Re: [Asterisk-Users] hangup lag causing the answering of already answered calls
Well I've found out what was causing my duplicate logging: it was entirely a NAT issue. Found out it was only happening on some remote endpoints (and not all of them), and that different routers proved to not have duplicate logging. What part of NAT could cause this? Was it really sending all packets twice, or something like that? Just seems kinda strange. Anyway, it's no longer a problem. My original problem, however, remains. Phone doesn't stop ringing when it's meant to. Only happens when call is via my ZapATA. Any ideas/help/input is appreciated! Regards, Carey. On Sun, 2006-06-11 at 15:18 +1000, Carey O'Shea wrote: Does anyone have any ideas as to what can cause this large delay to stop ringing? It's quite a show stopper... imagine ringing a business and being answered by 3 different people, one after the other, all talking over the top of each other. On Fri, 2006-06-09 at 15:12 +1000, Carey O'Shea wrote: Hi Undrhil, A logical idea, but unfortunately adding it didn't change anything. Two important points: (1) When I test this with just IAX endpoints, no Zap, the call is hungup immediately, (2) but the console still shows the user being called twice. So as a wild guess, maybe the console logging twice is OK, and it's my Zap configuration? * extensions.conf: [incoming] exten = s,1,Dial(IAX2/carey) exten = s,2,Hangup(IAX2/carey) * zapata.conf: [channels] usecallerid=no signalling=fxs_ks context=incoming channel = 4 * zaptel.conf loadzone=au defaultzone=au fxsks=4 * ztcfg -vv Channel 04: FXS Kewlstart (Default) (Slaves: 04) 1 channels configured. I'm from Australia so I assume the loadzone and defaultzone is OK as per zaptel.c. Did not post iax.conf due to my SIP phones having the same behaviour, and IAX-to-IAX not exhibiting the problem. On Fri, 2006-06-09 at 04:54 +, [EMAIL PROTECTED] wrote: So, your dialplan for that incoming call is just the one line? exten = s,1,Dial(IAX2/carey) Nothing else? Try adding a Hangup command on the next priority and see if that helps any. exten = s,2,Hangup If you already have a Hangup command in there, then I apologize for wasting your time. :) Undrhil --- Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com wrote: I have a TDM-400P with one FXO module. On an incoming call, I have set Asterisk to dial my phone (exten = s,1,Dial(IAX2/carey)), which is basically the only thing in my dialplan. When the call is answered by the PSTN phone first, or when the ringing call is hung up, Asterisk keeps ringing for 5+ seconds, which causes trouble (the answering of already answered calls). I noticed in the Asterisk console that my phone is called twice every time there is an incoming call. Is this normal, and could it be causing this behaviour? If not, any ideas as to what could be causing this? I can provide full debug logs and my relevant configuration if needed. Console log: -- Starting simple switch on 'Zap/4-1' -- Executing Dial(Zap/4-1, IAX2/carey) in new stack -- Called carey -- Starting simple switch on 'Zap/4-1' -- Executing Dial(Zap/4-1, IAX2/carey) in new stack -- Called carey -- Call accepted by 10.0.12.102 (format ulaw) -- Format for call is ulaw -- Call accepted by 10.0.12.102 (format ulaw) -- Format for call is ulaw -- IAX2/carey-1 is ringing -- IAX2/carey-1 is ringing -- Hungup 'IAX2/carey-1' == Spawn extension (incoming, s, 1) exited non-zero on 'Zap/4-1' -- Hungup 'Zap/4-1' -- Hungup 'IAX2/carey-1' == Spawn extension (incoming, s, 1) exited non-zero on 'Zap/4-1' -- Hungup 'Zap/4-1' ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] hangup lag causing the answering of already answered calls
