Re: Unexpected zero impression single day report error
Hi Tim, I'm not certain that the v201003 reporting system will allow you to download the report without error, but it uses a different architecture which I believe does not have the same limits on ad groups, etc. Best, - Eric On Jul 29, 4:56 pm, tozor t...@adlucent.com wrote: Not to drag on this thread indefinitely, but are you saying that I could also get around my current error, if I ran the same type of zero impression report in v201003? Tim On Jul 29, 2:20 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, Thanks for the feedback regarding the account structure report. As an aside, the v201003 ReportDefinitionService takes a different approach, removing account structure reports completely and support zero- impressions for all report types. Report generations is also much faster with this service, so it may be worth exploring. Best, - Eric On Jul 28, 10:52 pm, tozor t...@adlucent.com wrote: Thanks much Eric. One comment I would make is that the Account Structure report is not a complete replacement for the zero impression keyword report because of the fact that first page cpc and quality score are not available in the Account Structure report. This is the main reason I have not switched to it. I have seen other people in this group raise the issue of the lack of support for these two attributes in the structure report. I suspect most application developers who are syncing a database from one of these reports are probably going to require quality score and first page cpc, since these are common attributes to keep in your application database. Hopefully you folks will add these attributes to the Account Structure report in the near future. Tim On Jul 28, 5:07 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, It looks like the problem is that this account has over the advisable number of ad groups for a report with that configuration. Because of an error in the validation logic this limit isn't checked if specific campaignIds are specified in the report job, which is why that configuration doesn't return an error. While this job may be currently succeeding in this configuration, since it is over the limits it might start failing at any time. I would refer you back to my original advice to either segment your data or use the Account Structure report to get this information instead. Best, - Eric On Jul 27, 6:12 pm, tozor t...@adlucent.com wrote: Here is a failed request: 51c8e997ea0e13c961b41e81559a97c8 Thanks. Tim On Jul 27, 5:01 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, Your original failed request from earlier is no longer in the logs. Can you please schedule another of those reports and send me the new requestId? Thanks, - Eric On Jul 27, 2:28 pm, tozor t...@adlucent.com wrote: I made a request with all 106 campaigns and it worked. Here is the request id: ad94b71784836c3a7cfdc6ff2315435b Once again thanks very much for working with me on this issue. Tim On Jul 27, 12:47 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, It looks like the account contains 106 campaigns, if you count the deleted ones, but your second request only includes 75 campaigns. I believe these extra campaigns are causing the report to be over the size limit. Best, - Eric On Jul 26, 2:01 pm, tozor t...@adlucent.com wrote: Here is the one with no campaign ids that fails: 32320c4e46d082fa1c100dbeebcc3b49 Here is the one with all campaign ids that works: 063342a4efc425e78565e94e11d47641 Thanks again. Tim On Jul 26, 9:54 am, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, Can you post the requestIds of the requests used to schedule these reports (the one that fails and the one that succeeds). Perhaps that will shed some light on the issue. Best, - Eric On Jul 23, 5:53 pm, tozor t...@adlucent.com wrote: I appreciate the reply, but doesn't it seem logically inconsistent that I can request the same report with all of the campaign ids and it works? If I leave the campaign ids empty it fails. Wouldn't you agree that it is logically equivalent to either specify all of the campaign ids or leave the campaign ids empty? If you agree, then why does the report fail in one instance and not in the other? Tim
Re: Unexpected zero impression single day report error
Hi Tim, Thanks for the feedback regarding the account structure report. As an aside, the v201003 ReportDefinitionService takes a different approach, removing account structure reports completely and support zero- impressions for all report types. Report generations is also much faster with this service, so it may be worth exploring. Best, - Eric On Jul 28, 10:52 pm, tozor t...@adlucent.com wrote: Thanks much Eric. One comment I would make is that the Account Structure report is not a complete replacement for the zero impression keyword report because of the fact that first page cpc and quality score are not available in the Account Structure report. This is the main reason I have not switched to it. I have seen other people in this group raise the issue of the lack of support for these two attributes in the structure report. I suspect most application developers who are syncing a database from one of these reports are probably going to require quality score and first page cpc, since these are common attributes to keep in your application database. Hopefully you folks will add these attributes to the Account Structure report in the near future. Tim On Jul 28, 5:07 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, It looks like the problem is that this account has over the advisable number of ad groups for a report with that configuration. Because of an error in the validation logic this limit isn't checked if specific campaignIds are specified in the report job, which is why that configuration doesn't return an error. While this job may be currently succeeding in this configuration, since it is over the limits it might start failing at any time. I would refer you back to my original advice to either segment your data or use the Account Structure report to get this information instead. Best, - Eric On Jul 27, 6:12 pm, tozor t...@adlucent.com wrote: Here is a failed request: 51c8e997ea0e13c961b41e81559a97c8 Thanks. Tim On Jul 27, 5:01 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, Your original failed request from earlier is no longer in the logs. Can you please schedule another of those reports and send me the new requestId? Thanks, - Eric On Jul 27, 2:28 pm, tozor t...@adlucent.com wrote: I made a request with all 106 campaigns and it worked. Here is the request id: ad94b71784836c3a7cfdc6ff2315435b Once again thanks very much for working with me on this issue. Tim On Jul 27, 12:47 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, It looks like the account contains 106 campaigns, if you count the deleted ones, but your second request only includes 75 campaigns. I believe these extra campaigns are causing the report to be over the size limit. Best, - Eric On Jul 26, 2:01 pm, tozor t...@adlucent.com wrote: Here is the one with no campaign ids that fails: 32320c4e46d082fa1c100dbeebcc3b49 Here is the one with all campaign ids that works: 063342a4efc425e78565e94e11d47641 Thanks again. Tim On Jul 26, 9:54 am, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, Can you post the requestIds of the requests used to schedule these reports (the one that fails and the one that succeeds). Perhaps that will shed some light on the issue. Best, - Eric On Jul 23, 5:53 pm, tozor t...@adlucent.com wrote: I appreciate the reply, but doesn't it seem logically inconsistent that I can request the same report with all of the campaign ids and it works? If I leave the campaign ids empty it fails. Wouldn't you agree that it is logically equivalent to either specify all of the campaign ids or leave the campaign ids empty? If you agree, then why does the report fail in one instance and not in the other? Tim On Jul 23, 2:27 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, There are many factors that go into deciding whether or not the report is too large, beyond the number of keywords or date range alone. It is likely that there are other factors that would make this report too large. My recommendation at this time would be to split up that report into multiple reports, perhaps segmenting on the campaignId, so that you can get the data you need. Alternatively, you can remove the zero impression option, and use the Account Structure Report to fetch
