Re: [AFMUG] APC PRM-24 - cut them up??
they make a smaller version... On 4/24/2015 9:58 AM, Paul McCall wrote: Physical size is the reason, not cost *From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *Chuck McCown *Sent:* Friday, April 24, 2015 10:55 AM *To:* af@afmug.com *Subject:* Re: [AFMUG] APC PRM-24 - cut them up?? We can but they would probably cost double. Is the physical size a problem? The cost shouldn’t, on Amazon they are dirt cheap. *From:*Paul McCall mailto:pa...@pdmnet.net *Sent:*Friday, April 24, 2015 8:40 AM *To:*af@afmug.com mailto:af@afmug.com *Subject:*[AFMUG] APC PRM-24 - cut them up?? Anybody cut these in half (or thirds) for when you need more than 4 and a lot less than 24 ports? Paul McCall, Pres. PDMNet / Florida Broadband 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 office 772-473-0352 cell www.pdmnet.com http://www.pdmnet.com/ pa...@pdmnet.net mailto:pa...@pdmnet.net
Re: [AFMUG] APC PRM-24 - cut them up??
Also note the PRM4 comes with a joining plate to stack them either direction if you need more than 4 positions. http://www.apcmedia.com/salestools/ASTE-6Z7V6E/ASTE-6Z7V6E_R1_EN.pdf There is also an optional L bracket for mounting it. From: Keefe John Sent: Monday, April 27, 2015 12:56 PM To: af@afmug.com Subject: Re: [AFMUG] APC PRM-24 - cut them up?? they make a smaller version... On 4/24/2015 9:58 AM, Paul McCall wrote: Physical size is the reason, not cost From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck McCown Sent: Friday, April 24, 2015 10:55 AM To: af@afmug.com Subject: Re: [AFMUG] APC PRM-24 - cut them up?? We can but they would probably cost double. Is the physical size a problem? The cost shouldn’t, on Amazon they are dirt cheap. From: Paul McCall Sent: Friday, April 24, 2015 8:40 AM To: af@afmug.com Subject: [AFMUG] APC PRM-24 - cut them up?? Anybody cut these in half (or thirds) for when you need more than 4 and a lot less than 24 ports? Paul McCall, Pres. PDMNet / Florida Broadband 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 office 772-473-0352 cell www.pdmnet.com pa...@pdmnet.net
Re: [AFMUG] APC PRM-24 - cut them up??
I have both chucks and the APC I attached the DIN clips to. I prefer the WB, but cant justify the 4x cost. I REAY wish chuck would make a single/double slot residential version so we dont have to maintain two separate sets of SS, If he put a grounding grommet on the existing ones to fasten them into the SS housings- sweet On Fri, Apr 24, 2015 at 10:47 PM, George Skorup (Cyber Broadcasting) geo...@cbcast.com wrote: I'd rather just give Chuck the money for his effort instead of wasting my time trying to do it myself cheaper. We also just got a couple of the WB modified PRM4 chassis's from WAV if anyone is looking for some, maybe they still have some. On 4/24/2015 12:22 PM, TJ Trout wrote: Although I must say chucks metal din clip is amazing On Apr 24, 2015 10:21 AM, TJ Trout t...@voltbb.com wrote: Din clips are $1 On Apr 24, 2015 10:18 AM, Josh Baird joshba...@gmail.com wrote: PRM4's are ~$15, and the MSRP for that is $70. So, I'm guessing they are ~$50 from a distributor? On Fri, Apr 24, 2015 at 1:00 PM, Sean Heskett af...@zirkel.us wrote: http://wbmfg.com/products.cfm?PID=39 On Friday, April 24, 2015, Josh Baird joshba...@gmail.com wrote: PRM4's are hard to find these days. Anybody have a secret source? On Fri, Apr 24, 2015 at 11:19 AM, Ken Hohhof af...@kwisp.com wrote: No, but I have used multiple PRM4’s at a site. *From:* Gino Villarini *Sent:* Friday, April 24, 2015 9:44 AM *To:* af@afmug.com *Subject:* Re: [AFMUG] APC PRM-24 - cut them up?? No, but why… they are not that expensive Gino A. Villarini President From: Paul McCall pa...@pdmnet.net Reply-To: af@afmug.com af@afmug.com Date: Friday, April 24, 2015 at 10:40 AM To: af@afmug.com af@afmug.com Subject: [AFMUG] APC PRM-24 - cut them up?? Anybody cut these in half (or thirds) for when you need more than 4 and a lot less than 24 ports? Paul McCall, Pres. PDMNet / Florida Broadband 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 office 772-473-0352 cell www.pdmnet.com pa...@pdmnet.net -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.
