RE: [asterisk-users] X100P clone not working
dmesg | grep x100p also im almost positive(correct me if im wrong anyone) you do NOT need ztdummy i repeat, do NOT need ztdummy with x100p then rmmod zaptel && rmmod wctdm && modprobe zaptel && modprobe wctdm or wctfxo or w/e let me know how this works out (post the section for your x100p from zaptel.conf and zapata.conf if you could m8) Hi, I have problem to set up an X100P clone card. Installation of zaptel was successful. Also modprobe of zaptel, ztdummy and wcfxo without problems. kernel: wcfxo: module not supported by Novell, setting U taint flag. kernel: ACPI: PCI Interrupt :05:04.0[A] -> GSI 16 (level, low) -> IRQ 193 kernel: wcfxo: DAA mode is 'FCC' kernel: Found a Wildcard FXO: Generic Clone kernel: Registered tone zone 0 (United States / North America) But if I do #ztcfg -vvv no channels will be found. the log file reports me: kernel: Registered tone zone 0 (United States / North America) Iam quite sure that zaptel.conf is correct. fxsks=1 loadzone=us defaultzone=us So Iam not sure what happened here, I have found that this clone as used by many others, so it should work. thanks best regards Frank ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _ Express yourself instantly with MSN Messenger! Download today - it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] X100P clone not working
Hi, i tried w/o ztdummy but nothing changed. any ideas? zaptel.conf -- fxsks=1 loadzone=us defaultzone=us zapata.conf [channels] language=en context=incoming signalling=fxs_ks usecallerid=yes echocancle=yes transfer=yes echocanclewhenbridged=yes channel => 1 # modprobe zaptel && modprobe wcfxo kernel: zaptel: module not supported by Novell, setting U taint flag. kernel: Zapata Telephony Interface Registered on major 196 kernel: Zaptel Version: SVN-tag-1.2.6-r1096 Echo Canceller: KB1 kernel: wcfxo: module not supported by Novell, setting U taint flag. kernel: ACPI: PCI Interrupt :05:04.0[A] -> GSI 16 (level, low) -> IRQ 193 kernel: wcfxo: DAA mode is 'FCC' kernel: Found a Wildcard FXO: Generic Clone kernel: Registered tone zone 0 (United States / North America) # lsmod | grep zaptel zaptel201732 1 wcfxo crc_ccitt 2176 1 zaptel # ztcfg -v Zaptel Configuration == 0 channels configured. > dmesg | grep x100p > > also > im almost positive(correct me if im wrong anyone) you do NOT > need ztdummy > i repeat, do NOT need ztdummy with x100p > > then rmmod zaptel && rmmod wctdm && modprobe zaptel && modprobe wctdm > or wctfxo or w/e > > let me know how this works out > (post the section for your x100p from zaptel.conf and zapata.conf if you > could m8) > > >Hi, > > > >I have problem to set up an X100P clone card. > >Installation of zaptel was successful. > >Also modprobe of zaptel, ztdummy and wcfxo without problems. > > > >kernel: wcfxo: module not supported by Novell, setting U taint flag. > >kernel: ACPI: PCI Interrupt :05:04.0[A] -> GSI 16 (level, low) -> IRQ > >193 > >kernel: wcfxo: DAA mode is 'FCC' > >kernel: Found a Wildcard FXO: Generic Clone > >kernel: Registered tone zone 0 (United States / North America) > > > > > >But if I do #ztcfg -vvv no channels will be found. > > > >the log file reports me: kernel: Registered tone zone 0 (United States / > >North > >America) > > > >Iam quite sure that zaptel.conf is correct. > >fxsks=1 > >loadzone=us > >defaultzone=us > > > >So Iam not sure what happened here, I have found that this clone as used > > by many others, so it should work. > > > >thanks > > > >best regards > > > >Frank > >___ > >--Bandwidth and Colocation provided by Easynews.com -- > > > >asterisk-users mailing list > >To UNSUBSCRIBE or update options visit: > >http://lists.digium.com/mailman/listinfo/asterisk-users > > _ > Express yourself instantly with MSN Messenger! Download today - it's FREE! > http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ > > ___ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] X100P clone not working