Re: Unexpected zero impression single day report error
Not to drag on this thread indefinitely, but are you saying that I could also get around my current error, if I ran the same type of zero impression report in v201003? Tim On Jul 29, 2:20 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, Thanks for the feedback regarding the account structure report. As an aside, the v201003 ReportDefinitionService takes a different approach, removing account structure reports completely and support zero- impressions for all report types. Report generations is also much faster with this service, so it may be worth exploring. Best, - Eric On Jul 28, 10:52 pm, tozor t...@adlucent.com wrote: Thanks much Eric. One comment I would make is that the Account Structure report is not a complete replacement for the zero impression keyword report because of the fact that first page cpc and quality score are not available in the Account Structure report. This is the main reason I have not switched to it. I have seen other people in this group raise the issue of the lack of support for these two attributes in the structure report. I suspect most application developers who are syncing a database from one of these reports are probably going to require quality score and first page cpc, since these are common attributes to keep in your application database. Hopefully you folks will add these attributes to the Account Structure report in the near future. Tim On Jul 28, 5:07 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, It looks like the problem is that this account has over the advisable number of ad groups for a report with that configuration. Because of an error in the validation logic this limit isn't checked if specific campaignIds are specified in the report job, which is why that configuration doesn't return an error. While this job may be currently succeeding in this configuration, since it is over the limits it might start failing at any time. I would refer you back to my original advice to either segment your data or use the Account Structure report to get this information instead. Best, - Eric On Jul 27, 6:12 pm, tozor t...@adlucent.com wrote: Here is a failed request: 51c8e997ea0e13c961b41e81559a97c8 Thanks. Tim On Jul 27, 5:01 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, Your original failed request from earlier is no longer in the logs. Can you please schedule another of those reports and send me the new requestId? Thanks, - Eric On Jul 27, 2:28 pm, tozor t...@adlucent.com wrote: I made a request with all 106 campaigns and it worked. Here is the request id: ad94b71784836c3a7cfdc6ff2315435b Once again thanks very much for working with me on this issue. Tim On Jul 27, 12:47 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, It looks like the account contains 106 campaigns, if you count the deleted ones, but your second request only includes 75 campaigns. I believe these extra campaigns are causing the report to be over the size limit. Best, - Eric On Jul 26, 2:01 pm, tozor t...@adlucent.com wrote: Here is the one with no campaign ids that fails: 32320c4e46d082fa1c100dbeebcc3b49 Here is the one with all campaign ids that works: 063342a4efc425e78565e94e11d47641 Thanks again. Tim On Jul 26, 9:54 am, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, Can you post the requestIds of the requests used to schedule these reports (the one that fails and the one that succeeds). Perhaps that will shed some light on the issue. Best, - Eric On Jul 23, 5:53 pm, tozor t...@adlucent.com wrote: I appreciate the reply, but doesn't it seem logically inconsistent that I can request the same report with all of the campaign ids and it works? If I leave the campaign ids empty it fails. Wouldn't you agree that it is logically equivalent to either specify all of the campaign ids or leave the campaign ids empty? If you agree, then why does the report fail in one instance and not in the other? Tim On Jul 23, 2:27 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, There are many factors that go into deciding whether or not the report is too large, beyond the number of keywords or date range alone. It is likely that there are other factors that would make this report
Re: Unexpected zero impression single day report error
Hi Tim, It looks like the problem is that this account has over the advisable number of ad groups for a report with that configuration. Because of an error in the validation logic this limit isn't checked if specific campaignIds are specified in the report job, which is why that configuration doesn't return an error. While this job may be currently succeeding in this configuration, since it is over the limits it might start failing at any time. I would refer you back to my original advice to either segment your data or use the Account Structure report to get this information instead. Best, - Eric On Jul 27, 6:12 pm, tozor t...@adlucent.com wrote: Here is a failed request: 51c8e997ea0e13c961b41e81559a97c8 Thanks. Tim On Jul 27, 5:01 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, Your original failed request from earlier is no longer in the logs. Can you please schedule another of those reports and send me the new requestId? Thanks, - Eric On Jul 27, 2:28 pm, tozor t...@adlucent.com wrote: I made a request with all 106 campaigns and it worked. Here is the request id: ad94b71784836c3a7cfdc6ff2315435b Once again thanks very much for working with me on this issue. Tim On Jul 27, 12:47 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, It looks like the account contains 106 campaigns, if you count the deleted ones, but your second request only includes 75 campaigns. I believe these extra campaigns are causing the report to be over the size limit. Best, - Eric On Jul 26, 2:01 pm, tozor t...@adlucent.com wrote: Here is the one with no campaign ids that fails: 32320c4e46d082fa1c100dbeebcc3b49 Here is the one with all campaign ids that works: 063342a4efc425e78565e94e11d47641 Thanks again. Tim On Jul 26, 9:54 am, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, Can you post the requestIds of the requests used to schedule these reports (the one that fails and the one that succeeds). Perhaps that will shed some light on the issue. Best, - Eric On Jul 23, 5:53 pm, tozor t...