Hi
I have a Digium TDM400 card with 4 FXO modules
connected tothe extension ports onaPanasonic KXTD816.
I'm using [EMAIL PROTECTED] v1.0, which has
Asterisk 1.07.
There's a problem that Asterisk doesn't detect when
the line is disconnected on the Panasonic. The Panasonic doesn't provide
polarity reversal orcurrent drop or anything like that to indicate hangup.
It just plays the dial tone again.
I've tried several different things, thinking that
the settings were not correct for South Africa. I've tried adding busydetect=yes and busycount=4, since that worked for
our analogue Telecom lines (they work the same way as the
Panasonic).
At the moment, I'm thinking I need to change the
busy tone in indications.conf. Currently, it is set to 400/500,0/500,
which are the settings for Alcatel switches in the Western Cape, South
Africa. The PABX seems to need 400/250,0/250, but that doesn't
work.
Has anybody tried this before? It's probably
not specific to South Africa, but Panasonic KXTD PABXs.
Regards
Hilton
Datatex Dynamics CC Web site http://www.datatex.co.za/ Email
to [EMAIL PROTECTED] Tel
+27215924033Fax +27215924077
The use of the Datatex e-mail facility is not permitted
for the distribution of chain letters or offensive email
of any nature whatsoever. Datatex hereby distances itself
from and accepts no liability in respect of the
unauthorised use of its e-mail facility or the sending of
e-mail communications for other than strictly business
purposes. Datatex furthermore disclaims liability for any
unauthorised instruction for which permission was not
granted. Any recipient of an unacceptable communication,
a chain letter or offensive material of any nature is
requested to report it to [EMAIL PROTECTED].
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users