[asterisk-users] outgoing callerid problem
Hi, I have a B410P card with bri_cpe signalling and two Openvox analog card (A1200p, A800P) with fxo_ks signalling. From the ISDN we have Point-Point 10 connection with a 10 public phone number range. If I receive a public call, the asterisk recevies the last two digit from this range, so it works, I can receive all the 10 numbers. If I'd like to dial from an exten which I have to dedicate a public phone number, the callerid always the fist number from the range. the chan_dahdi.conf [channels] usecallerid=yes callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes callgroup=1 pickupgroup=1 useincomingcalleridondahditransfer = yes mohinterpret=default mohsuggest=default #include dahdi-channels.conf switchtype = euroisdn signalling = bri_cpe group = 0 channel = 1,2,4,5,7,8,10,11 signalling=fxo_ks group = 0 channel =13-28 the dahdi-channels.conf just on of the channels which I need a public phone number instead of 39XXX50 ;;; line=23 OPVXA1200/12/2 signalling=fxo_ks callerid=39XXX53 mailbox= group=0 context=default channel = 23 callerid=39XXX53 mailbox= group=0 context=default Please let me know what do I misconfigure. Thanks for any help in advence. Best regards, Peter Gelencser -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Outgoing CallerID for KPN in Belgium
Hi, I'm using a ISDN-30 E1 line from KPN Belgium. The challenge is to get a correct CallerID on outgoing lines. When I put this in my dialplan: exten = _0.,1,Set(TEMPVAR=${CALLERID(num):1}) exten = _0.,2,Set(CALLERID(num)=144622${TEMPVAR}) exten = _0.,3,NoOp(${CALLERID(num)}) exten = _0.,4,Dial(Zap/g1/${EXTEN:1},,) The resulting CallerID is accepted by the telco, but on phones it shows for instance as: +14462241, whereas it should be +3214462241. So it seems the telco adds a +. I've tried to then use: exten = _0.,2,Set(CALLERID(num)=32144622${TEMPVAR}) but the telco seems not to accept this since it sends the general CallerID out. Any clues on what I need to change to get this working? Is it something in zapata.conf? Is it related to nationalprefix and internationalprefix? Thank you! B. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Outgoing CallerID for KPN in Belgium
Bart Coninckx wrote: Hi, I'm using a ISDN-30 E1 line from KPN Belgium. The challenge is to get a correct CallerID on outgoing lines. When I put this in my dialplan: exten = _0.,1,Set(TEMPVAR=${CALLERID(num):1}) exten = _0.,2,Set(CALLERID(num)=144622${TEMPVAR}) exten = _0.,3,NoOp(${CALLERID(num)}) exten = _0.,4,Dial(Zap/g1/${EXTEN:1},,) The resulting CallerID is accepted by the telco, but on phones it shows for instance as: +14462241, whereas it should be +3214462241. So it seems the telco adds a +. I've tried to then use: exten = _0.,2,Set(CALLERID(num)=32144622${TEMPVAR}) but the telco seems not to accept this since it sends the general CallerID out. Any clues on what I need to change to get this working? Is it something in zapata.conf? Is it related to nationalprefix and internationalprefix? Your best bet is to ask your telco what caller ID format you should be presenting. Asterisk is obviously working as expected, but for whatever reason the telco is either not accepting the right format, or not processing the presented caller ID correctly. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Outgoing CallerID w. DAHDI on ISDN BRI
Hi List, i've set up an Asterisk 1.6.0.3 Server equipped with an Xorcom Astribank BRI XR0013 (2 Port BRI) and Dahdi 2.1.0. In- and outgoing calls are no problem. But I can't get Asterisk/DAHDI to use the second Number of the BRI. All calls set the primary number as callerid. It wouldn't be a problem, if we would use this one as id for our company, but it's already in use (private). I tried with Set(Callerid(num)=12345)/Set(Callerid(number) in extensions.conf and callerid=12345 in chan_dahdi.conf and in dahdi-channels.conf. In Dahdi i activated all options for transmitting a callerid, including the ones for PRI (for Testing). Has anybody an idea? Thanks in advance for any hint/help/tip. Mit freundlichen Grüßen / Kind Regards Peter Müller___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Outgoing CallerID