http://www.voip-info.org/wiki/index.php?page=Australia%20Asterisk% 20Details Stumbled across this Reverse On Idle Condition (ROIC) 'feature' that sounds very promising. Will get it enabled later today and give it a go. On Tue, 2006-06-20 at 23:35 +1000, Carey O'Shea wrote: Well I've found out what was causing my duplicate logging: it was entirely a NAT issue. Found out it was only happening on some remote endpoints (and not all of them), and that different routers proved to not have duplicate logging. What part of NAT could cause this? Was it really sending all packets twice, or something like that? Just seems kinda strange. Anyway, it's no longer a problem. My original problem, however, remains. Phone doesn't stop ringing when it's meant to. Only happens when call is via my ZapATA. Any ideas/help/input is appreciated! Regards, Carey. On Sun, 2006-06-11 at 15:18 +1000, Carey O'Shea wrote: Does anyone have any ideas as to what can cause this large delay to stop ringing? It's quite a show stopper... imagine ringing a business and being answered by 3 different people, one after the other, all talking over the top of each other. On Fri, 2006-06-09 at 15:12 +1000, Carey O'Shea wrote: Hi Undrhil, A logical idea, but unfortunately adding it didn't change anything. Two important points: (1) When I test this with just IAX endpoints, no Zap, the call is hungup immediately, (2) but the console still shows the user being called twice. So as a wild guess, maybe the console logging twice is OK, and it's my Zap configuration? * extensions.conf: [incoming] exten = s,1,Dial(IAX2/carey) exten = s,2,Hangup(IAX2/carey) * zapata.conf: [channels] usecallerid=no signalling=fxs_ks context=incoming channel = 4 * zaptel.conf loadzone=au defaultzone=au fxsks=4 * ztcfg -vv Channel 04: FXS Kewlstart (Default) (Slaves: 04) 1 channels configured. I'm from Australia so I assume the loadzone and defaultzone is OK as per zaptel.c. Did not post iax.conf due to my SIP phones having the same behaviour, and IAX-to-IAX not exhibiting the problem. On Fri, 2006-06-09 at 04:54 +, [EMAIL PROTECTED] wrote: So, your dialplan for that incoming call is just the one line? exten = s,1,Dial(IAX2/carey) Nothing else? Try adding a Hangup command on the next priority and see if that helps any. exten = s,2,Hangup If you already have a Hangup command in there, then I apologize for wasting your time. :) Undrhil --- Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com wrote: I have a TDM-400P with one FXO module. On an incoming call, I have set Asterisk to dial my phone (exten = s,1,Dial(IAX2/carey)), which is basically the only thing in my dialplan. When the call is answered by the PSTN phone first, or when the ringing call is hung up, Asterisk keeps ringing for 5+ seconds, which causes trouble (the answering of already answered calls). I noticed in the Asterisk console that my phone is called twice every time there is an incoming call. Is this normal, and could it be causing this behaviour? If not, any ideas as to what could be causing this? I can provide full debug logs and my relevant configuration if needed. Console log: -- Starting simple switch on 'Zap/4-1' -- Executing Dial(Zap/4-1, IAX2/carey) in new stack -- Called carey -- Starting simple switch on 'Zap/4-1' -- Executing Dial(Zap/4-1, IAX2/carey) in new stack -- Called carey -- Call accepted by 10.0.12.102 (format ulaw) -- Format for call is ulaw -- Call accepted by 10.0.12.102 (format ulaw) -- Format for call is ulaw -- IAX2/carey-1 is ringing -- IAX2/carey-1 is ringing -- Hungup 'IAX2/carey-1' == Spawn extension (incoming, s, 1) exited non-zero on 'Zap/4-1' -- Hungup 'Zap/4-1' -- Hungup 'IAX2/carey-1' == Spawn extension (incoming, s, 1) exited non-zero on 'Zap/4-1' -- Hungup 'Zap/4-1' ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and
Re: [Asterisk-Users] hangup lag causing the answering of already answered calls
I'm having the exact same problem. Please any ideas? My IP phones keep ringing after PSTN hangup or PSTN answer... for about 6 or 7 seconds.On Sun, 2006-06-11 at 15:18 +1000, Carey O'Shea wrote: Does anyone have any ideas as to what can cause this large delay to stopringing?It's quite a show stopper... imagine ringing a business and beinganswered by 3 different people, one after the other, all talking overthe top of each other.On Fri, 2006-06-09 at 15:12 +1000, Carey O'Shea wrote: Hi Undrhil, A logical idea, but unfortunately adding it didn't change anything.