@adlucent.com wrote: I appreciate the reply, but doesn't it seem logically inconsistent that I can request the same report with all of the campaign ids and it works? If I leave the campaign ids empty it fails. Wouldn't you agree that it is logically equivalent to either specify all of the campaign ids or leave the campaign ids empty? If you agree, then why does the report fail in one instance and not in the other? Tim On Jul 23, 2:27 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, There are many factors that go into deciding whether or not the report is too large, beyond the number of keywords or date range alone. It is likely that there are other factors that would make this report too large. My recommendation at this time would be to split up that report into multiple reports, perhaps segmenting on the campaignId, so that you can get the data you need. Alternatively, you can remove the zero impression option, and use the Account Structure Report to fetch information about all of the keywords in the account. Best, - Eric On Jul 23, 8:33 am, tozor t...@adlucent.com wrote: This remains an issue for my application and the account in question. Is there additional information I can provide to get a resolution to this issue? There must be a heuristic on the Adwords back end which is trying to make sure that a user does not request a report that is too large/expensive to generate, and it seems for some reason this heuristic is rejecting a zero impression report (again for a single day) on this account. Seems like there is a bug on the back end which is somehow being triggered by the structure of this account. This problem is reproducible at will, so please let me know what I can do to help get the issue resolved on your end. I do have a workaround (to include all of the campaign ids in the zero impression report request) but it is not optimal for me because of how our application is structured. I am hoping to get the core issue fixed. Thanks again. Tim On Jul 13, 7:20 pm, tozor t...@adlucent.com wrote: When I notice the problem it is for azeroimpressionreport for the current day. Tim On Jul
Re: Unexpected zero impression single day report error
Thanks much Eric. One comment I would make is that the Account Structure report is not a complete replacement for the zero impression keyword report because of the fact that first page cpc and quality score are not available in the Account Structure report. This is the main reason I have not switched to it. I have seen other people in this group raise the issue of the lack of support for these two attributes in the structure report. I suspect most application developers who are syncing a database from one of these reports are probably going to require quality score and first page cpc, since these are common attributes to keep in your application database. Hopefully you folks will add these attributes to the Account Structure report in the near future. Tim On Jul 28, 5:07 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, It looks like the problem is that this account has over the advisable number of ad groups for a report with that configuration. Because of an error in the validation logic this limit isn't checked if specific campaignIds are specified in the report job, which is why that configuration doesn't return an error. While this job may be currently succeeding in this configuration, since it is over the limits it might start failing at any time. I would refer you back to my original advice to either segment your data or use the Account Structure report to get this information instead. Best, - Eric On Jul 27, 6:12 pm, tozor t...@adlucent.com wrote: Here is a failed request: 51c8e997ea0e13c961b41e81559a97c8 Thanks. Tim On Jul 27, 5:01 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, Your original failed request from earlier is no longer in the logs. Can you please schedule another of those reports and send me the new requestId? Thanks, - Eric On Jul 27, 2:28 pm, tozor t...@adlucent.com wrote: I made a request with all 106 campaigns and it worked. Here is the request id: ad94b71784836c3a7cfdc6ff2315435b Once again thanks very much for working with me on this issue. Tim On Jul 27, 12:47 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, It looks like the account contains 106 campaigns, if you count the deleted ones, but your second request only includes 75 campaigns. I believe these extra campaigns are causing the report to be over the size limit. Best, - Eric On Jul 26, 2:01 pm, tozor t...@adlucent.com wrote: Here is the one with no campaign ids that fails: 32320c4e46d082fa1c100dbeebcc3b49 Here is the one with all campaign ids that works: 063342a4efc425e78565e94e11d47641 Thanks again. Tim On Jul 26, 9:54 am, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, Can you post the requestIds of the requests used to schedule these reports (the one that fails and the one that succeeds). Perhaps that will shed some light on the issue. Best, - Eric On Jul 23, 5:53 pm, tozor t...@adlucent.com wrote: I appreciate the reply, but doesn't it seem logically inconsistent that I can request the same report with all of the campaign ids and it works? If I leave the campaign ids empty it fails. Wouldn't you agree that it is logically equivalent to either specify all of the campaign ids or leave the campaign ids empty? If you agree, then why does the report fail in one instance and not in the other? Tim On Jul 23, 2:27 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, There are many factors that go into deciding whether or not the report is too large, beyond the number of keywords or date range alone. It is likely that there are other factors that would make this report too large. My recommendation at this time would be to split up that report into multiple reports, perhaps segmenting on the campaignId, so that you can get the data you need. Alternatively, you can remove the zero impression option, and use the Account Structure Report to fetch information about all of the keywords in the account. Best, - Eric On Jul 23, 8:33 am, tozor t...@adlucent.com wrote: This remains an issue for my application and the account in question. Is there additional information I can provide to get a resolution to this issue? There must be a heuristic on the Adwords back end which is trying to make sure that a user does not request a report that is too
Re: Unexpected zero impression single day report error
Hi Tim, It looks like the account contains 106 campaigns, if you count the deleted ones, but your second request only includes 75 campaigns. I believe these extra campaigns are causing the report to be over the size limit. Best, - Eric On Jul 26, 2:01 pm, tozor t...@adlucent.com wrote: Here is the one with no campaign ids that fails: 32320c4e46d082fa1c100dbeebcc3b49 Here is the one with all campaign ids that works: 063342a4efc425e78565e94e11d47641 Thanks again. Tim On Jul 26, 9:54 am, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, Can you post the requestIds of the requests used to schedule these reports (the one that fails and the one that succeeds). Perhaps that will shed some light on the issue. Best, - Eric On Jul 23, 5:53 pm, tozor t...