
Hi,
you are aware of the fact that eql sync replication is just about
replication, no single piece of high availability? i am not even sure if
it does ip failover itself. so better think about minutes of
interruptions than seconds.
anyway, dont count on ovirts pause/unpause. theres a real chance
In my case oVirt is running in an OpenVZ container. Since selinux doesn't
support namespaces, it's disabled.
I don't want to fuel the holy war stopdisablingselinux.com vs selinuxsucks.com.
Just please allow us to choose. Thanks.
On 30/05/16 16:01, "users-boun...@ovirt.org on behalf of Michal Sk
> On 30 May 2016, at 15:22, Fabrice Bacchella
> wrote:
>
>>
>> Le 30 mai 2016 à 15:01, Michal Skrivanek a
>> écrit :
>>
>>
>>> On 30 May 2016, at 14:57, Fabrice Bacchella
>>> wrote:
>>>
Running with selinux disabled is not recommended nor supported.
It should be easy to
> On 30 May 2016, at 15:35, Pavel Gashev wrote:
>
> In my case oVirt is running in an OpenVZ container. Since selinux doesn't
> support namespaces, it's disabled.
>
> I don't want to fuel the holy war stopdisablingselinux.com vs
> selinuxsucks.com. Just please allow us to choose. Thanks.
yep
On Mon, May 30, 2016 at 4:49 PM, Michal Skrivanek
wrote:
>
>> On 30 May 2016, at 15:35, Pavel Gashev wrote:
>>
>> In my case oVirt is running in an OpenVZ container. Since selinux doesn't
>> support namespaces, it's disabled.
>>
>> I don't want to fuel the holy war stopdisablingselinux.com vs
>
Le 30/05/2016 15:30, InterNetX - Juergen Gotteswinter a écrit :
Hi,
you are aware of the fact that eql sync replication is just about
replication, no single piece of high availability? i am not even sure if
it does ip failover itself. so better think about minutes of
interruptions than seconds.
Am 5/30/2016 um 3:59 PM schrieb Nicolas Ecarnot:
> Le 30/05/2016 15:30, InterNetX - Juergen Gotteswinter a écrit :
>> Hi,
>>
>> you are aware of the fact that eql sync replication is just about
>> replication, no single piece of high availability? i am not even sure if
>> it does ip failover itself
On 05/30/2016 03:11 PM, Alexis HAUSER wrote:
This is output of installation script
'ovirt-engine-extension-aaa-ldap-setup', which is written in python, but
aaa-ldap extension in Java. So the strange thing is that you can connect
via
startTLS in python script, but later you can't connect with aaa-
On Mon, May 30, 2016 at 1:44 PM, Alessandro De Salvo
wrote:
> Hi,
> just to answer myself, I found these instructions that solved my problem:
>
> http://7xqb88.com1.z0.glb.clouddn.com/Features_Cinder%20Integration.pdf
>
> Basically, I was missing the step to add the ceph key to the Authentication
>Default password is 'changeit' (without quotes).
>Hmm, can you please try use the .jks file generated by aaa-ldap-setup
>tool? Just to be sure.
I still have the same error with the default jks
>Anyway, the strange thing is that aaa-ldap-setup tool passes, but
>extension don't work later.
>My
I will reply to myself here.
Ubuntu 16.04 uses a different naming rules for it's network cards (no more
ethXX). In the cloud image, they have a nic named ens3 wich defaults to DHCP
(this is coded in file /etc/cloud/cloud.cfg.d/50-cloud-init.cfg).
The long delay in booting was in part due to th
In the short term roadmap (covered by
https://bugzilla.redhat.com/show_bug.cgi?id=1022961 ).
Y.
On Mon, May 30, 2016 at 3:30 PM, Ralf Schenk wrote:
> Hello,
>
> I set up 8 Hosts and self-hosted-engine running HA on 3 of them from
> gluster replica 3 Volume. HA is working, I can set one host of t
Hello,
thanks for the hint, but wasn't it already there ? Many documents and
screenshots show the radio-button to enable gluster on the cluster tab
of the Engine Webinterfaces.
Bye
Am 30.05.2016 um 20:28 schrieb Yaniv Kaul:
> In the short term roadmap (covered
> by https://bugzilla.redhat.com/s
Am 28.05.2016 4:07 nachm. schrieb "Yaniv Kaul" :
>
>
>
> On Sat, May 28, 2016 at 12:50 PM, Arman Khalatyan
wrote:
>>
>> Thank you for the hint. I will try next week.
>> Foreman looks quite complex:)
>
>
> I think this is an excellent suggestion - Foreman, while may take a while
to set up, will
On Mon, May 30, 2016 at 4:07 PM, Nicolas Ecarnot wrote:
> Hello,
>
> We're planning a move from our old building towards a new one a few meters
> away.
>
>
>
> In a similar way of Martijn
> (https://www.mail-archive.com/users@ovirt.org/msg33182.html), I have
> maintenance planed on our storage sid
Le 30/05/2016 21:09, Nir Soffer wrote... SOME VERY VALUABLE ANSWERS!
Thank you very much Nir, as your answers will give me food for thought
for the weeks to come.
It's late here, I'll begin checking all this tomorrow, but just a note :
This enforces failing of io request on devices that by d
Sorry for the previous empty email.
I was testing foreman plugins for ovirt deploy. They are some how broken.
The foreman-install --enable-ovirt-provisioning-plugin breaks the foreman
installation. I need to dig deeper:(
Am 28.05.2016 4:07 nachm. schrieb "Yaniv Kaul" :
>
>
>
> On Sat, May 28, 2
On 05/30/2016 06:17 PM, Alexis HAUSER wrote:
Default password is 'changeit' (without quotes).
Hmm, can you please try use the .jks file generated by aaa-ldap-setup
tool? Just to be sure.
I still have the same error with the default jks
Anyway, the strange thing is that aaa-ldap-setup tool
Den 30 maj 2016 22:22 skrev Arman Khalatyan :
>
> Sorry for the previous empty email.
>
> I was testing foreman plugins for ovirt deploy. They are some how broken. The
> foreman-install --enable-ovirt-provisioning-plugin breaks the foreman
> installation. I need to dig deeper:(
Don't know what
35 matches
Mail list logo