Re: [AFMUG] Routed Gigabit Micro Repeater (Mimosa hardware)

[Rob Genovesi]

We use Altech Corp CBI243A:
http://www.alliedelec.com/altech-corp-cbi243a/70236398/

We're in a cool climate and the box is in a shaded area so we haven't
put vent/fans in (yet).  Probably a good idea to do so just to be
safe.


-Rob


On Fri, May 6, 2016 at 5:20 AM, Christopher Gray
 wrote:
> Rob,
>
> What are you using for your charger?
>
>
> 
>
> On Wed, May 4, 2016 at 7:21 PM, Rob Genovesi  wrote:
>>
>> Netonix switches have been great for us.  We're using the DC model
>> with a few batteries for backup.  The Netonix takes 9-60 VDC in and
>> can output 24V or 48V (configurable by port).  Perfect for powering a
>> 24V Mikrotik and a few 48V radios.
>>
>> -Rob
>>
>>
>>
>> On Wed, May 4, 2016 at 3:02 PM, Christopher Gray
>>  wrote:
>> > For my routed 100 Mbps micro repeater sites I've been running MikroTik
>> > RB750P routers for both routing traffic and powering radios (With good
>> > results).
>> >
>> > I want to setup my first small routed 1 Gbps repeater site using 2x B5
>> > backhaul links and 1x A5 PtMP. What are others using to run a small
>> > routed
>> > site that runs 48V Gigabit radios?
>> >
>> > I'm considering a RB750G with a Netonix WS-6-MINI, but using a Netonix
>> > as a
>> > power injector seems a little overkill.
>
>

Re: [AFMUG] Routed Gigabit Micro Repeater (Mimosa hardware)

[Christopher Gray]

Rob,

What are you using for your charger?


--

On Wed, May 4, 2016 at 7:21 PM, Rob Genovesi  wrote:

> Netonix switches have been great for us.  We're using the DC model
> with a few batteries for backup.  The Netonix takes 9-60 VDC in and
> can output 24V or 48V (configurable by port).  Perfect for powering a
> 24V Mikrotik and a few 48V radios.
>
> -Rob
>
>
>
> On Wed, May 4, 2016 at 3:02 PM, Christopher Gray
>  wrote:
> > For my routed 100 Mbps micro repeater sites I've been running MikroTik
> > RB750P routers for both routing traffic and powering radios (With good
> > results).
> >
> > I want to setup my first small routed 1 Gbps repeater site using 2x B5
> > backhaul links and 1x A5 PtMP. What are others using to run a small
> routed
> > site that runs 48V Gigabit radios?
> >
> > I'm considering a RB750G with a Netonix WS-6-MINI, but using a Netonix
> as a
> > power injector seems a little overkill.
>

Re: [AFMUG] Routed Gigabit Micro Repeater (Mimosa hardware)

[Scott Vander Dussen]

No ventilation for that enclosure?  Those Netonix are only rated for +55C*

-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Rob Genovesi
Sent: Thursday, May 5, 2016 01:22
To: af@afmug.com
Subject: Re: [AFMUG] Routed Gigabit Micro Repeater (Mimosa hardware)

Netonix switches have been great for us.  We're using the DC model with a few 
batteries for backup.  The Netonix takes 9-60 VDC in and can output 24V or 48V 
(configurable by port).  Perfect for powering a 24V Mikrotik and a few 48V 
radios.

-Rob



On Wed, May 4, 2016 at 3:02 PM, Christopher Gray <cg...@graytechsoftware.com> 
wrote:
> For my routed 100 Mbps micro repeater sites I've been running MikroTik 
> RB750P routers for both routing traffic and powering radios (With good 
> results).
>
> I want to setup my first small routed 1 Gbps repeater site using 2x B5 
> backhaul links and 1x A5 PtMP. What are others using to run a small 
> routed site that runs 48V Gigabit radios?
>
> I'm considering a RB750G with a Netonix WS-6-MINI, but using a Netonix 
> as a power injector seems a little overkill.