Re: [AFMUG] APC PRM-24 - cut them up??
OK, I will come up with some options for you guys. From: That One Guy /sarcasm Sent: Saturday, April 25, 2015 9:48 AM To: af@afmug.com Subject: Re: [AFMUG] APC PRM-24 - cut them up?? I have both chucks and the APC I attached the DIN clips to. I prefer the WB, but cant justify the 4x cost. I REAY wish chuck would make a single/double slot residential version so we dont have to maintain two separate sets of SS, If he put a grounding grommet on the existing ones to fasten them into the SS housings- sweet On Fri, Apr 24, 2015 at 10:47 PM, George Skorup (Cyber Broadcasting) geo...@cbcast.com wrote: I'd rather just give Chuck the money for his effort instead of wasting my time trying to do it myself cheaper. We also just got a couple of the WB modified PRM4 chassis's from WAV if anyone is looking for some, maybe they still have some. On 4/24/2015 12:22 PM, TJ Trout wrote: Although I must say chucks metal din clip is amazing On Apr 24, 2015 10:21 AM, TJ Trout t...@voltbb.com wrote: Din clips are $1 On Apr 24, 2015 10:18 AM, Josh Baird joshba...@gmail.com wrote: PRM4's are ~$15, and the MSRP for that is $70. So, I'm guessing they are ~$50 from a distributor? On Fri, Apr 24, 2015 at 1:00 PM, Sean Heskett af...@zirkel.us wrote: http://wbmfg.com/products.cfm?PID=39 On Friday, April 24, 2015, Josh Baird joshba...@gmail.com wrote: PRM4's are hard to find these days. Anybody have a secret source? On Fri, Apr 24, 2015 at 11:19 AM, Ken Hohhof af...@kwisp.com wrote: No, but I have used multiple PRM4’s at a site. From: Gino Villarini Sent: Friday, April 24, 2015 9:44 AM To: af@afmug.com Subject: Re: [AFMUG] APC PRM-24 - cut them up?? No, but why… they are not that expensive Gino A. Villarini President From: Paul McCall pa...@pdmnet.net Reply-To: af@afmug.com af@afmug.com Date: Friday, April 24, 2015 at 10:40 AM To: af@afmug.com af@afmug.com Subject: [AFMUG] APC PRM-24 - cut them up?? Anybody cut these in half (or thirds) for when you need more than 4 and a lot less than 24 ports? Paul McCall, Pres. PDMNet / Florida Broadband 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 office 772-473-0352 cell www.pdmnet.com pa...@pdmnet.net -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.
Re: [AFMUG] APC PRM-24 - cut them up??
We can but they would probably cost double. Is the physical size a problem? The cost shouldn’t, on Amazon they are dirt cheap. From: Paul McCall Sent: Friday, April 24, 2015 8:40 AM To: af@afmug.com Subject: [AFMUG] APC PRM-24 - cut them up?? Anybody cut these in half (or thirds) for when you need more than 4 and a lot less than 24 ports? Paul McCall, Pres. PDMNet / Florida Broadband 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 office 772-473-0352 cell www.pdmnet.com pa...@pdmnet.net
Re: [AFMUG] APC PRM-24 - cut them up??