@adlucent.com wrote: I appreciate the reply, but doesn't it seem logically inconsistent that I can request the same report with all of the campaign ids and it works? If I leave the campaign ids empty it fails. Wouldn't you agree that it is logically equivalent to either specify all of the campaign ids or leave the campaign ids empty? If you agree, then why does the report fail in one instance and not in the other? Tim On Jul 23, 2:27 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, There are many factors that go into deciding whether or not the report is too large, beyond the number of keywords or date range alone. It is likely that there are other factors that would make this report too large. My recommendation at this time would be to split up that report into multiple reports, perhaps segmenting on the campaignId, so that you can get the data you need. Alternatively, you can remove the zero impression option, and use the Account Structure Report to fetch information about all of the keywords in the account. Best, - Eric On Jul 23, 8:33 am, tozor t...@adlucent.com wrote: This remains an issue for my application and the account in question. Is there additional information I can provide to get a resolution to this issue? There must be a heuristic on the Adwords back end which is trying to make sure that a user does not request a report that is too large/expensive to generate, and it seems for some reason this heuristic is rejecting a zero impression report (again for a single day) on this account. Seems like there is a bug on the back end which is somehow being triggered by the structure of this account. This problem is reproducible at will, so please let me know what I can do to help get the issue resolved on your end. I do have a workaround (to include all of the campaign ids in the zero impression report request) but it is not optimal for me because of how our application is structured. I am hoping to get the core issue fixed. Thanks again. Tim On Jul 13, 7:20 pm, tozor t...@adlucent.com wrote: When I notice the problem it is for azeroimpressionreport for the current day. Tim On Jul 13, 5:55 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, Are you noticing this for one day in particular, or is it happening for any day chosen? Best, - Eric Koleda, AdWords API Team On Jul 12, 9:27 am, tozor t...@adlucent.com wrote: I get the followingunexpectederror when trying to run azero impressionkeyword report: AxisFault faultCode: {http://schemas.xmlsoap.org/soap/envelope/} Server.userException faultSubcode: faultString: IncludingZeroImpressionKeywords will make your report too large to run. To include this data, please narrow the scope of other report settings in this request (such as your View, Date Range, or Campaign/Ad Group selections). faultActor: faultNode: faultDetail: {https://adwords.google.com/api/adwords/v13}fault: ns1:code112/ns1:code ns1:messageIncludingZeroImpressionKeywords will make your report too large to run. To include this data, please narrow the scope of other report settings in this request (such as your View, Date Range, or Campaign/Ad Group selections)./ns1:message The reason this error isunexpectedto me is that the date range I am using is for a single day. Furthermore the account, while large, is nowhere near as large as many of the other accounts that our application manages. This account has about 400K keywords, but our application manages several accounts that are twice that size and we have never had an issue getting a single
Re: Unexpected zero impression single day report error
I made a request with all 106 campaigns and it worked. Here is the request id: ad94b71784836c3a7cfdc6ff2315435b Once again thanks very much for working with me on this issue. Tim On Jul 27, 12:47 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, It looks like the account contains 106 campaigns, if you count the deleted ones, but your second request only includes 75 campaigns. I believe these extra campaigns are causing the report to be over the size limit. Best, - Eric On Jul 26, 2:01 pm, tozor t...@adlucent.com wrote: Here is the one with no campaign ids that fails: 32320c4e46d082fa1c100dbeebcc3b49 Here is the one with all campaign ids that works: 063342a4efc425e78565e94e11d47641 Thanks again. Tim On Jul 26, 9:54 am, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, Can you post the requestIds of the requests used to schedule these reports (the one that fails and the one that succeeds). Perhaps that will shed some light on the issue. Best, - Eric On Jul 23, 5:53 pm, tozor t...@adlucent.com wrote: I appreciate the reply, but doesn't it seem logically inconsistent that I can request the same report with all of the campaign ids and it works? If I leave the campaign ids empty it fails. Wouldn't you agree that it is logically equivalent to either specify all of the campaign ids or leave the campaign ids empty? If you agree, then why does the report fail in one instance and not in the other? Tim On Jul 23, 2:27 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, There are many factors that go into deciding whether or not the report is too large, beyond the number of keywords or date range alone. It is likely that there are other factors that would make this report too large. My recommendation at this time would be to split up that report into multiple reports, perhaps segmenting on the campaignId, so that you can get the data you need. Alternatively, you can remove the zero impression option, and use the Account Structure Report to fetch information about all of the keywords in the account. Best, - Eric On Jul 23, 8:33 am, tozor t...@adlucent.com wrote: This remains an issue for my application and the account in question. Is there additional information I can provide to get a resolution to this issue? There must be a heuristic on the Adwords back end which is trying to make sure that a user does not request a report that is too large/expensive to generate, and it seems for some reason this heuristic is rejecting a zero impression report (again for a single day) on this account. Seems like there is a bug on the back end which is somehow being triggered by the structure of this account. This problem is reproducible at will, so please let me know what I can do to help get the issue resolved on your end. I do have a workaround (to include all of the campaign ids in the zero impression report request) but it is not optimal for me because of how our application is structured. I am hoping to get the core issue fixed. Thanks again. Tim On Jul 13, 7:20 pm, tozor t...@adlucent.com wrote: When I notice the problem it is for azeroimpressionreport for the current day. Tim On Jul 13, 5:55 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, Are you noticing this for one day in particular, or is it happening for any day chosen? Best, - Eric Koleda, AdWords API Team On Jul 12, 9:27 am, tozor t...@adlucent.com wrote: I get the followingunexpectederror when trying to run azero impressionkeyword report: AxisFault faultCode: {http://schemas.xmlsoap.org/soap/envelope/} Server.userException faultSubcode: faultString: IncludingZeroImpressionKeywords will make your report too large to run. To include this data, please narrow the scope of other report settings in this request (such as your View, Date Range, or Campaign/Ad Group selections). faultActor: faultNode: faultDetail: {https://adwords.google.com/api/adwords/v13}fault: ns1:code112/ns1:code ns1:messageIncludingZeroImpressionKeywords will make your report too large to run. To include this data, please narrow the scope of other report settings in this request (such as your View, Date Range, or Campaign/Ad Group selections)./ns1:message The reason this error isunexpectedto me is that the date range I am
Re: Unexpected zero impression single day report error