configs look fine to me it has to be a module problem im guessing try rmmod for zaptel and wctfxo or w/e then modprobing again(must be root) if that does not work(which is does on my system, so i added it into a startup conf) kernel: wcfxo: module not supported by Novell are you sure that wcfxo is the correct module for that device?? hoping to help `KruZ~ From: Frank Darner <[EMAIL PROTECTED]> Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] X100P clone not working Date: Sat, 22 Jul 2006 21:47:03 +0200 MIME-Version: 1.0 Received: from lists.digium.com ([69.16.138.164]) by bay0-mc3-f8.bay0.hotmail.com with Microsoft SMTPSVC(6.0.3790.2444); Sat, 22 Jul 2006 12:48:30 -0700 Received: from digium-69-16-138-164.phx1.puregig.net (localhost [127.0.0.1])by lists.digium.com (Postfix) with ESMTP id 5410F2FC983;Sat, 22 Jul 2006 12:47:07 -0700 (MST) Received: from psmtp.com (exprod8mx18.postini.com [64.18.3.118])by lists.digium.com (Postfix) with SMTP id 6DAB82FC955for ;Sat, 22 Jul 2006 12:47:01 -0700 (MST) Received: from source ([64.233.182.188]) by exprod8mx18.postini.com([64.18.7.10]) with SMTP; Sat, 22 Jul 2006 12:47:01 PDT Received: by nf-out-0910.google.com with SMTP id p48so1178324nfafor ;Sat, 22 Jul 2006 12:47:01 -0700 (PDT) Received: by 10.48.80.20 with SMTP id d20mr1795637nfb;Sat, 22 Jul 2006 12:47:01 -0700 (PDT) Received: from p54BA06B2.dip0.t-ipconnect.de ( [84.186.6.178])by mx.gmail.com with ESMTP id k9sm3536321nfc.2006.07.22.12.47.00;Sat, 22 Jul 2006 12:47:01 -0700 (PDT) X-Message-Info: LsUYwwHHNt3YNIQZusOzLxRY86S1M78tl0qZUvrd8nA= X-Original-To: asterisk-users@lists.digium.com Delivered-To: asterisk-users@lists.digium.com DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=googlemail.com;h=received:to:subject:date:user-agent:references:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:message-id:from;b=f6RdXsFUO93pZRYKfL8kkf1zq7II8QbilI7EIicBctd1pQiFP1oSzU3gqXz4bivjrA/7blsBUpPAviR79NWfa49+Pw0aTIr073H/bQV+Q7VvhfOdlDRNw0QYj+mjXA6AZ5GFGBnlO2OjnhLgMpPjwBX00xkxIE1GXyAJtuF0ZMs= User-Agent: KMail/1.9.3 References: <[EMAIL PROTECTED]> X-pstn-levels: (S:99.9/99.9 FC:95.5390 LC:95.5390 R:95.9108 P:95.9108M:96.8350 C:98.4741 ) X-pstn-settings: 3 (1.:1.) s fc lc gt3 gt2 gt1 r p m c X-pstn-addresses: from <[EMAIL PROTECTED]> [db-null] X-BeenThere: asterisk-users@lists.digium.com X-Mailman-Version: 2.1.5 Precedence: list List-Id: Asterisk Users Mailing List - Non-Commercial Discussion List-Unsubscribe: <http://lists.digium.com/mailman/listinfo/asterisk-users>,<mailto:[EMAIL PROTECTED]> List-Archive: <http://lists.digium.com/pipermail/asterisk-users> List-Post: <mailto:asterisk-users@lists.digium.com> List-Help: <mailto:[EMAIL PROTECTED]> List-Subscribe: <http://lists.digium.com/mailman/listinfo/asterisk-users>,<mailto:[EMAIL PROTECTED]> Errors-To: [EMAIL PROTECTED] Return-Path: [EMAIL PROTECTED] X-OriginalArrivalTime: 22 Jul 2006 19:48:31.0136 (UTC) FILETIME=[CF1A9200:01C6ADC7] Hi, i tried w/o ztdummy but nothing changed. any ideas? zaptel.conf -- fxsks=1 loadzone=us defaultzone=us zapata.conf [channels] language=en context=incoming signalling=fxs_ks usecallerid=yes echocancle=yes transfer=yes echocanclewhenbridged=yes channel => 1 # modprobe zaptel && modprobe wcfxo kernel: zaptel: module not supported by Novell, setting U taint flag. kernel: Zapata Telephony Interface Registered on major 196 kernel: Zaptel Version: SVN-tag-1.2.6-r1096 Echo Canceller: KB1 kernel: wcfxo: