Re: [asterisk-users] A200 card problem
FYI, here's the result from Sangoma... -t- Hi Todd, It’s look like issue with your power supply. It’s not providing enough power to the FXS module. Make sure that power cable is connected properly to the A200 main board. You can try to swap the power cable from CD/DVD ROM for temporary testing. You can find this information at http://wiki.sangoma.com/sangoma-hardware#A200 . I have also added signaling method for channels in your /etc/ asterisk/zapata.conf . I received following error in your /var/log/messages Mar 16 19:43:39 asterisk1 kernel: wanpipe1: Module 2: TIP/RING is too low on FXS 0! Mar 16 19:44:11 asterisk1 last message repeated 2 times Mar 16 19:44:44 asterisk1 last message repeated 2 times Mar 16 19:44:44 asterisk1 kernel: wanpipe1: Module 2: FXS failed! Mar 16 19:45:13 asterisk1 kernel: wanpipe1: Module 3: TIP/RING is too low on FXS 0! Best regards, On Mar 15, 2007, at 4:38 PM, Todd H wrote: Hi - I just got an A200 card with 1 FXO and 1 FXS module. Sadly, I can't make it work- currently, asterisk will not startup because of a bad module. Below are some log files/config files. If anyone has any suggestions, I'd appreciate it. I used Trixbox 2.0 and followed instructions on (http:// sangoma.editme.com/wanpipe-linux-asterisk-atHome) - no problems running through or compiling. I also downloaded trixbox 2.0 with sangoma drivers included directly from sangoma (http:// wiki.sangoma.com/Trixbox-1xx). I know how this list feels about trixbox, but still, the card/configs are the same, no? Any advice is appreciated. thanks Todd +++ /var/log/asterisk/full Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_mgcp.so]Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_mgcp.so] => (Media Gateway Control Protocol (MGCP)) Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_local.so]Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_local.so] => (Local Proxy Channel) Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_phone.so]Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_phone.so] => (Linux Telephony API Support) Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_zap.so]Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_zap.so] => (Zapata Telephony w/PRI) Mar 15 16:12:37 WARNING[31964] chan_zap.c: Unable to specify channel 1: No such device or address Mar 15 16:12:37 ERROR[31964] chan_zap.c: Unable to open channel 1: No such device or address here = 0, tmp->channel = 1, channel = 1 Mar 15 16:12:37 ERROR[31964] chan_zap.c: Unable to register channel '1' Mar 15 16:12:37 WARNING[31964] loader.c: chan_zap.so: load_module failed, returning -1 Mar 15 16:12:37 WARNING[31964] loader.c: Loading module chan_zap.so failed! [EMAIL PROTECTED] ~]# +++ END /var/log/asterisk/full +++ /var/log/messages [EMAIL PROTECTED] ~]# tail -20 /var/log/messages Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_config.so] => (Text Extension Configuration) Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_functions.so] => (Builtin dialplan functions) Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_ael.so] => (Asterisk Extension Language Compiler) Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_dundi.so] => (Distributed Universal Number Discovery (DUNDi)) Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_loopback.so] => (Loopback Switch) Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_spool.so] => (Outgoing Spool Support) Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_iax2.so] => (Inter Asterisk eXchange (Ver 2)) Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_agent.so] => (Agent Proxy Channel) Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_skinny.so] => (Skinny Client Control Protocol (Skinny)) Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_h323.so] => (Objective Systems H323 Channel) Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_sip.so] => (Session Initiation Protocol (SIP)) Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_features.so] => (Feature Proxy Channel) Mar 15 16:24:08 asterisk1 safe_asterisk: [skipping chan_oss.so] Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_mgcp.so] => (Media Gateway Control Protocol (MGCP)) Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_local.so] => (Local Proxy Channel) Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_phone.so] => (Linux Telephony API Support) Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_zap.so] => (Zapata Telephony w/PRI) Mar 15 16:24:08 asterisk1 safe_asterisk: Asterisk died with code 1. Mar 15 16:24:08 asterisk1 safe_asterisk: Automatically restarting Asterisk. Mar 15 16:24:08 asterisk1 asterisk: safe_asterisk startup succeeded [EMAIL PROTECTED] ~]# +++ END /var/log/messages ++/etc/zaptel.conf+++ [EMAIL PROTECTED] ~]# more /etc/zaptel.conf # Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not hand edit # Zaptel Channels Con