Hi Tim, Your original failed request from earlier is no longer in the logs. Can you please schedule another of those reports and send me the new requestId? Thanks, - Eric On Jul 27, 2:28 pm, tozor t...@adlucent.com wrote: I made a request with all 106 campaigns and it worked. Here is the request id: ad94b71784836c3a7cfdc6ff2315435b Once again thanks very much for working with me on this issue. Tim On Jul 27, 12:47 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, It looks like the account contains 106 campaigns, if you count the deleted ones, but your second request only includes 75 campaigns. I believe these extra campaigns are causing the report to be over the size limit. Best, - Eric On Jul 26, 2:01 pm, tozor t...@adlucent.com wrote: Here is the one with no campaign ids that fails: 32320c4e46d082fa1c100dbeebcc3b49 Here is the one with all campaign ids that works: 063342a4efc425e78565e94e11d47641 Thanks again. Tim On Jul 26, 9:54 am, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, Can you post the requestIds of the requests used to schedule these reports (the one that fails and the one that succeeds). Perhaps that will shed some light on the issue. Best, - Eric On Jul 23, 5:53 pm, tozor t...@adlucent.com wrote: I appreciate the reply, but doesn't it seem logically inconsistent that I can request the same report with all of the campaign ids and it works? If I leave the campaign ids empty it fails. Wouldn't you agree that it is logically equivalent to either specify all of the campaign ids or leave the campaign ids empty? If you agree, then why does the report fail in one instance and not in the other? Tim On Jul 23, 2:27 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, There are many factors that go into deciding whether or not the report is too large, beyond the number of keywords or date range alone. It is likely that there are other factors that would make this report too large. My recommendation at this time would be to split up that report into multiple reports, perhaps segmenting on the campaignId, so that you can get the data you need. Alternatively, you can remove the zero impression option, and use the Account Structure Report to fetch information about all of the keywords in the account. Best, - Eric On Jul 23, 8:33 am, tozor t...@adlucent.com wrote: This remains an issue for my application and the account in question. Is there additional information I can provide to get a resolution to this issue? There must be a heuristic on the Adwords back end which is trying to make sure that a user does not request a report that is too large/expensive to generate, and it seems for some reason this heuristic is rejecting a zero impression report (again for a single day) on this account. Seems like there is a bug on the back end which is somehow being triggered by the structure of this account. This problem is reproducible at will, so please let me know what I can do to help get the issue resolved on your end. I do have a workaround (to include all of the campaign ids in the zero impression report request) but it is not optimal for me because of how our application is structured. I am hoping to get the core issue fixed. Thanks again. Tim On Jul 13, 7:20 pm, tozor t...@adlucent.com wrote: When I notice the problem it is for azeroimpressionreport for the current day. Tim On Jul 13, 5:55 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, Are you noticing this for one day in particular, or is it happening for any day chosen? Best, - Eric Koleda, AdWords API Team On Jul 12, 9:27 am, tozor t...@adlucent.com wrote: I get the followingunexpectederror when trying to run azero impressionkeyword report: AxisFault faultCode: {http://schemas.xmlsoap.org/soap/envelope/} Server.userException faultSubcode: faultString: IncludingZeroImpressionKeywords will make your report too large to run. To include this data, please narrow the scope of other report settings in this request (such as your View, Date Range, or Campaign/Ad Group selections). faultActor: faultNode: faultDetail: {https://adwords.google.com/api/adwords/v13}fault: ns1:code112/ns1:code
Re: Unexpected zero impression single day report error
Hi Tim, Can you post the requestIds of the requests used to schedule these reports (the one that fails and the one that succeeds). Perhaps that will shed some light on the issue. Best, - Eric On Jul 23, 5:53 pm, tozor t...@adlucent.com wrote: I appreciate the reply, but doesn't it seem logically inconsistent that I can request the same report with all of the campaign ids and it works? If I leave the campaign ids empty it fails. Wouldn't you agree that it is logically equivalent to either specify all of the campaign ids or leave the campaign ids empty? If you agree, then why does the report fail in one instance and not in the other? Tim On Jul 23, 2:27 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, There are many factors that go into deciding whether or not the report is too large, beyond the number of keywords or date range alone. It is likely that there are other factors that would make this report too large. My recommendation at this time would be to split up that report into multiple reports, perhaps segmenting on the campaignId, so that you can get the data you need. Alternatively, you can remove the zero impression option, and use the Account Structure Report to fetch information about all of the keywords in the account. Best, - Eric On Jul 23, 8:33 am, tozor t...@adlucent.com wrote: This remains an issue for my application and the account in question. Is there additional information I can provide to get a resolution to this issue? There must be a heuristic on the Adwords back end which is trying to make sure that a user does not request a report that is too large/expensive to generate, and it seems for some reason this heuristic is rejecting a zero impression report (again for a single day) on this account. Seems like there is a bug on the back end which is somehow being triggered by the structure of this account. This problem is reproducible at will, so please let me know what I can do to help get the issue resolved on your end. I do have a workaround (to include all of the campaign ids in the zero impression report request) but it is not optimal for me because of how our application is structured. I am hoping to get the core issue fixed. Thanks again. Tim On Jul 13, 7:20 pm, tozor t...@adlucent.com wrote: When I notice the problem it is for azeroimpressionreport for the current day. Tim On Jul 13, 5:55 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, Are you noticing this for one day in particular, or is it happening for any day chosen? Best, - Eric Koleda, AdWords API Team On Jul 12, 9:27 am, tozor t...@adlucent.com wrote: I get the followingunexpectederror when trying to run azero impressionkeyword report: AxisFault faultCode: {http://schemas.xmlsoap.org/soap/envelope/} Server.userException faultSubcode: faultString: IncludingZeroImpressionKeywords will make your report too large to run. To include this data, please narrow the scope of other report settings in this request (such as your View, Date Range, or Campaign/Ad Group selections). faultActor: faultNode: faultDetail: {https://adwords.google.com/api/adwords/v13}fault: ns1:code112/ns1:code ns1:messageIncludingZeroImpressionKeywords will make your report too large to run. To include this data, please narrow the scope of other report settings in this request (such as your View, Date Range, or Campaign/Ad Group selections)./ns1:message The reason this error isunexpectedto me is that the date range I am using is for a single day. Furthermore the account, while large, is nowhere near as large as many of the other accounts that our application manages. This account has about 400K keywords, but our application manages several accounts that are twice that size and we have never had an issue getting a single dayzeroimpressionreport. The other strange issue is that I can change my report request to include all of the campaign ids in the account and the report runs correctly. So I am still able to get the report that I wanted (azero impressionreport for the entire account) but I can't do it if I leave the DefinedReportJob.campaigns field empty. However leaving the field empty and setting it to all of the campaign ids in the account is functionally equivalent. Thanks in advance for any words of wisdom on this issue. Tim -- =~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~ Also find us on our blog and discussion group: http://adwordsapi.blogspot.com http://groups.google.com/group/adwords-api =~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~ You received this message
