[sw-issues] [Issue 27878] page width 640mm forces short header left-aligned
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=27878 --- Additional comments from openma...@openoffice.org Sun Mar 22 07:16:46 + 2009 --- This is still a problem in writer 3.0. The work around mentioned using Draw won't work if you need to use mailmerge. This problem also occurs in frames. You can make the frame expand and you won't have the problem on the first line. But if you go into two lines when the frame expands the second line will be left justified and the first line centered (if the second line leaves the 22.8 combined left and right spacing. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 19976] annoying raise behavior .. .
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=19976 User pl changed the following: What|Old value |New value Status|REOPENED |RESOLVED Resolution| |FIXED --- Additional comments from p...@openoffice.org Sun Mar 22 08:36:51 + 2009 --- because a) it was integrated two and a half years ago in SRC680m192 b) the patched code doesn't even exist anymore - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 19976] annoying raise behavior .. .
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=19976 User pl changed the following: What|Old value |New value Status|RESOLVED |CLOSED --- Additional comments from p...@openoffice.org Sun Mar 22 08:37:12 + 2009 --- closing - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 100457] unordered list rendered d ifferently in 2.4 and 3.0
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100457 Issue #|100457 Summary|unordered list rendered differently in 2.4 and 3.0 Component|Word processor Version|OOO300m4 Platform|Unknown URL| OS/Version|All Status|UNCONFIRMED Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|configuration Assigned to|writerneedsconfirm Reported by|donpaolo --- Additional comments from donpa...@openoffice.org Sun Mar 22 09:36:59 + 2009 --- I have an unordered list, and I see that Oo.o 2.4 e Oo.o 3.0 (dev300m41 build 9383) render it differently. See attacched document: In 2.4 the text of the list item is closed to the bullet, while in 3.0 its aside. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 100457] unordered list rendered d ifferently in 2.4 and 3.0
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100457 --- Additional comments from donpa...@openoffice.org Sun Mar 22 09:37:58 + 2009 --- Created an attachment (id=61095) List rendered differently in 2.4 and in 3.0 - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 100458] Crash when using Tools-B ibliography Database
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100458 Issue #|100458 Summary|Crash when using Tools-Bibliography Database Component|Word processor Version|OOO310m6 Platform|Other URL| OS/Version|other Status|UNCONFIRMED Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|ui Assigned to|writerneedsconfirm Reported by|arek_c --- Additional comments from are...@openoffice.org Sun Mar 22 09:49:21 + 2009 --- Writer crashes when I select from menu Tools-Bibliography Database. Verified on Windows 7 build 7057/OpenOffice 3.1 m6 build 9391 - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sc-issues] [Issue 100455] Performing math on a cell that contains a formula fails.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100455 User rainerbielefeld changed the following: What|Old value |New value CC|''|'rainerbielefeld' Status|UNCONFIRMED |RESOLVED Keywords| |oooqa Resolution| |INVALID Subcomponent|programming |code --- Additional comments from rainerbielef...@openoffice.org Sun Mar 22 10:03:44 + 2009 --- The subject of the report is definitively not true, so INVALID. For details pls. see attached sample.ods. Using CURRENT(B2) returns Err.508 is unexpected for me, might be a subject for an other new issue. @jmodzel: It would save much time for you and us if you would attach sample files instead typing the contents of your sample files here - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sc.openoffice.org For additional commands, e-mail: issues-h...@sc.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sc-issues] [Issue 100455] Performing math on a cell that contains a formula fails.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100455 --- Additional comments from rainerbielef...@openoffice.org Sun Mar 22 10:06:48 + 2009 --- Created an attachment (id=61096) sample file - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sc.openoffice.org For additional commands, e-mail: issues-h...@sc.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 100459] Character style dialog op ens in wrong tab
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100459 Issue #|100459 Summary|Character style dialog opens in wrong tab Component|framework Version|OOO310m6 Platform|PC URL| OS/Version|All Status|UNCONFIRMED Status whiteboard| Keywords| Resolution| Issue type|ENHANCEMENT Priority|P3 Subcomponent|ui Assigned to|tm Reported by|lodahl --- Additional comments from lod...@openoffice.org Sun Mar 22 10:13:30 + 2009 --- Normally when you open the Character style dialog the dialog will open in the last used tab. This is ok in most cases. But if you use the language selector in the status bar (click and select 'more...') you should always open the Font tab in that same dialog. In this particular case anything else will confuse the user. User experience ;-) Best regards, Leif Lodahl - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sc-issues] [Issue 59112] Off-by-one calculation int () and floor() with large inputs
