Antwort: Re: Problems after 4.1 Upgrade and Resolutions
Are you using 4.1.0 or 4.1.2? Von: Diana Noble [EMAIL PROTECTED] Am: 30.01.2001 16:22 GMT Bitte antworten an "ADSM: Dist Stor Manager" [EMAIL PROTECTED] An: [EMAIL PROTECTED] Kopie: (Blindkopie: Matthew Muldoon/MAINSTOR/Niedernberg/mus/DE) Thema:Re: Problems after 4.1 Upgrade and Resolutions We are running D25D. This level of microcode ran fine prior to going to TSM 4.1. We had never had an IO error before then. Now we receive the errors on both our tape drives. At 08:43 AM 1/30/01 -0600, you wrote: Diane, What level of microcode are you currently running on your 3590 tape drives. We are running 3590E1A tape drives with a microcode level of D22E. We have been on this level of code for quite some time with no errors. Our 3590's are also house within a 3494. -Original Message- From: Diana Noble [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 30, 2001 8:15 AM To: [EMAIL PROTECTED] Subject: Problems after 4.1 Upgrade and Resolutions I had posted some questions last month regarding problems we encountered after our upgrade to TSM 4.1 and thought I would pass along what we found. We are using AIX 4.3, 3590E's and a 3494. When issuing the dsmadmc command we received "ANS1033E An invalid TCP/IP host name was specified". Resolution was to edit /usr/tivoli/tsm/client/ba/bin/dsm.sys and add a line for TCPServeraddress which stated the tsm server name in full. This was apparently not necessary under 3.1. We could not label K tapes. We had problems with this under 3.1, but it turned out IBM needed to flick a switch on the drives. We upgraded the same day. We would receive "ANR8750E Volume is incompatible with specified device type". IBM had defined the volume range for the K tapes as "K extended" and should have been defined as just "K". We also started receiving IO errors on our 3590 tape drives. This still persists today, but a microcode fix for the problem is in test at IBM and is suppose to be released by the end of the month (Hopefully!). The error we are receiving is "ANR8302E I/O error on drive RMT1 (/dev/rmt1) (OP=WRITE, CC=0, KEY=0B, ASC=44, ASCQ=00".
Re: Antwort: Re: Problems after 4.1 Upgrade and Resolutions
We are running 4.1.2. At 05:41 PM 1/30/01 +0100, you wrote: Are you using 4.1.0 or 4.1.2? Von: Diana Noble [EMAIL PROTECTED] Am: 30.01.2001 16:22 GMT Bitte antworten an "ADSM: Dist Stor Manager" [EMAIL PROTECTED] An: [EMAIL PROTECTED] Kopie: (Blindkopie: Matthew Muldoon/MAINSTOR/Niedernberg/mus/DE) Thema:Re: Problems after 4.1 Upgrade and Resolutions We are running D25D. This level of microcode ran fine prior to going to TSM 4.1. We had never had an IO error before then. Now we receive the errors on both our tape drives. At 08:43 AM 1/30/01 -0600, you wrote: Diane, What level of microcode are you currently running on your 3590 tape drives. We are running 3590E1A tape drives with a microcode level of D22E. We have been on this level of code for quite some time with no errors. Our 3590's are also house within a 3494. -Original Message- From: Diana Noble [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 30, 2001 8:15 AM To: [EMAIL PROTECTED] Subject: Problems after 4.1 Upgrade and Resolutions I had posted some questions last month regarding problems we encountered after our upgrade to TSM 4.1 and thought I would pass along what we found. We are using AIX 4.3, 3590E's and a 3494. When issuing the dsmadmc command we received "ANS1033E An invalid TCP/IP host name was specified". Resolution was to edit /usr/tivoli/tsm/client/ba/bin/dsm.sys and add a line for TCPServeraddress which stated the tsm server name in full. This was apparently not necessary under 3.1. We could not label K tapes. We had problems with this under 3.1, but it turned out IBM needed to flick a switch on the drives. We upgraded the same day. We would receive "ANR8750E Volume is incompatible with specified device type". IBM had defined the volume range for the K tapes as "K extended" and should have been defined as just "K". We also started receiving IO errors on our 3590 tape drives. This still persists today, but a microcode fix for the problem is in test at IBM and is suppose to be released by the end of the month (Hopefully!). The error we are receiving is "ANR8302E I/O error on drive RMT1 (/dev/rmt1) (OP=WRITE, CC=0, KEY=0B, ASC=44, ASCQ=00".
