Re: [AFMUG] 13.3 Open Beta

2014-12-08 Thread Jonathan Mandziara via Af 
Pavel,

The Reply from Matt (Cambium) on the Cambium 13.3 Beta Forum to this question 
best sums it up:

http://community.cambiumnetworks.com/t5/PMP-Beta/13-3-beta-12-More-detail-on-CP-fragment-and-ACK-enhancements/m-p/37252#U37252


… “We are always evaluating LOTS of (REALLY COOL) stuff that may or not see the 
light of day (i.e. be included in an official release).



We are definitely looking at implementing 40 MHz channels, but are still 
investigating whether we can make it high enough quality to release.  
Unfortunately, sometimes the ideas that we try don't pan out, and cannot be 
released with quality...”

Best,

Cambium Jonathan

From: Af [mailto:af-boun...@afmug.com] On Behalf Of Pavel Lyuty via Af
Sent: Monday, December 08, 2014 3:06 PM
To: af@afmug.com
Subject: Re: [AFMUG] 13.3 Open Beta

in draft release notes notices about 40MHz 1024 FFT 2.5ms,

40 Mhz plan to support in PMP450 13.3 or only in PMP455 ?





2014-12-08 22:58 GMT+02:00 Jonathan Mandziara via Af 
mailto:af@afmug.com>>:
AF Community,

Thanks for providing your feedback on the new 13.3 features.

We would like to know how 13.3 has been working for you in your Open Beta 
network(s).

Please provide your candid feedback to us about 13.3 in your network by 
replying to this post.

Thanks!

Cambium Jonathan

From: Af [mailto:af-boun...@afmug.com<mailto:af-boun...@afmug.com>] On Behalf 
Of Jonathan Mandziara via Af
Sent: Wednesday, December 03, 2014 10:44 AM
To: af@afmug.com<mailto:af@afmug.com>
Subject: [AFMUG] 13.3 Open Beta

AF Community,

Please visit the Cambium Networks webpage to down load the Open Beta version of 
13.3 for PMP450 and PTP450 radios.

https://support.cambiumnetworks.com/files/pmp450/beta
https://support.cambiumnetworks.com/files/ptp450/beta

  *   PMP320 Co-location (5ms Frame support) (This will work on all bands, but 
intended for 3.5 and 3.65 at this time.)
  *   7MHz Channel Bandwidth for 3.5 and 3.65 radios
  *   Removal of the PTP450 Map for faster link speeds
  *   SNMPv3
  *   HTTPS
  *   Ability to turn off Telnet, FTP and TFTP
  *   Read-Only Accounts for Admin, Install, and Tech
  *   Sector SA
  *   Export of Sessions Status Page
  *   Config File export/Import for AP/BHM and SM/BHS
NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM 
synch sources.  Cambium is writing a paper on how to adjust the radios to best 
deal with other synch sources, although the radios will still work together 
without adjustment with some impact to throughput.
We look forward to you feedback on this release either in this forum or at:
http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta

Best,
Cambium Jonathan

Re: [AFMUG] 13.3 Open Beta

2014-12-08 Thread Pavel Lyuty via Af 
in draft release notes notices about 40MHz 1024 FFT 2.5ms,

40 Mhz plan to support in PMP450 13.3 or only in PMP455 ?





2014-12-08 22:58 GMT+02:00 Jonathan Mandziara via Af :

>  AF Community,
>
>
>
> Thanks for providing your feedback on the new 13.3 features.
>
>
>
> We would like to know how 13.3 has been working for you in your Open Beta
> network(s).
>
>
>
> Please provide your candid feedback to us about 13.3 in your network by
> replying to this post.
>
>
>
> Thanks!
>
>
>
> Cambium Jonathan
>
>
>
> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Jonathan
> Mandziara via Af
> *Sent:* Wednesday, December 03, 2014 10:44 AM
> *To:* af@afmug.com
> *Subject:* [AFMUG] 13.3 Open Beta
>
>
>
> AF Community,
>
>
>
> Please visit the Cambium Networks webpage to down load the Open Beta
> version of 13.3 for PMP450 and PTP450 radios.
>
>
>
> https://support.cambiumnetworks.com/files/pmp450/beta
>
> https://support.cambiumnetworks.com/files/ptp450/beta
>
>- PMP320 Co-location (5ms Frame support) (This will work on all bands,
>but intended for 3.5 and 3.65 at this time.)
>- 7MHz Channel Bandwidth for 3.5 and 3.65 radios
>- Removal of the PTP450 Map for faster link speeds
>- SNMPv3
>- HTTPS
>- Ability to turn off Telnet, FTP and TFTP
>- Read-Only Accounts for Admin, Install, and Tech
>- Sector SA
>- Export of Sessions Status Page
>- Config File export/Import for AP/BHM and SM/BHS
>
>  *NOTE:* PMP320 co-location works best when both the PMP450 and PMP320
> are on CMM synch sources.  Cambium is writing a paper on how to adjust the
> radios to best deal with other synch sources, although the radios will
> still work together without adjustment with some impact to throughput.
>
> We look forward to you feedback on this release either in this forum or at:
>
> http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta
>
>
>
> Best,
>
> C*a*mbium Jonathan
>
>
>

Re: [AFMUG] 13.3 Open Beta

2014-12-08 Thread Jonathan Mandziara via Af 
AF Community,

Thanks for providing your feedback on the new 13.3 features.

We would like to know how 13.3 has been working for you in your Open Beta 
network(s).

Please provide your candid feedback to us about 13.3 in your network by 
replying to this post.

Thanks!

Cambium Jonathan

From: Af [mailto:af-boun...@afmug.com] On Behalf Of Jonathan Mandziara via Af
Sent: Wednesday, December 03, 2014 10:44 AM
To: af@afmug.com
Subject: [AFMUG] 13.3 Open Beta

AF Community,

Please visit the Cambium Networks webpage to down load the Open Beta version of 
13.3 for PMP450 and PTP450 radios.

https://support.cambiumnetworks.com/files/pmp450/beta
https://support.cambiumnetworks.com/files/ptp450/beta

  *   PMP320 Co-location (5ms Frame support) (This will work on all bands, but 
intended for 3.5 and 3.65 at this time.)
  *   7MHz Channel Bandwidth for 3.5 and 3.65 radios
  *   Removal of the PTP450 Map for faster link speeds
  *   SNMPv3
  *   HTTPS
  *   Ability to turn off Telnet, FTP and TFTP
  *   Read-Only Accounts for Admin, Install, and Tech
  *   Sector SA
  *   Export of Sessions Status Page
  *   Config File export/Import for AP/BHM and SM/BHS
NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM 
synch sources.  Cambium is writing a paper on how to adjust the radios to best 
deal with other synch sources, although the radios will still work together 
without adjustment with some impact to throughput.
We look forward to you feedback on this release either in this forum or at:
http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta

Best,
Cambium Jonathan

Re: [AFMUG] 13.3 Open Beta

2014-12-04 Thread Shayne Lebrun via Af 
The APs can be synchronized for time/date/timezone; just have 'scheduled full 
SA' as an option.

-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt via Af
Sent: Wednesday, December 3, 2014 7:15 PM
To: af@afmug.com
Subject: Re: [AFMUG] 13.3 Open Beta

>The way Sector SA is being implemented won’t give the 
> best possible results in practice. Since it is not paying attention to 
> the sync pulses, but just coordinating running an AP spectrum scan 
> with the SMs you are still going to see a bunch of bogus energy from 
> co-located access points.  In order to do this in a way where you can 
> really see what the

My thought is to open 4 tabs in my web browser and run all the AP's in cluster 
at one time.  Is there an SNMP command to do this?  Would be nice to run a 
system wide SA every few months.  Could not open enough tabs to do this but 
would be easy with a perl script and SNMP.  Would be nice to be able to 
retrieve the results with SNMP as well.


> spectrum looks like, the AP should only perform SA during its 
> appointed receive windows and not during the TX windows of other co-located 
> equipment.
>
>
> Another side effect for those of us running fancy beam 
> forming antenna arrays is we can never use ‘Sector SA’ at all, since 
> it is

Where do you get 'beam forming antenna's for 450 gear?

> listening during the TX windows of other access points connected to 
> the beam former and getting high RF levels shoved into its RX side.
>

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Gino Villarini via Af 
How them working?



Gino A. Villarini
President
Aeronet Wireless Broadband Corp.
www.aeronetpr.com  
@aeronetpr






On 12/3/14, 8:50 PM, "Peter Kranz via Af"  wrote:

>>Where do you get 'beam forming antenna's for 450 gear?
>
>ET Industries..
>

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Peter Kranz via Af 
>Where do you get 'beam forming antenna's for 450 gear?

ET Industries..

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Matt via Af 
>The way Sector SA is being implemented won’t give the best
> possible results in practice. Since it is not paying attention to the sync
> pulses, but just coordinating running an AP spectrum scan with the SMs you
> are still going to see a bunch of bogus energy from co-located access
> points.  In order to do this in a way where you can really see what the

My thought is to open 4 tabs in my web browser and run all the AP's in
cluster at one time.  Is there an SNMP command to do this?  Would be
nice to run a system wide SA every few months.  Could not open enough
tabs to do this but would be easy with a perl script and SNMP.  Would
be nice to be able to retrieve the results with SNMP as well.