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=59112 --- Additional comments from volke...@openoffice.org Sun Mar 22 10:16:31 + 2009 --- I checked the given numbers with OOO310m5 and the results are correct. Can someone please crosscheck with a DEV300-build? - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sc.openoffice.org For additional commands, e-mail: issues-h...@sc.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[porting-issues] [Issue 100460] MinGW port fix for sal wh en debug=true
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100460 Issue #|100460 Summary|MinGW port fix for sal when debug=true Component|porting Version|DEV300m44 Platform|PC URL| OS/Version|Windows, all Status|UNCONFIRMED Status whiteboard| Keywords| Resolution| Issue type|PATCH Priority|P3 Subcomponent|code Assigned to|tono Reported by|tono --- Additional comments from t...@openoffice.org Sun Mar 22 10:24:04 + 2009 --- sal/osl/w32/file.cxx contains some debug statements needing fixes of unicode string handling. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@porting.openoffice.org For additional commands, e-mail: issues-h...@porting.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[porting-issues] [Issue 100460] MinGW port fix for sal wh en debug=true
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100460 User tono changed the following: What|Old value |New value Attachment is patch| |Created an attachment (id= | |61097) Patch for sal --- Additional comments from t...@openoffice.org Sun Mar 22 10:26:06 + 2009 --- Created an attachment (id=61097) Patch for sal - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@porting.openoffice.org For additional commands, e-mail: issues-h...@porting.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[porting-issues] [Issue 100460] MinGW port fix for sal wh en debug=true
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100460 User tono changed the following: What|Old value |New value Ever confirmed| |1 Status|UNCONFIRMED |STARTED Target milestone|--- |OOo 3.2 --- Additional comments from t...@openoffice.org Sun Mar 22 10:27:18 + 2009 --- Starting ... - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@porting.openoffice.org For additional commands, e-mail: issues-h...@porting.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[porting-issues] [Issue 100461] MinGW port fix for store/ workben
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100461 Issue #|100461 Summary|MinGW port fix for store/workben Component|porting Version|DEV300m44 Platform|PC URL| OS/Version|Windows, all Status|UNCONFIRMED Status whiteboard| Keywords| Resolution| Issue type|PATCH Priority|P3 Subcomponent|code Assigned to|tono Reported by|tono --- Additional comments from t...@openoffice.org Sun Mar 22 10:32:07 + 2009 --- Althogh store/workben is skipped in normal build, I would like to make it buildable. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@porting.openoffice.org For additional commands, e-mail: issues-h...@porting.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[porting-issues] [Issue 100461] MinGW port fix for store/ workben
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100461 User tono changed the following: What|Old value |New value Attachment is patch| |Created an attachment (id= | |61098) A patch for the mak | |efile.mk --- Additional comments from t...@openoffice.org Sun Mar 22 10:40:47 + 2009 --- Created an attachment (id=61098) A patch for the makefile.mk - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@porting.openoffice.org For additional commands, e-mail: issues-h...@porting.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[porting-issues] [Issue 100461] MinGW port fix for store/ workben
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100461 User tono changed the following: What|Old value |New value Ever confirmed| |1 Status|UNCONFIRMED |STARTED Target milestone|--- |OOo 3.2 --- Additional comments from t...@openoffice.org Sun Mar 22 10:46:55 + 2009 --- Starting ... - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@porting.openoffice.org For additional commands, e-mail: issues-h...@porting.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[porting-issues] [Issue 100462] MinGW port update for pyt hon
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100462 User tono changed the following: What|Old value |New value Attachment is patch| |Created an attachment (id= | |61099) A patch to fix the | |typo --- Additional comments from t...@openoffice.org Sun Mar 22 10:51:59 + 2009 --- Created an attachment (id=61099) A patch to fix the typo - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@porting.openoffice.org For additional commands, e-mail: issues-h...@porting.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[porting-issues] [Issue 100462] MinGW port update for pyt hon