module not supported by Novell, setting U taint flag. kernel: ACPI: PCI Interrupt :05:04.0[A] -> GSI 16 (level, low) -> IRQ 193 kernel: wcfxo: DAA mode is 'FCC' kernel: Found a Wildcard FXO: Generic Clone kernel: Registered tone zone 0 (United States / North America) # lsmod | grep zaptel zaptel201732 1 wcfxo crc_ccitt 2176 1 zaptel # ztcfg -v Zaptel Configuration == 0 channels configured. > dmesg | grep x100p > > also > im almost positive(correct me if im wrong anyone) you do NOT > need ztdummy > i repeat, do NOT need ztdummy with x100p > > then rmmod zaptel && rmmod wctdm && modprobe zaptel && modprobe wctdm > or wctfxo or w/e > > let me know how this works out > (post the section for your x100p from zaptel.conf and zapata.conf if you > could m8) > > >Hi, > > > >I have problem to set up an X100P clone card. > >Installation of zaptel was successful. > >Also modprobe of zaptel, ztdummy and wcfxo without problems. > > > >kernel: wcfxo: module not supported by Novell, setting U taint flag. > >kernel: ACPI: PCI Interrupt :05:04.0[A] ->
Re: [asterisk-users] X100P clone not working
here is some more information http://www.voip-info.org/wiki/view/X100P+clone From: Frank Darner <[EMAIL PROTECTED]> Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] X100P clone not working Date: Sat, 22 Jul 2006 21:47:03 +0200 MIME-Version: 1.0 Received: from lists.digium.com ([69.16.138.164]) by bay0-mc3-f8.bay0.hotmail.com with Microsoft SMTPSVC(6.0.3790.2444); Sat, 22 Jul 2006 12:48:30 -0700 Received: from digium-69-16-138-164.phx1.puregig.net (localhost [127.0.0.1])by lists.digium.com (Postfix) with ESMTP id 5410F2FC983;Sat, 22 Jul 2006 12:47:07 -0700 (MST) Received: from psmtp.com (exprod8mx18.postini.com [64.18.3.118])by lists.digium.com (Postfix) with SMTP id 6DAB82FC955for ;Sat, 22 Jul 2006 12:47:01 -0700 (MST) Received: from source ([64.233.182.188]) by exprod8mx18.postini.com([64.18.7.10]) with SMTP; Sat, 22 Jul 2006 12:47:01 PDT Received: by nf-out-0910.google.com with SMTP id p48so1178324nfafor ;Sat, 22 Jul 2006 12:47:01 -0700 (PDT) Received: by 10.48.80.20 with SMTP id d20mr1795637nfb;Sat, 22 Jul 2006 12:47:01 -0700 (PDT) Received: from p54BA06B2.dip0.t-ipconnect.de ( [84.186.6.178])by mx.gmail.com with ESMTP id k9sm3536321nfc.2006.07.22.12.47.00;Sat, 22 Jul 2006 12:47:01 -0700 (PDT) X-Message-Info: LsUYwwHHNt3YNIQZusOzLxRY86S1M78tl0qZUvrd8nA= X-Original-To: asterisk-users@lists.digium.com Delivered-To: asterisk-users@lists.digium.com DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=googlemail.com;h=received:to:subject:date:user-agent:references:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:message-id:from;b=f6RdXsFUO93pZRYKfL8kkf1zq7II8QbilI7EIicBctd1pQiFP1oSzU3gqXz4bivjrA/7blsBUpPAviR79NWfa49+Pw0aTIr073H/bQV+Q7VvhfOdlDRNw0QYj+mjXA6AZ5GFGBnlO2OjnhLgMpPjwBX00xkxIE1GXyAJtuF0ZMs= User-Agent: KMail/1.9.3 References: <[EMAIL PROTECTED]> X-pstn-levels: (S:99.9/99.9 FC:95.5390 LC:95.5390 R:95.9108 P:95.9108M:96.8350 C:98.4741 ) X-pstn-settings: 3 (1.:1.) s fc lc gt3 gt2 gt1 r p m c X-pstn-addresses: from <[EMAIL PROTECTED]> [db-null] X-BeenThere: asterisk-users@lists.digium.com X-Mailman-Version: 2.1.5 Precedence: list List-Id: Asterisk Users Mailing List - Non-Commercial Discussion List-Unsubscribe: <http://lists.digium.com/mailman/listinfo/asterisk-users>,<mailto:[EMAIL PROTECTED]> List-Archive: <http://lists.digium.com/pipermail/asterisk-users> List-Post: <mailto:asterisk-users@lists.digium.com> List-Help: <mailto:[EMAIL PROTECTED]> List-Subscribe: <http://lists.digium.com/mailman/listinfo/asterisk-users>,<mailto:[EMAIL PROTECTED]> Errors-To: [EMAIL PROTECTED] Return-Path: [EMAIL PROTECTED] X-OriginalArrivalTime: 22 Jul 2006 