Re: Problem while integrating Midtier 7.1 with Crystal Report Server XI
=$PWD$SF=$RPTQUERY$ ( Note: I have changed only first sentence , do i need to do any other changes on this form , Please suggest) Finally : Tried generating report through midtier for incident Details , Its Failing :( Please let me know if i have missed any configurations. Thanks in Advance. Regards, Salma -- View this message in context: http://n2.nabble.com/Problem-while-integrating-Midtier-7.1-with-Crystal-Report-Server-XI-tp2537678p2537678.html Sent from the ARS (Action Request System) mailing list archive at Nabble.com. ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: RMI Solutions ARSlist: Where the Answers Are ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: RMI Solutions ARSlist: Where the Answers Are -- View this message in context: http://n2.nabble.com/Problem-while-integrating-Midtier-7.1-with-Crystal-Report-Server-XI-tp2537678p2555891.html Sent from the ARS (Action Request System) mailing list archive at Nabble.com. ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: RMI Solutions ARSlist: Where the Answers Are ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: RMI Solutions ARSlist: Where the Answers Are
Re: Problem while integrating Midtier 7.1 with Crystal Report Server XI
Hi Matt, Yes i have done that also . But still no luck. Please let me know the correct steps if u have done this integration . This will help me a lot. Thanks in Advance. Regards, Salma Salma, I don't see that you listed out performing the steps on pages 178-179 of the MT Installation Guide, to configure the Report Application Server parameters. Was that completed? Matt R. -Original Message- From: Action Request System discussion list(ARSList) [mailto:arsl...@arslist.org] On Behalf Of Salma Begum Sent: Thursday, March 26, 2009 5:39 AM To: arslist@ARSLIST.ORG Subject: Problem while integrating Midtier 7.1 with Crystal Report Server XI Hi All, After integrating crystal server with midtier i m not able to generate reports through Midtier. I m getting Failed to Perform Action Error message. Steps which i did so far.Server A - 1. Installed Java which is comapatible with Crystal Report 2. Installed Crystal Report Serevr XI along with Tomcat ( Manually set Ports) 3. Checked Crystal Report CMC console , it was working fine. 4. Installed TOmcat for ARWebReportViewer. ( Maually set Ports) 5. Installed ARWebReportViewer. 6. Checked arreports link (http://BO-server-name:8881/arreports/shared/config/configreport.jsp), It was working fine. Server B - 1. Installed AR Server 2. Installed TOmcat 5.x, Java 3. Installed Only Midtier 4. Checked midtier link , it was working fine.(http://ARserver name:8882/arsys) Configurations: --- Server A (Crystal report Server) 1. Configured ARWebReportViewer report settings like Reporting Working Directory (C:\Program Files\AR System\ARWebReportViewerITSM\reports) CMS Machine Name* - BO-server-name, CMS Machine Connection Details – --- Chose Business Objects Enterprise XI AR System ODBC Data Source Name - AR System ODBC Data Source CMS Folder Name - ARReports CMS User Name Pwd – Used same access details which we use for Crystal Report. Server B ( Ar Server) -- 1. Configured Midtier Report Settings Crystal/BO Report Engine Deployment - BOXI/Crystal Reports Server XI on a different machine without a mid tier Reporting Working Directory - (local folder on MidTier server) BOXI/Crystal Report Server 11 Location - http://BO-server-name: ( Should i give ARWebReportViewer path or Crystal Report Path) 