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100462 User tono changed the following: What|Old value |New value Ever confirmed| |1 Status|UNCONFIRMED |STARTED Target milestone|--- |OOo 3.2 --- Additional comments from t...@openoffice.org Sun Mar 22 10:56:21 + 2009 --- Starting ... - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@porting.openoffice.org For additional commands, e-mail: issues-h...@porting.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[porting-issues] [Issue 100463] MinGW port header patch e nhancement
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100463 Issue #|100463 Summary|MinGW port header patch enhancement Component|porting Version|DEV300m44 Platform|PC URL| OS/Version|Windows, all Status|UNCONFIRMED Status whiteboard| Keywords| Resolution| Issue type|ENHANCEMENT Priority|P3 Subcomponent|code Assigned to|tono Reported by|tono --- Additional comments from t...@openoffice.org Sun Mar 22 11:00:45 + 2009 --- Some Microsoft headers are using '__inline' keywords. I have been replacing them with 'inline' when in C++ and with 'static' in C. They should be replaced with 'static __incline__' when in C. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@porting.openoffice.org For additional commands, e-mail: issues-h...@porting.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[porting-issues] [Issue 100463] MinGW port header patch e nhancement
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100463 User tono changed the following: What|Old value |New value Attachment is patch| |Created an attachment (id= | |61100) A patch for the enh | |ancement --- Additional comments from t...@openoffice.org Sun Mar 22 11:01:44 + 2009 --- Created an attachment (id=61100) A patch for the enhancement - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@porting.openoffice.org For additional commands, e-mail: issues-h...@porting.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[porting-issues] [Issue 100463] MinGW port header patch e nhancement
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100463 User tono changed the following: What|Old value |New value Ever confirmed| |1 Status|UNCONFIRMED |STARTED Issue type|ENHANCEMENT |PATCH Target milestone|--- |OOo 3.2 --- Additional comments from t...@openoffice.org Sun Mar 22 11:04:09 + 2009 --- Starting ... - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@porting.openoffice.org For additional commands, e-mail: issues-h...@porting.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[porting-issues] [Issue 100462] MinGW port update for pyt hon
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100462 Issue #|100462 Summary|MinGW port update for python Component|porting Version|DEV300m44 Platform|PC URL| OS/Version|Windows, all Status|UNCONFIRMED Status whiteboard| Keywords| Resolution| Issue type|PATCH Priority|P3 Subcomponent|code Assigned to|tono Reported by|tono --- Additional comments from t...@openoffice.org Sun Mar 22 10:49:54 + 2009 --- I have found a typo in python port. It is not breaking the build but better to be fixed. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@porting.openoffice.org For additional commands, e-mail: issues-h...@porting.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 100456] note date always 'Today' when exported to doc format
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100456 User es changed the following: What|Old value |New value Assigned to|writerneedsconfirm|mod Target milestone|--- |OOo 3.2 --- Additional comments from e...@openoffice.org Sun Mar 22 11:44:07 + 2009 --- Also reproduced from scratch in OOO310m6 - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 100430] OOo does not add the tabl e column for the saved file
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100430 User es changed the following: What|Old value |New value Assigned to|writerneedsconfirm|od Target milestone|--- |OOo Later --- Additional comments from e...@openoffice.org Sun Mar 22 11:54:08 + 2009 --- @OD: please have a look. It do0esn't happen when the document has been first exported to ODT. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 91872] current timestamp of notes instead of timestamp when they were created
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=91872 --- Additional comments from m...@openoffice.org Sun Mar 22 11:54:40 + 2009 --- *** Issue 100456 has been marked as a duplicate of this issue. *** - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 100456] note date always 'Today' when exported to doc format
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100456 User mod changed the following: What|Old value |New value Status|NEW |RESOLVED Resolution| |DUPLICATE --- Additional comments from m...@openoffice.org Sun Mar 22 11:54:43 + 2009 --- mod-es: sure it didn't work in m6? This is indeed an issue for 3.0/3.0.1, but is fixed in 3.1. We didn't export a date and were not be able to import dates, this is both fixed now. Opening the attached document with a 3.1 version should show (no date), as there is no date saved in the file. *** This issue has been marked as a duplicate of 91872 *** - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 100456] note date always 'Today' when exported to doc format
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100456 User mod changed the following: What|Old value |New value Status|RESOLVED |CLOSED --- Additional comments from m...@openoffice.org Sun Mar 22 11:55:57 + 2009 --- closing - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 100464] Two new symbols needed fo r Formulas