I am not sure of the best way to do this, so I thought I would query the list. I have about 100 internal extensions ranging from 2000 - 2100. Each internal extension has a external DID number. For example: 2001 = 5552871620. As you can see the internal externsion and DID don't match in any way. What would be the best way to set the DID for when a extension dials out on the PRI? In sip.conf I am using CallerID as their internal number. I thought of maybe adding a key for each extension to the astdb and have a Macro query the astdb. Any other ideas? Thanks. -- *** Forrest Beck IAXTEL: 17002871718 [EMAIL PROTECTED] ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Outgoing CallerID
On Thu, 19 Apr 2007, Forrest Beck said something to this effect: I thought of maybe adding a key for each extension to the astdb and have a Macro query the astdb. Any other ideas? That would work, and is certainly the easiest, since you can bulk-load the DID - extension maps via external CLI commands with a simple script. You could also have Asterisk do MySQL dips for this information, if the desire is to administer it from a web-based front-end. Or if there is some sort of mathematical relationship between the extension and the DID range, the dialplan interpreter itself is capable of fairly sophisticated mathematical extrapolations. -- Alex -- Alex Balashov [EMAIL PROTECTED] ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Outgoing CallerID
On 4/19/07, Forrest Beck [EMAIL PROTECTED] wrote: I thought of maybe adding a key for each extension to the astdb and have a Macro query the astdb. Any other ideas? That's how we do it. We created a MySQL DB that maps DIDs to extensions, and a php script to write our configuration files for us (a file called did.conf, which is #include'd into extensions.conf), as well as push the DID into the Asterisk DB. Actually the DB holds all of the information for our phones, and all of the files we need are generated each night, including sip configs, provisioning files for our Polycoms, the dhcpd configurations to give static addresses, and a few other miscellaneous files. And it creates our phone list. The nice thing about building the DB yourself is that you can do anything you want with it. On one of our boxes, I went a step further and created individual outgoing contexts, one for each device. The context set the caller ID. But it was definite overkill; I haven't done that since. Thanks. -- *** Forrest Beck IAXTEL: 17002871718 [EMAIL PROTECTED] ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Outgoing CallerID
Thanks. I will just use the asterisk database. This brought up a new question though. This is what I am using to dial out. If a key for the phone exist in the db it will assign it the did specified. If not, just assign the main incoming operator number. I have a new family in the astdb named external_did. Some entries look like this: external_did/2503/9195551212 external_did/2505/9195551213 [macro-dialoutpstn] exten = s,1,Set(curextension=${CALLERID(num)}) exten = s,2,Set(dbdid=${DB(external_did/${curextension})}) exten = s,3,NoOp(${curextension}) exten = s,4,NoOp(${dbdid}) exten = s,4,GoToIf($[${dbdid} = ]?5:8) exten = s,5,Set(CALLERID(num)=9195559595) exten = s,6,Dial(SIP/mspri/${MACRO_EXTEN:1},300) exten = s,7,Hanup() exten = s,8,Set(CALLERID(num)=${DB(external_did/${curextension})}) exten = s,9,NoOp(${CALLERID(num)}) exten = s,10,Dial(SIP/mspri/${MACRO_EXTEN:1},300) exten = s,11,Hangup() This works just fine. Now what about my incoming calls. My incoming calls will be sent from the telco to asterisk as the seven digit number that was dialed. So if I have _X. in my context it will be processed as extension 9195551212. So is there a way to lookup in the asterisk database a value and return the key it belongs to? Because I already have the phone number in the asterisk database set to each extension. I know I could just create a new family and add the keys there, like so incoming_did/9195551212/2503 incoming_did/9195551213/2504 I was just looking to see if I could save myself a step. This may be where I will need to switch to MySQL. On 4/19/07, Alex Balashov [EMAIL PROTECTED] wrote: On Thu, 19 Apr 2007, Forrest Beck said something to this effect: I thought of maybe adding a key for each extension to the astdb and have a Macro query the astdb. Any other ideas? That would work, and is certainly the easiest, since you can bulk-load the DID - extension maps via external CLI commands with a simple script. You could also have Asterisk do MySQL dips for this information, if the desire is to administer it from a web-based front-end. Or if there is some sort of mathematical relationship between the extension and the DID range, the dialplan interpreter itself is capable of fairly sophisticated mathematical extrapolations. -- Alex -- Alex Balashov [EMAIL PROTECTED] ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- *** Forrest Beck IAXTEL: 17002871718 [EMAIL PROTECTED] ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Outgoing callerid in AMI