Antwort: Re: Antwort: Re: Problems after 4.1 Upgrade and Resolutions
With the latest Atape driver 5.4.4.0 ? Von: Diana Noble [EMAIL PROTECTED] Am: 30.01.2001 16:46 GMT Bitte antworten an "ADSM: Dist Stor Manager" [EMAIL PROTECTED] An: [EMAIL PROTECTED] Kopie: (Blindkopie: Matthew Muldoon/MAINSTOR/Niedernberg/mus/DE) Thema:Re: Antwort: Re: Problems after 4.1 Upgrade and Resolutions We are running 4.1.2. At 05:41 PM 1/30/01 +0100, you wrote: Are you using 4.1.0 or 4.1.2? Von: Diana Noble [EMAIL PROTECTED] Am: 30.01.2001 16:22 GMT Bitte antworten an "ADSM: Dist Stor Manager" [EMAIL PROTECTED] An: [EMAIL PROTECTED] Kopie: (Blindkopie: Matthew Muldoon/MAINSTOR/Niedernberg/mus/DE) Thema:Re: Problems after 4.1 Upgrade and Resolutions We are running D25D. This level of microcode ran fine prior to going to TSM 4.1. We had never had an IO error before then. Now we receive the errors on both our tape drives. At 08:43 AM 1/30/01 -0600, you wrote: Diane, What level of microcode are you currently running on your 3590 tape drives. We are running 3590E1A tape drives with a microcode level of D22E. We have been on this level of code for quite some time with no errors. Our 3590's are also house within a 3494. -Original Message- From: Diana Noble [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 30, 2001 8:15 AM To: [EMAIL PROTECTED] Subject: Problems after 4.1 Upgrade and Resolutions I had posted some questions last month regarding problems we encountered after our upgrade to TSM 4.1 and thought I would pass along what we found. We are using AIX 4.3, 3590E's and a 3494. When issuing the dsmadmc command we received "ANS1033E An invalid TCP/IP host name was specified". Resolution was to edit /usr/tivoli/tsm/client/ba/bin/dsm.sys and add a line for TCPServeraddress which stated the tsm server name in full. This was apparently not necessary under 3.1. We could not label K tapes. We had problems with this under 3.1, but it turned out IBM needed to flick a switch on the drives. We upgraded the same day. We would receive "ANR8750E Volume is incompatible with specified device type". IBM had defined the volume range for the K tapes as "K extended" and should have been defined as just "K". We also started receiving IO errors on our 3590 tape drives. This still persists today, but a microcode fix for the problem is in test at IBM and is suppose to be released by the end of the month (Hopefully!). The error we are receiving is "ANR8302E I/O error on drive RMT1 (/dev/rmt1) (OP=WRITE, CC=0, KEY=0B, ASC=44, ASCQ=00".
Re: Antwort: Re: Antwort: Re: Problems after 4.1 Upgrade and Resolutions
Yes, our Atape driver is at 5.4.4.0. We initially went from 5.0.2.0 to 5.4.2.0 and saw the problem there also. At 05:51 PM 1/30/01 +0100, you wrote: With the latest Atape driver 5.4.4.0 ? Von: Diana Noble [EMAIL PROTECTED] Am: 30.01.2001 16:46 GMT Bitte antworten an "ADSM: Dist Stor Manager" [EMAIL PROTECTED] An: [EMAIL PROTECTED] Kopie: (Blindkopie: Matthew Muldoon/MAINSTOR/Niedernberg/mus/DE) Thema:Re: Antwort: Re: Problems after 4.1 Upgrade and Resolutions We are running 4.1.2. At 05:41 PM 1/30/01 +0100, you wrote: Are you using 4.1.0 or 4.1.2? Von: Diana Noble [EMAIL PROTECTED] Am: 30.01.2001 16:22 GMT Bitte antworten an "ADSM: Dist Stor Manager" [EMAIL PROTECTED] An: [EMAIL PROTECTED] Kopie: (Blindkopie: Matthew Muldoon/MAINSTOR/Niedernberg/mus/DE) Thema:Re: Problems after 4.1 Upgrade and Resolutions We are running D25D. This level of microcode ran fine prior to going to TSM 4.1. We had never had an IO error before then. Now we receive the errors on both our tape drives. At 08:43 AM 1/30/01 -0600, you wrote: Diane, What level of microcode are you currently running on your 3590 tape drives. We are running 3590E1A tape drives with a microcode level of D22E. We have been on this level of code for quite some time with no errors. Our 3590's are also house within a 3494. -Original Message- From: Diana Noble [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 30, 2001 8:15 AM To: [EMAIL PROTECTED] Subject: Problems after 4.1 Upgrade and Resolutions I had posted some questions last month regarding problems we encountered after our upgrade to TSM 4.1 and thought I would pass along what we found. We are using AIX 4.3, 3590E's and a 3494. When issuing the dsmadmc command we received "ANS1033E An invalid TCP/IP host name was specified". Resolution was to edit /usr/tivoli/tsm/client/ba/bin/dsm.sys and add a line for TCPServeraddress which stated the tsm server name in full. This was apparently not necessary under 3.1. We could not label K tapes. We had problems with this under 3.1, but it turned out IBM needed to flick a switch on the drives. We upgraded the same day. We would receive "ANR8750E Volume is incompatible with specified device type". IBM had defined the volume range for the K tapes as "K extended" and should have been defined as just "K". We also started receiving IO errors on our 3590 tape drives. This still persists today, but a microcode fix for the problem is in test at IBM and is suppose to be released by the end of the month (Hopefully!). The error we are receiving is "ANR8302E I/O error on drive RMT1 (/dev/rmt1) (OP=WRITE, CC=0, KEY=0B, ASC=44, ASCQ=00".