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100464 Issue #|100464 Summary|Two new symbols needed for Formulas Component|Formula editor Version|OOo 3.0.1 Platform|All URL| OS/Version|All Status|UNCONFIRMED Status whiteboard| Keywords| Resolution| Issue type|ENHANCEMENT Priority|P3 Subcomponent|ui Assigned to|mru Reported by|diaz_frederic --- Additional comments from diaz_frede...@openoffice.org Sun Mar 22 12:35:52 + 2009 --- In www.educoo.org educational meetings, many mathematics teachers told us they needed two additional symbols in formulas First is the widearc symbol over two or more letters Second is the arrow with a heel, used in the expression x |--- f(x) For the moment, two temporary solutions have been found - creating a draw object imitating these symbols - installing Ams TeX fonts (for one or two symbol only...) Would it be possible to integrate those two symbols directly in OpenSymbol font, for example in unused areas to make them directly usable in OOoMath ? fred juan diaz - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 93517] Menu File/Send does not wo rk
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=93517 --- Additional comments from frieder2...@openoffice.org Sun Mar 22 12:40:48 + 2009 --- I am testing the ooo-dev310m7 and the „File → Send → Document as E-mail Option still does not work properly even when no spaces or other strange characters are in the file-name. When executed, now the Main-Window of Mail comes up but not the required „New E-mail“ Window of Apple Mail. This might seem a progress compared to older versions in september last year when nothing happened at all. But it is still useless to sending an e-mail with the attached document-file, because you still have to resort to choose the new e-mail-Option manually and attach the file manually as well. In a nutshell: It seems that the File-Send-Option executes the wrong command Regards Frieder - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 100464] Two new symbols needed fo r Formulas
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100464 --- Additional comments from diaz_frede...@openoffice.org Sun Mar 22 12:42:48 + 2009 --- Created an attachment (id=61101) Image showing the two needed symbols - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 100465] word chrashes when drag-d rop more than one picture
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100465 Issue #|100465 Summary|word chrashes when drag-drop more than one picture Component|Word processor Version|OOO300m1 Platform|PC URL| OS/Version|Linux Status|UNCONFIRMED Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P2 Subcomponent|editing Assigned to|writerneedsconfirm Reported by|nospam12 --- Additional comments from nospa...@openoffice.org Sun Mar 22 13:05:14 + 2009 --- There is a reproducible bug in OOO 3.0.1 (x86 Linux) OOO300m15(Build;9379) Build 3.0.1.3 which I have reduced to the following steps: 1. Use or create an OO word Document e.g.test.odt 2. copy 2 or more pictures STRG-C (test.jpg) outside OO to the clipboard 3. paste the pictures to the document with STRG-V = OO Word crashes reproduceable every time I do this When I copy and paste only 1 picture there is no crash. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 100465] word crashes when drag-dr op more than one picture
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100465 User nospam12 changed the following: What|Old value |New value Summary|word chrashes when drag-dr|word crashes when drag-dro |op more than one picture |p more than one picture - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sc-issues] [Issue 100455] Performing math on a cell that contains a formula fails.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100455 User regina changed the following: What|Old value |New value CC|'rainerbielefeld' |'rainerbielefeld,regina' Status|RESOLVED |CLOSED --- Additional comments from reg...@openoffice.org Sun Mar 22 13:16:47 + 2009 --- CURRENT is a function with an empty parameter list. It must be CURRENT(). [Other functions with empty parameter list are PI(), TRUE(), FALSE()]. Therefore you get an error in bracketing. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sc.openoffice.org For additional commands, e-mail: issues-h...@sc.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sc-issues] [Issue 59112] Off-by-one calculation int () and floor() with large inputs
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=59112 --- Additional comments from reg...@openoffice.org Sun Mar 22 13:19:25 + 2009 --- I have tested it with an OOoDEV300m42 on WinXP. There the results are correct too. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sc.openoffice.org For additional commands, e-mail: issues-h...@sc.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sc-issues] [Issue 100455] Performing math on a cell that contains a formula fails.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100455 --- Additional comments from to...@openoffice.org Sun Mar 22 13:54:44 + 2009 --- jmodzel: Your formulas in the first row return the correct value, because Left returns a string and N treats strings as 0. Using Value instead of N will give you the results you are looking for. TomW - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sc.openoffice.org For additional commands, e-mail: issues-h...@sc.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 100466] Recording changes (Show=o ff) deleting a char in lines below the firts r emove style from the first line