2. Updated Report Type Form for Crystal Record Crystal10URL=http://BO-Server:/arreports/$RPTLOC$?init=$CRTVWR$User0=$USR$;ARServer=$ARSERVER$;ARServerPort=$AR SERVERPORT$;ARAuthentication=$ARAUTHENTICATION$;ARReportLocale=$LOC$;ARVUIType=1Password0=$PWD$SF=$RPTQUERY$ BORemoteAPPURL=$CRTXILOC$/arreports/$RPTLOC$?init=$CRTVWR$User0=$USR$;ARServer=$ARSERVER$;ARServerPort=$ARSERVERPOR T$;ARAuthentication=$ARAUTHENTICATION$;ARReportLocale=$LOC$;ARVUIType=1Password0=$PWD$SF=$RPTQUERY$ BOCurrentMidtierURL=$CRTXILOC$/arsys/$RPTLOC$?init=$CRTVWR$User0=$USR$;ARServer=$ARSERVER$;ARServerPort=$ARSERVERPO RT$;ARAuthentication=$ARAUTHENTICATION$;ARReportLocale=$LOC$;ARVUIType=1Password0=$PWD$SF=$RPTQUERY$ BORemoteMidtierURL=$CRTXILOC$/arsys/$RPTLOC$?init=$CRTVWR$User0=$USR$;ARServer=$ARSERVER$;ARServerPort=$ARSERVERPOR T$;ARAuthentication=$ARAUTHENTICATION$;ARReportLocale=$LOC$;ARVUIType=1Password0=$PWD$SF=$RPTQUERY$ ( Note: I have changed only first sentence , do i need to do any other changes on this form , Please suggest) Finally : Tried generating report through midtier for incident Details , Its Failing :( Please let me know if i have missed any configurations. Thanks in Advance. Regards, Salma -- View this message in context: http://n2.nabble.com/Problem-while-integrating-Midtier-7.1-with-Crystal-Report-Server-XI-tp2537678p2537678.html Sent from the ARS (Action Request System) mailing list archive at Nabble.com. ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: RMI Solutions ARSlist: Where the Answers Are ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: RMI Solutions ARSlist: Where the Answers Are -- View this message in context: http://n2.nabble.com/Problem-while-integrating-Midtier-7.1-with-Crystal-Report-Server-XI-tp2537678p2555846.html Sent from the ARS (Action Request System) mailing list archive at Nabble.com. ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: RMI Solutions ARSlist: Where the Answers Are
Re: Problem while integrating Midtier 7.1 with Crystal Report Server XI
Hi Rod, Thanks for the reply. If i take default port for Crsytal then wat about ARWebReportViewer it also required Tomcat and wheni install this on crystal server it is not able to detect the webserver which i installed wiht crystal server , So i need to use another tomcat with different port for ARWebReportViewer. Please suggest , How did u manage this . Regards, Salma Hi Salma, I don't think you're far away. Why did you update the report type form? If you specify the server correctly in your mid-tier report set up then I don't think you need to change this. I would make sure that your reports use the same datasource as the one defined on the crystal server. I don't use the default data source name as I use one BOXI server to serve up reports for several different Remedy servers. I create a system data source for each Remedy server. I use the default port for web reporting (80) so don't need to specify anything other than http://crystalserver in the BOXI report server location. A report (rpt file) is generated in folders beneath the reporting working directory on the crystal report server. Find out if this report is being created when you run your report. If it is have a look at it and make sure that it can be opened and run in crystal. Rod Harris On 26/03/2009, Salma Begum salmabeg...