Re: [asterisk-users] Zaptel problem with pots lines
Hi Tzafrir, you're right. I think I've completely misunderstood the problem. If the problem is that asterisk is not able to write in the CDR the proper line answer status, I can confirm that even my installations behave the same. Sorry Enrico for my fault and thank you to Tzafrir for the correction. Best regards, Marco Signorini. Tzafrir Cohen wrote: > On Mon, Jul 14, 2008 at 08:56:40PM +0200, Enrico Maistro wrote: > >> Hi, >> >> I'm trying to get up and running a TDM400 with a standard italian pots >> line but i'm having >> problems at getting asterisk to detect when the line get answered on >> outgoing calls. >> > > AFAIK chan_zap can only detect answer if it is provided through a > polarity reversal. > > ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zaptel problem with pots lines
On Mon, Jul 14, 2008 at 08:56:40PM +0200, Enrico Maistro wrote: > Hi, > > I'm trying to get up and running a TDM400 with a standard italian pots > line but i'm having > problems at getting asterisk to detect when the line get answered on > outgoing calls. AFAIK chan_zap can only detect answer if it is provided through a polarity reversal. -- Tzafrir Cohen icq#16849755 jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zaptel problem with pots lines
Hi Enrico. I'm quite sure that the differences you have in the zapata.conf doesn't have any effect on the problem. If I'm not wrong: "language=it" tells asterisk to use the italian sounds (if available) for any calls related to this zap channel; "rxgain = 0.0" is related only to perceived audio gain "jbenable = no" is forcing the jitter buffer off for this zap channel. Let us know if you have problems with zaptel-1.4.6. I can assure that with this version and this configuration more than one installation with TDM400P I'm responsible for is working fine (since 1.4.6 came out). Could be that the problem is related to Asterisk 1.6? Unfortunately I never had the possibility to try this new version. Best regards, Marco Signorini. Enrico Maistro wrote: > My zapata.conf differs in: > language = it instead of en > rxgain = 0.0 instead of 3.0 > jbenable = no instead of yes > > Unfortunatly even with your exact same configuration nothing change. > > >> I'm using zaptel-1.4.6 and asterisk-1.4.20.1. >> > > I'll give a try with zaptel-1.4.6... > ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zaptel problem with pots lines
Hi Marco, Marco Signorini wrote: > Hi Enrico. > In Italy the polarity reversal is never used. Good to know... at least i can stop messing with it. > I'm using the TDM400 with an FXO port in Italy with the config reported > below and is working properly in any situations: > > --- zaptel.conf --- > fxsks=1 > loadzone=it > defaultzone=it My zaptel.conf is exactly the same. > --- zapata.conf --- > [channels] > language=en > context=from-tdm-fxo > signalling=fxs_ks > threewaycalling=yes > transfer=yes > canpark=yes > cancallforward=yes > callreturn=yes > busydetect=yes > busycount=6 > usecallerid=yes > callerid=asreceived > echocancel=yes > echocancelwhenbridged=no > relaxdtmf=yes > rxgain=3.0 > txgain=0.0 > amaflags=billing > group=1 > callgroup=1 > pickupgroup=1 > jbenable=yes > faxdetect=no > > channel => 1 My zapata.conf differs in: language = it instead of en rxgain = 0.0 instead of 3.0 jbenable = no instead of yes Unfortunatly even with your exact same configuration nothing change. > I'm using zaptel-1.4.6 and asterisk-1.4.20.1. I'll give a try with zaptel-1.4.6... > I hope this could help you. > > Best regards, > Marco Signorini. Regards, Enrico Maistro ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zaptel problem with pots lines
Hi Giorgio, Giorgio Incantalupo wrote: > Hi Enrico, > have you tried with busydetect=yes? It (sometimes) worked for me with > Asterisk 1.2. > > > Giorgio I'm already using busydetect=yes to detect hangup and busy conditions with good results, but it doesn't seem to be of any help on detecting answer conditions. Enrico ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zaptel problem with pots lines
Hi Noah, > Hi Enrico - > >> I'm trying to get up and running a TDM400 with a standard italian pots >> line but i'm having >> problems at getting asterisk to detect when the line get answered on >> outgoing calls. >> >> I'm using asterisk 1.6 beta 9 with zaptel 1.4.11. >> >> Zaptel channels use fxs_ks signalling . > > I must admit I know nothing about Italian phone lines, but maybe you > could try other signalling methods? Maybe ground start or loop start > would work. > > > - Noah Unfortunatly i already tried both loop start and ground start without any luck... after googling around for a while it seems clear that the right signalling to use here in Italy is ks. Enrico ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zaptel problem with pots lines