> spectrum looks like, the AP should only perform SA during its appointed
> receive windows and not during the TX windows of other co-located equipment.
>
>
> Another side effect for those of us running fancy beam
> forming antenna arrays is we can never use ‘Sector SA’ at all, since it is

Where do you get 'beam forming antenna's for 450 gear?

> listening during the TX windows of other access points connected to the beam
> former and getting high RF levels shoved into its RX side.
>

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Peter Kranz via Af 
And look at the in-service SA features now offered on the latest 
RocketM5AC-Lite and upcoming mimosa products.. They can perform AP SA’s while 
remaining in service by listening during spare RX cycles.. no need to take down 
the AP or worse an entire tower.. everything pays attention to sync and you 
keep in service.

 

From: Af [mailto:af-boun...@afmug.com] On Behalf Of George Skorup (Cyber 
Broadcasting) via Af
Sent: Wednesday, December 03, 2014 3:37 PM
To: af@afmug.com
Subject: Re: [AFMUG] 13.3 Open Beta

 

Ideally you'd run this on all same-band co-located sectors at the same time. 
But yeah, my thought was close to yours. We have some towers only a mile or two 
apart and the SMs will definitely pick them up. This is one reason why I 
mentioned AP mode background SA. Schedule an Rx slot for background SA and give 
me a 1 or 5 minute average of my current channel. This is pretty much what 
happens with LBT now anyway.

On 12/3/2014 5:25 PM, Peter Kranz via Af wrote:

Hi Jonathan,

The way Sector SA is being implemented won’t give the best 
possible results in practice. Since it is not paying attention to the sync 
pulses, but just coordinating running an AP spectrum scan with the SMs you are 
still going to see a bunch of bogus energy from co-located access points.  In 
order to do this in a way where you can really see what the spectrum looks 
like, the AP should only perform SA during its appointed receive windows and 
not during the TX windows of other co-located equipment.

 

Another side effect for those of us running fancy beam forming 
antenna arrays is we can never use ‘Sector SA’ at all, since it is listening 
during the TX windows of other access points connected to the beam former and 
getting high RF levels shoved into its RX side.

 

Peter Kranz
Founder/CEO - Unwired Ltd
 <http://www.unwiredltd.com/> www.UnwiredLtd.com
Desk: 510-868-1614 x100
Mobile: 510-207-
 <mailto:pkr...@unwiredltd.com> pkr...@unwiredltd.com

 

From: Af [mailto:af-boun...@afmug.com] On Behalf Of Jonathan Mandziara via Af
Sent: Wednesday, December 03, 2014 8:44 AM
To: af@afmug.com <mailto:af@afmug.com> 
Subject: [AFMUG] 13.3 Open Beta

 

AF Community,

 

Please visit the Cambium Networks webpage to down load the Open Beta version of 
13.3 for PMP450 and PTP450 radios.

 

https://support.cambiumnetworks.com/files/pmp450/beta 

https://support.cambiumnetworks.com/files/ptp450/beta 

*   PMP320 Co-location (5ms Frame support) (This will work on all bands, 
but intended for 3.5 and 3.65 at this time.)
*   7MHz Channel Bandwidth for 3.5 and 3.65 radios
*   Removal of the PTP450 Map for faster link speeds
*   SNMPv3
*   HTTPS
*   Ability to turn off Telnet, FTP and TFTP
*   Read-Only Accounts for Admin, Install, and Tech
*   Sector SA
*   Export of Sessions Status Page
*   Config File export/Import for AP/BHM and SM/BHS

NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM 
synch sources.  Cambium is writing a paper on how to adjust the radios to best 
deal with other synch sources, although the radios will still work together 
without adjustment with some impact to throughput.

We look forward to you feedback on this release either in this forum or at:

http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta 

 

Best,

Cambium Jonathan

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread George Skorup (Cyber Broadcasting) via Af 
Ideally you'd run this on all same-band co-located sectors at the same 
time. But yeah, my thought was close to yours. We have some towers only 
a mile or two apart and the SMs will definitely pick them up. This is 
one reason why I mentioned AP mode background SA. Schedule an Rx slot 
for background SA and give me a 1 or 5 minute average of my current 
channel. This is pretty much what happens with LBT now anyway.


On 12/3/2014 5:25 PM, Peter Kranz via Af wrote:


Hi Jonathan,

The way Sector SA is being implemented won’t give the best possible 
results in practice. Since it is not paying attention to the sync 
pulses, but just coordinating running an AP spectrum scan with the SMs 
you are still going to see a bunch of bogus energy from co-located 
access points.  In order to do this in a way where you can really see 
what the spectrum looks like, the AP should only perform SA during its 
appointed receive windows and not during the TX windows of other 
co-located equipment.


Another side effect for those of us running fancy beam forming antenna 
arrays is we can never use ‘Sector SA’ at all, since it is listening 
during the TX windows of other access points connected to the beam 
former and getting high RF levels shoved into its RX side.


*Peter Kranz
*Founder/CEO - Unwired Ltd
www.UnwiredLtd.com <http://www.unwiredltd.com/>
Desk: 510-868-1614 x100
Mobile: 510-207-
pkr...@unwiredltd.com <mailto:pkr...@unwiredltd.com>

*From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *Jonathan 
Mandziara via Af

*Sent:* Wednesday, December 03, 2014 8:44 AM
*To:* af@afmug.com
*Subject:* [AFMUG] 13.3 Open Beta

AF Community,

Please visit the Cambium Networks webpage to down load the Open Beta 
version of 13.3 for PMP450 and PTP450 radios.


https://support.cambiumnetworks.com/files/pmp450/beta

https://support.cambiumnetworks.com/files/ptp450/beta

  * PMP320 Co-location (5ms Frame support) (This will work on all
bands, but intended for 3.5 and 3.65 at this time.)
  * 7MHz Channel Bandwidth for 3.5 and 3.65 radios
  * Removal of the PTP450 Map for faster link speeds
  * SNMPv3
  * HTTPS
  * Ability to turn off Telnet, FTP and TFTP
  * Read-Only Accounts for Admin, Install, and Tech
  * Sector SA
  * Export of Sessions Status Page
  * Config File export/Import for AP/BHM and SM/BHS

*NOTE:* PMP320 co-location works best when both the PMP450 and PMP320 
are on CMM synch sources.  Cambium is writing a paper on how to adjust 
the radios to best deal with other synch sources, although the radios 
will still work together without adjustment with some impact to 
throughput.


We look forward to you feedback on this release either in this forum 
or at:


http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta

Best,

C*a*mbium Jonathan

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Peter Kranz via Af 
Hi Jonathan,

The way Sector SA is being implemented won’t give the best 
possible results in practice. Since it is not paying attention to the sync 
pulses, but just coordinating running an AP spectrum scan with the SMs you are 
still going to see a bunch of bogus energy from co-located access points.  In 
order to do this in a way where you can really see what the spectrum looks 
like, the AP should only perform SA during its appointed receive windows and 
not during the TX windows of other co-located equipment.

 

Another side effect for those of us running fancy beam forming 
antenna arrays is we can never use ‘Sector SA’ at all, since it is listening 
during the TX windows of other access points connected to the beam former and 
getting high RF levels shoved into its RX side.

 

Peter Kranz
Founder/CEO - Unwired Ltd
 <http://www.unwiredltd.com/> www.UnwiredLtd.com
Desk: 510-868-1614 x100
Mobile: 510-207-
 <mailto:pkr...@unwiredltd.com> pkr...@unwiredltd.com

 

From: Af [mailto:af-boun...@afmug.com] On Behalf Of Jonathan Mandziara via Af
Sent: Wednesday, December 03, 2014 8:44 AM
To: af@afmug.com
Subject: [AFMUG] 13.3 Open Beta

 

AF Community,

 

Please visit the Cambium Networks webpage to down load the Open Beta version of 
13.3 for PMP450 and PTP450 radios.

 

https://support.cambiumnetworks.com/files/pmp450/beta 

https://support.cambiumnetworks.com/files/ptp450/beta 

*   PMP320 Co-location (5ms Frame support) (This will work on all bands, 
but intended for 3.5 and 3.65 at this time.)
*   7MHz Channel Bandwidth for 3.5 and 3.65 radios
*   Removal of the PTP450 Map for faster link speeds
*   SNMPv3
*   HTTPS
*   Ability to turn off Telnet, FTP and TFTP
*   Read-Only Accounts for Admin, Install, and Tech
*   Sector SA
*   Export of Sessions Status Page
*   Config File export/Import for AP/BHM and SM/BHS

NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM 
synch sources.  Cambium is writing a paper on how to adjust the radios to best 
deal with other synch sources, although the radios will still work together 
without adjustment with some impact to throughput.

We look forward to you feedback on this release either in this forum or at:

http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta 

 

Best,

Cambium Jonathan

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Rajesh Vijayakumar via Af 
Mark,
We have tested with CMM only, but it should work with other "sync over
power" solutions. Please let me know if you see any issues.

