Re: Migration doesn't end
I ran an audit DB 2 days ago, and then upgraded to 4.1.2 and I haven't seen the problem sincecrossing fingers. === John Monahan Network Team Coordinator Liberty Diversified Industries (763) 536-6677 === "Rushforth, Tim" <[EMAIL PROTECTED]> Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> 02/06/01 03:05 PM Please respond to "ADSM: Dist Stor Manager" To: [EMAIL PROTECTED] cc: Subject:Re: Migration doesn't end Thanks, John. Sounds like the same problem, TSM spins it's wheels until you raise the migration value. Do you have a problem open with Tivoli? I do - PMR # 20860. I am hoping if other people that have this problem report it to Tivoli it may help out on a resolution. I have ran an AUDIT DB (audit volume did not fix) and it did fix the problem, but the problem reappeared in a week. Tim Rushforth City of Winnipeg -Original Message- From: John Monahan [mailto:[EMAIL PROTECTED]] Sent: Monday, February 05, 2001 6:06 PM To: [EMAIL PROTECTED] Subject: Re: Migration doesn't end My CPU doesn't go to 100%, I have a dual, but the activity is much heavier than normal. My second CPU is usually fairly idle, but it is around 50% during this process, the first CPU is above 80%. After raising the migration values, activity returns to normal, which is 0-15%. === John Monahan Network Team Coordinator Liberty Diversified Industries (763) 536-6677 ===
Re: Migration doesn't end
Thanks, John. Sounds like the same problem, TSM spins it's wheels until you raise the migration value. Do you have a problem open with Tivoli? I do - PMR # 20860. I am hoping if other people that have this problem report it to Tivoli it may help out on a resolution. I have ran an AUDIT DB (audit volume did not fix) and it did fix the problem, but the problem reappeared in a week. Tim Rushforth City of Winnipeg -Original Message- From: John Monahan [mailto:[EMAIL PROTECTED]] Sent: Monday, February 05, 2001 6:06 PM To: [EMAIL PROTECTED] Subject: Re: Migration doesn't end My CPU doesn't go to 100%, I have a dual, but the activity is much heavier than normal. My second CPU is usually fairly idle, but it is around 50% during this process, the first CPU is above 80%. After raising the migration values, activity returns to normal, which is 0-15%. === John Monahan Network Team Coordinator Liberty Diversified Industries (763) 536-6677 ===
Re: Migration doesn't end
Just a guess: I have seen situations, where a volume (disk or tape) was empty according to MOVE DATA, and not empty according to DELETE VOLUME. An AUDIT VOLUME helped in that situation and takes much less time than a complete AUDITDB. > >Ok, our problem is back! Now, it does bring the pool to 0%. > > > >Ken and John, can you verify if we are having the same problem? > > > >At the point when migration is not moving any data, does your CPU > >Utilization go up to 100% and stay there until you raise the Migration > >values? > > > I have this problem now, it's a holdover from my ADSM 3.1.2.55. The upgrade > didn't make that go away. The pool is actually empty, I wonder what is > causing it to think something is there. I have not paid attention to the CPU > usage when this is going on, however I have done other things with the > server during the migration and it seems to answer up normally. > > In the past I also had to auditdb to fix the problem. Unfortunately the last > time that took forever so I can't afford to run it at the moment. I just let > it go, when migrate off runs it quits. > > Geoff Gill > NT Systems Support Engineer > SAIC > Computer Systems Group > E-Mail: [EMAIL PROTECTED] > Phone: (858) 826-4062 > Pager: (888) 997-9614 -- Reinhard MerschWestfaelische Wilhelms-Universitaet Zentrum fuer Informationsverarbeitung - ehemals Universitaetsrechenzentrum Roentgenstrasse 9-13, D-48149 Muenster, Germany Tel: +49(251)83-31583 E-Mail: [EMAIL PROTECTED] Fax: +49(251)83-31653
Re: Migration doesn't end
My CPU doesn't go to 100%, I have a dual, but the activity is much heavier than normal. My second CPU is usually fairly idle, but it is around 50% during this process, the first CPU is above 80%. After raising the migration values, activity returns to normal, which is 0-15%. === John Monahan Network Team Coordinator Liberty Diversified Industries (763) 536-6677 === "Rushforth, Tim" <[EMAIL PROTECTED]> Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> 02/05/01 04:29 PM Please respond to "ADSM: Dist Stor Manager" To: [EMAIL PROTECTED] cc: Subject:Re: Migration doesn't end Ok, our problem is back! Now, it does bring the pool to 0%. Ken and John, can you verify if we are having the same problem? At the point when migration is not moving any data, does your CPU Utilization go up to 100% and stay there until you raise the Migration values? Thanks, Tim Rushforth City of Winnipeg -Original Message- From: Rushforth, Tim Sent: Thursday, February 01, 2001 5:28 PM To: 'ADSM: Dist Stor Manager' Subject: RE: Migration doesn't end We've had what sounds like a similar problem. In our case, migration would not end, CPU Utilization would hit 100% at a certain point during migration. In