Someone at APC must be wondering “why do we sell so many chassis and so few modules”. From: ch...@wbmfg.com Sent: Friday, April 24, 2015 12:27 PM To: af@afmug.com Subject: Re: [AFMUG] APC PRM-24 - cut them up?? Yeah, you can get cheaper clips and do them yourself. We consider this the razor, not the razor blade. Would rather sell the blades. From: TJ Trout Sent: Friday, April 24, 2015 11:22 AM To: af@afmug.com Subject: Re: [AFMUG] APC PRM-24 - cut them up?? Although I must say chucks metal din clip is amazing On Apr 24, 2015 10:21 AM, TJ Trout t...@voltbb.com wrote: Din clips are $1 On Apr 24, 2015 10:18 AM, Josh Baird joshba...@gmail.com wrote: PRM4's are ~$15, and the MSRP for that is $70. So, I'm guessing they are ~$50 from a distributor? On Fri, Apr 24, 2015 at 1:00 PM, Sean Heskett af...@zirkel.us wrote: http://wbmfg.com/products.cfm?PID=39 On Friday, April 24, 2015, Josh Baird joshba...@gmail.com wrote: PRM4's are hard to find these days. Anybody have a secret source? On Fri, Apr 24, 2015 at 11:19 AM, Ken Hohhof af...@kwisp.com wrote: No, but I have used multiple PRM4’s at a site. From: Gino Villarini Sent: Friday, April 24, 2015 9:44 AM To: af@afmug.com Subject: Re: [AFMUG] APC PRM-24 - cut them up?? No, but why… they are not that expensive Gino A. Villarini President From: Paul McCall pa...@pdmnet.net Reply-To: af@afmug.com af@afmug.com Date: Friday, April 24, 2015 at 10:40 AM To: af@afmug.com af@afmug.com Subject: [AFMUG] APC PRM-24 - cut them up?? Anybody cut these in half (or thirds) for when you need more than 4 and a lot less than 24 ports? Paul McCall, Pres. PDMNet / Florida Broadband 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 office 772-473-0352 cell www.pdmnet.com pa...@pdmnet.net
Re: [AFMUG] APC PRM-24 - cut them up??
Physical size is the reason, not cost From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck McCown Sent: Friday, April 24, 2015 10:55 AM To: af@afmug.com Subject: Re: [AFMUG] APC PRM-24 - cut them up?? We can but they would probably cost double. Is the physical size a problem? The cost shouldn’t, on Amazon they are dirt cheap. From: Paul McCallmailto:pa...@pdmnet.net Sent: Friday, April 24, 2015 8:40 AM To: af@afmug.commailto:af@afmug.com Subject: [AFMUG] APC PRM-24 - cut them up?? Anybody cut these in half (or thirds) for when you need more than 4 and a lot less than 24 ports? Paul McCall, Pres. PDMNet / Florida Broadband 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 office 772-473-0352 cell www.pdmnet.comhttp://www.pdmnet.com/ pa...@pdmnet.netmailto:pa...@pdmnet.net
[AFMUG] APC PRM-24 - cut them up??
Anybody cut these in half (or thirds) for when you need more than 4 and a lot less than 24 ports? Paul McCall, Pres. PDMNet / Florida Broadband 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 office 772-473-0352 cell www.pdmnet.comhttp://www.pdmnet.com/ pa...@pdmnet.netmailto:pa...@pdmnet.net
Re: [AFMUG] APC PRM-24 - cut them up??
No, but why… they are not that expensive Gino A. Villarini President [cid:F58A4B74-F668-4624-AA23-6AF5199A2AF7] From: Paul McCall pa...@pdmnet.netmailto:pa...@pdmnet.net Reply-To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Date: Friday, April 24, 2015 at 10:40 AM To: af@afmug.commailto:af@afmug.com af@afmug.commailto:af@afmug.com Subject: [AFMUG] APC PRM-24 - cut them up?? Anybody cut these in half (or thirds) for when you need more than 4 and a lot less than 24 ports? Paul McCall, Pres. PDMNet / Florida Broadband 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 office 772-473-0352 cell www.pdmnet.comhttp://www.pdmnet.com/ pa...@pdmnet.netmailto:pa...@pdmnet.net
Re: [AFMUG] APC PRM-24 - cut them up??
No, but I have used multiple PRM4’s at a site. From: Gino Villarini Sent: Friday, April 24, 2015 9:44 AM To: af@afmug.com Subject: Re: [AFMUG] APC PRM-24 - cut them up?? No, but why… they are not that expensive Gino A. Villarini President From: Paul McCall pa...@pdmnet.net Reply-To: af@afmug.com af@afmug.com Date: Friday, April 24, 2015 at 10:40 AM To: af@afmug.com af@afmug.com Subject: [AFMUG] APC PRM-24 - cut them up?? Anybody cut these in half (or thirds) for when you need more than 4 and a lot less than 24 ports? Paul McCall, Pres. PDMNet / Florida Broadband 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 office 772-473-0352 cell www.pdmnet.com pa...@pdmnet.net
Re: [AFMUG] APC PRM-24 - cut them up??