Hello I have a problem with callerid in the manager interface. I think that Asterisk has a strange way to handle callerid, until I found out to set the o-switch in the DIAL statement, it did not work the way I wanted, it still doesnt, but now it works ok in one direction. My extension is 311, if 310 tries to call me, and I do a STATUS request on the manager interface, I get this back: Event: Status Privilege: Call Channel: SIP/311-08b97790 CallerID: 310 CallerIDName: Aastra Account: State: Ringing Uniqueid: 1157967815.19 This is correct, I can see that the callerid is 310 However, if I call 310, and do a STATUS request, I get this back: Event: Status Privilege: Call Channel: SIP/311-08b8dd58 CallerID: 311 CallerIDName: Snom Account: State: Ring Context: macro-vm Extension: s Priority: 5 Seconds: 4 Uniqueid: 1157967902.20 Not very useful, the callerid is 311 (myself), and there is no information that I'm trying to call 310. Is there a way to fix this, that I have overlooked? Michael ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Outgoing CallerID on PRI problems
For outgoing calls made on our PRI circuit we are setting the Caller ID using the format Exten = _9XXX,1,SetCallerID(1601XXX) The monitor shows that the CallerID is being set to the specified number, but yet when the call is received on the user end the ID is always the base number of our DID. For example we have 8600-8650 as DID's but the callerid is always 8600 regardless of the extension that makes the outgoing call. We have tried using the variable SetCallerID(${BYEXTENSION}) but still get the same results. Any suggestions? JP McInnis, Director of Technology Copiah Lincoln Community College ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Outgoing CallerID on PRI problems
On Tuesday 29 June 2004 10:13, McInnis, JP wrote: The monitor shows that the CallerID is being set to the specified number, but yet when the call is received on the user end the ID is always the base number of our DID. For example we have 8600-8650 as DID's but the callerid is always 8600 regardless of the extension that makes the outgoing call. Your telco is restricting your outgoing caller ID. I'd contact your sales rep, as this is something only the telco can fix. -A. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Outgoing CallerID on PRI problems
Regardless of what you send in callerid, your PRI has a phone number associated with it that you don't see, but is used for billing. This is so you cannot spoof the LD company into thinking the call came from somewhere other than from you. I believe the PRI provider can provision the PRI to use either this hard-wired callerid , or the one you provide. It sounds to me like your PRI is provisioned as the former. I would talk to your PRI provider and see if they agree and are willing to change this. Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 236-5815 On Tue, 29 Jun 2004, McInnis, JP wrote: For outgoing calls made on our PRI circuit we are setting the Caller ID using the format Exten = _9XXX,1,SetCallerID(1601XXX) The monitor shows that the CallerID is being set to the specified number, but yet when the call is received on the user end the ID is always the base number of our DID. For example we have 8600-8650 as DID's but the callerid is always 8600 regardless of the extension that makes the outgoing call. We have tried using the variable SetCallerID(${BYEXTENSION}) but still get the same results. Any suggestions? JP McInnis, Director of Technology Copiah Lincoln Community College ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Outgoing CallerID on PRI problems
Drop the leading 1 On Tue, 2004-06-29 at 09:13, McInnis, JP wrote: For outgoing calls made on our PRI circuit we are setting the Caller ID using the format Exten = _9XXX,1,SetCallerID(1601XXX) The monitor shows that the CallerID is being set to the specified number, but yet when the call is received on the user end the ID is always the base number of our DID. For example we have 8600-8650 as DID's but the callerid is always 8600 regardless of the extension that makes the outgoing call. We have tried using the variable SetCallerID(${BYEXTENSION}) but still get the same results. Any suggestions? JP McInnis, Director of Technology Copiah Lincoln Community College ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Eric Wieling * BTEL Consulting * 504-899-1387 x2111 In a related story, the IRS has recently ruled that the cost of Windows upgrades can NOT be deducted as a gambling loss. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Outgoing CallerID on PRI problems
