Re: [AFMUG] Trango Apex Lynx/Orion feature request
Whoops, Trango. Sorry, got my T words mixed up. -- Original Message -- From: "Jeremy Grip" <g...@nbnworks.net> To: af@afmug.com Sent: 9/6/2016 9:18:51 PM Subject: Re: [AFMUG] Trango Apex Lynx/Orion feature request Telrad or Trango support? Sent from my iPhone On Sep 6, 2016, at 9:15 PM, Adam Moffett <dmmoff...@gmail.com> wrote: I just realized I suck at commas. My apologies to grammar nazis. -- Original Message -- From: "Adam Moffett" <dmmoff...@gmail.com> To: "Animal Farm" <af@afmug.com> Sent: 9/6/2016 9:14:08 PM Subject: [AFMUG] Trango Apex Lynx/Orion feature request I submitted the feature request below to Telrad's online ticketing system earlier today, and they replied that they'll pass the request to engineering. If you use either the Apex Lynx or Apex Orion and if you agree with what I'm saying below then please add your voice to mine and ask for this feature. "" Feature Request: I think each interface on the Apex Lynx should have a local management IP address. One on the SFP port, one on the CAT5 port, and one on the RF interface. As an example, many units from Cambium have an address of 169.254.1.1 which is always accessible when directly attached to the ethernet port. I think right now if I was to configure a unit for OOB management via GE1, then if GE1 was damaged I would permanently lose access to the device. If I configure for in band management via fiber, then I could (due to misconfiguration or malfunction) lose access to the device and require a climber to go up and press the reset button to restore access. Feel free to correct me if I have a misconception here, otherwise please consider adding permanent local IP's. ""
Re: [AFMUG] Trango Apex Lynx/Orion feature request
The modem and data ports are on an internal ethernet switch. There's one SVI, aka IBM. I'm sure they could add more SVIs, but it would likely be on a separate VLAN for each interface. Just a wild guess on my part though. You also have the dedicated OMU management port which does have its own IP address. Just remember that you get only one default gateway. I have several ApexPlus links that replaced old unlicensed stuff, so there was only one cable available, which goes into the data port on each side. No management ports are cabled. It sucks, but it is what it is. On 9/6/2016 8:15 PM, Adam Moffett wrote: I just realized I suck at commas. My apologies to grammar nazis. -- Original Message -- From: "Adam Moffett" <dmmoff...@gmail.com <mailto:dmmoff...@gmail.com>> To: "Animal Farm" <af@afmug.com <mailto:af@afmug.com>> Sent: 9/6/2016 9:14:08 PM Subject: [AFMUG] Trango Apex Lynx/Orion feature request I submitted the feature request below to Telrad's online ticketing system earlier today, and they replied that they'll pass the request to engineering. If you use either the Apex Lynx or Apex Orion and if you agree with what I'm saying below then please add your voice to mine and ask for this feature. "" Feature Request: I think each interface on the Apex Lynx should have a local management IP address. One on the SFP port, one on the CAT5 port, and one on the RF interface. As an example, many units from Cambium have an address of 169.254.1.1 which is always accessible when directly attached to the ethernet port. I think right now if I was to configure a unit for OOB management via GE1, then if GE1 was damaged I would permanently lose access to the device. If I configure for in band management via fiber, then I could (due to misconfiguration or malfunction) lose access to the device and require a climber to go up and press the reset button to restore access. Feel free to correct me if I have a misconception here, otherwise please consider adding permanent local IP's. ""
Re: [AFMUG] Trango Apex Lynx/Orion feature request
Telrad or Trango support? Sent from my iPhone > On Sep 6, 2016, at 9:15 PM, Adam Moffett <dmmoff...@gmail.com> wrote: > > I just realized I suck at commas. My apologies to grammar nazis. > > > -- Original Message -- > From: "Adam Moffett" <dmmoff...@gmail.com> > To: "Animal Farm" <af@afmug.com> > Sent: 9/6/2016 9:14:08 PM > Subject: [AFMUG] Trango Apex Lynx/Orion feature request > >> I submitted the feature request below to Telrad's online ticketing system >> earlier today, and they replied that they'll pass the request to >> engineering. If you use either the Apex Lynx or Apex Orion and if you agree >> with what I'm saying below then please add your voice to mine and ask for >> this feature. >> >> "" >> Feature Request: I think each interface on the Apex Lynx should have a local >> management IP address. One on the SFP port, one on the CAT5 port, and one on >> the RF interface. As an example, many units from Cambium have an address of >> 169.254.1.1 which is always accessible when directly attached to the >> ethernet port. >> >> I think right now if I was to configure a unit for OOB management via GE1, >> then if GE1 was damaged I would permanently lose access to the device. If I >> configure for in band management via fiber, then I could (due to >> misconfiguration or malfunction) lose access to the device and require a >> climber to go up and press the reset button to restore access. Feel free to >> correct me if I have a misconception here, otherwise please consider adding >> permanent local IP's. >> "" >>
Re: [AFMUG] Trango Apex Lynx/Orion feature request
I just realized I suck at commas. My apologies to grammar nazis. -- Original Message -- From: "Adam Moffett" <dmmoff...@gmail.com> To: "Animal Farm" <af@afmug.com> Sent: 9/6/2016 9:14:08 PM Subject: [AFMUG] Trango Apex Lynx/Orion feature request I submitted the feature request below to Telrad's online ticketing system earlier today, and they replied that they'll pass the request to engineering. If you use either the Apex Lynx or Apex Orion and if you agree with what I'm saying below then please add your voice to mine and ask for this feature. "" Feature Request: I think each interface on the Apex Lynx should have a local management IP address. One on the SFP port, one on the CAT5 port, and one on the RF interface. As an example, many units from Cambium have an address of 169.254.1.1 which is always accessible when directly attached to the ethernet port. I think right now if I was to configure a unit for OOB management via GE1, then if GE1 was damaged I would permanently lose access to the device. If I configure for in band management via fiber, then I could (due to misconfiguration or malfunction) lose access to the device and require a climber to go up and press the reset button to restore access. Feel free to correct me if I have a misconception here, otherwise please consider adding permanent local IP's. ""
[AFMUG] Trango Apex Lynx/Orion feature request
I submitted the feature request below to Telrad's online ticketing system earlier today, and they replied that they'll pass the request to engineering. If you use either the Apex Lynx or Apex Orion and if you agree with what I'm saying below then please add your voice to mine and ask for this feature. "" Feature Request: I think each interface on the Apex Lynx should have a local management IP address. One on the SFP port, one on the CAT5 port, and one on the RF interface. As an example, many units from Cambium have an address of 169.254.1.1 which is always accessible when directly attached to the ethernet port. I think right now if I was to configure a unit for OOB management via GE1, then if GE1 was damaged I would permanently lose access to the device. If I configure for in band management via fiber, then I could (due to misconfiguration or malfunction) lose access to the device and require a climber to go up and press the reset button to restore access. Feel free to correct me if I have a misconception here, otherwise please consider adding permanent local IP's. ""