I'd rather just give Chuck the money for his effort instead of wasting my time trying to do it myself cheaper. We also just got a couple of the WB modified PRM4 chassis's from WAV if anyone is looking for some, maybe they still have some. On 4/24/2015 12:22 PM, TJ Trout wrote: Although I must say chucks metal din clip is amazing On Apr 24, 2015 10:21 AM, TJ Trout t...@voltbb.com mailto:t...@voltbb.com wrote: Din clips are $1 On Apr 24, 2015 10:18 AM, Josh Baird joshba...@gmail.com mailto:joshba...@gmail.com wrote: PRM4's are ~$15, and the MSRP for that is $70. So, I'm guessing they are ~$50 from a distributor? On Fri, Apr 24, 2015 at 1:00 PM, Sean Heskett af...@zirkel.us mailto:af...@zirkel.us wrote: http://wbmfg.com/products.cfm?PID=39 On Friday, April 24, 2015, Josh Baird joshba...@gmail.com mailto:joshba...@gmail.com wrote: PRM4's are hard to find these days. Anybody have a secret source? On Fri, Apr 24, 2015 at 11:19 AM, Ken Hohhof af...@kwisp.com wrote: No, but I have used multiple PRM4’s at a site. *From:* Gino Villarini *Sent:* Friday, April 24, 2015 9:44 AM *To:* af@afmug.com *Subject:* Re: [AFMUG] APC PRM-24 - cut them up?? No, but why… they are not that expensive Gino A. Villarini President From: Paul McCall pa...@pdmnet.net Reply-To: af@afmug.com af@afmug.com Date: Friday, April 24, 2015 at 10:40 AM To: af@afmug.com af@afmug.com Subject: [AFMUG] APC PRM-24 - cut them up?? Anybody cut these in half (or thirds) for when you need more than 4 and a lot less than 24 ports? Paul McCall, Pres. PDMNet / Florida Broadband 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 tel:772-564-6800 office 772-473-0352 tel:772-473-0352 cell www.pdmnet.com http://www.pdmnet.com/ pa...@pdmnet.net
Re: [AFMUG] APC PRM-24 - cut them up??
PRM4's are hard to find these days. Anybody have a secret source? On Fri, Apr 24, 2015 at 11:19 AM, Ken Hohhof af...@kwisp.com wrote: No, but I have used multiple PRM4’s at a site. *From:* Gino Villarini g...@aeronetpr.com *Sent:* Friday, April 24, 2015 9:44 AM *To:* af@afmug.com *Subject:* Re: [AFMUG] APC PRM-24 - cut them up?? No, but why… they are not that expensive Gino A. Villarini President From: Paul McCall pa...@pdmnet.net Reply-To: af@afmug.com af@afmug.com Date: Friday, April 24, 2015 at 10:40 AM To: af@afmug.com af@afmug.com Subject: [AFMUG] APC PRM-24 - cut them up?? Anybody cut these in half (or thirds) for when you need more than 4 and a lot less than 24 ports? Paul McCall, Pres. PDMNet / Florida Broadband 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 office 772-473-0352 cell www.pdmnet.com pa...@pdmnet.net
Re: [AFMUG] APC PRM-24 - cut them up??
PRM4's are ~$15, and the MSRP for that is $70. So, I'm guessing they are ~$50 from a distributor? On Fri, Apr 24, 2015 at 1:00 PM, Sean Heskett af...@zirkel.us wrote: http://wbmfg.com/products.cfm?PID=39 On Friday, April 24, 2015, Josh Baird joshba...@gmail.com wrote: PRM4's are hard to find these days. Anybody have a secret source? On Fri, Apr 24, 2015 at 11:19 AM, Ken Hohhof af...@kwisp.com wrote: No, but I have used multiple PRM4’s at a site. *From:* Gino Villarini *Sent:* Friday, April 24, 2015 9:44 AM *To:* af@afmug.com *Subject:* Re: [AFMUG] APC PRM-24 - cut them up?? No, but why… they are not that expensive Gino A. Villarini President From: Paul McCall pa...@pdmnet.net Reply-To: af@afmug.com af@afmug.com Date: Friday, April 24, 2015 at 10:40 AM To: af@afmug.com af@afmug.com Subject: [AFMUG] APC PRM-24 - cut them up?? Anybody cut these in half (or thirds) for when you need more than 4 and a lot less than 24 ports? Paul McCall, Pres. PDMNet / Florida Broadband 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 office 772-473-0352 cell www.pdmnet.com pa...@pdmnet.net
Re: [AFMUG] APC PRM-24 - cut them up??