Rajesh Vijayakumar
Cambium Networks

On Wed, Dec 3, 2014 at 12:57 PM, Mark Radabaugh via Af  wrote:

> I’m going to try this out as soon as I can get a 450AP 3.65 on the site.
>
> Question - the comment about CMM timing source.   Was this ‘it works best
> if all devices have the same timing source’ or is there something specific
> to the CMM itself?Is ask because we usually use LMG CTM’s at these
> sites.   The timing all comes from the same timing source, but it’s not
> your CMM.
>
> Mark
>
>
> On Dec 3, 2014, at 1:13 PM, Rajesh Vijayakumar via Af 
> wrote:
>
> We are looking specifically for beta coverage on PMP320 co-location. If
> anyone is trying this or have specific questions, please let us know. You
> can also contact me off-list at rajesh.vijayaku...@cambiumnetworks.com.
>
> Rajesh Vijayakumar
> Cambium Networks
>
> On Wed, Dec 3, 2014 at 10:44 AM, Jonathan Mandziara via Af 
> wrote:
>
>>   AF Community,
>>
>>
>>
>> Please visit the Cambium Networks webpage to down load the Open Beta
>> version of 13.3 for PMP450 and PTP450 radios.
>>
>>
>>
>> https://support.cambiumnetworks.com/files/pmp450/beta
>>
>> https://support.cambiumnetworks.com/files/ptp450/beta
>>
>>- PMP320 Co-location (5ms Frame support) (This will work on all
>>bands, but intended for 3.5 and 3.65 at this time.)
>>- 7MHz Channel Bandwidth for 3.5 and 3.65 radios
>>- Removal of the PTP450 Map for faster link speeds
>>- SNMPv3
>>- HTTPS
>>- Ability to turn off Telnet, FTP and TFTP
>>- Read-Only Accounts for Admin, Install, and Tech
>>- Sector SA
>>- Export of Sessions Status Page
>>- Config File export/Import for AP/BHM and SM/BHS
>>
>> *NOTE:* PMP320 co-location works best when both the PMP450 and PMP320
>> are on CMM synch sources.  Cambium is writing a paper on how to adjust the
>> radios to best deal with other synch sources, although the radios will
>> still work together without adjustment with some impact to throughput.
>>
>> We look forward to you feedback on this release either in this forum or
>> at:
>>
>> http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta
>>
>>
>>
>> Best,
>>
>> C*a*mbium Jonathan
>>
>>
>>
>
>
>

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Bill Prince via Af 
All the different timing products, Packetflux, CTM, CMM have compatible 
timing.  There are differences, but they differences are tiny.  However, 
I would sync all co-located devices to the fewest number of devices you 
can deal with.  We are not 100% this way, and we've gotten away with it 
for the most part.  BUT, timing problems are a royal PITA to troubleshoot.


--
bp


On 12/3/2014 10:57 AM, Mark Radabaugh via Af wrote:

I’m going to try this out as soon as I can get a 450AP 3.65 on the site.

Question - the comment about CMM timing source. Was this ‘it works 
best if all devices have the same timing source’ or is there something 
specific to the CMM itself?Is ask because we usually use LMG CTM’s 
at these sites.   The timing all comes from the same timing source, 
but it’s not your CMM.


Mark


On Dec 3, 2014, at 1:13 PM, Rajesh Vijayakumar via Af > wrote:


We are looking specifically for beta coverage on PMP320 co-location. 
If anyone is trying this or have specific questions, please let us 
know. You can also contact me off-list at 
rajesh.vijayaku...@cambiumnetworks.com 
.


Rajesh Vijayakumar
Cambium Networks

On Wed, Dec 3, 2014 at 10:44 AM, Jonathan Mandziara via Af 
mailto:af@afmug.com>> wrote:


AF Community,

Please visit the Cambium Networks webpage to down load the Open
Beta version of 13.3 for PMP450 and PTP450 radios.

https://support.cambiumnetworks.com/files/pmp450/beta

https://support.cambiumnetworks.com/files/ptp450/beta

  * PMP320 Co-location (5ms Frame support) (This will work on all
bands, but intended for 3.5 and 3.65 at this time.)
  * 7MHz Channel Bandwidth for 3.5 and 3.65 radios
  * Removal of the PTP450 Map for faster link speeds
  * SNMPv3
  * HTTPS
  * Ability to turn off Telnet, FTP and TFTP
  * Read-Only Accounts for Admin, Install, and Tech
  * Sector SA
  * Export of Sessions Status Page
  * Config File export/Import for AP/BHM and SM/BHS

*NOTE:* PMP320 co-location works best when both the PMP450 and
PMP320 are on CMM synch sources.  Cambium is writing a paper on
how to adjust the radios to best deal with other synch sources,
although the radios will still work together without adjustment
with some impact to throughput.

We look forward to you feedback on this release either in this
forum or at:

http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta


Best,

C*a*mbium Jonathan

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Bill Prince via Af 
It would be far, far simpler if you could just plug in frame timing 
parameters from any co-located APs.


(hint hint)

--
bp


On 12/3/2014 10:20 AM, Matt via Af wrote:

I still wish there was a max range setting on the PTP450 units.  We
seem to run into issues when PTP230 units boot up without there range
setting determined yet.  They clash with others that are linked
already due to data slots misaligned is what I figure.

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Bill Prince via Af 

Fortunately, we never bought the WiMax Kool-Aid.

--
bp


On 12/3/2014 10:13 AM, Rajesh Vijayakumar via Af wrote:
We are looking specifically for beta coverage on PMP320 co-location. 
If anyone is trying this or have specific questions, please let us 
know. You can also contact me off-list at 
rajesh.vijayaku...@cambiumnetworks.com 
.


Rajesh Vijayakumar
Cambium Networks

On Wed, Dec 3, 2014 at 10:44 AM, Jonathan Mandziara via Af 
mailto:af@afmug.com>> wrote:


AF Community,

Please visit the Cambium Networks webpage to down load the Open
Beta version of 13.3 for PMP450 and PTP450 radios.

https://support.cambiumnetworks.com/files/pmp450/beta

https://support.cambiumnetworks.com/files/ptp450/beta

  * PMP320 Co-location (5ms Frame support) (This will work on all
bands, but intended for 3.5 and 3.65 at this time.)
  * 7MHz Channel Bandwidth for 3.5 and 3.65 radios
  * Removal of the PTP450 Map for faster link speeds
  * SNMPv3
  * HTTPS
  * Ability to turn off Telnet, FTP and TFTP
  * Read-Only Accounts for Admin, Install, and Tech
  * Sector SA
  * Export of Sessions Status Page
  * Config File export/Import for AP/BHM and SM/BHS

*NOTE:* PMP320 co-location works best when both the PMP450 and
PMP320 are on CMM synch sources.  Cambium is writing a paper on
how to adjust the radios to best deal with other synch sources,
although the radios will still work together without adjustment
with some impact to throughput.

We look forward to you feedback on this release either in this
forum or at:

http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta

Best,

C*a*mbium Jonathan

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Brian Sullivan via Af 
Can we use the Sessions Status export file to import into the Capacity 
Planner?



On 12/3/2014 10:44 AM, Jonathan Mandziara via Af wrote:
# PMP320 Co-location (5ms Frame support) (This will work on all bands, 
but intended for 3.5 and 3.65 at this time.)

# 7MHz Channel Bandwidth for 3.5 and 3.65 radios
# Removal of the PTP450 Map for faster link speeds
# SNMPv3
# HTTPS
# Ability to turn off Telnet, FTP and TFTP
# Read-Only Accounts for Admin, Install, and Tech
# Sector SA
# Export of Sessions Status Page
# Config File export/Import for AP/BHM and SM/BHS

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Bill Prince via Af 
I wouldn't want you to think we're looking a gift horse in the mouth or 
anything


--
bp


On 12/3/2014 9:44 AM, Aaron Schneider via Af wrote:


Better way late than never, right?  :)

*From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *Josh Luthman via Af
*Sent:* Wednesday, December 03, 2014 11:43 AM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] 13.3 Open Beta

Config file!  Not already!!!

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Dec 3, 2014 12:41 PM, "Aaron Schneider via Af" <mailto:af@afmug.com>> wrote:


It is definitely being considered and your voices are being heard.  I 
just can’t comment on it just yet. :)


*From:*Af [mailto:af-boun...@afmug.com <mailto:af-boun...@afmug.com>] 
*On Behalf Of *George Skorup (Cyber Broadcasting) via Af

*Sent:* Wednesday, December 03, 2014 11:39 AM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] 13.3 Open Beta

I really hope you guys will consider testing and releasing this for 
FSK. We still use a lot of it. The config file will definitely be 
helpful. And there's still no resolution for 2.4 FSK None frequency issue.