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100466 Issue #|100466 Summary|Recording changes (Show=off) deleting a char in lines |below the firts remove style from the first line Component|Word processor Version|OOo 3.0.1 Platform|All URL| OS/Version|Linux Status|UNCONFIRMED Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P2 Subcomponent|code Assigned to|writerneedsconfirm Reported by|stefano77 --- Additional comments from stefan...@openoffice.org Sun Mar 22 14:24:17 + 2009 --- Working on a document (attached) with Record Changes=ON and Show Changes=OFF I encountered a strange behaviour: every deletion done in lines below the first remove the style from the first line. This problem was not present in OOO 2.4.1. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 100466] Recording changes (Show=o ff) deleting a char in lines below the firts r emove style from the first line
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100466 --- Additional comments from stefan...@openoffice.org Sun Mar 22 14:27:08 + 2009 --- Created an attachment (id=61102) this is the document showing the problem described in the issue - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 100465] WRITER crashes when drag- drop more than one picture
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100465 User rainerbielefeld changed the following: What|Old value |New value CC|''|'rainerbielefeld' Ever confirmed| |1 Status|UNCONFIRMED |NEW Keywords| |oooqa Summary|word crashes when drag-dro|WRITER crashes when drag-d |p more than one picture |rop more than one picture --- Additional comments from rainerbielef...@openoffice.org Sun Mar 22 15:31:03 + 2009 --- I checked with Ooo 3.0.1 (DE) Multilingual version GERMAN UI WIN XP: [OOO300m15 (Build 9379)] and can confirm the reported crash. Steps to reproduce: 1. open new WRITER document 2. Change to WIN explorer and select a folder with at least 2 .png images 3. click 1 .png in WIN EXPLORER 5. cntrl+c 6. change to WRITER document 7. cntrl+v expected: image should be inserted actual: as expected 8. redo from 3. but select 2 or more .png images expected: image should be inserted (as it works in DRAW) actual: crash - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sc-issues] [Issue 90569] copy-pasting a column or r ow freezes Calc
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=90569 User nickd changed the following: What|Old value |New value Summary|copy-pasting a column or r|copy-pasting a column or r |ow makes freezes Calc |ow freezes Calc - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sc.openoffice.org For additional commands, e-mail: issues-h...@sc.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sc-issues] [Issue 90569] copy-pasting a column or r ow freezes Calc
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=90569 User nickd changed the following: What|Old value |New value Version|OOo 2.4.1 |OOo 3.0 --- Additional comments from ni...@openoffice.org Sun Mar 22 16:55:14 + 2009 --- Just installed 3.0 (sorry, I'm a late adopter) and noticed this bug is still there - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sc.openoffice.org For additional commands, e-mail: issues-h...@sc.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[util-issues] [Issue 100223] GCC warnings: suggest a s pace before '; ' or explicit braces around emp ty body in 'for' statement
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100223 User erack changed the following: What|Old value |New value Attachment is patch| |Created an attachment (id= | |61103) More of these when | |doing a m43 non-product bu | |ild with gcc 4.3.2 --- Additional comments from er...@openoffice.org Sun Mar 22 17:15:12 + 2009 --- Created an attachment (id=61103) More of these when doing a m43 non-product build with gcc 4.3.2 - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@util.openoffice.org For additional commands, e-mail: issues-h...@util.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[util-issues] [Issue 100223] GCC warnings: suggest a s pace before '; ' or explicit braces around emp ty body in 'for' statement
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100223 User erack changed the following: What|Old value |New value CC|'cmc,pmladek' |'cmc,er,pmladek' - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@util.openoffice.org For additional commands, e-mail: issues-h...@util.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[util-issues] [Issue 100223] GCC warnings: suggest a s pace before '; ' or explicit braces around emp ty body in 'for' statement
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100223 User erack changed the following: What|Old value |New value CC|'cmc,er,pmladek' |'cmc,erack,pmladek' - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@util.openoffice.org For additional commands, e-mail: issues-h...@util.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 88714] Find Replace: keep the More Options dialog open when item is selecte d