Although I must say chucks metal din clip is amazing On Apr 24, 2015 10:21 AM, TJ Trout t...@voltbb.com wrote: Din clips are $1 On Apr 24, 2015 10:18 AM, Josh Baird joshba...@gmail.com wrote: PRM4's are ~$15, and the MSRP for that is $70. So, I'm guessing they are ~$50 from a distributor? On Fri, Apr 24, 2015 at 1:00 PM, Sean Heskett af...@zirkel.us wrote: http://wbmfg.com/products.cfm?PID=39 On Friday, April 24, 2015, Josh Baird joshba...@gmail.com wrote: PRM4's are hard to find these days. Anybody have a secret source? On Fri, Apr 24, 2015 at 11:19 AM, Ken Hohhof af...@kwisp.com wrote: No, but I have used multiple PRM4’s at a site. *From:* Gino Villarini *Sent:* Friday, April 24, 2015 9:44 AM *To:* af@afmug.com *Subject:* Re: [AFMUG] APC PRM-24 - cut them up?? No, but why… they are not that expensive Gino A. Villarini President From: Paul McCall pa...@pdmnet.net Reply-To: af@afmug.com af@afmug.com Date: Friday, April 24, 2015 at 10:40 AM To: af@afmug.com af@afmug.com Subject: [AFMUG] APC PRM-24 - cut them up?? Anybody cut these in half (or thirds) for when you need more than 4 and a lot less than 24 ports? Paul McCall, Pres. PDMNet / Florida Broadband 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 office 772-473-0352 cell www.pdmnet.com pa...@pdmnet.net
Re: [AFMUG] APC PRM-24 - cut them up??
We add the DIN and do a few other things. Yes PRM4 from Amazon is a good deal. From: Josh Baird Sent: Friday, April 24, 2015 11:18 AM To: af@afmug.com Subject: Re: [AFMUG] APC PRM-24 - cut them up?? PRM4's are ~$15, and the MSRP for that is $70. So, I'm guessing they are ~$50 from a distributor? On Fri, Apr 24, 2015 at 1:00 PM, Sean Heskett af...@zirkel.us wrote: http://wbmfg.com/products.cfm?PID=39 On Friday, April 24, 2015, Josh Baird joshba...@gmail.com wrote: PRM4's are hard to find these days. Anybody have a secret source? On Fri, Apr 24, 2015 at 11:19 AM, Ken Hohhof af...@kwisp.com wrote: No, but I have used multiple PRM4’s at a site. From: Gino Villarini Sent: Friday, April 24, 2015 9:44 AM To: af@afmug.com Subject: Re: [AFMUG] APC PRM-24 - cut them up?? No, but why… they are not that expensive Gino A. Villarini President From: Paul McCall pa...@pdmnet.net Reply-To: af@afmug.com af@afmug.com Date: Friday, April 24, 2015 at 10:40 AM To: af@afmug.com af@afmug.com Subject: [AFMUG] APC PRM-24 - cut them up?? Anybody cut these in half (or thirds) for when you need more than 4 and a lot less than 24 ports? Paul McCall, Pres. PDMNet / Florida Broadband 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 office 772-473-0352 cell www.pdmnet.com pa...@pdmnet.net
Re: [AFMUG] APC PRM-24 - cut them up??