On 12/3/2014 10:44 AM, Jonathan Mandziara via Af wrote:

AF Community,

Please visit the Cambium Networks webpage to down load the Open
Beta version of 13.3 for PMP450 and PTP450 radios.

https://support.cambiumnetworks.com/files/pmp450/beta

https://support.cambiumnetworks.com/files/ptp450/beta

  * PMP320 Co-location (5ms Frame support) (This will work on all
bands, but intended for 3.5 and 3.65 at this time.)
  * 7MHz Channel Bandwidth for 3.5 and 3.65 radios
  * Removal of the PTP450 Map for faster link speeds
  * SNMPv3
  * HTTPS
  * Ability to turn off Telnet, FTP and TFTP
  * Read-Only Accounts for Admin, Install, and Tech
  * Sector SA
  * Export of Sessions Status Page
  * Config File export/Import for AP/BHM and SM/BHS

*NOTE:* PMP320 co-location works best when both the PMP450 and
PMP320 are on CMM synch sources.  Cambium is writing a paper on
how to adjust the radios to best deal with other synch sources,
although the radios will still work together without adjustment
with some impact to throughput.

We look forward to you feedback on this release either in this
forum or at:

http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta

Best,

C*a*mbium Jonathan

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Mark Radabaugh via Af 
I’m going to try this out as soon as I can get a 450AP 3.65 on the site.

Question - the comment about CMM timing source.   Was this ‘it works best if 
all devices have the same timing source’ or is there something specific to the 
CMM itself?Is ask because we usually use LMG CTM’s at these sites.   The 
timing all comes from the same timing source, but it’s not your CMM.

Mark


> On Dec 3, 2014, at 1:13 PM, Rajesh Vijayakumar via Af  wrote:
> 
> We are looking specifically for beta coverage on PMP320 co-location. If 
> anyone is trying this or have specific questions, please let us know. You can 
> also contact me off-list at rajesh.vijayaku...@cambiumnetworks.com 
> .
> 
> Rajesh Vijayakumar
> Cambium Networks
> 
> On Wed, Dec 3, 2014 at 10:44 AM, Jonathan Mandziara via Af  > wrote:
> AF Community,
> 
>  
> 
> Please visit the Cambium Networks webpage to down load the Open Beta version 
> of 13.3 for PMP450 and PTP450 radios.
> 
>  
> 
> https://support.cambiumnetworks.com/files/pmp450/beta 
> 
> https://support.cambiumnetworks.com/files/ptp450/beta 
> 
> PMP320 Co-location (5ms Frame support) (This will work on all bands, but 
> intended for 3.5 and 3.65 at this time.)
> 7MHz Channel Bandwidth for 3.5 and 3.65 radios
> Removal of the PTP450 Map for faster link speeds
> SNMPv3
> HTTPS
> Ability to turn off Telnet, FTP and TFTP
> Read-Only Accounts for Admin, Install, and Tech
> Sector SA
> Export of Sessions Status Page
> Config File export/Import for AP/BHM and SM/BHS
> NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on 
> CMM synch sources.  Cambium is writing a paper on how to adjust the radios to 
> best deal with other synch sources, although the radios will still work 
> together without adjustment with some impact to throughput.
> 
> We look forward to you feedback on this release either in this forum or at:
> 
> http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta 
> 
>  
> 
> Best,
> 
> Cambium Jonathan
> 
>  
> 
>

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Matt via Af 
> Sorry, I did not realize that there were other questions in the thread.
>
> Q) Will this work with Purwave wimax?
> A) All of the 5ms frame testing and verification work that we have been 
> testing against is the 3.5 and 3.65 PMP320 units.  Can you give it a try with 
> Purwave Wimax and let us know?

I do not have any purwave but there is some of it around here.  Will
see if we get less interference going 5ms frame.  Think I might wait a
bit to let others go first though.

> Q) How much t-put will we gain?
> I do not understand the context of this question.  How much more T-put is 
> gained going from a 2.5ms frame to a 5ms frame?

In release notes I think it states that 5ms frame should have less
overhead so more throughput along with double latency.

> Q) How much faster?
> A) 3.2 Mbps (in each BW)- Be sure to upgrade the far side of the link first

I still wish there was a max range setting on the PTP450 units.  We
seem to run into issues when PTP230 units boot up without there range
setting determined yet.  They clash with others that are linked
already due to data slots misaligned is what I figure.

> S) This is really cool reading release notes.  Wish we had it on FSK as well.
> A) We hear you.  We can't comment on FSK support at this time.

I really like this SA feature



>
> I'd like to know as well.
>
> --danp
>
>
>
> On 12/03/2014 10:26 AM, Matt via Af wrote:
>> Will this work with Purwave wimax?
>

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Rajesh Vijayakumar via Af 
We are looking specifically for beta coverage on PMP320 co-location. If
anyone is trying this or have specific questions, please let us know. You
can also contact me off-list at rajesh.vijayaku...@cambiumnetworks.com.

Rajesh Vijayakumar
Cambium Networks

On Wed, Dec 3, 2014 at 10:44 AM, Jonathan Mandziara via Af 
wrote:

>AF Community,
>
>
>
> Please visit the Cambium Networks webpage to down load the Open Beta
> version of 13.3 for PMP450 and PTP450 radios.
>
>
>
> https://support.cambiumnetworks.com/files/pmp450/beta
>
> https://support.cambiumnetworks.com/files/ptp450/beta
>
>- PMP320 Co-location (5ms Frame support) (This will work on all bands,
>but intended for 3.5 and 3.65 at this time.)
>- 7MHz Channel Bandwidth for 3.5 and 3.65 radios
>- Removal of the PTP450 Map for faster link speeds
>- SNMPv3
>- HTTPS
>- Ability to turn off Telnet, FTP and TFTP
>- Read-Only Accounts for Admin, Install, and Tech
>- Sector SA
>- Export of Sessions Status Page
>- Config File export/Import for AP/BHM and SM/BHS
>
>  *NOTE:* PMP320 co-location works best when both the PMP450 and PMP320
> are on CMM synch sources.  Cambium is writing a paper on how to adjust the
> radios to best deal with other synch sources, although the radios will
> still work together without adjustment with some impact to throughput.
>
> We look forward to you feedback on this release either in this forum or at:
>
> http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta
>
>
>
> Best,
>
> C*a*mbium Jonathan
>
>
>

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Bill Prince via Af 

+1 with major enthusiasm!

I can't even remember when we first asked for the config file 
import/export.  It's got to be close to 6 years now.  Man oh man. We're 
finally almost there!


and SNMPv3 too.  Wowser.

--
bp


On 12/3/2014 9:38 AM, George Skorup (Cyber Broadcasting) via Af wrote:
I really hope you guys will consider testing and releasing this for 
FSK. We still use a lot of it. The config file will definitely be 
helpful. And there's still no resolution for 2.4 FSK None frequency issue.


On 12/3/2014 10:44 AM, Jonathan Mandziara via Af wrote:


AF Community,

Please visit the Cambium Networks webpage to down load the Open Beta 
version of 13.3 for PMP450 and PTP450 radios.


https://support.cambiumnetworks.com/files/pmp450/beta

https://support.cambiumnetworks.com/files/ptp450/beta

  * PMP320 Co-location (5ms Frame support) (This will work on all
bands, but intended for 3.5 and 3.65 at this time.)
  * 7MHz Channel Bandwidth for 3.5 and 3.65 radios
  * Removal of the PTP450 Map for faster link speeds
  * SNMPv3
  * HTTPS
  * Ability to turn off Telnet, FTP and TFTP
  * Read-Only Accounts for Admin, Install, and Tech
  * Sector SA
  * Export of Sessions Status Page
  * Config File export/Import for AP/BHM and SM/BHS

*NOTE:* PMP320 co-location works best when both the PMP450 and PMP320 
are on CMM synch sources.  Cambium is writing a paper on how to 
adjust the radios to best deal with other synch sources, although the 
radios will still work together without adjustment with some impact 
to throughput.


We look forward to you feedback on this release either in this forum 
or at:


http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta

Best,

C*a*mbium Jonathan

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Jonathan Mandziara via Af 
Matt,

Sorry, I did not realize that there were other questions in the thread.

Q) Will this work with Purwave wimax?
A) All of the 5ms frame testing and verification work that we have been testing 
against is the 3.5 and 3.65 PMP320 units.  Can you give it a try with Purwave 
Wimax and let us know?

Q) How much t-put will we gain?  
I do not understand the context of this question.  How much more T-put is 
gained going from a 2.5ms frame to a 5ms frame? 

Q) How much faster?
A) 3.2 Mbps (in each BW)- Be sure to upgrade the far side of the link first

S) This is really cool reading release notes.  Wish we had it on FSK as well.
A) We hear you.  We can't comment on FSK support at this time.

-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of tcidan via Af
Sent: Wednesday, December 03, 2014 11:43 AM
To: af@afmug.com
Subject: Re: [AFMUG] 13.3 Open Beta

I'd like to know as well.

--danp



On 12/03/2014 10:26 AM, Matt via Af wrote:
> Will this work with Purwave wimax?

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Aaron Schneider via Af 
Better way late than never, right?  :)



From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Luthman via Af
Sent: Wednesday, December 03, 2014 11:43 AM
To: af@afmug.com
Subject: Re: [AFMUG] 13.3 Open Beta


Config file!  Not already!!!