Some telcos require you only to send a certain number of digits. Try sending fewer and fewer digits and see if it starts working. E.g. instead of sending 1601abcdefg try sending 601abcdefg or abcdefg or defg or even fg If this doesn't work, from the CLI type pri debug span x and see what you get in the SETUP message. Other possiblities are in zapata.conf - you may need to set the correct parameters for your type of PRI. Best thing might be to ask your telco how your line is configured. Please report back with success/failure. We all like to hear of people's successes as well as problems! Rgds Tim -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of McInnis, JP Sent: 29 June 2004 15:13 To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Outgoing CallerID on PRI problems For outgoing calls made on our PRI circuit we are setting the Caller ID using the format Exten = _9XXX,1,SetCallerID(1601XXX) The monitor shows that the CallerID is being set to the specified number, but yet when the call is received on the user end the ID is always the base number of our DID. For example we have 8600-8650 as DID's but the callerid is always 8600 regardless of the extension that makes the outgoing call. We have tried using the variable SetCallerID(${BYEXTENSION}) but still get the same results. Any suggestions? JP McInnis, Director of Technology Copiah Lincoln Community College ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Outgoing CallerID
Calling Number (len=12) [ Ext: 0 TON: International Number (1) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) Presentation: Presentation permitted, user number passed network screening (1) '4330' ] It might be that the number plan is international Change pridialplan to unknown in zapata.conf Martin Called Number (len=11) [ Ext: 1 TON: International Number (1) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '2840' ] Cant figure out what's wrong? regards Mickey Binder ÿÿÿÀ²×«ÉÿRÇ«²f¢)à+-Ë^®+$ýK ®ÏåËlýØ éÿr¡¶Úÿÿùb²Ûÿv(ºoÜ¢oæj)fjåËbú?jË^®+$þë That was it, I changed dialplan=international to dialplan=unknown and it worked. Thank you very much Mickey Binder [EMAIL PROTECTED])fjåËbú?jË^®+$ºÇ«
RE: [Asterisk-Users] Outgoing CallerID
JanM wrote: Hello, Does anyone know how to set the outgoing CallerID properly when using Snom200/SIP/CAPI/BRI? --SNIP-- My mobile is only showing some other number that my isdn line is having. ---JanM--- Telecom restrictions? I can set only caller IDs within the set of numbers provided me from telecom. Check with your telecom if you're allowed to set any caller ID. I'm experiencing the exact same behavior. I have an E1 line (using TE410P) with 30 numbers associated to it, and I know that I'm allowed to change the outgoing CallerID, because our production PBX is a Lucent ArgentBranch, and when dialing out from this the CallerId displays correct. I've tried some different configurations in order to get it to work but without luck. This is a snip of my extensions.conf [Outgoing] ; ;Outside access via Zaptel interface (PRI) exten = _XX.,1,SetCallerId(4330) exten = _XX.,2,Dial,Zap/g1/BYEXTENSION The main isdn number is 4399 and is the only number I can get displayed when calling. regards Mickey Binder ,µêâ²E,z»j)b b²Ð,µêâ²E,z»%Ëlv(ºg(m§ÿåËlv(ºg(ùYùb²Ø§~ڲ׫É.±êì
RE: [Asterisk-Users] Outgoing CallerID