our case though there was still data left on the volumes (about .1%). Our problem was fixed by running an AUDIT DB. Tim Rushforth City of Winnipeg -Original Message- From: Kenneth & Susan Bury [mailto:[EMAIL PROTECTED]] Sent: Thursday, February 01, 2001 5:08 PM To: [EMAIL PROTECTED] Subject: Re: Migration doesn't end We have the same problem on our 3.7.4 server. We workaround with the low set for 1%. Ken > -Original Message- > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of > John Monahan > Sent: Thursday, February 01, 2001 17:54 > To: [EMAIL PROTECTED] > Subject: Migration doesn't end > > > TSM Server and clients 4.1.0 NT > > One of my disk pools is performing the never-ending migration process. I'm > migrating from disk to one of two drives in a 3494. Migration is started > by > > update stgpool diskpool hi=0 lo=0 > > after it is started > > update stgpool diskpool hi=90 > > The migration process usually takes around 15 minutes and then the > "migration process X ended for storage pool DISKPOOL" message comes and my > migration values are then set back to hi=90 lo=70. > > For the last couple of days, I have not gotten the migration process has > ended message and the process has been lasting for hours even though when > I query the diskpool, the pct migr value is 0 indicating that all files > have migrated. The only way I have gotten it to stop is to reset my > migration values for the diskpool back to hi=90 lo=70, and then finally > the finished message and the process ends. > > I do have caching enabled on both diskpools, one works fine, the other is > having this problem. It has happened with different drives and tapes, so > that pretty much eliminates a drive or tape problem. Any other ideas? > > > === > John Monahan > Network Team Coordinator > Liberty Diversified Industries > (763) 536-6677 > === >
Re: Migration doesn't end
>Ok, our problem is back! Now, it does bring the pool to 0%. > >Ken and John, can you verify if we are having the same problem? > >At the point when migration is not moving any data, does your CPU >Utilization go up to 100% and stay there until you raise the Migration >values? I have this problem now, it's a holdover from my ADSM 3.1.2.55. The upgrade didn't make that go away. The pool is actually empty, I wonder what is causing it to think something is there. I have not paid attention to the CPU usage when this is going on, however I have done other things with the server during the migration and it seems to answer up normally. In the past I also had to auditdb to fix the problem. Unfortunately the last time that took forever so I can't afford to run it at the moment. I just let it go, when migrate off runs it quits. Geoff Gill NT Systems Support Engineer SAIC Computer Systems Group E-Mail: [EMAIL PROTECTED] Phone: (858) 826-4062 Pager: (888) 997-9614
Re: Migration doesn't end
Ok, our problem is back! Now, it does bring the pool to 0%. Ken and John, can you verify if we are having the same problem? At the point when migration is not moving any data, does your CPU Utilization go up to 100% and stay there until you raise the Migration values? Thanks, Tim Rushforth City of Winnipeg -Original Message- From: Rushforth, Tim Sent: Thursday, February 01, 2001 5:28 PM To: 'ADSM: Dist Stor Manager' Subject: RE: Migration doesn't end We've had what sounds like a similar problem. In our case, migration would not end, CPU Utilization would hit 100% at a certain point during migration. In our case though there was still data left on the volumes (about .1%). Our problem was fixed by running an AUDIT DB. Tim Rushforth City of Winnipeg -Original Message- From: Kenneth & Susan Bury [mailto:[EMAIL PROTECTED]] Sent: Thursday, February 01, 2001 5:08 PM To: [EMAIL PROTECTED] Subject: Re: Migration doesn't end We have the same problem on our 3.7.4 server. We workaround with the low set for 1%. Ken > -Original Message- > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of > John Monahan > Sent: Thursday, February 01, 2001 17:54 > To: [EMAIL PROTECTED] > Subject: Migration doesn't end > > > TSM Server and clients 4.1.0 NT > > One of my disk pools is performing the never-ending migration process. I'm > migrating from disk to one of two drives in a 3494. Migration is started > by > > update stgpool diskpool hi=0 lo=0 > > after it is started > > update stgpool diskpool hi=90 > > The migration process usually takes around 15 minutes and then the > "migration process X ended for storage pool DISKPOOL" message comes and my > migration values are then set back to hi=90 lo=70. > > For the last couple of days, I have not gotten the migration process has > ended message and the process has been lasting for hours even though when > I query the diskpool, the pct migr value is 0 indicating that all files > have migrated. The only way I have gotten it to stop is to reset my > migration values for the diskpool back to hi=90 lo=70, and then finally > the finished message and the process ends. > > I do have caching enabled on both diskpools, one works fine, the other is > having this problem. It has happened with different drives and tapes, so > that pretty much eliminates a drive or tape problem. Any other ideas? > > > === > John Monahan > Network Team Coordinator > Liberty Diversified Industries > (763) 536-6677 > === >