Re: [asterisk-users] A200 card problem
Exactly, Sangoma support is THE BEST! :) Best Regards Josué 2007/3/15, John Novack <[EMAIL PROTECTED]>: Sangoma gives excellent support Suggest you try there first They probably will want SSH access to the box. Send them an e-mail John Novack Todd H wrote: > Hi - > I just got an A200 card with 1 FXO and 1 FXS module. Sadly, I can't > make it work- currently, asterisk will not startup because of a bad > module. Below are some log files/config files. If anyone has any > suggestions, I'd appreciate it. > > I used Trixbox 2.0 and followed instructions on > (http://sangoma.editme.com/wanpipe-linux-asterisk-atHome) - no > problems running through or compiling. I also downloaded trixbox > 2.0 with sangoma drivers included directly from sangoma > (http://wiki.sangoma.com/Trixbox-1xx). I know how this list feels > about trixbox, but still, the card/configs are the same, no? Any > advice is appreciated. > thanks > Todd > > +++ /var/log/asterisk/full > Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_mgcp.so]Mar 15 > 16:12:37 VERBOSE[31964] logger.c: [chan_mgcp.so] => (Media Gateway > Control Protocol (MGCP)) > Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_local.so]Mar 15 > 16:12:37 VERBOSE[31964] logger.c: [chan_local.so] => (Local Proxy > Channel) > Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_phone.so]Mar 15 > 16:12:37 VERBOSE[31964] logger.c: [chan_phone.so] => (Linux Telephony > API Support) > Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_zap.so]Mar 15 16:12:37 > VERBOSE[31964] logger.c: [chan_zap.so] => (Zapata Telephony w/PRI) > Mar 15 16:12:37 WARNING[31964] chan_zap.c: Unable to specify channel > 1: No such device or address > Mar 15 16:12:37 ERROR[31964] chan_zap.c: Unable to open channel 1: No > such device or address > here = 0, tmp->channel = 1, channel = 1 > Mar 15 16:12:37 ERROR[31964] chan_zap.c: Unable to register channel '1' > Mar 15 16:12:37 WARNING[31964] loader.c: chan_zap.so: load_module > failed, returning -1 > Mar 15 16:12:37 WARNING[31964] loader.c: Loading module chan_zap.so > failed! > [EMAIL PROTECTED] ~]# > +++ END /var/log/asterisk/full > > +++ /var/log/messages > [EMAIL PROTECTED] ~]# tail -20 /var/log/messages > Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_config.so] => (Text > Extension Configuration) > Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_functions.so] => > (Builtin dialplan functions) > Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_ael.so] => (Asterisk > Extension Language Compiler) > Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_dundi.so] => > (Distributed Universal Number Discovery (DUNDi)) > Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_loopback.so] => > (Loopback Switch) > Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_spool.so] => (Outgoing > Spool Support) > Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_iax2.so] => (Inter > Asterisk eXchange (Ver 2)) > Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_agent.so] => (Agent > Proxy Channel) > Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_skinny.so] => (Skinny > Client Control Protocol (Skinny)) > Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_h323.so] => (Objective > Systems H323 Channel) > Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_sip.so] => (Session > Initiation Protocol (SIP)) > Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_features.so] => > (Feature Proxy Channel) > Mar 15 16:24:08 asterisk1 safe_asterisk: [skipping chan_oss.so] > Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_mgcp.so] => (Media > Gateway Control Protocol (MGCP)) > Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_local.so] => (Local > Proxy Channel) > Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_phone.so] => (Linux > Telephony API Support) > Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_zap.so] => (Zapata > Telephony w/PRI) > Mar 15 16:24:08 asterisk1 safe_asterisk: Asterisk died with code 1. > Mar 15 16:24:08 asterisk1 safe_asterisk: Automatically restarting > Asterisk. > Mar 15 16:24:08 asterisk1 asterisk: safe_asterisk startup succeeded > [EMAIL PROTECTED] ~]# > +++ END /var/log/messages > > > ++/etc/zaptel.conf+++ > [EMAIL PROTECTED] ~]# more /etc/zaptel.conf > # Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not > hand edit > # Zaptel Channels Configurations (zaptel.conf) > # > loadzone=us > defaultzone=us > > # Sangoma A200 [slot:9 bus:1 span: 1] > fxsks=1 > fxsks=2 > fxoks=3 > fxoks=4 > [EMAIL PROTECTED] ~]# > ++END /etc/zaptel.conf+++ > > ++/etc/asterisk/zapata.conf+++ > [EMAIL PROTECTED] asterisk]# more zapata.conf > ; > ; Zapata telephony interface > ; > ; Configuration file > > [trunkgroups] > > [channels] > > language=en > context=from-zaptel > signalling=fxs_ks > rxwink=300 ; Atlas seems to use long (250ms) winks > ; > ; Whether or not to do distinctiv