JanM wrote: Hello, Does anyone know how to set the outgoing CallerID properly when using Snom200/SIP/CAPI/BRI? --SNIP-- My mobile is only showing some other number that my isdn line is having. ---JanM--- Telecom restrictions? I can set only caller IDs within the set of numbers provided me from telecom. Check with your telecom if you're allowed to set any caller ID. I'm experiencing the exact same behavior. I have an E1 line (using TE410P) with 30 numbers associated to it, and I know that I'm allowed to change the outgoing CallerID, because our production PBX is a Lucent ArgentBranch, and when dialing out from this the CallerId displays correct. I've tried some different configurations in order to get it to work but without luck. This is a snip of my extensions.conf [Outgoing] ; ;Outside access via Zaptel interface (PRI) exten = _XX.,1,SetCallerId(4330) exten = _XX.,2,Dial,Zap/g1/BYEXTENSION The main isdn number is 4399 and is the only number I can get displayed when calling. regards Mickey Binder I've done some more testing and by debugging the pri span I think I've found where it tries to present the outgoing id. To me everything looks ok but still the only number I see from the outside is my main ISDN number. Here is a couple of lines from the log: Calling Number (len=12) [ Ext: 0 TON: International Number (1) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) Presentation: Presentation permitted, user number passed network screening (1) '4330' ] Called Number (len=11) [ Ext: 1 TON: International Number (1) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '2840' ] Cant figure out what's wrong? regards Mickey Binder ,µêâ²E,z»j)b b²Ð,µêâ²E,z»%Ëlv(ºg(m§ÿåËlv(ºg(ùYùb²Ø§~ڲ׫É.±êì
RE: [Asterisk-Users] Outgoing CallerID
Calling Number (len=12) [ Ext: 0 TON: International Number (1) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) Presentation: Presentation permitted, user number passed network screening (1) '4330' ] It might be that the number plan is international Change pridialplan to unknown in zapata.conf Martin Called Number (len=11) [ Ext: 1 TON: International Number (1) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '2840' ] Cant figure out what's wrong? regards Mickey Binder ÿÿÿÀ²×«ÉÿRÇ«²f¢)à+-Ë^®+$ýK®ÏåËlýØ éÿr¡¶Úÿÿùb²Ûÿv(ºoÜ¢oæj)fjåËbú?jË^®+$þë ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Outgoing CallerID
Mickey: At least in some European countries and southamerican environments, you can't send your own ANI. For example: if you have a PRI with the number: 5288 to 52880099, you could send as ANI any number between 000 and 099. The fixed part will be transmitted by your PSTN switch to the network attaching the last 2 number that you send. Generally, if you send a differente qty of numbers that the switch needs or number you have sent is wrong, the ANI transmited by the PSTN switch will be the main DID number (generally, 5288). If you could send you own ANI, the carriers will be charge the calls to that ANI... think about it. It's a fraude principle. You could specify which number (between your number range) you send to PSTN switch. You could set Presentation Indicator in setup message. If you set to Allow your ANI will be shown in the other side, and if you set as Not allow the PSTN will hide your ANI. This is valid only to show the data in the B subscriber FSK demodulator (callerid receiver). Please don't confuse about CallerID with ANI! You can hide or send a particular CallerID, but you never can hide your ANI o sends other ANI range than yours. In fact, the CallerID follows to ANI digits. Technically, CallerID is only 1 byte that allow to hide o shows your ANI. Thats all... Regards, Gus - Original Message - From: Mickey Binder [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, October 16, 2003 4:09 PM Subject: RE: [Asterisk-Users] Outgoing CallerID JanM wrote: Hello, Does anyone know how to set the outgoing CallerID properly when using Snom200/SIP/CAPI/BRI? --SNIP-- My mobile is only showing some other number that my isdn line is having. ---JanM--- Telecom restrictions? I can set only caller IDs within the set of numbers provided me from telecom. Check with your telecom if you're allowed to set any caller ID. I'm experiencing the exact same behavior. I have an E1 line (using TE410P) with 30 numbers associated to it, and I know that I'm allowed to change the outgoing CallerID, because our production PBX is a Lucent ArgentBranch, and when dialing out from this the CallerId displays correct. I've tried some different configurations in order to get it to work but without luck. This is a snip of my extensions.conf [Outgoing] ; ;Outside access via Zaptel interface (PRI) exten = _XX.,1,SetCallerId(4330) exten = _XX.,2,Dial,Zap/g1/BYEXTENSION The main isdn number is 4399 and is the only number I can get displayed when calling. regards Mickey Binder I've done some more testing and by debugging the pri span I think I've found where it tries to present the outgoing id. To me everything looks ok but still the only number I see from the outside is my main ISDN number. Here is a couple of lines from the log: Calling Number (len=12) [ Ext: 0 TON: International Number (1) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) Presentation: Presentation permitted, user number passed network screening (1) '4330' ] Called Number (len=11) [ Ext: 1 TON: International Number (1) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '2840' ] Cant figure out what's wrong? regards Mickey Binder ®R²--®R²¶,r?¡¶ÚþX¬¶Çb,+¦r?¿T¨¥T©ÿ-+-Swèý«-z¸¬'ë ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Outgoing CallerID