@gmail.com wrote: Hi All, After integrating crystal server with midtier i m not able to generate reports through Midtier. I m getting Failed to Perform Action Error message. Steps which i did so far.Server A - 1. Installed Java which is comapatible with Crystal Report 2. Installed Crystal Report Serevr XI along with Tomcat ( Manually set Ports) 3. Checked Crystal Report CMC console , it was working fine. 4. Installed TOmcat for ARWebReportViewer. ( Maually set Ports) 5. Installed ARWebReportViewer. 6. Checked arreports link ( http://BO-server-name:8881/arreports/shared/config/configreport.jsp), It was working fine. Server B - 1. Installed AR Server 2. Installed TOmcat 5.x, Java 3. Installed Only Midtier 4. Checked midtier link , it was working fine.(http://ARservername:8882/arsys) Configurations: --- Server A (Crystal report Server) 1. Configured ARWebReportViewer report settings like Reporting Working Directory (C:\Program Files\AR System\ARWebReportViewerITSM\reports) CMS Machine Name* - BO-server-name, CMS Machine Connection Details – --- Chose Business Objects Enterprise XI AR System ODBC Data Source Name - AR System ODBC Data Source CMS Folder Name - ARReports CMS User Name Pwd – Used same access details which we use for Crystal Report. Server B ( Ar Server) -- 1. Configured Midtier Report Settings Crystal/BO Report Engine Deployment - BOXI/Crystal Reports Server XI on a different machine without a mid tier Reporting Working Directory - (local folder on MidTier server) BOXI/Crystal Report Server 11 Location - http://BO-server-name: ( Should i give ARWebReportViewer path or Crystal Report Path) 2. Updated Report Type Form for Crystal Record Crystal10URL= http://BO-Server:/arreports/$RPTLOC$?init=$CRTVWR$User0=$USR$;ARServer=$ARSERVER$;ARServerPort=$AR SERVERPORT$;ARAuthentication=$ARAUTHENTICATION$;ARReportLocale=$LOC$;ARVUIType=1Password0=$PWD$SF=$RPTQUERY$ BORemoteAPPURL=$CRTXILOC$/arreports/$RPTLOC$?init=$CRTVWR$User0=$USR$;ARServer=$ARSERVER$;ARServerPort=$ARSERVERPOR T$;ARAuthentication=$ARAUTHENTICATION$;ARReportLocale=$LOC$;ARVUIType=1Password0=$PWD$SF=$RPTQUERY$ BOCurrentMidtierURL=$CRTXILOC$/arsys/$RPTLOC$?init=$CRTVWR$User0=$USR$;ARServer=$ARSERVER$;ARServerPort=$ARSERVERPO RT$;ARAuthentication=$ARAUTHENTICATION$;ARReportLocale=$LOC$;ARVUIType=1Password0=$PWD$SF=$RPTQUERY$ BORemoteMidtierURL=$CRTXILOC$/arsys/$RPTLOC$?init=$CRTVWR$User0=$USR$;ARServer=$ARSERVER$;ARServerPort=$ARSERVERPOR T$;ARAuthentication=$ARAUTHENTICATION$;ARReportLocale=$LOC$;ARVUIType=1Password0=$PWD$SF=$RPTQUERY$ ( Note: I have changed only first sentence , do i need to do any other changes on this form , Please suggest) Finally : Tried generating report through midtier for incident Details , Its Failing :( Please let me know if i have missed any configurations. Thanks in Advance. Regards, Salma -- View this message in context: http://n2.nabble.com/Problem-while-integrating-Midtier-7.1-with-Crystal-Report-Server-XI-tp2537678p2537678.html Sent from the ARS (Action Request System) mailing list archive at Nabble.com. ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: RMI Solutions ARSlist: Where the Answers Are ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor
Re: Problem while integrating Midtier 7.1 with Crystal Report Server XI