Yeah, you can get cheaper clips and do them yourself. We consider this the razor, not the razor blade. Would rather sell the blades. From: TJ Trout Sent: Friday, April 24, 2015 11:22 AM To: af@afmug.com Subject: Re: [AFMUG] APC PRM-24 - cut them up?? Although I must say chucks metal din clip is amazing On Apr 24, 2015 10:21 AM, TJ Trout t...@voltbb.com wrote: Din clips are $1 On Apr 24, 2015 10:18 AM, Josh Baird joshba...@gmail.com wrote: PRM4's are ~$15, and the MSRP for that is $70. So, I'm guessing they are ~$50 from a distributor? On Fri, Apr 24, 2015 at 1:00 PM, Sean Heskett af...@zirkel.us wrote: http://wbmfg.com/products.cfm?PID=39 On Friday, April 24, 2015, Josh Baird joshba...@gmail.com wrote: PRM4's are hard to find these days. Anybody have a secret source? On Fri, Apr 24, 2015 at 11:19 AM, Ken Hohhof af...@kwisp.com wrote: No, but I have used multiple PRM4’s at a site. From: Gino Villarini Sent: Friday, April 24, 2015 9:44 AM To: af@afmug.com Subject: Re: [AFMUG] APC PRM-24 - cut them up?? No, but why… they are not that expensive Gino A. Villarini President From: Paul McCall pa...@pdmnet.net Reply-To: af@afmug.com af@afmug.com Date: Friday, April 24, 2015 at 10:40 AM To: af@afmug.com af@afmug.com Subject: [AFMUG] APC PRM-24 - cut them up?? Anybody cut these in half (or thirds) for when you need more than 4 and a lot less than 24 ports? Paul McCall, Pres. PDMNet / Florida Broadband 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 office 772-473-0352 cell www.pdmnet.com pa...@pdmnet.net
Re: [AFMUG] APC PRM-24 - cut them up??
http://wbmfg.com/products.cfm?PID=39 On Friday, April 24, 2015, Josh Baird joshba...@gmail.com wrote: PRM4's are hard to find these days. Anybody have a secret source? On Fri, Apr 24, 2015 at 11:19 AM, Ken Hohhof af...@kwisp.com javascript:_e(%7B%7D,'cvml','af...@kwisp.com'); wrote: No, but I have used multiple PRM4’s at a site. *From:* Gino Villarini javascript:_e(%7B%7D,'cvml','g...@aeronetpr.com'); *Sent:* Friday, April 24, 2015 9:44 AM *To:* af@afmug.com javascript:_e(%7B%7D,'cvml','af@afmug.com'); *Subject:* Re: [AFMUG] APC PRM-24 - cut them up?? No, but why… they are not that expensive Gino A. Villarini President From: Paul McCall pa...@pdmnet.net javascript:_e(%7B%7D,'cvml','pa...@pdmnet.net'); Reply-To: af@afmug.com javascript:_e(%7B%7D,'cvml','af@afmug.com'); af@afmug.com javascript:_e(%7B%7D,'cvml','af@afmug.com'); Date: Friday, April 24, 2015 at 10:40 AM To: af@afmug.com javascript:_e(%7B%7D,'cvml','af@afmug.com'); af@afmug.com javascript:_e(%7B%7D,'cvml','af@afmug.com'); Subject: [AFMUG] APC PRM-24 - cut them up?? Anybody cut these in half (or thirds) for when you need more than 4 and a lot less than 24 ports? Paul McCall, Pres. PDMNet / Florida Broadband 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 office 772-473-0352 cell www.pdmnet.com pa...@pdmnet.net javascript:_e(%7B%7D,'cvml','pa...@pdmnet.net');
Re: [AFMUG] APC PRM-24 - cut them up??
Din clips are $1 On Apr 24, 2015 10:18 AM, Josh Baird joshba...@gmail.com wrote: PRM4's are ~$15, and the MSRP for that is $70. So, I'm guessing they are ~$50 from a distributor? On Fri, Apr 24, 2015 at 1:00 PM, Sean Heskett af...@zirkel.us wrote: http://wbmfg.com/products.cfm?PID=39 On Friday, April 24, 2015, Josh Baird joshba...@gmail.com wrote: PRM4's are hard to find these days. Anybody have a secret source? On Fri, Apr 24, 2015 at 11:19 AM, Ken Hohhof af...@kwisp.com wrote: No, but I have used multiple PRM4’s at a site. *From:* Gino Villarini *Sent:* Friday, April 24, 2015 9:44 AM *To:* af@afmug.com *Subject:* Re: [AFMUG] APC PRM-24 - cut them up?? No, but why… they are not that expensive Gino A. Villarini President From: Paul McCall pa...@pdmnet.net Reply-To: af@afmug.com af@afmug.com Date: Friday, April 24, 2015 at 10:40 AM To: af@afmug.com af@afmug.com Subject: [AFMUG] APC PRM-24 - cut them up?? Anybody cut these in half (or thirds) for when you need more than 4 and a lot less than 24 ports? Paul McCall, Pres. PDMNet / Florida Broadband 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 office 772-473-0352 cell www.pdmnet.com pa...@pdmnet.net
Re: [AFMUG] APC PRM-24 - cut them up??