19:48:31.0136 (UTC) FILETIME=[CF1A9200:01C6ADC7] Hi, i tried w/o ztdummy but nothing changed. any ideas? zaptel.conf -- fxsks=1 loadzone=us defaultzone=us zapata.conf [channels] language=en context=incoming signalling=fxs_ks usecallerid=yes echocancle=yes transfer=yes echocanclewhenbridged=yes channel => 1 # modprobe zaptel && modprobe wcfxo kernel: zaptel: module not supported by Novell, setting U taint flag. kernel: Zapata Telephony Interface Registered on major 196 kernel: Zaptel Version: SVN-tag-1.2.6-r1096 Echo Canceller: KB1 kernel: wcfxo: module not supported by Novell, setting U taint flag. kernel: ACPI: PCI Interrupt :05:04.0[A] -> GSI 16 (level, low) -> IRQ 193 kernel: wcfxo: DAA mode is 'FCC' kernel: Found a Wildcard FXO: Generic Clone kernel: Registered tone zone 0 (United States / North America) # lsmod | grep zaptel zaptel201732 1 wcfxo crc_ccitt 2176 1 zaptel # ztcfg -v Zaptel Configuration == 0 channels configured. > dmesg | grep x100p > > also > im almost positive(correct me if im wrong anyone) you do NOT > need ztdummy > i repeat, do NOT need ztdummy with x100p > > then rmmod zaptel && rmmod wctdm && modprobe zaptel && modprobe wctdm > or wctfxo or w/e > > let me know how this works out > (post the section for your x100p from zaptel.conf and zapata.conf if you > could m8) > > >Hi, > > > >I have problem to set up an X100P clone card. > >Installation of zaptel was successful. > >Also modprobe of zaptel, ztdummy and wcfxo without problems. > > > >kernel: wcfxo: module not supported by Novell, setting U taint flag. > >kernel: ACPI: PCI Interrupt :05:04.0[A] -> GSI 16 (level, low) -> IRQ > >193 > >kernel: wcfxo: DAA mode is 'FCC' > >kernel: Found a Wildcard FXO: Generic Clone > >kernel: Registered tone zone 0 (United States / North America) > > > > > >But if I do #ztcfg -vvv no channels will be f
Re: [asterisk-users] X100P clone not working
On Sat, Jul 22, 2006 at 09:02:48PM +0200, Frank Darner wrote: > Hi, > > I have problem to set up an X100P clone card. > Installation of zaptel was successful. > Also modprobe of zaptel, ztdummy and wcfxo without problems. > > kernel: wcfxo: module not supported by Novell, setting U taint flag. > kernel: ACPI: PCI Interrupt :05:04.0[A] -> GSI 16 (level, low) -> IRQ 193 > kernel: wcfxo: DAA mode is 'FCC' > kernel: Found a Wildcard FXO: Generic Clone > kernel: Registered tone zone 0 (United States / North America) > > > But if I do #ztcfg -vvv no channels will be found. What is the exact output from that command? What is the output from 'cat /proc/zaptel/*' -- Tzafrir Cohen sip:[EMAIL PROTECTED] icq#16849755 iax:[EMAIL PROTECTED] +972-50-7952406 jabber:[EMAIL PROTECTED] [EMAIL PROTECTED] http://www.xorcom.com ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] X100P clone not working
Tzafrir Cohen: > On Sat, Jul 22, 2006 at 09:02:48PM +0200, Frank Darner wrote: > > Hi, > > > > I have problem to set up an X100P clone card. > > Installation of zaptel was successful. > > Also modprobe of zaptel, ztdummy and wcfxo without problems. > > > > kernel: wcfxo: module not supported by Novell, setting U taint flag. > > kernel: ACPI: PCI Interrupt :05:04.0[A] -> GSI 16 (level, low) -> IRQ > > 193 kernel: wcfxo: DAA mode is 'FCC' > > kernel: Found a Wildcard FXO: Generic Clone > > kernel: Registered tone zone 0 (United States / North America) > > > > > > But if I do #ztcfg -vvv no channels will be found. > Hi, OK, I do # modprobe zaptel && modprobe wcfxo > What is the exact output from that command? linux:/proc/zaptel # ztcfg -vvv Zaptel Configuration == Channel map: 0 channels configured. > > What is the output from 'cat /proc/zaptel/*' nothing dir /proc/zaptel but is empty BUT, if I do additional # modprobe ztdummy linux:/proc/zaptel # cat /proc/zaptel/* Span 1: ZTDUMMY/1 "ZTDUMMY/1 1" any ideas ? thanks ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] X100P clone not working