Hi Salma, I don't think you're far away. Why did you update the report type form? If you specify the server correctly in your mid-tier report set up then I don't think you need to change this. I would make sure that your reports use the same datasource as the one defined on the crystal server. I don't use the default data source name as I use one BOXI server to serve up reports for several different Remedy servers. I create a system data source for each Remedy server. I use the default port for web reporting (80) so don't need to specify anything other than http://crystalserver in the BOXI report server location. A report (rpt file) is generated in folders beneath the reporting working directory on the crystal report server. Find out if this report is being created when you run your report. If it is have a look at it and make sure that it can be opened and run in crystal. Rod Harris On 26/03/2009, Salma Begum salmabeg...@gmail.com wrote: Hi All, After integrating crystal server with midtier i m not able to generate reports through Midtier. I m getting Failed to Perform Action Error message. Steps which i did so far.Server A - 1. Installed Java which is comapatible with Crystal Report 2. Installed Crystal Report Serevr XI along with Tomcat ( Manually set Ports) 3. Checked Crystal Report CMC console , it was working fine. 4. Installed TOmcat for ARWebReportViewer. ( Maually set Ports) 5. Installed ARWebReportViewer. 6. Checked arreports link ( http://BO-server-name:8881/arreports/shared/config/configreport.jsp), It was working fine. Server B - 1. Installed AR Server 2. Installed TOmcat 5.x, Java 3. Installed Only Midtier 4. Checked midtier link , it was working fine.(http://ARservername:8882/arsys) Configurations: --- Server A (Crystal report Server) 1. Configured ARWebReportViewer report settings like Reporting Working Directory (C:\Program Files\AR System\ARWebReportViewerITSM\reports) CMS Machine Name* - BO-server-name, CMS Machine Connection Details – --- Chose Business Objects Enterprise XI AR System ODBC Data Source Name - AR System ODBC Data Source CMS Folder Name - ARReports CMS User Name Pwd – Used same access details which we use for Crystal Report. Server B ( Ar Server) -- 1. Configured Midtier Report Settings Crystal/BO Report Engine Deployment - BOXI/Crystal Reports Server XI on a different machine without a mid tier Reporting Working Directory - (local folder on MidTier server) BOXI/Crystal Report Server 11 Location - http://BO-server-name: ( Should i give ARWebReportViewer path or Crystal Report Path) 2. Updated Report Type Form for Crystal Record Crystal10URL= http://BO-Server:/arreports/$RPTLOC$?init=$CRTVWR$User0=$USR$;ARServer=$ARSERVER$;ARServerPort=$AR SERVERPORT$;ARAuthentication=$ARAUTHENTICATION$;ARReportLocale=$LOC$;ARVUIType=1Password0=$PWD$SF=$RPTQUERY$ BORemoteAPPURL=$CRTXILOC$/arreports/$RPTLOC$?init=$CRTVWR$User0=$USR$;ARServer=$ARSERVER$;ARServerPort=$ARSERVERPOR T$;ARAuthentication=$ARAUTHENTICATION$;ARReportLocale=$LOC$;ARVUIType=1Password0=$PWD$SF=$RPTQUERY$ BOCurrentMidtierURL=$CRTXILOC$/arsys/$RPTLOC$?init=$CRTVWR$User0=$USR$;ARServer=$ARSERVER$;ARServerPort=$ARSERVERPO RT$;ARAuthentication=$ARAUTHENTICATION$;ARReportLocale=$LOC$;ARVUIType=1Password0=$PWD$SF=$RPTQUERY$ BORemoteMidtierURL=$CRTXILOC$/arsys/$RPTLOC$?init=$CRTVWR$User0=$USR$;ARServer=$ARSERVER$;ARServerPort=$ARSERVERPOR T$;ARAuthentication=$ARAUTHENTICATION$;ARReportLocale=$LOC$;ARVUIType=1Password0=$PWD$SF=$RPTQUERY$ ( Note: I have changed only first sentence , do i need to do any other changes on this form , Please suggest) Finally : Tried generating report through midtier for incident Details , Its Failing :( Please let me know if i have missed any configurations. Thanks in Advance. Regards, Salma -- View this message in context: http://n2.nabble.com/Problem-while-integrating-Midtier-7.1-with-Crystal-Report-Server-XI-tp2537678p2537678.html Sent from the ARS (Action Request System) mailing list archive at Nabble.com. ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: RMI Solutions ARSlist: Where the Answers Are ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: RMI Solutions ARSlist: Where the Answers Are