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Dec 3, 2014 12:41 PM, "Aaron Schneider via Af" 
mailto:af@afmug.com>> wrote:
It is definitely being considered and your voices are being heard.  I just 
can’t comment on it just yet. :)

From: Af [mailto:af-boun...@afmug.com<mailto:af-boun...@afmug.com>] On Behalf 
Of George Skorup (Cyber Broadcasting) via Af
Sent: Wednesday, December 03, 2014 11:39 AM
To: af@afmug.com<mailto:af@afmug.com>
Subject: Re: [AFMUG] 13.3 Open Beta

I really hope you guys will consider testing and releasing this for FSK. We 
still use a lot of it. The config file will definitely be helpful. And there's 
still no resolution for 2.4 FSK None frequency issue.

On 12/3/2014 10:44 AM, Jonathan Mandziara via Af wrote:
AF Community,

Please visit the Cambium Networks webpage to down load the Open Beta version of 
13.3 for PMP450 and PTP450 radios.

https://support.cambiumnetworks.com/files/pmp450/beta
https://support.cambiumnetworks.com/files/ptp450/beta

  *   PMP320 Co-location (5ms Frame support) (This will work on all bands, but 
intended for 3.5 and 3.65 at this time.)
  *   7MHz Channel Bandwidth for 3.5 and 3.65 radios
  *   Removal of the PTP450 Map for faster link speeds
  *   SNMPv3
  *   HTTPS
  *   Ability to turn off Telnet, FTP and TFTP
  *   Read-Only Accounts for Admin, Install, and Tech
  *   Sector SA
  *   Export of Sessions Status Page
  *   Config File export/Import for AP/BHM and SM/BHS
NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM 
synch sources.  Cambium is writing a paper on how to adjust the radios to best 
deal with other synch sources, although the radios will still work together 
without adjustment with some impact to throughput.
We look forward to you feedback on this release either in this forum or at:
http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta

Best,
Cambium Jonathan

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread George Skorup (Cyber Broadcasting) via Af 

That is freakin awesome! Now where's my AP background spectrum analyzer? :)

On 12/3/2014 11:40 AM, Aaron Schneider via Af wrote:


They are all told to run it simultaneously and while the SMs are doing 
it, the AP shuts itself up and runs a scan during that time.


*From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *Gino Villarini 
via Af

*Sent:* Wednesday, December 03, 2014 11:37 AM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] 13.3 Open Beta

Woaw! Nice�. Is the Sector SA runs on the SMS at the same time or 1 by 1?

Gino A. Villarini

President

Aeronet Wireless Broadband Corp.

www.aeronetpr.com <http://www.aeronetpr.com>

@aeronetpr

*From: *"af@afmug.com <mailto:af@afmug.com>" <mailto:af@afmug.com>>
*Reply-To: *"af@afmug.com <mailto:af@afmug.com>" <mailto:af@afmug.com>>

*Date: *Wednesday, December 3, 2014 at 1:24 PM
*To: *"af@afmug.com <mailto:af@afmug.com>" <mailto:af@afmug.com>>

*Subject: *Re: [AFMUG] 13.3 Open Beta

Gino,

Great questions!

Sector SA is a feature that runs a SA on the AP and all the SMs 
registered to it at the same time to get a true picture of the RF 
environment the AP and the SMs are seeing without the influence of the 
APs energy.


The removal of the MAP in the PTP450 will give around an increase of 
 3.2 Mbps on each Channel Bandwidth.


Best,

Cambium Jonathan

*From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *Gino Villarini 
via Af

*Sent:* Wednesday, December 03, 2014 11:20 AM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] 13.3 Open Beta

What is Sector SA? And removal of PT450 MAP?

Gino A. Villarini

President

Aeronet Wireless Broadband Corp.

www.aeronetpr.com <http://www.aeronetpr.com>

@aeronetpr

*From: *"af@afmug.com <mailto:af@afmug.com>" <mailto:af@afmug.com>>
*Reply-To: *"af@afmug.com <mailto:af@afmug.com>" <mailto:af@afmug.com>>

*Date: *Wednesday, December 3, 2014 at 12:44 PM
*To: *"af@afmug.com <mailto:af@afmug.com>" <mailto:af@afmug.com>>

*Subject: *[AFMUG] 13.3 Open Beta

AF Community,

Please visit the Cambium Networks webpage to down load the Open Beta 
version of 13.3 for PMP450 and PTP450 radios.


https://support.cambiumnetworks.com/files/pmp450/beta

https://support.cambiumnetworks.com/files/ptp450/beta

?PMP320 Co-location (5ms Frame support) (This will work on all bands, 
but intended for 3.5 and 3.65 at this time.)


?7MHz Channel Bandwidth for 3.5 and 3.65 radios

?Removal of the PTP450 Map for faster link speeds

?SNMPv3

?HTTPS

?Ability to turn off Telnet, FTP and TFTP

?Read-Only Accounts for Admin, Install, and Tech

?Sector SA

?Export of Sessions Status Page

?Config File export/Import for AP/BHM and SM/BHS

*NOTE:* PMP320 co-location works best when both the PMP450 and PMP320 
are on CMM synch sources.  Cambium is writing a paper on how to adjust 
the radios to best deal with other synch sources, although the radios 
will still work together without adjustment with some impact to 
throughput.


We look forward to you feedback on this release either in this forum 
or at:


http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta

Best,

C*a*mbium Jonathan

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Josh Luthman via Af 
Config file!  Not already!!!

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Dec 3, 2014 12:41 PM, "Aaron Schneider via Af"  wrote:

>  It is definitely being considered and your voices are being heard.  I
> just can’t comment on it just yet. :)
>
>
>
> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *George Skorup
> (Cyber Broadcasting) via Af
> *Sent:* Wednesday, December 03, 2014 11:39 AM
> *To:* af@afmug.com
> *Subject:* Re: [AFMUG] 13.3 Open Beta
>
>
>
> I really hope you guys will consider testing and releasing this for FSK.
> We still use a lot of it. The config file will definitely be helpful. And
> there's still no resolution for 2.4 FSK None frequency issue.
>
> On 12/3/2014 10:44 AM, Jonathan Mandziara via Af wrote:
>
>   AF Community,
>
>
>
> Please visit the Cambium Networks webpage to down load the Open Beta
> version of 13.3 for PMP450 and PTP450 radios.
>
>
>
> https://support.cambiumnetworks.com/files/pmp450/beta
>
> https://support.cambiumnetworks.com/files/ptp450/beta
>
>- PMP320 Co-location (5ms Frame support) (This will work on all bands,
>but intended for 3.5 and 3.65 at this time.)
>- 7MHz Channel Bandwidth for 3.5 and 3.65 radios
>- Removal of the PTP450 Map for faster link speeds
>- SNMPv3
>- HTTPS
>- Ability to turn off Telnet, FTP and TFTP
>- Read-Only Accounts for Admin, Install, and Tech
>- Sector SA
>- Export of Sessions Status Page
>- Config File export/Import for AP/BHM and SM/BHS
>
>  *NOTE:* PMP320 co-location works best when both the PMP450 and PMP320
> are on CMM synch sources.  Cambium is writing a paper on how to adjust the
> radios to best deal with other synch sources, although the radios will
> still work together without adjustment with some impact to throughput.
>
> We look forward to you feedback on this release either in this forum or at:
>
> http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta
>
>
>
> Best,
>
> C*a*mbium Jonathan
>
>
>
>
>

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread tcidan via Af 

I'd like to know as well.

--danp



On 12/03/2014 10:26 AM, Matt via Af wrote:

Will this work with Purwave wimax?

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Aaron Schneider via Af 
It is definitely being considered and your voices are being heard.  I just 
can’t comment on it just yet. :)

From: Af [mailto:af-boun...@afmug.com] On Behalf Of George Skorup (Cyber 
Broadcasting) via Af
Sent: Wednesday, December 03, 2014 11:39 AM
To: af@afmug.com
Subject: Re: [AFMUG] 13.3 Open Beta

I really hope you guys will consider testing and releasing this for FSK. We 
still use a lot of it. The config file will definitely be helpful. And there's 
still no resolution for 2.4 FSK None frequency issue.

On 12/3/2014 10:44 AM, Jonathan Mandziara via Af wrote:
AF Community,

Please visit the Cambium Networks webpage to down load the Open Beta version of 
13.3 for PMP450 and PTP450 radios.

https://support.cambiumnetworks.com/files/pmp450/beta
https://support.cambiumnetworks.com/files/ptp450/beta

  *   PMP320 Co-location (5ms Frame support) (This will work on all bands, but 
intended for 3.5 and 3.65 at this time.)
  *   7MHz Channel Bandwidth for 3.5 and 3.65 radios
  *   Removal of the PTP450 Map for faster link speeds
  *   SNMPv3
  *   HTTPS
  *   Ability to turn off Telnet, FTP and TFTP
  *   Read-Only Accounts for Admin, Install, and Tech
  *   Sector SA
  *   Export of Sessions Status Page
  *   Config File export/Import for AP/BHM and SM/BHS
NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM 
synch sources.  Cambium is writing a paper on how to adjust the radios to best 
deal with other synch sources, although the radios will still work together 
without adjustment with some impact to throughput.
We look forward to you feedback on this release either in this forum or at:
http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta

Best,
Cambium Jonathan

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Aaron Schneider via Af 
They are all told to run it simultaneously and while the SMs are doing it, the 
AP shuts itself up and runs a scan during that time.