> configs look fine to me > it has to be a module problem im guessing may be, but I dont know whats wrong Zaptel (1.2.6.) installation was without errors and I did not get an error when loading the modules > > try rmmod for zaptel and wctfxo or w/e then modprobing again(must be root) > > if that does not work(which is does on my system, so i added it into a > startup conf) > > >kernel: wcfxo: module not supported by Novell > > are you sure that wcfxo is the correct module for that device?? Yes, I doublechecked with other sites ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] X100P clone not working
Am Sunday 23 July 2006 06:39 schrieb Tzafrir Cohen: > On Sat, Jul 22, 2006 at 09:02:48PM +0200, Frank Darner wrote: > > Hi, > > > > I have problem to set up an X100P clone card. > > Installation of zaptel was successful. > > Also modprobe of zaptel, ztdummy and wcfxo without problems. > > > > kernel: wcfxo: module not supported by Novell, setting U taint flag. > > kernel: ACPI: PCI Interrupt :05:04.0[A] -> GSI 16 (level, low) -> IRQ > > 193 kernel: wcfxo: DAA mode is 'FCC' > > kernel: Found a Wildcard FXO: Generic Clone > > kernel: Registered tone zone 0 (United States / North America) > > > > > > But if I do #ztcfg -vvv no channels will be found. > > What is the exact output from that command? > > What is the output from 'cat /proc/zaptel/*' After delete of all Asterisk files and complete new install I got something: # modprobe zaptel && modprobe wcfxo linux:/proc/zaptel # cat /proc/zaptel/* Span 1: WCFXO/0 "Generic Clone Board 1" RED 1 WCFXO/0/0 but # ztcfg - is still no channels. any ideas? ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] X100P clone not working
> > What is the output from 'cat /proc/zaptel/*' > > After delete of all Asterisk files and complete new install I got > something: > > # modprobe zaptel && modprobe wcfxo > > linux:/proc/zaptel # cat /proc/zaptel/* > Span 1: WCFXO/0 "Generic Clone Board 1" RED > >1 WCFXO/0/0 > > but # ztcfg - > is still no channels. > > any ideas? > OK, I have now an output. For some reason ztcfg was not looking in /etc/asterisk for the zaptel.conf. After using the option -c /etc/asterisk/zaptel.conf everythink was fine. One last thing: Playback sounds now like MickeyMouse, much to slow also Calls SIP to SIP are not any more possible any ideas? ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] X100P clone not working
perhaps not what you're looking for, but reading thru your config, it looks like you've mis-spelled 'echo cancel' as 'echo cancle'On 7/23/06, Frank Darner <[EMAIL PROTECTED]> wrote: > > What is the output from 'cat /proc/zaptel/*'>> After delete of all Asterisk files and complete new install I got> something:>> # modprobe zaptel && modprobe wcfxo >> linux:/proc/zaptel # cat /proc/zaptel/*> Span 1: WCFXO/0 "Generic Clone Board 1" RED>>1 WCFXO/0/0>> but # ztcfg -> is still no channels. >> any ideas?>OK, I have now an output.For some reason ztcfg was not looking in /etc/asterisk for the zaptel.conf.After using the option -c /etc/asterisk/zaptel.conf everythink was fine. One last thing:Playback sounds now like MickeyMouse, much to slowalso Calls SIP to SIP are not any more possibleany ideas?___ --Bandwidth and Colocation provided by Easynews.com --asterisk-users mailing listTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] X100P clone not working
Tom Lynn: > perhaps not what you're looking for, but reading thru your config, it looks > like you've mis-spelled 'echo cancel' as 'echo cancle' you are right, typo thank you ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] X100P clone not working