Problem while integrating Midtier 7.1 with Crystal Report Server XI
Hi All, After integrating crystal server with midtier i m not able to generate reports through Midtier. I m getting Failed to Perform Action Error message. Steps which i did so far.Server A - 1. Installed Java which is comapatible with Crystal Report 2. Installed Crystal Report Serevr XI along with Tomcat ( Manually set Ports) 3. Checked Crystal Report CMC console , it was working fine. 4. Installed TOmcat for ARWebReportViewer. ( Maually set Ports) 5. Installed ARWebReportViewer. 6. Checked arreports link (http://BO-server-name:8881/arreports/shared/config/configreport.jsp), It was working fine. Server B - 1. Installed AR Server 2. Installed TOmcat 5.x, Java 3. Installed Only Midtier 4. Checked midtier link , it was working fine.(http://ARserver name:8882/arsys) Configurations: --- Server A (Crystal report Server) 1. Configured ARWebReportViewer report settings like Reporting Working Directory (C:\Program Files\AR System\ARWebReportViewerITSM\reports) CMS Machine Name* - BO-server-name, CMS Machine Connection Details – --- Chose Business Objects Enterprise XI AR System ODBC Data Source Name - AR System ODBC Data Source CMS Folder Name - ARReports CMS User Name Pwd – Used same access details which we use for Crystal Report. Server B ( Ar Server) -- 1. Configured Midtier Report Settings Crystal/BO Report Engine Deployment - BOXI/Crystal Reports Server XI on a different machine without a mid tier Reporting Working Directory - (local folder on MidTier server) BOXI/Crystal Report Server 11 Location - http://BO-server-name: ( Should i give ARWebReportViewer path or Crystal Report Path) 2. Updated Report Type Form for Crystal Record Crystal10URL=http://BO-Server:/arreports/$RPTLOC$?init=$CRTVWR$User0=$USR$;ARServer=$ARSERVER$;ARServerPort=$AR SERVERPORT$;ARAuthentication=$ARAUTHENTICATION$;ARReportLocale=$LOC$;ARVUIType=1Password0=$PWD$SF=$RPTQUERY$ BORemoteAPPURL=$CRTXILOC$/arreports/$RPTLOC$?init=$CRTVWR$User0=$USR$;ARServer=$ARSERVER$;ARServerPort=$ARSERVERPOR T$;ARAuthentication=$ARAUTHENTICATION$;ARReportLocale=$LOC$;ARVUIType=1Password0=$PWD$SF=$RPTQUERY$ BOCurrentMidtierURL=$CRTXILOC$/arsys/$RPTLOC$?init=$CRTVWR$User0=$USR$;ARServer=$ARSERVER$;ARServerPort=$ARSERVERPO RT$;ARAuthentication=$ARAUTHENTICATION$;ARReportLocale=$LOC$;ARVUIType=1Password0=$PWD$SF=$RPTQUERY$ BORemoteMidtierURL=$CRTXILOC$/arsys/$RPTLOC$?init=$CRTVWR$User0=$USR$;ARServer=$ARSERVER$;ARServerPort=$ARSERVERPOR T$;ARAuthentication=$ARAUTHENTICATION$;ARReportLocale=$LOC$;ARVUIType=1Password0=$PWD$SF=$RPTQUERY$ ( Note: I have changed only first sentence , do i need to do any other changes on this form , Please suggest) Finally : Tried generating report through midtier for incident Details , Its Failing :( Please let me know if i have missed any configurations. Thanks in Advance. Regards, Salma -- View this message in context: http://n2.nabble.com/Problem-while-integrating-Midtier-7.1-with-Crystal-Report-Server-XI-tp2537678p2537678.html Sent from the ARS (Action Request System) mailing list archive at Nabble.com. ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: RMI Solutions ARSlist: Where the Answers Are
Re: Problem while integrating Midtier 7.1 with Crystal Report Server XI