Hi Enrico. In Italy the polarity reversal is never used. I'm using the TDM400 with an FXO port in Italy with the config reported below and is working properly in any situations: --- zaptel.conf --- fxsks=1 loadzone=it defaultzone=it --- zapata.conf --- [channels] language=en context=from-tdm-fxo signalling=fxs_ks threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes busydetect=yes busycount=6 usecallerid=yes callerid=asreceived echocancel=yes echocancelwhenbridged=no relaxdtmf=yes rxgain=3.0 txgain=0.0 amaflags=billing group=1 callgroup=1 pickupgroup=1 jbenable=yes faxdetect=no channel => 1 I'm using zaptel-1.4.6 and asterisk-1.4.20.1. I hope this could help you. Best regards, Marco Signorini. Enrico Maistro wrote: > Hi, > > I'm trying to get up and running a TDM400 with a standard italian pots > line but i'm having > problems at getting asterisk to detect when the line get answered on > outgoing calls. > > I'm using asterisk 1.6 beta 9 with zaptel 1.4.11. > > I tried with and without answeronpolarityswitch=yes but it didn't change > anything at all. > > With callprogress=yes answer get never detected. > With callprogress=no line get answered as soon as it start ringing, > regardless if someone > really answer the call. > > > Zaptel channels use fxs_ks signalling . > > Loading wctdm module with debug=1 result in: > > kernel: Freshmaker version: 73 > kernel: Freshmaker passed register test > kernel: ProSLIC on module 0, product 3, version 15 > kernel: VoiceDAA System: 04 > kernel: ISO-Cap is now up, line side: 03 rev 06 > kernel: setting FXO tx gain for card=0 to 0 > kernel: setting FXO rx gain for card=0 to 0 > kernel: DEBUG fxotxgain:0.0 fxorxgain:0.0 > kernel: Module 0: Installed -- AUTO FXO (FCC mode) > kernel: ProSLIC on module 1, product 0, version 0 > kernel: VoiceDAA System: 04 > kernel: ISO-Cap is now up, line side: 03 rev 06 > kernel: setting FXO tx gain for card=1 to 0 > kernel: setting FXO rx gain for card=1 to 0 > kernel: DEBUG fxotxgain:0.0 fxorxgain:0.0 > kernel: Module 1: Installed -- AUTO FXO (FCC mode) > kernel: ProSLIC on module 2, product 0, version 0 > kernel: Module 2: Not installed > kernel: ProSLIC on module 3, product 0, version 0 > kernel: Module 3: Not installed > kernel: Found a Wildcard TDM: Wildcard TDM400P REV I (2 modules) > kernel: 4294908325 Polarity reversed (0 -> -1) > kernel: 4294908326 Polarity reversed (0 -> 1) > kernel: BATTERY on 1/1 (-)! > kernel: NO BATTERY on 1/2! > > Any suggestion? > Am i trying to do something that simply can't be done? > > Thanks, > Enrico Maistro > > > ___ > ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zaptel problem with pots lines
Hi Enrico, have you tried with busydetect=yes? It (sometimes) worked for me with Asterisk 1.2. Giorgio Enrico Maistro wrote: > Hi, > > I'm trying to get up and running a TDM400 with a standard italian pots > line but i'm having > problems at getting asterisk to detect when the line get answered on > outgoing calls. > > I'm using asterisk 1.6 beta 9 with zaptel 1.4.11. > > I tried with and without answeronpolarityswitch=yes but it didn't change > anything at all. > > With callprogress=yes answer get never detected. > With callprogress=no line get answered as soon as it start ringing, > regardless if someone > really answer the call. > > > Zaptel channels use fxs_ks signalling . > > Loading wctdm module with debug=1 result in: > > kernel: Freshmaker version: 73 > kernel: Freshmaker passed register test > kernel: ProSLIC on module 0, product 3, version 15 > kernel: VoiceDAA System: 04 > kernel: ISO-Cap is now up, line side: 03 rev 06 > kernel: setting FXO tx gain for card=0 to 0 > kernel: setting FXO rx gain for card=0 to 0 > kernel: DEBUG fxotxgain:0.0 fxorxgain:0.0 > kernel: Module 0: Installed -- AUTO FXO (FCC mode) > kernel: ProSLIC on module 1, product 0, version 0 > kernel: VoiceDAA System: 04 > kernel: ISO-Cap is now up, line side: 03 rev 06 > kernel: setting FXO tx gain for card=1 to 0 > kernel: setting FXO rx gain for card=1 to 0 > kernel: DEBUG fxotxgain:0.0 fxorxgain:0.0 > kernel: Module 1: Installed -- AUTO FXO (FCC mode) > kernel: ProSLIC on module 2, product 0, version 0 > kernel: Module 2: Not installed > kernel: ProSLIC on module 3, product 0, version 0 > kernel: Module 3: Not installed > kernel: Found a Wildcard TDM: Wildcard TDM400P REV I (2 modules) > kernel: 4294908325 Polarity reversed (0 -> -1) > kernel: 4294908326 Polarity reversed (0 -> 1) > kernel: BATTERY on 1/1 (-)! > kernel: NO BATTERY on 1/2! > > Any suggestion? > Am i trying to do something that simply can't be done? > > Thanks, > Enrico Maistro > > > ___ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > AstriCon 2008 - September 22 - 25 Phoenix, Arizona > Register Now: http://www.astricon.net > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > > -- _ Giorgio Incantalupo, mailto:[EMAIL PROTECTED] FG&A srl - http://www.fgasoftware.com - [EMAIL PROTECTED] - The Agile PBX http://www.voiceatwork.eu Tel: 02997663.14, Fax: 0291390172 ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zaptel problem with pots lines
Hi Enrico - > I'm trying to get up and running a TDM400 with a standard italian pots > line but i'm having > problems at getting asterisk to detect when the line get answered on > outgoing calls. > > I'm using asterisk 1.6 beta 9 with zaptel 1.4.11. > > Zaptel channels use fxs_ks signalling . I must admit I know nothing about Italian phone lines, but maybe you could try other signalling methods? Maybe ground start or loop start would work. - Noah ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users