Re: Unexpected zero impression single day report error
Here is the one with no campaign ids that fails: 32320c4e46d082fa1c100dbeebcc3b49 Here is the one with all campaign ids that works: 063342a4efc425e78565e94e11d47641 Thanks again. Tim On Jul 26, 9:54 am, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, Can you post the requestIds of the requests used to schedule these reports (the one that fails and the one that succeeds). Perhaps that will shed some light on the issue. Best, - Eric On Jul 23, 5:53 pm, tozor t...@adlucent.com wrote: I appreciate the reply, but doesn't it seem logically inconsistent that I can request the same report with all of the campaign ids and it works? If I leave the campaign ids empty it fails. Wouldn't you agree that it is logically equivalent to either specify all of the campaign ids or leave the campaign ids empty? If you agree, then why does the report fail in one instance and not in the other? Tim On Jul 23, 2:27 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, There are many factors that go into deciding whether or not the report is too large, beyond the number of keywords or date range alone. It is likely that there are other factors that would make this report too large. My recommendation at this time would be to split up that report into multiple reports, perhaps segmenting on the campaignId, so that you can get the data you need. Alternatively, you can remove the zero impression option, and use the Account Structure Report to fetch information about all of the keywords in the account. Best, - Eric On Jul 23, 8:33 am, tozor t...@adlucent.com wrote: This remains an issue for my application and the account in question. Is there additional information I can provide to get a resolution to this issue? There must be a heuristic on the Adwords back end which is trying to make sure that a user does not request a report that is too large/expensive to generate, and it seems for some reason this heuristic is rejecting a zero impression report (again for a single day) on this account. Seems like there is a bug on the back end which is somehow being triggered by the structure of this account. This problem is reproducible at will, so please let me know what I can do to help get the issue resolved on your end. I do have a workaround (to include all of the campaign ids in the zero impression report request) but it is not optimal for me because of how our application is structured. I am hoping to get the core issue fixed. Thanks again. Tim On Jul 13, 7:20 pm, tozor t...@adlucent.com wrote: When I notice the problem it is for azeroimpressionreport for the current day. Tim On Jul 13, 5:55 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, Are you noticing this for one day in particular, or is it happening for any day chosen? Best, - Eric Koleda, AdWords API Team On Jul 12, 9:27 am, tozor t...@adlucent.com wrote: I get the followingunexpectederror when trying to run azero impressionkeyword report: AxisFault faultCode: {http://schemas.xmlsoap.org/soap/envelope/} Server.userException faultSubcode: faultString: IncludingZeroImpressionKeywords will make your report too large to run. To include this data, please narrow the scope of other report settings in this request (such as your View, Date Range, or Campaign/Ad Group selections). faultActor: faultNode: faultDetail: {https://adwords.google.com/api/adwords/v13}fault: ns1:code112/ns1:code ns1:messageIncludingZeroImpressionKeywords will make your report too large to run. To include this data, please narrow the scope of other report settings in this request (such as your View, Date Range, or Campaign/Ad Group selections)./ns1:message The reason this error isunexpectedto me is that the date range I am using is for a single day. Furthermore the account, while large, is nowhere near as large as many of the other accounts that our application manages. This account has about 400K keywords, but our application manages several accounts that are twice that size and we have never had an issue getting a single dayzeroimpressionreport. The other strange issue is that I can change my report request to include all of the campaign ids in the account and the report runs correctly. So I am still able to get the report that I wanted (azero impressionreport for the entire account) but I can't do it if I leave the DefinedReportJob.campaigns field empty. However leaving the field empty and setting
Re: Unexpected zero impression single day report error
This remains an issue for my application and the account in question. Is there additional information I can provide to get a resolution to this issue? There must be a heuristic on the Adwords back end which is trying to make sure that a user does not request a report that is too large/expensive to generate, and it seems for some reason this heuristic is rejecting a zero impression report (again for a single day) on this account. Seems like there is a bug on the back end which is somehow being triggered by the structure of this account. This problem is reproducible at will, so please let me know what I can do to help get the issue resolved on your end. I do have a workaround (to include all of the campaign ids in the zero impression report request) but it is not optimal for me because of how our application is structured. I am hoping to get the core issue fixed. Thanks again. Tim On Jul 13, 7:20 pm, tozor t...@adlucent.com wrote: When I notice the problem it is for azeroimpressionreport for the current day. Tim On Jul 13, 5:55 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, Are you noticing this for one day in particular, or is it happening for any day chosen? Best, - Eric Koleda, AdWords API Team On Jul 12, 9:27 am, tozor t...