From: Af [mailto:af-boun...@afmug.com] On Behalf Of Gino Villarini via Af
Sent: Wednesday, December 03, 2014 11:37 AM
To: af@afmug.com
Subject: Re: [AFMUG] 13.3 Open Beta

Woaw! Nice Is the Sector SA runs on the SMS at the same time or 1 by 1?



Gino A. Villarini
President
Aeronet Wireless Broadband Corp.
www.aeronetpr.com<http://www.aeronetpr.com>
@aeronetpr



From: "af@afmug.com<mailto:af@afmug.com>" mailto:af@afmug.com>>
Reply-To: "af@afmug.com<mailto:af@afmug.com>" 
mailto:af@afmug.com>>
Date: Wednesday, December 3, 2014 at 1:24 PM
To: "af@afmug.com<mailto:af@afmug.com>" mailto:af@afmug.com>>
Subject: Re: [AFMUG] 13.3 Open Beta

Gino,

Great questions!

Sector SA is a feature that runs a SA on the AP and all the SMs registered to 
it at the same time to get a true picture of the RF environment the AP and the 
SMs are seeing without the influence of the APs energy.

The removal of the MAP in the PTP450 will give around an increase of  3.2 Mbps 
on each Channel Bandwidth.

Best,

Cambium Jonathan

From: Af [mailto:af-boun...@afmug.com] On Behalf Of Gino Villarini via Af
Sent: Wednesday, December 03, 2014 11:20 AM
To: af@afmug.com<mailto:af@afmug.com>
Subject: Re: [AFMUG] 13.3 Open Beta

What is Sector SA? And removal of PT450 MAP?



Gino A. Villarini
President
Aeronet Wireless Broadband Corp.
www.aeronetpr.com<http://www.aeronetpr.com>
@aeronetpr



From: "af@afmug.com<mailto:af@afmug.com>" mailto:af@afmug.com>>
Reply-To: "af@afmug.com<mailto:af@afmug.com>" 
mailto:af@afmug.com>>
Date: Wednesday, December 3, 2014 at 12:44 PM
To: "af@afmug.com<mailto:af@afmug.com>" mailto:af@afmug.com>>
Subject: [AFMUG] 13.3 Open Beta

AF Community,

Please visit the Cambium Networks webpage to down load the Open Beta version of 
13.3 for PMP450 and PTP450 radios.

https://support.cambiumnetworks.com/files/pmp450/beta
https://support.cambiumnetworks.com/files/ptp450/beta
?PMP320 Co-location (5ms Frame support) (This will work on all bands, 
but intended for 3.5 and 3.65 at this time.)
?7MHz Channel Bandwidth for 3.5 and 3.65 radios
?Removal of the PTP450 Map for faster link speeds
?SNMPv3
?HTTPS
?Ability to turn off Telnet, FTP and TFTP
?Read-Only Accounts for Admin, Install, and Tech
?Sector SA
?Export of Sessions Status Page
?Config File export/Import for AP/BHM and SM/BHS
NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM 
synch sources.  Cambium is writing a paper on how to adjust the radios to best 
deal with other synch sources, although the radios will still work together 
without adjustment with some impact to throughput.
We look forward to you feedback on this release either in this forum or at:
http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta

Best,
Cambium Jonathan

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Jonathan Mandziara via Af 
Gino,

The SMs will run at around the "same" time and the AP will run a bit longer to 
ensure that all of the SMs have time to finish their scans.

Best,

Jonathan

From: Af [mailto:af-boun...@afmug.com] On Behalf Of Gino Villarini via Af
Sent: Wednesday, December 03, 2014 11:37 AM
To: af@afmug.com
Subject: Re: [AFMUG] 13.3 Open Beta

Woaw! Nice Is the Sector SA runs on the SMS at the same time or 1 by 1?



Gino A. Villarini
President
Aeronet Wireless Broadband Corp.
www.aeronetpr.com<http://www.aeronetpr.com>
@aeronetpr



From: "af@afmug.com<mailto:af@afmug.com>" mailto:af@afmug.com>>
Reply-To: "af@afmug.com<mailto:af@afmug.com>" 
mailto:af@afmug.com>>
Date: Wednesday, December 3, 2014 at 1:24 PM
To: "af@afmug.com<mailto:af@afmug.com>" mailto:af@afmug.com>>
Subject: Re: [AFMUG] 13.3 Open Beta

Gino,

Great questions!

Sector SA is a feature that runs a SA on the AP and all the SMs registered to 
it at the same time to get a true picture of the RF environment the AP and the 
SMs are seeing without the influence of the APs energy.

The removal of the MAP in the PTP450 will give around an increase of  3.2 Mbps 
on each Channel Bandwidth.

Best,

Cambium Jonathan

From: Af [mailto:af-boun...@afmug.com] On Behalf Of Gino Villarini via Af
Sent: Wednesday, December 03, 2014 11:20 AM
To: af@afmug.com<mailto:af@afmug.com>
Subject: Re: [AFMUG] 13.3 Open Beta

What is Sector SA? And removal of PT450 MAP?



Gino A. Villarini
President
Aeronet Wireless Broadband Corp.
www.aeronetpr.com<http://www.aeronetpr.com>
@aeronetpr



From: "af@afmug.com<mailto:af@afmug.com>" mailto:af@afmug.com>>
Reply-To: "af@afmug.com<mailto:af@afmug.com>" 
mailto:af@afmug.com>>
Date: Wednesday, December 3, 2014 at 12:44 PM
To: "af@afmug.com<mailto:af@afmug.com>" mailto:af@afmug.com>>
Subject: [AFMUG] 13.3 Open Beta

AF Community,

Please visit the Cambium Networks webpage to down load the Open Beta version of 
13.3 for PMP450 and PTP450 radios.

https://support.cambiumnetworks.com/files/pmp450/beta
https://support.cambiumnetworks.com/files/ptp450/beta
? PMP320 Co-location (5ms Frame support) (This will work on all bands, 
but intended for 3.5 and 3.65 at this time.)
? 7MHz Channel Bandwidth for 3.5 and 3.65 radios
? Removal of the PTP450 Map for faster link speeds
? SNMPv3
? HTTPS
? Ability to turn off Telnet, FTP and TFTP
? Read-Only Accounts for Admin, Install, and Tech
? Sector SA
? Export of Sessions Status Page
? Config File export/Import for AP/BHM and SM/BHS
NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM 
synch sources.  Cambium is writing a paper on how to adjust the radios to best 
deal with other synch sources, although the radios will still work together 
without adjustment with some impact to throughput.
We look forward to you feedback on this release either in this forum or at:
http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta

Best,
Cambium Jonathan

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread George Skorup (Cyber Broadcasting) via Af 
I really hope you guys will consider testing and releasing this for FSK. 
We still use a lot of it. The config file will definitely be helpful. 
And there's still no resolution for 2.4 FSK None frequency issue.


On 12/3/2014 10:44 AM, Jonathan Mandziara via Af wrote:


AF Community,

Please visit the Cambium Networks webpage to down load the Open Beta 
version of 13.3 for PMP450 and PTP450 radios.


https://support.cambiumnetworks.com/files/pmp450/beta

https://support.cambiumnetworks.com/files/ptp450/beta

  * PMP320 Co-location (5ms Frame support) (This will work on all
bands, but intended for 3.5 and 3.65 at this time.)
  * 7MHz Channel Bandwidth for 3.5 and 3.65 radios
  * Removal of the PTP450 Map for faster link speeds
  * SNMPv3
  * HTTPS
  * Ability to turn off Telnet, FTP and TFTP
  * Read-Only Accounts for Admin, Install, and Tech
  * Sector SA
  * Export of Sessions Status Page
  * Config File export/Import for AP/BHM and SM/BHS

*NOTE:* PMP320 co-location works best when both the PMP450 and PMP320 
are on CMM synch sources.  Cambium is writing a paper on how to adjust 
the radios to best deal with other synch sources, although the radios 
will still work together without adjustment with some impact to 
throughput.


We look forward to you feedback on this release either in this forum 
or at:


http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta

Best,

C*a*mbium Jonathan

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Gino Villarini via Af 
Woaw! Nice…. Is the Sector SA runs on the SMS at the same time or 1 by 1?



Gino A. Villarini
President
Aeronet Wireless Broadband Corp.
www.aeronetpr.com
@aeronetpr



From: "af@afmug.com<mailto:af@afmug.com>" mailto:af@afmug.com>>
Reply-To: "af@afmug.com<mailto:af@afmug.com>" 
mailto:af@afmug.com>>
Date: Wednesday, December 3, 2014 at 1:24 PM
To: "af@afmug.com<mailto:af@afmug.com>" mailto:af@afmug.com>>
Subject: Re: [AFMUG] 13.3 Open Beta

Gino,

Great questions!

Sector SA is a feature that runs a SA on the AP and all the SMs registered to 
it at the same time to get a true picture of the RF environment the AP and the 
SMs are seeing without the influence of the APs energy.

The removal of the MAP in the PTP450 will give around an increase of  3.2 Mbps 
on each Channel Bandwidth.