Re: [AFMUG] Routed Gigabit Micro Repeater (Mimosa hardware)

[Mathew Howard]

The new Edgepoints could do the job too.
On May 5, 2016 1:40 PM, "Josh Reynolds"  wrote:

> Just make sure it has a 48v power supply, or get one for it. I can't
> remember if they changed that after the first few packaging runs or
> not, but originally they only came with 24v power supplies (thus no
> optional 48v output).
>
> On Thu, May 5, 2016 at 1:09 PM, Christopher Gray
>  wrote:
> > Any reason to avoid the EdgeRouter PoE? After some further checking, it
> > seems like that unit would do both the routing and PoE for a lower cost
> > taking up less space (than a MikroTik combined with Netonix).
> >
> > I also found the Tycon Mid-span 4-port injector at a very reasonable
> price,
> > but the cost of just one manual reboot would make up for the purchase of
> a
> > Netonix or EdgeRouter PoE.
> >
> >
> > 
> >
> > On Wed, May 4, 2016 at 7:59 PM, Mathew Howard 
> wrote:
> >>
> >> Packetflux...
> >>
> >> On Wed, May 4, 2016 at 6:21 PM, Rob Genovesi 
> >> wrote:
> >>>
> >>> Netonix switches have been great for us.  We're using the DC model
> >>> with a few batteries for backup.  The Netonix takes 9-60 VDC in and
> >>> can output 24V or 48V (configurable by port).  Perfect for powering a
> >>> 24V Mikrotik and a few 48V radios.
> >>>
> >>> -Rob
> >>>
> >>>
> >>>
> >>> On Wed, May 4, 2016 at 3:02 PM, Christopher Gray
> >>>  wrote:
> >>> > For my routed 100 Mbps micro repeater sites I've been running
> MikroTik
> >>> > RB750P routers for both routing traffic and powering radios (With
> good
> >>> > results).
> >>> >
> >>> > I want to setup my first small routed 1 Gbps repeater site using 2x
> B5
> >>> > backhaul links and 1x A5 PtMP. What are others using to run a small
> >>> > routed
> >>> > site that runs 48V Gigabit radios?
> >>> >
> >>> > I'm considering a RB750G with a Netonix WS-6-MINI, but using a
> Netonix
> >>> > as a
> >>> > power injector seems a little overkill.
> >>
> >>
> >
>

Re: [AFMUG] Routed Gigabit Micro Repeater (Mimosa hardware)

[Josh Reynolds]

Just make sure it has a 48v power supply, or get one for it. I can't
remember if they changed that after the first few packaging runs or
not, but originally they only came with 24v power supplies (thus no
optional 48v output).

On Thu, May 5, 2016 at 1:09 PM, Christopher Gray
 wrote:
> Any reason to avoid the EdgeRouter PoE? After some further checking, it
> seems like that unit would do both the routing and PoE for a lower cost
> taking up less space (than a MikroTik combined with Netonix).
>
> I also found the Tycon Mid-span 4-port injector at a very reasonable price,
> but the cost of just one manual reboot would make up for the purchase of a
> Netonix or EdgeRouter PoE.
>
>
> 
>
> On Wed, May 4, 2016 at 7:59 PM, Mathew Howard  wrote:
>>
>> Packetflux...
>>
>> On Wed, May 4, 2016 at 6:21 PM, Rob Genovesi 
>> wrote:
>>>
>>> Netonix switches have been great for us.  We're using the DC model
>>> with a few batteries for backup.  The Netonix takes 9-60 VDC in and
>>> can output 24V or 48V (configurable by port).  Perfect for powering a
>>> 24V Mikrotik and a few 48V radios.
>>>
>>> -Rob
>>>
>>>
>>>
>>> On Wed, May 4, 2016 at 3:02 PM, Christopher Gray
>>>  wrote:
>>> > For my routed 100 Mbps micro repeater sites I've been running MikroTik
>>> > RB750P routers for both routing traffic and powering radios (With good
>>> > results).
>>> >
>>> > I want to setup my first small routed 1 Gbps repeater site using 2x B5
>>> > backhaul links and 1x A5 PtMP. What are others using to run a small
>>> > routed
>>> > site that runs 48V Gigabit radios?
>>> >
>>> > I'm considering a RB750G with a Netonix WS-6-MINI, but using a Netonix
>>> > as a
>>> > power injector seems a little overkill.
>>
>>
>

Re: [AFMUG] Routed Gigabit Micro Repeater (Mimosa hardware)

[Christopher Gray]

Any reason to avoid the EdgeRouter PoE? After some further checking, it
seems like that unit would do both the routing and PoE for a lower cost
taking up less space (than a MikroTik combined with Netonix).