@adlucent.com wrote: I get the followingunexpectederror when trying to run azero impressionkeyword report: AxisFault faultCode: {http://schemas.xmlsoap.org/soap/envelope/} Server.userException faultSubcode: faultString: IncludingZeroImpressionKeywords will make your report too large to run. To include this data, please narrow the scope of other report settings in this request (such as your View, Date Range, or Campaign/Ad Group selections). faultActor: faultNode: faultDetail: {https://adwords.google.com/api/adwords/v13}fault: ns1:code112/ns1:code ns1:messageIncludingZeroImpressionKeywords will make your report too large to run. To include this data, please narrow the scope of other report settings in this request (such as your View, Date Range, or Campaign/Ad Group selections)./ns1:message The reason this error isunexpectedto me is that the date range I am using is for a single day. Furthermore the account, while large, is nowhere near as large as many of the other accounts that our application manages. This account has about 400K keywords, but our application manages several accounts that are twice that size and we have never had an issue getting a single dayzeroimpressionreport. The other strange issue is that I can change my report request to include all of the campaign ids in the account and the report runs correctly. So I am still able to get the report that I wanted (azero impressionreport for the entire account) but I can't do it if I leave the DefinedReportJob.campaigns field empty. However leaving the field empty and setting it to all of the campaign ids in the account is functionally equivalent. Thanks in advance for any words of wisdom on this issue. Tim -- =~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~ Also find us on our blog and discussion group: http://adwordsapi.blogspot.com http://groups.google.com/group/adwords-api =~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~ You received this message because you are subscribed to the Google Groups AdWords API Forum group. To post to this group, send email to adwords-api@googlegroups.com To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en
Re: Unexpected zero impression single day report error
Hi Tim, There are many factors that go into deciding whether or not the report is too large, beyond the number of keywords or date range alone. It is likely that there are other factors that would make this report too large. My recommendation at this time would be to split up that report into multiple reports, perhaps segmenting on the campaignId, so that you can get the data you need. Alternatively, you can remove the zero impression option, and use the Account Structure Report to fetch information about all of the keywords in the account. Best, - Eric On Jul 23, 8:33 am, tozor t...@adlucent.com wrote: This remains an issue for my application and the account in question. Is there additional information I can provide to get a resolution to this issue? There must be a heuristic on the Adwords back end which is trying to make sure that a user does not request a report that is too large/expensive to generate, and it seems for some reason this heuristic is rejecting a zero impression report (again for a single day) on this account. Seems like there is a bug on the back end which is somehow being triggered by the structure of this account. This problem is reproducible at will, so please let me know what I can do to help get the issue resolved on your end. I do have a workaround (to include all of the campaign ids in the zero impression report request) but it is not optimal for me because of how our application is structured. I am hoping to get the core issue fixed. Thanks again. Tim On Jul 13, 7:20 pm, tozor t...@adlucent.com wrote: When I notice the problem it is for azeroimpressionreport for the current day. Tim On Jul 13, 5:55 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, Are you noticing this for one day in particular, or is it happening for any day chosen? Best, - Eric Koleda, AdWords API Team On Jul 12, 9:27 am, tozor t...@adlucent.com wrote: I get the followingunexpectederror when trying to run azero impressionkeyword report: AxisFault faultCode: {http://schemas.xmlsoap.org/soap/envelope/} Server.userException faultSubcode: faultString: IncludingZeroImpressionKeywords will make your report too large to run. To include this data, please narrow the scope of other report settings in this request (such as your View, Date Range, or Campaign/Ad Group selections). faultActor: faultNode: faultDetail: {https://adwords.google.com/api/adwords/v13}fault: ns1:code112/ns1:code ns1:messageIncludingZeroImpressionKeywords will make your report too large to run. To include this data, please narrow the scope of other report settings in this request (such as your View, Date Range, or Campaign/Ad Group selections)./ns1:message The reason this error isunexpectedto me is that the date range I am using is for a single day. Furthermore the account, while large, is nowhere near as large as many of the other accounts that our application manages. This account has about 400K keywords, but our application manages several accounts that are twice that size and we have never had an issue getting a single dayzeroimpressionreport. The other strange issue is that I can change my report request to include all of the campaign ids in the account and the report runs correctly. So I am still able to get the report that I wanted (azero impressionreport for the entire account) but I can't do it if I leave the DefinedReportJob.campaigns field empty. However leaving the field empty and setting it to all of the campaign ids in the account is functionally equivalent. Thanks in advance for any words of wisdom on this issue. Tim -- =~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~ Also find us on our blog and discussion group: http://adwordsapi.blogspot.com http://groups.google.com/group/adwords-api =~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~ You received this message because you are subscribed to the Google Groups AdWords API Forum group. To post to this group, send email to adwords-api@googlegroups.com To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en
Re: Unexpected zero impression single day report error
I appreciate the reply, but doesn't it seem logically inconsistent that I can request the same report with all of the campaign ids and it works? If I leave the campaign ids empty it fails. Wouldn't you agree that it is logically equivalent to either specify all of the campaign ids or leave the campaign ids empty? If you agree, then why does the report fail in one instance and not in the other? Tim On Jul 23, 2:27 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, There are many factors that go into deciding whether or not the report is too large, beyond the number of keywords or date range alone. It is likely that there are other factors that would make this report too large. My recommendation at this time would be to split up that report into multiple reports, perhaps segmenting on the campaignId, so that you can get the data you need. Alternatively, you can remove the zero impression option, and use the Account Structure Report to fetch information about all of the keywords in the account. Best, - Eric On Jul 23, 8:33 am, tozor t...@adlucent.com wrote: This remains an issue for my application and the account in question. Is there additional information I can provide to get a resolution to this issue? There must be a heuristic on the Adwords back end which is trying to make sure that a user does not request a report that is too large/expensive to generate, and it seems for some reason this heuristic is rejecting a zero impression report (again for a single day) on this account. Seems like there is a bug on the back end which is somehow being triggered by the structure of this account. This problem is reproducible at will, so please let me know what I can do to help get the issue resolved on your end. I do have a workaround (to include all of the campaign ids in the zero impression report request) but it is not optimal for me because of how our application is structured. I am hoping to get the core issue fixed. Thanks again. Tim On Jul 13, 7:20 pm, tozor t...