Hello, Does anyone know how to set the outgoing CallerID properly when using Snom200/SIP/CAPI/BRI? Following doesn´t work: exten = _0.,1,SetCallerID,526910 exten = _0.,2,Dial,CAPI/526980:${EXTEN:1} Asterisk writes: *CLI -- Executing SetCallerID(SIP/226-ada0, 526910) in new stack -- Executing Dial(SIP/226-ada0, CAPI/526980:0408665390) in new stack -- Called 526980:0408665390 -- CAPI[contr3/526980]/0 is ringing My mobile is only showing some other number that my isdn line is having. ---JanM--- ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Outgoing CallerID
JanM wrote: Hello, Does anyone know how to set the outgoing CallerID properly when using Snom200/SIP/CAPI/BRI? Following doesn´t work: exten = _0.,1,SetCallerID,526910 exten = _0.,2,Dial,CAPI/526980:${EXTEN:1} Asterisk writes: *CLI -- Executing SetCallerID(SIP/226-ada0, 526910) in new stack -- Executing Dial(SIP/226-ada0, CAPI/526980:0408665390) in new stack -- Called 526980:0408665390 -- CAPI[contr3/526980]/0 is ringing My mobile is only showing some other number that my isdn line is having. ---JanM--- Telecom restrictions? I can set only caller IDs within the set of numbers provided me from telecom. Check with your telecom if you're allowed to set any caller ID. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] outgoing callerid string
Is there a way for me to set my outgoing callerid string so that all callers outside of my pbx see our callerid string as company name main company number but callers inside our telephone network see extension holders name extension number? In looking at the references it looks like I can do one or the other but not both. Does anyone know how I might accomplish this? Thanks for any suggestions. AJ ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] outgoing callerid string
You can set this in zapata.conf. Basically, you just define the callerid before you define the channel. Outgoing channels will have the callerid of the company, and internal channels will have the callerid of the extension. In zapata.conf Example: ;I don't think you have to change anything in the fxo_ks channels because that will be handled by the phone company. signalling=fxs_ks callerid=Receptionist 0 channel=4 callerid=Adam West 555 channel=5 Is there a way for me to set my outgoing callerid string so that all callers outside of my pbx see our callerid string as company name main company number but callers inside our telephone network see extension holders name extension number? In looking at the references it looks like I can do one or the other but not both. Does anyone know how I might accomplish this? Thanks for any suggestions. AJ ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] outgoing callerid string
You can use the SetCallerID application to do this, as well. Whenever a call is destined for the outside world, just SetCallerID(13334445) Am I missing something more complex here? Of course, you'll need to have a PRI to do this, and 1333444 needs to be a permitted number for your outbound calls. JT You can set this in zapata.conf. Basically, you just define the callerid before you define the channel. Outgoing channels will have the callerid of the company, and internal channels will have the callerid of the extension. In zapata.conf Example: ;I don't think you have to change anything in the fxo_ks channels because that will be handled by the phone company. signalling=fxs_ks callerid=Receptionist 0 channel=4 callerid=Adam West 555 channel=5 Is there a way for me to set my outgoing callerid string so that all callers outside of my pbx see our callerid string as company name main company number but callers inside our telephone network see extension holders name extension number? In looking at the references it looks like I can do one or the other but not both. Does anyone know how I might accomplish this? Thanks for any suggestions. AJ ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users