Re: [asterisk-users] T1 Card RED ALARM
Since there are a number of setting that could be causing the alarm, AMI/B8ZS, SF/ESF, etc... Start with a loop-test, make sure the card can communicate with itself (using the current settings). Connect the following pins: 01 (RX-) -- 04 (TX+) 02 (RX+) -- 05 (TX-) Sincerely, Brian LaVallee On 6/25/14, 1:16 PM, arun kumar wrote: Cables are workig fine in my other box. On 25 Jun 2014 00:46, Steve Totaro stot...@totarotechnologies.com wrote: Remember to always check your cables first. Thanks, Steve T On Tue, Jun 24, 2014 at 1:47 PM, arun kumar arunvsadni...@gmail.com wrote: Thank you Josh for your valuable reply. I will do try changing the server and let you know what happening. ~Arun On Tue, Jun 24, 2014 at 8:39 PM, Josh Metzger joshdmetz...@gmail.com wrote: On Tue, Jun 24, 2014 at 5:25 AM, arun kumar arunvsadni...@gmail.com wrote: Hello All, I have a Digium Wildcard TE410P Quad-Span T1 Card, when I do connect T1 lines it goes in RED. When I do connect the same line on a different Server (Same Model T1 Card) it works fine. How do I examine/diagnose my T1 Card for any hardware failures. I heard about loopback test , how helpful it is? Here are my configuration /etc/zaptel.conf span=1,1,0,esf,b8zs bchan=1-23 dchan=24 Zaptel Configuration == SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) 24 channels configured Thanks ~Arun It could still be some sort of system config issue, even if you think everything is configured the same. Have you tried moving the T1 card from the Bad system to the good system? That will at least help narrow down if it's a bad card / port, or a config issue. -Josh -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] T1 Card RED ALARM
On Tue, Jun 24, 2014 at 5:25 AM, arun kumar arunvsadni...@gmail.com wrote: Hello All, I have a Digium Wildcard TE410P Quad-Span T1 Card, when I do connect T1 lines it goes in RED. When I do connect the same line on a different Server (Same Model T1 Card) it works fine. How do I examine/diagnose my T1 Card for any hardware failures. I heard about loopback test , how helpful it is? Here are my configuration /etc/zaptel.conf span=1,1,0,esf,b8zs bchan=1-23 dchan=24 Zaptel Configuration == SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) 24 channels configured Thanks ~Arun It could still be some sort of system config issue, even if you think everything is configured the same. Have you tried moving the T1 card from the Bad system to the good system? That will at least help narrow down if it's a bad card / port, or a config issue. -Josh -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] T1 Card RED ALARM
Thank you Josh for your valuable reply. I will do try changing the server and let you know what happening. ~Arun On Tue, Jun 24, 2014 at 8:39 PM, Josh Metzger joshdmetz...@gmail.com wrote: On Tue, Jun 24, 2014 at 5:25 AM, arun kumar arunvsadni...@gmail.com wrote: Hello All, I have a Digium Wildcard TE410P Quad-Span T1 Card, when I do connect T1 lines it goes in RED. When I do connect the same line on a different Server (Same Model T1 Card) it works fine. How do I examine/diagnose my T1 Card for any hardware failures. I heard about loopback test , how helpful it is? Here are my configuration /etc/zaptel.conf span=1,1,0,esf,b8zs bchan=1-23 dchan=24 Zaptel Configuration == SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) 24 channels configured Thanks ~Arun It could still be some sort of system config issue, even if you think everything is configured the same. Have you tried moving the T1 card from the Bad system to the good system? That will at least help narrow down if it's a bad card / port, or a config issue. -Josh -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] T1 Card RED ALARM
Remember to always check your cables first. Thanks, Steve T On Tue, Jun 24, 2014 at 1:47 PM, arun kumar arunvsadni...@gmail.com wrote: Thank you Josh for your valuable reply. I will do try changing the server and let you know what happening. ~Arun On Tue, Jun 24, 2014 at 8:39 PM, Josh Metzger joshdmetz...@gmail.com wrote: On Tue, Jun 24, 2014 at 5:25 AM, arun kumar arunvsadni...@gmail.com wrote: Hello All, I have a Digium Wildcard TE410P Quad-Span T1 Card, when I do connect T1 lines it goes in RED. When I do connect the same line on a different Server (Same Model T1 Card) it works fine. How do I examine/diagnose my T1 Card for any hardware failures. I heard about loopback test , how helpful it is? Here are my configuration /etc/zaptel.conf span=1,1,0,esf,b8zs bchan=1-23 dchan=24 Zaptel Configuration == SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) 24 channels configured Thanks ~Arun It could still be some sort of system config issue, even if you think everything is configured the same. Have you tried moving the T1 card from the Bad system to the good system? That will at least help narrow down if it's a bad card / port, or a config issue. -Josh -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] T1 Card RED ALARM
Why you configure zaptel.conf? should configure on dahdi files Mc GRATH Ricardo E-Mail mcgra...@mail2web.com -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] T1 Card RED ALARM
Cables are workig fine in my other box. On 25 Jun 2014 00:46, Steve Totaro stot...@totarotechnologies.com wrote: Remember to always check your cables first. Thanks, Steve T On Tue, Jun 24, 2014 at 1:47 PM, arun kumar arunvsadni...@gmail.com wrote: Thank you Josh for your valuable reply. I will do try changing the server and let you know what happening. ~Arun On Tue, Jun 24, 2014 at 8:39 PM, Josh Metzger joshdmetz...@gmail.com wrote: On Tue, Jun 24, 2014 at 5:25 AM, arun kumar arunvsadni...@gmail.com wrote: Hello All, I have a Digium Wildcard TE410P Quad-Span T1 Card, when I do connect T1 lines it goes in RED. When I do connect the same line on a different Server (Same Model T1 Card) it works fine. How do I examine/diagnose my T1 Card for any hardware failures. I heard about loopback test , how helpful it is? Here are my configuration /etc/zaptel.conf span=1,1,0,esf,b8zs bchan=1-23 dchan=24 Zaptel Configuration == SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) 24 channels configured Thanks ~Arun It could still be some sort of system config issue, even if you think everything is configured the same. Have you tried moving the T1 card from the Bad system to the good system? That will at least help narrow down if it's a bad card / port, or a config issue. -Josh -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] T1 Card RED ALARM
Its an old box with Asterisk 1.2 On 25 Jun 2014 03:46, Mc GRATH Ricardo mcgra...@mail2web.com wrote: Why you configure zaptel.conf? should configure on dahdi files Mc GRATH Ricardo E-Mail mcgra...@mail2web.com -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users