Best,

Cambium Jonathan

From: Af [mailto:af-boun...@afmug.com] On Behalf Of Gino Villarini via Af
Sent: Wednesday, December 03, 2014 11:20 AM
To: af@afmug.com<mailto:af@afmug.com>
Subject: Re: [AFMUG] 13.3 Open Beta

What is Sector SA? And removal of PT450 MAP?



Gino A. Villarini
President
Aeronet Wireless Broadband Corp.
www.aeronetpr.com<http://www.aeronetpr.com>
@aeronetpr



From: "af@afmug.com<mailto:af@afmug.com>" mailto:af@afmug.com>>
Reply-To: "af@afmug.com<mailto:af@afmug.com>" 
mailto:af@afmug.com>>
Date: Wednesday, December 3, 2014 at 12:44 PM
To: "af@afmug.com<mailto:af@afmug.com>" mailto:af@afmug.com>>
Subject: [AFMUG] 13.3 Open Beta

AF Community,

Please visit the Cambium Networks webpage to down load the Open Beta version of 
13.3 for PMP450 and PTP450 radios.

https://support.cambiumnetworks.com/files/pmp450/beta
https://support.cambiumnetworks.com/files/ptp450/beta
? PMP320 Co-location (5ms Frame support) (This will work on all bands, 
but intended for 3.5 and 3.65 at this time.)
? 7MHz Channel Bandwidth for 3.5 and 3.65 radios
? Removal of the PTP450 Map for faster link speeds
? SNMPv3
? HTTPS
? Ability to turn off Telnet, FTP and TFTP
? Read-Only Accounts for Admin, Install, and Tech
? Sector SA
? Export of Sessions Status Page
? Config File export/Import for AP/BHM and SM/BHS
NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM 
synch sources.  Cambium is writing a paper on how to adjust the radios to best 
deal with other synch sources, although the radios will still work together 
without adjustment with some impact to throughput.
We look forward to you feedback on this release either in this forum or at:
http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta

Best,
Cambium Jonathan

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Aaron Schneider via Af 
13.3 is for PMP450 and PTP450 only.  ;)

That being said, we are close to having a 13.2.1 ready that fixes the issues 
reported with 13.2 including the PTP230 reboot issue.  We have found that the 
problem is VLAN related and only affects PTP230.

Regards,
-Aaron

-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Jonathan Mandziara via Af
Sent: Wednesday, December 03, 2014 11:28 AM
To: af@afmug.com
Subject: Re: [AFMUG] 13.3 Open Beta

Matt,

Another great question.

At this time, 13.2 is for PMP450 and PTP450 Only.

The fix for PTP230 is coming soon.

Best,

Jonathan

-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt via Af
Sent: Wednesday, December 03, 2014 11:27 AM
To: af@afmug.com
Subject: Re: [AFMUG] 13.3 Open Beta

Is the PTP230 constant reboot issue fixed?

> Please visit the Cambium Networks webpage to down load the Open Beta 
> version of 13.3 for PMP450 and PTP450 radios.
>
> https://support.cambiumnetworks.com/files/pmp450/beta
>
> https://support.cambiumnetworks.com/files/ptp450/beta
>
> PMP320 Co-location (5ms Frame support) (This will work on all bands, 
> but intended for 3.5 and 3.65 at this time.)

Will this work with Purwave wimax?  How much throughput do we gain?

> 7MHz Channel Bandwidth for 3.5 and 3.65 radios Removal of the PTP450 
> Map for faster link speeds

How much faster?

> SNMPv3
> HTTPS
> Ability to turn off Telnet, FTP and TFTP Read-Only Accounts for Admin, 
> Install, and Tech Sector SA

This is really cool reading release notes.  Wish we had it on FSK as well.

> Export of Sessions Status Page
> Config File export/Import for AP/BHM and SM/BHS
>
> NOTE: PMP320 co-location works best when both the PMP450 and PMP320 
> are on CMM synch sources.  Cambium is writing a paper on how to adjust 
> the radios to best deal with other synch sources, although the radios 
> will still work together without adjustment with some impact to throughput.
>
> We look forward to you feedback on this release either in this forum or at:
>
> http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Aaron Schneider via Af 
Eric –

We are looking at our options for bringing another release to FSK but I can’t 
comment on that just yet.

-Aaron

From: Af [mailto:af-boun...@afmug.com] On Behalf Of Eric Muehleisen via Af
Sent: Wednesday, December 03, 2014 11:25 AM
To: af@afmug.com
Subject: Re: [AFMUG] 13.3 Open Beta


  *   Read-Only Accounts for Admin, Install, and Tech

ABOUT TIME! We needed this 10 years ago. Any chance of getting this implemented 
on the Canopy FSK platform?


On Wed, Dec 3, 2014 at 10:44 AM, Jonathan Mandziara via Af 
mailto:af@afmug.com>> wrote:
AF Community,

Please visit the Cambium Networks webpage to down load the Open Beta version of 
13.3 for PMP450 and PTP450 radios.

https://support.cambiumnetworks.com/files/pmp450/beta
https://support.cambiumnetworks.com/files/ptp450/beta

  *   PMP320 Co-location (5ms Frame support) (This will work on all bands, but 
intended for 3.5 and 3.65 at this time.)
  *   7MHz Channel Bandwidth for 3.5 and 3.65 radios
  *   Removal of the PTP450 Map for faster link speeds
  *   SNMPv3
  *   HTTPS
  *   Ability to turn off Telnet, FTP and TFTP
  *   Read-Only Accounts for Admin, Install, and Tech
  *   Sector SA
  *   Export of Sessions Status Page
  *   Config File export/Import for AP/BHM and SM/BHS
NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM 
synch sources.  Cambium is writing a paper on how to adjust the radios to best 
deal with other synch sources, although the radios will still work together 
without adjustment with some impact to throughput.
We look forward to you feedback on this release either in this forum or at:
http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta

Best,
Cambium Jonathan

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Aaron Schneider via Af 
When running Sector Spectrum Analyzer (SA), once the sector is done, you'll be 
able to go through the scan results for the AP as well as all of the SMs (via 
the Remote SA page).

For the PTP Map removal, Jonathan is correct in the throughput improvement.  
But be aware that you MUST upgrade the "far" end first as it is an 
incompatibility in the air interface.

Regards,
-Aaron

From: Af [mailto:af-boun...@afmug.com] On Behalf Of Jonathan Mandziara via Af
Sent: Wednesday, December 03, 2014 11:24 AM
To: af@afmug.com
Subject: Re: [AFMUG] 13.3 Open Beta

Gino,

Great questions!

Sector SA is a feature that runs a SA on the AP and all the SMs registered to 
it at the same time to get a true picture of the RF environment the AP and the 
SMs are seeing without the influence of the APs energy.

The removal of the MAP in the PTP450 will give around an increase of  3.2 Mbps 
on each Channel Bandwidth.

Best,

Cambium Jonathan

From: Af [mailto:af-boun...@afmug.com] On Behalf Of Gino Villarini via Af
Sent: Wednesday, December 03, 2014 11:20 AM
To: af@afmug.com<mailto:af@afmug.com>
Subject: Re: [AFMUG] 13.3 Open Beta

What is Sector SA? And removal of PT450 MAP?



Gino A. Villarini
President
Aeronet Wireless Broadband Corp.
www.aeronetpr.com<http://www.aeronetpr.com>
@aeronetpr



From: "af@afmug.com<mailto:af@afmug.com>" mailto:af@afmug.com>>
Reply-To: "af@afmug.com<mailto:af@afmug.com>" 
mailto:af@afmug.com>>
Date: Wednesday, December 3, 2014 at 12:44 PM
To: "af@afmug.com<mailto:af@afmug.com>" mailto:af@afmug.com>>
Subject: [AFMUG] 13.3 Open Beta

AF Community,

Please visit the Cambium Networks webpage to down load the Open Beta version of 
13.3 for PMP450 and PTP450 radios.

https://support.cambiumnetworks.com/files/pmp450/beta
https://support.cambiumnetworks.com/files/ptp450/beta
?PMP320 Co-location (5ms Frame support) (This will work on all bands, 
but intended for 3.5 and 3.65 at this time.)
?7MHz Channel Bandwidth for 3.5 and 3.65 radios
?Removal of the PTP450 Map for faster link speeds
?SNMPv3
?HTTPS
?Ability to turn off Telnet, FTP and TFTP
?Read-Only Accounts for Admin, Install, and Tech
?Sector SA
?Export of Sessions Status Page
?Config File export/Import for AP/BHM and SM/BHS
NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM 
synch sources.  Cambium is writing a paper on how to adjust the radios to best 
deal with other synch sources, although the radios will still work together 
without adjustment with some impact to throughput.
We look forward to you feedback on this release either in this forum or at:
http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta

Best,
Cambium Jonathan

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Jonathan Mandziara via Af 
Matt,

Another great question.

At this time, 13.2 is for PMP450 and PTP450 Only.

The fix for PTP230 is coming soon.

Best,

Jonathan

-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt via Af
Sent: Wednesday, December 03, 2014 11:27 AM
To: af@afmug.com
Subject: Re: [AFMUG] 13.3 Open Beta

Is the PTP230 constant reboot issue fixed?