Salma, I don't see that you listed out performing the steps on pages 178-179 of the MT Installation Guide, to configure the Report Application Server parameters. Was that completed? Matt R. -Original Message- From: Action Request System discussion list(ARSList) [mailto:arsl...@arslist.org] On Behalf Of Salma Begum Sent: Thursday, March 26, 2009 5:39 AM To: arslist@ARSLIST.ORG Subject: Problem while integrating Midtier 7.1 with Crystal Report Server XI Hi All, After integrating crystal server with midtier i m not able to generate reports through Midtier. I m getting Failed to Perform Action Error message. Steps which i did so far.Server A - 1. Installed Java which is comapatible with Crystal Report 2. Installed Crystal Report Serevr XI along with Tomcat ( Manually set Ports) 3. Checked Crystal Report CMC console , it was working fine. 4. Installed TOmcat for ARWebReportViewer. ( Maually set Ports) 5. Installed ARWebReportViewer. 6. Checked arreports link (http://BO-server-name:8881/arreports/shared/config/configreport.jsp), It was working fine. Server B - 1. Installed AR Server 2. Installed TOmcat 5.x, Java 3. Installed Only Midtier 4. Checked midtier link , it was working fine.(http://ARserver name:8882/arsys) Configurations: --- Server A (Crystal report Server) 1. Configured ARWebReportViewer report settings like Reporting Working Directory (C:\Program Files\AR System\ARWebReportViewerITSM\reports) CMS Machine Name* - BO-server-name, CMS Machine Connection Details – --- Chose Business Objects Enterprise XI AR System ODBC Data Source Name - AR System ODBC Data Source CMS Folder Name - ARReports CMS User Name Pwd – Used same access details which we use for Crystal Report. Server B ( Ar Server) -- 1. Configured Midtier Report Settings Crystal/BO Report Engine Deployment - BOXI/Crystal Reports Server XI on a different machine without a mid tier Reporting Working Directory - (local folder on MidTier server) BOXI/Crystal Report Server 11 Location - http://BO-server-name: ( Should i give ARWebReportViewer path or Crystal Report Path) 2. Updated Report Type Form for Crystal Record Crystal10URL=http://BO-Server:/arreports/$RPTLOC$?init=$CRTVWR$User0=$USR$;ARServer=$ARSERVER$;ARServerPort=$AR SERVERPORT$;ARAuthentication=$ARAUTHENTICATION$;ARReportLocale=$LOC$;ARVUIType=1Password0=$PWD$SF=$RPTQUERY$ BORemoteAPPURL=$CRTXILOC$/arreports/$RPTLOC$?init=$CRTVWR$User0=$USR$;ARServer=$ARSERVER$;ARServerPort=$ARSERVERPOR T$;ARAuthentication=$ARAUTHENTICATION$;ARReportLocale=$LOC$;ARVUIType=1Password0=$PWD$SF=$RPTQUERY$ BOCurrentMidtierURL=$CRTXILOC$/arsys/$RPTLOC$?init=$CRTVWR$User0=$USR$;ARServer=$ARSERVER$;ARServerPort=$ARSERVERPO RT$;ARAuthentication=$ARAUTHENTICATION$;ARReportLocale=$LOC$;ARVUIType=1Password0=$PWD$SF=$RPTQUERY$ BORemoteMidtierURL=$CRTXILOC$/arsys/$RPTLOC$?init=$CRTVWR$User0=$USR$;ARServer=$ARSERVER$;ARServerPort=$ARSERVERPOR T$;ARAuthentication=$ARAUTHENTICATION$;ARReportLocale=$LOC$;ARVUIType=1Password0=$PWD$SF=$RPTQUERY$ ( Note: I have changed only first sentence , do i need to do any other changes on this form , Please suggest) Finally : Tried generating report through midtier for incident Details , Its Failing :( Please let me know if i have missed any configurations. Thanks in Advance. Regards, Salma -- View this message in context: http://n2.nabble.com/Problem-while-integrating-Midtier-7.1-with-Crystal-Report-Server-XI-tp2537678p2537678.html Sent from the ARS (Action Request System) mailing list archive at Nabble.com. ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: RMI Solutions ARSlist: Where the Answers Are ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: RMI Solutions ARSlist: Where the Answers Are