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=88714 User mod changed the following: What|Old value |New value Ever confirmed| |1 Status|UNCONFIRMED |NEW --- Additional comments from m...@openoffice.org Sun Mar 22 18:14:33 + 2009 --- assigned to requirements - New - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 91001] Side-by-side view with syn chronous scrolling
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=91001 User mod changed the following: What|Old value |New value Ever confirmed| |1 Status|UNCONFIRMED |NEW --- Additional comments from m...@openoffice.org Sun Mar 22 18:15:29 + 2009 --- . - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[www-issues] [Issue 932] Table border style
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=932 --- Additional comments from m...@openoffice.org Sun Mar 22 18:19:57 + 2009 --- Not necessarily. We don't need to wait with an implementation until the standard is done, it's enough to have it specified and scheduled for the next ODF release. So it happened for most of the 1.2 features. We are very interested in working on borders to improve the interoperability, but currently performance has a higher priority. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@openoffice.org For additional commands, e-mail: issues-h...@openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 40116] Default font size problem
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=40116 --- Additional comments from wanderw...@openoffice.org Sun Mar 22 19:18:01 + 2009 --- Your font size is so small it is almost impossible to read your website. My eyes can't take it even when I have my glasses on. Please advise if there is any way that I can increase the font size while looking at your website. Thank you. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 100464] Two new symbols needed fo r Formulas
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100464 User vincentooo changed the following: What|Old value |New value Status|UNCONFIRMED |NEW Ever confirmed| |1 --- Additional comments from vincent...@openoffice.org Sun Mar 22 20:28:34 + 2009 --- *** Issue 100464 has been confirmed by votes. *** - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sc-issues] [Issue 97091] move functions ERF and ERF C to ::rtl::math namespace
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=97091 --- Additional comments from reg...@openoffice.org Sun Mar 22 21:17:15 + 2009 --- Created an attachment (id=61104) patch now based on odff06, move erf and erfc from scaddins to sal - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sc.openoffice.org For additional commands, e-mail: issues-h...@sc.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sc-issues] [Issue 97091] move functions ERF and ERF C to ::rtl::math namespace
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=97091 --- Additional comments from reg...@openoffice.org Sun Mar 22 21:18:20 + 2009 --- Created an attachment (id=61105) patch now based on odff06, move erf and erfc from scaddins to sal - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sc.openoffice.org For additional commands, e-mail: issues-h...@sc.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[dba-issues] [Issue 100467] changes in standard value s of the table do not get saved
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100467 Issue #|100467 Summary|changes in standard values of the table do not get sav |ed Component|Database access Version|OOO310m7 Platform|PC URL| OS/Version|Windows XP Status|UNCONFIRMED Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|none Assigned to|dbaneedsconfirm Reported by|ud --- Additional comments from u...@openoffice.org Sun Mar 22 22:46:40 + 2009 --- I created an table in HSQLDB with integer fields. I set default values. Later i want to change the default value by using the edit tables menu. But the changes do not get saved. I want to create an example but there were a lot of different results so i do not get the one working way. Please play a little bit like: change default values, save, close table, refresh tables, edit tables again. Important is to click the view/Refresh tables button. -Please notice, this example was build with OOO310m7 -Open attached Database -right click to open the table Example -go to row ONE and change default value from 1 to 10 -save table by clicking -go to row TWO and change default value from 3 to 20 -save table by clicking = You can see that the default value is lost in field ONE -close table -click on view/Refresh tables -edit table Example again = In my example the default values always go back to previous values after doing this = If i rename the column sometimes i get the default value for the row saved. = Once i couldn't get any default values in 310m7 any more, but after opening the same file in OOo3.0.1 the default values from before where back again, also in OOO310m7. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@dba.openoffice.org For additional commands, e-mail: issues-h...@dba.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[dba-issues] [Issue 100467] changes in standard value s of the table do not get saved