@adlucent.com wrote: When I notice the problem it is for azeroimpressionreport for the current day. Tim On Jul 13, 5:55 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, Are you noticing this for one day in particular, or is it happening for any day chosen? Best, - Eric Koleda, AdWords API Team On Jul 12, 9:27 am, tozor t...@adlucent.com wrote: I get the followingunexpectederror when trying to run azero impressionkeyword report: AxisFault faultCode: {http://schemas.xmlsoap.org/soap/envelope/} Server.userException faultSubcode: faultString: IncludingZeroImpressionKeywords will make your report too large to run. To include this data, please narrow the scope of other report settings in this request (such as your View, Date Range, or Campaign/Ad Group selections). faultActor: faultNode: faultDetail: {https://adwords.google.com/api/adwords/v13}fault: ns1:code112/ns1:code ns1:messageIncludingZeroImpressionKeywords will make your report too large to run. To include this data, please narrow the scope of other report settings in this request (such as your View, Date Range, or Campaign/Ad Group selections)./ns1:message The reason this error isunexpectedto me is that the date range I am using is for a single day. Furthermore the account, while large, is nowhere near as large as many of the other accounts that our application manages. This account has about 400K keywords, but our application manages several accounts that are twice that size and we have never had an issue getting a single dayzeroimpressionreport. The other strange issue is that I can change my report request to include all of the campaign ids in the account and the report runs correctly. So I am still able to get the report that I wanted (azero impressionreport for the entire account) but I can't do it if I leave the DefinedReportJob.campaigns field empty. However leaving the field empty and setting it to all of the campaign ids in the account is functionally equivalent. Thanks in advance for any words of wisdom on this issue. Tim -- =~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~ Also find us on our blog and discussion group: http://adwordsapi.blogspot.com http://groups.google.com/group/adwords-api =~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~ You received this message because you are subscribed to the Google Groups AdWords API Forum group. To post to this group, send email to adwords-api@googlegroups.com To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en
Re: Unexpected zero impression single day report error
Hi Tim, Are you noticing this for one day in particular, or is it happening for any day chosen? Best, - Eric Koleda, AdWords API Team On Jul 12, 9:27 am, tozor t...@adlucent.com wrote: I get the following unexpected error when trying to run a zero impression keyword report: AxisFault faultCode: {http://schemas.xmlsoap.org/soap/envelope/} Server.userException faultSubcode: faultString: Including Zero Impression Keywords will make your report too large to run. To include this data, please narrow the scope of other report settings in this request (such as your View, Date Range, or Campaign/Ad Group selections). faultActor: faultNode: faultDetail: {https://adwords.google.com/api/adwords/v13}fault: ns1:code112/ns1:code ns1:messageIncluding Zero Impression Keywords will make your report too large to run. To include this data, please narrow the scope of other report settings in this request (such as your View, Date Range, or Campaign/Ad Group selections)./ns1:message The reason this error is unexpected to me is that the date range I am using is for a single day. Furthermore the account, while large, is nowhere near as large as many of the other accounts that our application manages. This account has about 400K keywords, but our application manages several accounts that are twice that size and we have never had an issue getting a single day zero impression report. The other strange issue is that I can change my report request to include all of the campaign ids in the account and the report runs correctly. So I am still able to get the report that I wanted (a zero impression report for the entire account) but I can't do it if I leave the DefinedReportJob.campaigns field empty. However leaving the field empty and setting it to all of the campaign ids in the account is functionally equivalent. Thanks in advance for any words of wisdom on this issue. Tim -- =~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~ Also find us on our blog and discussion group: http://adwordsapi.blogspot.com http://groups.google.com/group/adwords-api =~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~ You received this message because you are subscribed to the Google Groups AdWords API Forum group. To post to this group, send email to adwords-api@googlegroups.com To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en
Re: Unexpected zero impression single day report error
When I notice the problem it is for a zero impression report for the current day. Tim On Jul 13, 5:55 pm, AdWords API Advisor adwordsapiadvi...@google.com wrote: Hi Tim, Are you noticing this for one day in particular, or is it happening for any day chosen? Best, - Eric Koleda, AdWords API Team On Jul 12, 9:27 am, tozor t...@adlucent.com wrote: I get the following unexpected error when trying to run a zero impression keyword report: AxisFault faultCode: {http://schemas.xmlsoap.org/soap/envelope/} Server.userException faultSubcode: faultString: Including Zero Impression Keywords will make your report too large to run. To include this data, please narrow the scope of other report settings in this request (such as your View, Date Range, or Campaign/Ad Group selections). faultActor: faultNode: faultDetail: {https://adwords.google.com/api/adwords/v13}fault: ns1:code112/ns1:code ns1:messageIncluding Zero Impression Keywords will make your report too large to run. To include this data, please narrow the scope of other report settings in this request (such as your View, Date Range, or Campaign/Ad Group selections)./ns1:message The reason this error is unexpected to me is that the date range I am using is for a single day. Furthermore the account, while large, is nowhere near as large as many of the other accounts that our application manages. This account has about 400K keywords, but our application manages several accounts that are twice that size and we have never had an issue getting a single day zero impression report. The other strange issue is that I can change my report request to include all of the campaign ids in the account and the report runs correctly. So I am still able to get the report that I wanted (a zero impression report for the entire account) but I can't do it if I leave the DefinedReportJob.campaigns field empty. However leaving the field empty and setting it to all of the campaign ids in the account is functionally equivalent. Thanks in advance for any words of wisdom on this issue. Tim -- =~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~ Also find us on our blog and discussion group: http://adwordsapi.blogspot.com http://groups.google.com/group/adwords-api =~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~ You received this message because you are subscribed to the Google Groups AdWords API Forum group. To post to this group, send email to adwords-api@googlegroups.com To unsubscribe from this group, send email to adwords-api+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/adwords-api?hl=en