> Please visit the Cambium Networks webpage to down load the Open Beta 
> version of 13.3 for PMP450 and PTP450 radios.
>
> https://support.cambiumnetworks.com/files/pmp450/beta
>
> https://support.cambiumnetworks.com/files/ptp450/beta
>
> PMP320 Co-location (5ms Frame support) (This will work on all bands, 
> but intended for 3.5 and 3.65 at this time.)

Will this work with Purwave wimax?  How much throughput do we gain?

> 7MHz Channel Bandwidth for 3.5 and 3.65 radios Removal of the PTP450 
> Map for faster link speeds

How much faster?

> SNMPv3
> HTTPS
> Ability to turn off Telnet, FTP and TFTP Read-Only Accounts for Admin, 
> Install, and Tech Sector SA

This is really cool reading release notes.  Wish we had it on FSK as well.

> Export of Sessions Status Page
> Config File export/Import for AP/BHM and SM/BHS
>
> NOTE: PMP320 co-location works best when both the PMP450 and PMP320 
> are on CMM synch sources.  Cambium is writing a paper on how to adjust 
> the radios to best deal with other synch sources, although the radios 
> will still work together without adjustment with some impact to throughput.
>
> We look forward to you feedback on this release either in this forum or at:
>
> http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Matt via Af 
Is the PTP230 constant reboot issue fixed?

> Please visit the Cambium Networks webpage to down load the Open Beta version
> of 13.3 for PMP450 and PTP450 radios.
>
> https://support.cambiumnetworks.com/files/pmp450/beta
>
> https://support.cambiumnetworks.com/files/ptp450/beta
>
> PMP320 Co-location (5ms Frame support) (This will work on all bands, but
> intended for 3.5 and 3.65 at this time.)

Will this work with Purwave wimax?  How much throughput do we gain?

> 7MHz Channel Bandwidth for 3.5 and 3.65 radios
> Removal of the PTP450 Map for faster link speeds

How much faster?

> SNMPv3
> HTTPS
> Ability to turn off Telnet, FTP and TFTP
> Read-Only Accounts for Admin, Install, and Tech
> Sector SA

This is really cool reading release notes.  Wish we had it on FSK as well.

> Export of Sessions Status Page
> Config File export/Import for AP/BHM and SM/BHS
>
> NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on
> CMM synch sources.  Cambium is writing a paper on how to adjust the radios
> to best deal with other synch sources, although the radios will still work
> together without adjustment with some impact to throughput.
>
> We look forward to you feedback on this release either in this forum or at:
>
> http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Eric Muehleisen via Af 
   - Read-Only Accounts for Admin, Install, and Tech


ABOUT TIME! We needed this 10 years ago. Any chance of getting this
implemented on the Canopy FSK platform?


On Wed, Dec 3, 2014 at 10:44 AM, Jonathan Mandziara via Af 
wrote:

>AF Community,
>
>
>
> Please visit the Cambium Networks webpage to down load the Open Beta
> version of 13.3 for PMP450 and PTP450 radios.
>
>
>
> https://support.cambiumnetworks.com/files/pmp450/beta
>
> https://support.cambiumnetworks.com/files/ptp450/beta
>
>- PMP320 Co-location (5ms Frame support) (This will work on all bands,
>but intended for 3.5 and 3.65 at this time.)
>- 7MHz Channel Bandwidth for 3.5 and 3.65 radios
>- Removal of the PTP450 Map for faster link speeds
>- SNMPv3
>- HTTPS
>- Ability to turn off Telnet, FTP and TFTP
>- Read-Only Accounts for Admin, Install, and Tech
>- Sector SA
>- Export of Sessions Status Page
>- Config File export/Import for AP/BHM and SM/BHS
>
>  *NOTE:* PMP320 co-location works best when both the PMP450 and PMP320
> are on CMM synch sources.  Cambium is writing a paper on how to adjust the
> radios to best deal with other synch sources, although the radios will
> still work together without adjustment with some impact to throughput.
>
> We look forward to you feedback on this release either in this forum or at:
>
> http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta
>
>
>
> Best,
>
> C*a*mbium Jonathan
>
>
>

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Jonathan Mandziara via Af 
Gino,

Great questions!

Sector SA is a feature that runs a SA on the AP and all the SMs registered to 
it at the same time to get a true picture of the RF environment the AP and the 
SMs are seeing without the influence of the APs energy.

The removal of the MAP in the PTP450 will give around an increase of  3.2 Mbps 
on each Channel Bandwidth.

Best,

Cambium Jonathan

From: Af [mailto:af-boun...@afmug.com] On Behalf Of Gino Villarini via Af
Sent: Wednesday, December 03, 2014 11:20 AM
To: af@afmug.com
Subject: Re: [AFMUG] 13.3 Open Beta

What is Sector SA? And removal of PT450 MAP?



Gino A. Villarini
President
Aeronet Wireless Broadband Corp.
www.aeronetpr.com<http://www.aeronetpr.com>
@aeronetpr



From: "af@afmug.com<mailto:af@afmug.com>" mailto:af@afmug.com>>
Reply-To: "af@afmug.com<mailto:af@afmug.com>" 
mailto:af@afmug.com>>
Date: Wednesday, December 3, 2014 at 12:44 PM
To: "af@afmug.com<mailto:af@afmug.com>" mailto:af@afmug.com>>
Subject: [AFMUG] 13.3 Open Beta

AF Community,

Please visit the Cambium Networks webpage to down load the Open Beta version of 
13.3 for PMP450 and PTP450 radios.

https://support.cambiumnetworks.com/files/pmp450/beta
https://support.cambiumnetworks.com/files/ptp450/beta
? PMP320 Co-location (5ms Frame support) (This will work on all bands, 
but intended for 3.5 and 3.65 at this time.)
? 7MHz Channel Bandwidth for 3.5 and 3.65 radios
? Removal of the PTP450 Map for faster link speeds
? SNMPv3
? HTTPS
? Ability to turn off Telnet, FTP and TFTP
? Read-Only Accounts for Admin, Install, and Tech
? Sector SA
? Export of Sessions Status Page
? Config File export/Import for AP/BHM and SM/BHS
NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM 
synch sources.  Cambium is writing a paper on how to adjust the radios to best 
deal with other synch sources, although the radios will still work together 
without adjustment with some impact to throughput.
We look forward to you feedback on this release either in this forum or at:
http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta

Best,
Cambium Jonathan

Re: [AFMUG] 13.3 Open Beta

2014-12-03 Thread Gino Villarini via Af 
What is Sector SA? And removal of PT450 MAP?



Gino A. Villarini
President
Aeronet Wireless Broadband Corp.
www.aeronetpr.com
@aeronetpr



From: "af@afmug.com<mailto:af@afmug.com>" mailto:af@afmug.com>>
Reply-To: "af@afmug.com<mailto:af@afmug.com>" 
mailto:af@afmug.com>>
Date: Wednesday, December 3, 2014 at 12:44 PM
To: "af@afmug.com<mailto:af@afmug.com>" mailto:af@afmug.com>>
Subject: [AFMUG] 13.3 Open Beta

AF Community,

Please visit the Cambium Networks webpage to down load the Open Beta version of 
13.3 for PMP450 and PTP450 radios.

https://support.cambiumnetworks.com/files/pmp450/beta
https://support.cambiumnetworks.com/files/ptp450/beta

  *   PMP320 Co-location (5ms Frame support) (This will work on all bands, but 
intended for 3.5 and 3.65 at this time.)
  *   7MHz Channel Bandwidth for 3.5 and 3.65 radios
  *   Removal of the PTP450 Map for faster link speeds
  *   SNMPv3
  *   HTTPS
  *   Ability to turn off Telnet, FTP and TFTP
  *   Read-Only Accounts for Admin, Install, and Tech
  *   Sector SA
  *   Export of Sessions Status Page
  *   Config File export/Import for AP/BHM and SM/BHS
NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM 
synch sources.  Cambium is writing a paper on how to adjust the radios to best 
deal with other synch sources, although the radios will still work together 
without adjustment with some impact to throughput.
We look forward to you feedback on this release either in this forum or at:
http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta

Best,
Cambium Jonathan

[AFMUG] 13.3 Open Beta

2014-12-03 Thread Jonathan Mandziara via Af 
AF Community,

Please visit the Cambium Networks webpage to down load the Open Beta version of 
13.3 for PMP450 and PTP450 radios.

https://support.cambiumnetworks.com/files/pmp450/beta
https://support.cambiumnetworks.com/files/ptp450/beta

  *   PMP320 Co-location (5ms Frame support) (This will work on all bands, but 
intended for 3.5 and 3.65 at this time.)
  *   7MHz Channel Bandwidth for 3.5 and 3.65 radios
  *   Removal of the PTP450 Map for faster link speeds
  *   SNMPv3
  *   HTTPS
  *   Ability to turn off Telnet, FTP and TFTP
  *   Read-Only Accounts for Admin, Install, and Tech
  *   Sector SA
  *   Export of Sessions Status Page
  *   Config File export/Import for AP/BHM and SM/BHS
NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM 
synch sources.  Cambium is writing a paper on how to adjust the radios to best 
deal with other synch sources, although the radios will still work together 
without adjustment with some impact to throughput.
We look forward to you feedback on this release either in this forum or at:
http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta

Best,
Cambium Jonathan