Re: [asterisk-users] A200 card problem
Sangoma gives excellent support Suggest you try there first They probably will want SSH access to the box. Send them an e-mail John Novack Todd H wrote: Hi - I just got an A200 card with 1 FXO and 1 FXS module. Sadly, I can't make it work- currently, asterisk will not startup because of a bad module. Below are some log files/config files. If anyone has any suggestions, I'd appreciate it. I used Trixbox 2.0 and followed instructions on (http://sangoma.editme.com/wanpipe-linux-asterisk-atHome) - no problems running through or compiling. I also downloaded trixbox 2.0 with sangoma drivers included directly from sangoma (http://wiki.sangoma.com/Trixbox-1xx). I know how this list feels about trixbox, but still, the card/configs are the same, no? Any advice is appreciated. thanks Todd +++ /var/log/asterisk/full Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_mgcp.so]Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_mgcp.so] => (Media Gateway Control Protocol (MGCP)) Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_local.so]Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_local.so] => (Local Proxy Channel) Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_phone.so]Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_phone.so] => (Linux Telephony API Support) Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_zap.so]Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_zap.so] => (Zapata Telephony w/PRI) Mar 15 16:12:37 WARNING[31964] chan_zap.c: Unable to specify channel 1: No such device or address Mar 15 16:12:37 ERROR[31964] chan_zap.c: Unable to open channel 1: No such device or address here = 0, tmp->channel = 1, channel = 1 Mar 15 16:12:37 ERROR[31964] chan_zap.c: Unable to register channel '1' Mar 15 16:12:37 WARNING[31964] loader.c: chan_zap.so: load_module failed, returning -1 Mar 15 16:12:37 WARNING[31964] loader.c: Loading module chan_zap.so failed! [EMAIL PROTECTED] ~]# +++ END /var/log/asterisk/full +++ /var/log/messages [EMAIL PROTECTED] ~]# tail -20 /var/log/messages Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_config.so] => (Text Extension Configuration) Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_functions.so] => (Builtin dialplan functions) Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_ael.so] => (Asterisk Extension Language Compiler) Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_dundi.so] => (Distributed Universal Number Discovery (DUNDi)) Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_loopback.so] => (Loopback Switch) Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_spool.so] => (Outgoing Spool Support) Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_iax2.so] => (Inter Asterisk eXchange (Ver 2)) Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_agent.so] => (Agent Proxy Channel) Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_skinny.so] => (Skinny Client Control Protocol (Skinny)) Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_h323.so] => (Objective Systems H323 Channel) Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_sip.so] => (Session Initiation Protocol (SIP)) Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_features.so] => (Feature Proxy Channel) Mar 15 16:24:08 asterisk1 safe_asterisk: [skipping chan_oss.so] Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_mgcp.so] => (Media Gateway Control Protocol (MGCP)) Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_local.so] => (Local Proxy Channel) Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_phone.so] => (Linux Telephony API Support) Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_zap.so] => (Zapata Telephony w/PRI) Mar 15 16:24:08 asterisk1 safe_asterisk: Asterisk died with code 1. Mar 15 16:24:08 asterisk1 safe_asterisk: Automatically restarting Asterisk. Mar 15 16:24:08 asterisk1 asterisk: safe_asterisk startup succeeded [EMAIL PROTECTED] ~]# +++ END /var/log/messages ++/etc/zaptel.conf+++ [EMAIL PROTECTED] ~]# more /etc/zaptel.conf # Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not hand edit # Zaptel Channels Configurations (zaptel.conf) # loadzone=us defaultzone=us # Sangoma A200 [slot:9 bus:1 span: 1] fxsks=1 fxsks=2 fxoks=3 fxoks=4 [EMAIL PROTECTED] ~]# ++END /etc/zaptel.conf+++ ++/etc/asterisk/zapata.conf+++ [EMAIL PROTECTED] asterisk]# more zapata.conf ; ; Zapata telephony interface ; ; Configuration file [trunkgroups] [channels] language=en context=from-zaptel signalling=fxs_ks rxwink=300 ; Atlas seems to use long (250ms) winks ; ; Whether or not to do distinctive ring detection on FXO lines ; ;usedistinctiveringdetection=yes usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=no echotraining=800 rxgain=0