look udev rules???On 7/23/06, Frank Darner <[EMAIL PROTECTED]> wrote: Tom Lynn:> perhaps not what you're looking for, but reading thru your config, it looks> like you've mis-spelled 'echo cancel' as 'echo cancle'you are right, typothank you___ --Bandwidth and Colocation provided by Easynews.com --asterisk-users mailing listTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] X100P clone not working
Am Sunday 23 July 2006 20:58 schrieb Walter Willis: > look udev rules??? the problem was related that ztcfg did not find zaptel.com -c /etc/asterisk/zaptel.conf has solved this issue #ztcfg --help -c -- Use instead of /etc/zaptel.conf my failure, I should read man page more carefully now am trying to get it working, the sound is still unreliable ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE : [asterisk-users] X100P clone not working
Hi Franck, NOACPI and the sound must be more clear. And, of course, have you tell to /usr/src/zaptel/zconfig.h and /usr/src/asterisk/Makefil what kind of processor you have and enabled MMX if possible before to compile ? Good Luck ! Francois BERGERET, France. -Message d'origine- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de Frank Darner Envoyé : dimanche 23 juillet 2006 23:41 À : Asterisk Users Mailing List - Non-Commercial Discussion Objet : Re: [asterisk-users] X100P clone not working Am Sunday 23 July 2006 20:58 schrieb Walter Willis: > look udev rules??? the problem was related that ztcfg did not find zaptel.com -c /etc/asterisk/zaptel.conf has solved this issue #ztcfg --help -c -- Use instead of /etc/zaptel.conf my failure, I should read man page more carefully now am trying to get it working, the sound is still unreliable ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] X100P clone not working
On Sun, Jul 23, 2006 at 02:21:01PM +0200, Frank Darner wrote: > > > > > What is the output from 'cat /proc/zaptel/*' > > > > After delete of all Asterisk files and complete new install I got > > something: > > > > # modprobe zaptel && modprobe wcfxo > > > > linux:/proc/zaptel # cat /proc/zaptel/* > > Span 1: WCFXO/0 "Generic Clone Board 1" RED > > > >1 WCFXO/0/0 > > > > but # ztcfg - > > is still no channels. > > > > any ideas? No channel defined in /etc/zaptel.conf, naturally. /me points to xpp/utils/genzaptelconf in the source tree. > > > > OK, I have now an output. > > For some reason ztcfg was not looking in /etc/asterisk for the zaptel.conf. > After using the option -c /etc/asterisk/zaptel.conf everythink was fine. No. It looks for zaptel.conf in /etc/zaptel.conf . This is what the man page reads. This is what strace will tell you. This is even documented in voip-info.org. Zaptel is not part of Asterisk. It's a kernel module. Asterisk's zaptel channel configuration is /etc/asterisk/zapata.conf and has a totally different syntax (e.g: ";" for comments). > > > One last thing: > > Playback sounds now like MickeyMouse, much to slow One sanity check: try zttest . See that it gives values ov 100% or very close to that. -- Tzafrir Cohen sip:[EMAIL PROTECTED] icq#16849755 iax:[EMAIL PROTECTED] +972-50-7952406 jabber:[EMAIL PROTECTED] [EMAIL PROTECTED] http://www.xorcom.com ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] X100P clone not working
> > One last thing: > > > > Playback sounds now like MickeyMouse, much to slow > > One sanity check: try zttest . See that it gives values ov 100% or very > close to that. --- Results after 141 passes --- Best: 99.499512 -- Worst: 83.691406 -- Average: 95.715467 ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users