Two important points: (1) When I test this with just IAX endpoints, no Zap, the call is hungup immediately, (2) but the console still shows the user being called twice. So as a wild guess, maybe the console logging twice is OK, and it's my Zap configuration? * extensions.conf: [incoming] exten = s,1,Dial(IAX2/carey) exten = s,2,Hangup(IAX2/carey) * zapata.conf: [channels] usecallerid=no signalling=fxs_ks context=incoming channel = 4 * zaptel.conf loadzone=au defaultzone=au fxsks=4 * ztcfg -vv Channel 04: FXS Kewlstart (Default) (Slaves: 04) 1 channels configured. I'm from Australia so I assume the loadzone and defaultzone is OK as per zaptel.c. Did not post iax.conf due to my SIP phones having the same behaviour, and IAX-to-IAX not exhibiting the problem. On Fri, 2006-06-09 at 04:54 +, [EMAIL PROTECTED] wrote: So, your dialplan for that incoming call is just the one line?exten = s,1,Dial(IAX2/carey)Nothing else? Try adding a Hangup command on the next priority and see if that helps any.exten = s,2,HangupIf you already have a Hangup command in there,
then I apologize for wasting your time. :)Undrhil--- Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com wrote: I have a TDM-400P with one FXO module. On an incoming call, I have set Asterisk to dial my phone (exten = s,1,Dial(IAX2/carey)), which is basically the only thing in my dialplan. When the
call is answered by the PSTN phone first, or when the ringing call is hung up, Asterisk keeps ringing for 5+ seconds, which causes trouble (the answering of already answered calls). I noticed in the Asterisk console that my phone is called twice every time there is an incoming call. Is this normal, and could it be causing this behaviour? If not, any ideas
as to what could be causing this? I can provide full debug logs and my relevant configuration if needed. Console log: -- Starting simple switch on 'Zap/4-1' -- Executing Dial("Zap/4-1", "IAX2/carey") in new stack -- Called carey -- Starting simple switch on 'Zap/4-1' -- Executing Dial("Zap/4-1", "IAX2/carey") in new stack
-- Called carey -- Call accepted by 10.0.12.102 (format ulaw) -- Format for call is ulaw -- Call accepted by 10.0.12.102 (format ulaw)-- Format for call is ulaw -- IAX2/carey-1 is ringing -- IAX2/carey-1 is ringing -- Hungup 'IAX2/carey-1' == Spawn extension (incoming, s, 1) exited non-zero on 'Zap/4-1' -- Hungup
'Zap/4-1' -- Hungup 'IAX2/carey-1' == Spawn extension (incoming, s, 1) exited non-zero on 'Zap/4-1' -- Hungup 'Zap/4-1' On Sun, 2006-06-11 at 15:18 +1000, Carey O'Shea wrote: Does anyone have any ideas as to what can cause this large delay to stopringing?It's quite a show stopper... imagine ringing a business and beinganswered by 3 different people, one after the other, all talking overthe top of each other.On Fri, 2006-06-09 at 15:12 +1000, Carey O'Shea
wrote: Hi Undrhil, A logical idea, but unfortunately adding it didn't change anything. Two important points: (1) When I test this with just IAX endpoints, no Zap, the call is hungup immediately, (2) but the console still shows the user being called twice. So as a wild guess, maybe the console logging twice is OK, and it's my Zap configuration? * extensions.conf: [incoming] exten = s,1,Dial(IAX2/carey) exten = s,2,Hangup(IAX2/carey) * zapata.conf: [channels] usecallerid=no signalling=fxs_ks context=incoming channel = 4 * zaptel.conf loadzone=au defaultzone=au fxsks=4 * ztcfg -vv Channel 04: FXS Kewlstart (Default) (Slaves: 04) 1 channels configured. I'm from Australia so I assume the
loadzone and defaultzone is OK as per zaptel.c. Did not post iax.conf due to my SIP phones having the same behaviour, and IAX-to-IAX not exhibiting the problem. On Fri, 2006-06-09 at 04:54 +, [EMAIL PROTECTED] wrote: So, your dialplan for that incoming call is just the one line?exten = s,1,Dial(IAX2/carey)Nothing else? Try adding a Hangup command on the next priority and see if that helps any.exten = s,2,HangupIf you already have a Hangup command in there, then I apologize for wasting your time. :)Undrhil--- Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com wrote: I