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100467 --- Additional comments from u...@openoffice.org Sun Mar 22 22:48:32 + 2009 --- Created an attachment (id=61106) Example - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@dba.openoffice.org For additional commands, e-mail: issues-h...@dba.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[porting-issues] [Issue 100468] PowerPC OpenJDK path wron g.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100468 Issue #|100468 Summary|PowerPC OpenJDK path wrong. Component|porting Version|OOO310m6 Platform|PowerPC URL| OS/Version|Linux Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|code Assigned to|hr Reported by|rene --- Additional comments from r...@openoffice.org Sun Mar 22 23:58:18 + 2009 --- ... must be server and not client. Was once done, but somehow regressed. causes e.g. http://experimental.debian.net/fetch.php?pkg=openoffice.orgver=1%3A3.1.0~ooo310m6-1arch=powerpcstamp=1237764451file=logas=raw: Making: ../../unxlngppc.pro/lib/libofficebean.so powerpc-linux-gnu-g++ -Wl,-rpath,'$ORIGIN:$ORIGIN/../ure-link/lib' -shared -L../../unxlngppc.pro/lib -L../lib -L/build/buildd/openoffice.org-3.1.0~ooo310m6/ooo-build/build/ooo310-m6/solenv/unxlngppc/lib -L/build/buildd/openoffice.org-3.1.0~ooo310m6/ooo-build/build/ooo310-m6/solver/310/unxlngppc.pro/lib -L/build/buildd/openoffice.org-3.1.0~ooo310m6/ooo-build/build/ooo310-m6/solenv/unxlngppc/lib -L/usr/lib/jvm/java-6-openjdk/lib -L/usr/lib/jvm/java-6-openjdk/jre/lib/ppc -L/usr/lib/jvm/java-6-openjdk/jre/lib/ppc/client -L/usr/lib/jvm/java-6-openjdk/jre/lib/ppc/native_threads -L/usr/lib -L/usr/lib/iceape ../../unxlngppc.pro/slo/officebean_version.o -o ../../unxlngppc.pro/lib/libofficebean.so ../../unxlngppc.pro/slo/com_sun_star_comp_beans_LocalOfficeWindow.o ../../unxlngppc.pro/slo/com_sun_star_beans_LocalOfficeWindow.o -ljawt -lstdc++ -ldl -lpthread -lm rm -f ../../unxlngppc.pro/lib/check_libofficebean.so mv ../../unxlngppc.pro/lib/libofficebean.so ../../unxlngppc.pro/lib/check_libofficebean.so /build/buildd/openoffice.org-3.1.0~ooo310m6/ooo-build/build/ooo310-m6/solenv/bin/checkdll.sh -L../../unxlngppc.pro/lib -L/build/buildd/openoffice.org-3.1.0~ooo310m6/ooo-build/build/ooo310-m6/solver/310/unxlngppc.pro/lib ../../unxlngppc.pro/lib/check_libofficebean.so Checking DLL ../../unxlngppc.pro/lib/check_libofficebean.so ...: ERROR: /usr/lib/jvm/java-6-openjdk/jre/lib/ppc/libverify.so: symbol JVM_GetCPMethodNameUTF, version SUNWprivate_1.1 not defined in file libjvm.so with link time reference dmake: Error code 1, while making '../../unxlngppc.pro/lib/libofficebean.so' patch: --- set_soenv.in-old2009-03-23 00:39:42.0 +0100 +++ set_soenv.in2009-03-23 00:42:23.0 +0100 @@ -478,7 +478,7 @@ # OpenJDK elsif ($JDK =~ m/sun/) { $JRELIBDIR = '$JAVA_HOME'.$ds.jre.$ds.lib.$ds.ppc; - $JRETOOLKITDIR = '$JAVA_HOME'.$ds.jre.$ds.lib.$ds.ppc.$ds.client; + $JRETOOLKITDIR = '$JAVA_HOME'.$ds.jre.$ds.lib.$ds.ppc.$ds.server; $JRETHREADDIR = '$JAVA_HOME'.$ds.jre.$ds.lib.$ds.ppc.$ds.native_threads; $JREEXTRALIBDIR = '$JAVA_HOME'.$ds.jre.$ds.lib.$ds.ppc.$ds.xawt; } hr: can we masterfix it to DEV300/OOO310? - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@porting.openoffice.org For additional commands, e-mail: issues-h...@porting.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[udk-issues] [Issue 100469] IA64: typesconfig fails
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100469 Issue #|100469 Summary|IA64: typesconfig fails Component|udk Version|OOO310m6 Platform|Other URL| OS/Version|Linux Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|code Assigned to|sb Reported by|rene --- Additional comments from r...@openoffice.org Mon Mar 23 00:37:51 + 2009 --- Hi, see http://experimental.debian.net/fetch.php?pkg=openoffice.orgver=1%3A3.1.0~ooo310m6-1arch=ia64stamp=1237763976file=logas=raw: Making: ../unxlnga.pro/bin/typesconfig unx cat ../unxlnga.pro/misc/typesconfig.typesconfig_1.cmd g++ -Wl,-z,combreloc -Wl,-z,defs -Wl,-rpath,'$ORIGIN:$ORIGIN/../ure-link/lib' -Wl,-export-dynamic -Wl,--noinhibit-exec -L../unxlnga.pro/lib -L../lib -L/build/buildd/openoffice.org-3.1.0~ooo310m6/ooo-build/build/ooo310-m6/solenv/unxlnga/lib -L/build/buildd/openoffice.org-3.1.0~ooo310m6/ooo-build/build/ooo310-m6/solver/310/unxlnga.pro/lib -L/build/buildd/openoffice.org-3.1.0~ooo310m6/ooo-build/build/ooo310-m6/solenv/unxlnga/lib -L/usr/lib/jvm/java-gcj/lib -L/usr/lib/jvm/java-gcj/jre/lib/ia64 -L/usr/lib/jvm/java-gcj/jre/lib/ia64/server -L/usr/lib/jvm/java-gcj/jre/lib/ia64/native_threads -L/usr/lib -L/usr/lib/iceape ../unxlnga.pro/obj/typesconfig.o \ -ldl -lpthread -lm -o ../unxlnga.pro/bin/typesconfig -rwxr-xr-x 1 buildd buildd 24095 Mar 22 23:13 ../unxlnga.pro/bin/typesconfig - mkdir ../unxlnga.pro/inc/sal ../unxlnga.pro/bin/typesconfig ../unxlnga.pro/inc/sal/typesizes.h char= signed char short = signed short int = signed int long= signed long long long = signed long long sizeof(short) = 2 sizeof(int) = 4 sizeof(long)= 8 sizeof(long long) = 8 sizeof(float) = 4 sizeof(double) = 8 sizeof(void *) = 8 LITTLEENDIAN (Intel, x86-64, PowerPC(LE)) dmake: Error code 134, while making '../unxlnga.pro/inc/sal/typesizes.h' ERROR: Error 65280 occurred while making /build/buildd/openoffice.org-3.1.0~ooo310m6/ooo-build/build/ooo310-m6/sal/typesconfig rmdir /tmp/19783 (sorry, don't have more info, and neither a access to a ia64 build-tree currently, this was a buildd build after an upload and it of course removed the tree again, not to mention I don't have access to the buildd host anyway) - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@udk.openoffice.org For additional commands, e-mail: issues-h...@udk.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[installation-issues] [Issue 100470] CAN'T UNINSTALL 310m5 - C AN'T INSTALL 310m5 or 310m7