I also found the Tycon Mid-span 4-port injector at a very reasonable price,
but the cost of just one manual reboot would make up for the purchase of a
Netonix or EdgeRouter PoE.


--

On Wed, May 4, 2016 at 7:59 PM, Mathew Howard  wrote:

> Packetflux...
>
> On Wed, May 4, 2016 at 6:21 PM, Rob Genovesi 
> wrote:
>
>> Netonix switches have been great for us.  We're using the DC model
>> with a few batteries for backup.  The Netonix takes 9-60 VDC in and
>> can output 24V or 48V (configurable by port).  Perfect for powering a
>> 24V Mikrotik and a few 48V radios.
>>
>> -Rob
>>
>>
>>
>> On Wed, May 4, 2016 at 3:02 PM, Christopher Gray
>>  wrote:
>> > For my routed 100 Mbps micro repeater sites I've been running MikroTik
>> > RB750P routers for both routing traffic and powering radios (With good
>> > results).
>> >
>> > I want to setup my first small routed 1 Gbps repeater site using 2x B5
>> > backhaul links and 1x A5 PtMP. What are others using to run a small
>> routed
>> > site that runs 48V Gigabit radios?
>> >
>> > I'm considering a RB750G with a Netonix WS-6-MINI, but using a Netonix
>> as a
>> > power injector seems a little overkill.
>>
>
>

Re: [AFMUG] Routed Gigabit Micro Repeater (Mimosa hardware)

[Mathew Howard]

Packetflux...

On Wed, May 4, 2016 at 6:21 PM, Rob Genovesi  wrote:

> Netonix switches have been great for us.  We're using the DC model
> with a few batteries for backup.  The Netonix takes 9-60 VDC in and
> can output 24V or 48V (configurable by port).  Perfect for powering a
> 24V Mikrotik and a few 48V radios.
>
> -Rob
>
>
>
> On Wed, May 4, 2016 at 3:02 PM, Christopher Gray
>  wrote:
> > For my routed 100 Mbps micro repeater sites I've been running MikroTik
> > RB750P routers for both routing traffic and powering radios (With good
> > results).
> >
> > I want to setup my first small routed 1 Gbps repeater site using 2x B5
> > backhaul links and 1x A5 PtMP. What are others using to run a small
> routed
> > site that runs 48V Gigabit radios?
> >
> > I'm considering a RB750G with a Netonix WS-6-MINI, but using a Netonix
> as a
> > power injector seems a little overkill.
>

Re: [AFMUG] Routed Gigabit Micro Repeater (Mimosa hardware)

[Rob Genovesi]

Netonix switches have been great for us.  We're using the DC model
with a few batteries for backup.  The Netonix takes 9-60 VDC in and
can output 24V or 48V (configurable by port).  Perfect for powering a
24V Mikrotik and a few 48V radios.

-Rob



On Wed, May 4, 2016 at 3:02 PM, Christopher Gray
 wrote:
> For my routed 100 Mbps micro repeater sites I've been running MikroTik
> RB750P routers for both routing traffic and powering radios (With good
> results).
>
> I want to setup my first small routed 1 Gbps repeater site using 2x B5
> backhaul links and 1x A5 PtMP. What are others using to run a small routed
> site that runs 48V Gigabit radios?
>
> I'm considering a RB750G with a Netonix WS-6-MINI, but using a Netonix as a
> power injector seems a little overkill.

Re: [AFMUG] Routed Gigabit Micro Repeater (Mimosa hardware)

[Josh Reynolds]

Netonix

On Wed, May 4, 2016 at 5:02 PM, Christopher Gray
 wrote:
> For my routed 100 Mbps micro repeater sites I've been running MikroTik
> RB750P routers for both routing traffic and powering radios (With good
> results).
>
> I want to setup my first small routed 1 Gbps repeater site using 2x B5
> backhaul links and 1x A5 PtMP. What are others using to run a small routed
> site that runs 48V Gigabit radios?
>
> I'm considering a RB750G with a Netonix WS-6-MINI, but using a Netonix as a
> power injector seems a little overkill.