Re: [Asterisk-Users] hangup lag causing the answering of already answered calls
Does anyone have any ideas as to what can cause this large delay to stop ringing? It's quite a show stopper... imagine ringing a business and being answered by 3 different people, one after the other, all talking over the top of each other. On Fri, 2006-06-09 at 15:12 +1000, Carey O'Shea wrote: Hi Undrhil, A logical idea, but unfortunately adding it didn't change anything. Two important points: (1) When I test this with just IAX endpoints, no Zap, the call is hungup immediately, (2) but the console still shows the user being called twice. So as a wild guess, maybe the console logging twice is OK, and it's my Zap configuration? * extensions.conf: [incoming] exten = s,1,Dial(IAX2/carey) exten = s,2,Hangup(IAX2/carey) * zapata.conf: [channels] usecallerid=no signalling=fxs_ks context=incoming channel = 4 * zaptel.conf loadzone=au defaultzone=au fxsks=4 * ztcfg -vv Channel 04: FXS Kewlstart (Default) (Slaves: 04) 1 channels configured. I'm from Australia so I assume the loadzone and defaultzone is OK as per zaptel.c. Did not post iax.conf due to my SIP phones having the same behaviour, and IAX-to-IAX not exhibiting the problem. On Fri, 2006-06-09 at 04:54 +, [EMAIL PROTECTED] wrote: So, your dialplan for that incoming call is just the one line? exten = s,1,Dial(IAX2/carey) Nothing else? Try adding a Hangup command on the next priority and see if that helps any. exten = s,2,Hangup If you already have a Hangup command in there, then I apologize for wasting your time. :) Undrhil --- Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com wrote: I have a TDM-400P with one FXO module. On an incoming call, I have set Asterisk to dial my phone (exten = s,1,Dial(IAX2/carey)), which is basically the only thing in my dialplan. When the call is answered by the PSTN phone first, or when the ringing call is hung up, Asterisk keeps ringing for 5+ seconds, which causes trouble (the answering of already answered calls). I noticed in the Asterisk console that my phone is called twice every time there is an incoming call. Is this normal, and could it be causing this behaviour? If not, any ideas as to what could be causing this? I can provide full debug logs and my relevant configuration if needed. Console log: -- Starting simple switch on 'Zap/4-1' -- Executing Dial(Zap/4-1, IAX2/carey) in new stack -- Called carey -- Starting simple switch on 'Zap/4-1' -- Executing Dial(Zap/4-1, IAX2/carey) in new stack -- Called carey -- Call accepted by 10.0.12.102 (format ulaw) -- Format for call is ulaw -- Call accepted by 10.0.12.102 (format ulaw) -- Format for call is ulaw -- IAX2/carey-1 is ringing -- IAX2/carey-1 is ringing -- Hungup 'IAX2/carey-1' == Spawn extension (incoming, s, 1) exited non-zero on 'Zap/4-1' -- Hungup 'Zap/4-1' -- Hungup 'IAX2/carey-1' == Spawn extension (incoming, s, 1) exited non-zero on 'Zap/4-1' -- Hungup 'Zap/4-1' ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] hangup lag causing the answering of already answered calls