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100470 Issue #|100470 Summary|CAN'T UNINSTALL 310m5 - CAN'T INSTALL 310m5 or 310m7 Component|Installation Version|OOO310m5 Platform|PC URL| OS/Version|Windows Vista Status|UNCONFIRMED Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P1 Subcomponent|www Assigned to|of Reported by|komnik --- Additional comments from kom...@openoffice.org Mon Mar 23 00:39:46 + 2009 --- OOO310m5 installed on Win Vista Enterprise SP1. Everything was working fine for about a week. The problem arrived when: 1. I clicked the button for automatic update. 2. OOO310m7 was downloaded, and unpacked at my desktop. 3. When the install dialog appeared a I got this message dialog: Please exit OOo-dev 3.1 and the OOo-dev 3.1 Quickstarter before you continue. If you are using a multiuser system, also make sure that no other user has OOO- dev 3.1 open 4. I closed the Quickstarter at the task bar. 5. The install app crashed. 6. I launched once more the installation from the desktop files, this is m7. The same message appeared and no changes to the installation were made. 7. I launched several times at ControlPanel/ProgramsAndFeatures the installation file first with option Uninstall, then with option Repair. I get the same message as above. 8. I deleted the directory C:/Program Files/OOo-dev and everything relevant I found in my AppData/Local or AppData/Roaming. 8. I even launched again the old OOo-Dev_OOO310_m5_Win32Intel_install_en- US.exe. I am still getting the same as above message: exit OOo and ... Quickstarter. So the situation is that I cannot finish uninstall of m5 neither can I install m5 or m7. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@installation.openoffice.org For additional commands, e-mail: issues-h...@installation.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[installation-issues] [Issue 100470] CAN'T UNINSTALL 310m5 - C AN'T INSTALL 310m5 or 310m7
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100470 --- Additional comments from kom...@openoffice.org Mon Mar 23 00:41:16 + 2009 --- Created an attachment (id=61107) A picture of the dialog I get before the unistall crash - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@installation.openoffice.org For additional commands, e-mail: issues-h...@installation.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[dba-issues] [Issue 100471] Result of data sort funct ion
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100471 Issue #|100471 Summary|Result of data sort function Component|Database access Version|1.0.0 Platform|PC URL| OS/Version|Windows XP Status|UNCONFIRMED Status whiteboard| Keywords| Resolution| Issue type|ENHANCEMENT Priority|P3 Subcomponent|none Assigned to|dbaneedsconfirm Reported by|jzsdii --- Additional comments from jzs...@openoffice.org Mon Mar 23 04:29:26 + 2009 --- First, I would like to say that I am VERY favorably impressed with your entire project. I've used the database for a home project and use the data sort frequently. The first time I used it, the column was sorted in place and the remaining data was untouched. This, I think, is more a function of a spreadsheet than a database. I'm used to specifying a column to sort and the entire record/row follows the sort order. I've learned that first specifying Select All in the edit menu makes the sort feature work the way I want. If it is technically unfeasible to change to the database type of sort, perhaps this method should be explained in the documentation. Thank you very much for all of your efforts. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@dba.openoffice.org For additional commands, e-mail: issues-h...@dba.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[graphics-issues] [Issue 100406] Excessive memory usage
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100406 --- Additional comments from jbfa...@openoffice.org Mon Mar 23 05:08:24 + 2009 --- Same problem in OOO310m7 - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 100465] WRITER crashes when copy/ paste more than one picture
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=100465 User rainerbielefeld changed the following: What|Old value |New value OS/Version|Linux |All Summary|WRITER crashes when drag-d|WRITER crashes when copy/p |rop more than one picture |aste more than one picture --- Additional comments from rainerbielef...@openoffice.org Mon Mar 23 05:44:04 + 2009 --- The ID of the error report is rvc9xvc. OS All due to comments from rainerbielefeld Sun Mar 22 I can not confirm that problem for drag and drop, only with copy / paste. I am pretty sure that I already saw an issue concerning this problem some time ago @nospam12: Really a problem with drag and drop? - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org