Hi Florin, Ed,
I'm testing VCL , and the IPPROTO_RAW is a test case .Since it is not supported
,I'm testing the UDP mode:
server:./vcl_test_server -D 2
client:./vcl_test_client -D 2.1.1.1 2
An assert occure when client startup. More info is shown below:
DBGvpp# 0: /home/vpp/build-data
Hi Ole,
Linux had allowed this configuration and test cases which were running on
Linux failed on VPP.
The reason why it had passed is that linux always picks up the 1st entry
that gets added in routing table i.e. plain interface while in VPP fib
entry always return last interface that get added.
Hi guys,
I’m testing the xcrw . But the packet were 'error-drop'. My configuration and
trace info is shown below:
create host-interface name eth1 mac 00:50:56:3a:32:d2
create host-interface name eth5 mac 00:50:56:31:35:92
set interface ip address host-eth1 11.1.1.2/24
create gre tunnel src 11.
Hi,
We managed to link with openssl 1.1 successfully. The OS is ubuntu 16.04.
Basically we downloaded v1.1, and built it. Then make some changes to vpp
makefile pointing to the correct header and lib files.
V1.0.2 is still there for the other apps, but vpp is working with v1.1.
Regards,
Kingwe
> Thanks for the response. Any plans to differ this behaviour in future to
> support multiple interfaces in the same subnet?
How do you intend for that to work?
(While IPv6 notionally has support for that, as far as I know no
implementations support it.
Best regards,
Ole
-=-=-=-=-=-=-=-=-=-
Hi Neale,
Thanks for the response. Any plans to differ this behaviour in future to
support multiple interfaces in the same subnet?
Regards,
Bindiya
On Mon, May 14, 2018 at 5:15 PM, Neale Ranns (nranns)
wrote:
>
>
> VPP does not support multiple interfaces in the same subnet.
>
> Your scenari
Hi DucTM,
Did you try changing src/plugin/tlsopenssl.am to link against openssl 1.1? I’ve
never tried it, so no idea what the end result may be :-)
Florin
> On May 14, 2018, at 3:52 AM, duct...@viettel.com.vn wrote:
>
> Hi,
> I'm trying to customize the openssl plugin that needs to work with
Thanks a bunch Nitin, your mail helps me connect the dots -- the thing
I was missing was the connection with ethernet_register_interface()
Cool browsing done by you !
Please do check my other mail too on the list (for frames) and it
would be great if we can drill down on that topic too.
Regards
-P
Hi Florin,
Session enable does not help.
hping is using raw sockets so this must be the reason.
Luca
From: Florin Coras
Date: Friday 11 May 2018 at 23:02
To: Luca Muscariello
Cc: "vpp-dev@lists.fd.io"
Subject: Re: [vpp-dev] TCP performance - TSO - HW offloading in general.
Hi Luca,
Not re
Thanks Ole. Makes sense. Let me try by assigning IP to ipip0
Thanks,
Nitin
On Monday 14 May 2018 06:24 PM, Ole Troan wrote:
Nitin,
A tunnel interface is just like any other interface and you need to have an IP
address configured on it to make it IP enabled.
(Or point to another interface with
Nitin,
A tunnel interface is just like any other interface and you need to have an IP
address configured on it to make it IP enabled.
(Or point to another interface with IP unnumbered).
Note that the IPIP interface supports {IPvX over IPvY} where X and Y are 4 and
6. So your patch would blindly
Hi,
Using VPP v1804 I created IP-in-IP tunnel and ran into IP4-not-enabled
issue. Following is the trace
===
-- Start of thread 1 vpp_wk_0 ---
Packet 1
00:04:16:407330: dpdk-input
VirtualFunctionEthernet1/0/1 rx queue 0
buffer 0x
VPP does not support multiple interfaces in the same subnet.
Your scenario will be a configuration error once:
https://gerrit.fd.io/r/#/c/8057/
is committed.
/neale
From: on behalf of bindiya Kurle
Date: Monday, 7 May 2018 at 07:27
To: "vpp-dev@lists.fd.io"
Subject: [vpp-dev] Query on VPP b
Hi,
I'm trying to customize the openssl plugin that needs to work with openssl 1.1
(with some modification also).
Applying the new openssl version to the system is not possible since there are
some other apps rely on openssl, and they do not work with openssl 1.1.
Is there any configuration I can
According to the tutorial steps:
Copy your ssh-key to Vagrant VMs
This steps has to be repeated every time your Vagrant VMs are re-created (i.e.
vagrant destroy command was issued)
echo csit@192.168.255.10{0,1,2} | xargs -n 1 ssh-copy-id
Respond with "csit" as password (without quotes). From now
Xyxue,
If you want to move raw IP/Ethernet around, I'd suggest looking at memif :)
Ed
On Mon, May 14, 2018 at 3:44 AM Florin Coras wrote:
> Hi Xyxue,
>
> No, the stack does not support IPPROTO_RAW. Given that this is a user
> space stack and that you have access to things like memif, may I ask
Hi Xyxue,
No, the stack does not support IPPROTO_RAW. Given that this is a user space
stack and that you have access to things like memif, may I ask what use case
you would need that for?
Florin
> On May 14, 2018, at 12:58 AM, xyxue wrote:
>
>
> Hi guys,
>
> Is the VCL support RAW_IP now
Hi Luca,
That is most probably the reason. We don’t support raw sockets.
Florin
> On May 14, 2018, at 1:21 AM, Luca Muscariello (lumuscar)
> wrote:
>
> Hi Florin,
>
> Session enable does not help.
> hping is using raw sockets so this must be the reason.
>
> Luca
>
>
>
> From: Florin Coras
Hi guys,
Is the VCL support RAW_IP now ? Or is there a plan to support it?
Thanks,
Xyxue
19 matches
Mail list logo