So, your dialplan for that incoming call is just the one line? exten = s,1,Dial(IAX2/carey) Nothing else? Try adding a Hangup command on the next priority and see if that helps any. exten = s,2,Hangup If you already have a Hangup command in there, then I apologize for wasting your time. :) Undrhil --- Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com wrote: I have a TDM-400P with one FXO module. On an incoming call, I have set Asterisk to dial my phone (exten = s,1,Dial(IAX2/carey)), which is basically the only thing in my dialplan. When the call is answered by the PSTN phone first, or when the ringing call is hung up, Asterisk keeps ringing for 5+ seconds, which causes trouble (the answering of already answered calls). I noticed in the Asterisk console that my phone is called twice every time there is an incoming call. Is this normal, and could it be causing this behaviour? If not, any ideas as to what could be causing this? I can provide full debug logs and my relevant configuration if needed. Console log: -- Starting simple switch on 'Zap/4-1' -- Executing Dial(Zap/4-1, IAX2/carey) in new stack -- Called carey -- Starting simple switch on 'Zap/4-1' -- Executing Dial(Zap/4-1, IAX2/carey) in new stack -- Called carey -- Call accepted by 10.0.12.102 (format ulaw) -- Format for call is ulaw -- Call accepted by 10.0.12.102 (format ulaw) -- Format for call is ulaw -- IAX2/carey-1 is ringing -- IAX2/carey-1 is ringing -- Hungup 'IAX2/carey-1' == Spawn extension (incoming, s, 1) exited non-zero on 'Zap/4-1' -- Hungup 'Zap/4-1' -- Hungup 'IAX2/carey-1' == Spawn extension (incoming, s, 1) exited non-zero on 'Zap/4-1' -- Hungup 'Zap/4-1' ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] hangup lag causing the answering of already answered calls
Hi Undrhil, A logical idea, but unfortunately adding it didn't change anything. Two important points: (1) When I test this with just IAX endpoints, no Zap, the call is hungup immediately, (2) but the console still shows the user being called twice. So as a wild guess, maybe the console logging twice is OK, and it's my Zap configuration? * extensions.conf: [incoming] exten = s,1,Dial(IAX2/carey) exten = s,2,Hangup(IAX2/carey) * zapata.conf: [channels] usecallerid=no signalling=fxs_ks context=incoming channel = 4 * zaptel.conf loadzone=au defaultzone=au fxsks=4 * ztcfg -vv Channel 04: FXS Kewlstart (Default) (Slaves: 04) 1 channels configured. I'm from Australia so I assume the loadzone and defaultzone is OK as per zaptel.c. Did not post iax.conf due to my SIP phones having the same behaviour, and IAX-to-IAX not exhibiting the problem. On Fri, 2006-06-09 at 04:54 +, [EMAIL PROTECTED] wrote: So, your dialplan for that incoming call is just the one line? exten = s,1,Dial(IAX2/carey) Nothing else? Try adding a Hangup command on the next priority and see if that helps any. exten = s,2,Hangup If you already have a Hangup command in there, then I apologize for wasting your time. :) Undrhil --- Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com wrote: I have a TDM-400P with one FXO module. On an incoming call, I have set Asterisk to dial my phone (exten = s,1,Dial(IAX2/carey)), which is basically the only thing in my dialplan. When the call is answered by the PSTN phone first, or when the ringing call is hung up, Asterisk keeps ringing for 5+ seconds, which causes trouble (the answering of already answered calls). I noticed in the Asterisk console that my phone is called twice every time there is an incoming call. Is this normal, and could it be causing this behaviour? If not, any ideas as to what could be causing this? I can provide full debug logs and my relevant configuration if needed. Console log: -- Starting simple switch on 'Zap/4-1' -- Executing Dial(Zap/4-1, IAX2/carey) in new stack -- Called carey -- Starting simple switch on 'Zap/4-1' -- Executing Dial(Zap/4-1, IAX2/carey) in new stack -- Called carey -- Call accepted by 10.0.12.102 (format ulaw) -- Format for call is ulaw -- Call accepted by 10.0.12.102 (format ulaw) -- Format for call is ulaw -- IAX2/carey-1 is ringing -- IAX2/carey-1 is ringing -- Hungup 'IAX2/carey-1' == Spawn extension (incoming, s, 1) exited non-zero on 'Zap/4-1' -- Hungup 'Zap/4-1' -- Hungup 'IAX2/carey-1' == Spawn extension (incoming, s, 1) exited non-zero on 'Zap/4-1' -- Hungup 'Zap/4-1' ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