Re: Migration doesn't end
stop storage pool upd stg backuppool high=90 low=60 >>> [EMAIL PROTECTED] 2/1/01 5:53:35 PM >>> TSM Server and clients 4.1.0 NT One of my disk pools is performing the never-ending migration process. I'm migrating from disk to one of two drives in a 3494. Migration is started by update stgpool diskpool hi=0 lo=0 after it is started update stgpool diskpool hi=90 The migration process usually takes around 15 minutes and then the "migration process X ended for storage pool DISKPOOL" message comes and my migration values are then set back to hi=90 lo=70. For the last couple of days, I have not gotten the migration process has ended message and the process has been lasting for hours even though when I query the diskpool, the pct migr value is 0 indicating that all files have migrated. The only way I have gotten it to stop is to reset my migration values for the diskpool back to hi=90 lo=70, and then finally the finished message and the process ends. I do have caching enabled on both diskpools, one works fine, the other is having this problem. It has happened with different drives and tapes, so that pretty much eliminates a drive or tape problem. Any other ideas? === John Monahan Network Team Coordinator Liberty Diversified Industries (763) 536-6677 ===
Re: Migration doesn't end
We've had what sounds like a similar problem. In our case, migration would not end, CPU Utilization would hit 100% at a certain point during migration. In our case though there was still data left on the volumes (about .1%). Our problem was fixed by running an AUDIT DB. Tim Rushforth City of Winnipet -Original Message- From: Kenneth & Susan Bury [mailto:[EMAIL PROTECTED]] Sent: Thursday, February 01, 2001 5:08 PM To: [EMAIL PROTECTED] Subject: Re: Migration doesn't end We have the same problem on our 3.7.4 server. We workaround with the low set for 1%. Ken > -Original Message- > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of > John Monahan > Sent: Thursday, February 01, 2001 17:54 > To: [EMAIL PROTECTED] > Subject: Migration doesn't end > > > TSM Server and clients 4.1.0 NT > > One of my disk pools is performing the never-ending migration process. I'm > migrating from disk to one of two drives in a 3494. Migration is started > by > > update stgpool diskpool hi=0 lo=0 > > after it is started > > update stgpool diskpool hi=90 > > The migration process usually takes around 15 minutes and then the > "migration process X ended for storage pool DISKPOOL" message comes and my > migration values are then set back to hi=90 lo=70. > > For the last couple of days, I have not gotten the migration process has > ended message and the process has been lasting for hours even though when > I query the diskpool, the pct migr value is 0 indicating that all files > have migrated. The only way I have gotten it to stop is to reset my > migration values for the diskpool back to hi=90 lo=70, and then finally > the finished message and the process ends. > > I do have caching enabled on both diskpools, one works fine, the other is > having this problem. It has happened with different drives and tapes, so > that pretty much eliminates a drive or tape problem. Any other ideas? > > > === > John Monahan > Network Team Coordinator > Liberty Diversified Industries > (763) 536-6677 > === >
Re: Migration doesn't end
We have the same problem on our 3.7.4 server. We workaround with the low set for 1%. Ken > -Original Message- > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of > John Monahan > Sent: Thursday, February 01, 2001 17:54 > To: [EMAIL PROTECTED] > Subject: Migration doesn't end > > > TSM Server and clients 4.1.0 NT > > One of my disk pools is performing the never-ending migration process. I'm > migrating from disk to one of two drives in a 3494. Migration is started > by > > update stgpool diskpool hi=0 lo=0 > > after it is started > > update stgpool diskpool hi=90 > > The migration process usually takes around 15 minutes and then the > "migration process X ended for storage pool DISKPOOL" message comes and my > migration values are then set back to hi=90 lo=70. > > For the last couple of days, I have not gotten the migration process has > ended message and the process has been lasting for hours even though when > I query the diskpool, the pct migr value is 0 indicating that all files > have migrated. The only way I have gotten it to stop is to reset my > migration values for the diskpool back to hi=90 lo=70, and then finally > the finished message and the process ends. > > I do have caching enabled on both diskpools, one works fine, the other is > having this problem. It has happened with different drives and tapes, so > that pretty much eliminates a drive or tape problem. Any other ideas? > > > === > John Monahan > Network Team Coordinator > Liberty Diversified Industries > (763) 536-6677 > === >