Yep, if you can actually find anyone who has them in stock. They used to be easy to find, but I can't find any for a reasonable price at the moment. On Fri, Apr 24, 2015 at 1:27 PM, ch...@wbmfg.com wrote: We add the DIN and do a few other things. Yes PRM4 from Amazon is a good deal. *From:* Josh Baird joshba...@gmail.com *Sent:* Friday, April 24, 2015 11:18 AM *To:* af@afmug.com *Subject:* Re: [AFMUG] APC PRM-24 - cut them up?? PRM4's are ~$15, and the MSRP for that is $70. So, I'm guessing they are ~$50 from a distributor? On Fri, Apr 24, 2015 at 1:00 PM, Sean Heskett af...@zirkel.us wrote: http://wbmfg.com/products.cfm?PID=39 On Friday, April 24, 2015, Josh Baird joshba...@gmail.com wrote: PRM4's are hard to find these days. Anybody have a secret source? On Fri, Apr 24, 2015 at 11:19 AM, Ken Hohhof af...@kwisp.com wrote: No, but I have used multiple PRM4’s at a site. *From:* Gino Villarini *Sent:* Friday, April 24, 2015 9:44 AM *To:* af@afmug.com *Subject:* Re: [AFMUG] APC PRM-24 - cut them up?? No, but why… they are not that expensive Gino A. Villarini President From: Paul McCall pa...@pdmnet.net Reply-To: af@afmug.com af@afmug.com Date: Friday, April 24, 2015 at 10:40 AM To: af@afmug.com af@afmug.com Subject: [AFMUG] APC PRM-24 - cut them up?? Anybody cut these in half (or thirds) for when you need more than 4 and a lot less than 24 ports? Paul McCall, Pres. PDMNet / Florida Broadband 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 office 772-473-0352 cell www.pdmnet.com pa...@pdmnet.net
Re: [AFMUG] APC PRM-24 - cut them up??
I got a couple this week from PCNation so they would have actually come from Ingram or Techdata. At the time it was showing as “low stock, order soon” but now they show it as “call for availability”. From: Josh Baird Sent: Friday, April 24, 2015 12:41 PM To: af@afmug.com Subject: Re: [AFMUG] APC PRM-24 - cut them up?? Yep, if you can actually find anyone who has them in stock. They used to be easy to find, but I can't find any for a reasonable price at the moment. On Fri, Apr 24, 2015 at 1:27 PM, ch...@wbmfg.com wrote: We add the DIN and do a few other things. Yes PRM4 from Amazon is a good deal. From: Josh Baird Sent: Friday, April 24, 2015 11:18 AM To: af@afmug.com Subject: Re: [AFMUG] APC PRM-24 - cut them up?? PRM4's are ~$15, and the MSRP for that is $70. So, I'm guessing they are ~$50 from a distributor? On Fri, Apr 24, 2015 at 1:00 PM, Sean Heskett af...@zirkel.us wrote: http://wbmfg.com/products.cfm?PID=39 On Friday, April 24, 2015, Josh Baird joshba...@gmail.com wrote: PRM4's are hard to find these days. Anybody have a secret source? On Fri, Apr 24, 2015 at 11:19 AM, Ken Hohhof af...@kwisp.com wrote: No, but I have used multiple PRM4’s at a site. From: Gino Villarini Sent: Friday, April 24, 2015 9:44 AM To: af@afmug.com Subject: Re: [AFMUG] APC PRM-24 - cut them up?? No, but why… they are not that expensive Gino A. Villarini President From: Paul McCall pa...@pdmnet.net Reply-To: af@afmug.com af@afmug.com Date: Friday, April 24, 2015 at 10:40 AM To: af@afmug.com af@afmug.com Subject: [AFMUG] APC PRM-24 - cut them up?? Anybody cut these in half (or thirds) for when you need more than 4 and a lot less than 24 ports? Paul McCall, Pres. PDMNet / Florida Broadband 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 office 772-473-0352 cell www.pdmnet.com pa...@pdmnet.net
