Re: [AusNOG] NBN NCAS on Cisco 867VAE-K9
Hey Simon, My apologies I should clarify. I am of the understanding that Cisco have two SKU’s for the 867 without wireless. There is the old Cisco 867VAE and the newer C867VAE. The latter might have this support, the original definitely doesn’t (I owned and used one at home) personally I remember testing 867’s with VDSL and threw them in the bin when we very quickly realised the sync issues. Jarryd Sullivan From: Simon Attwell Sent: Tuesday, 9 April 2019 1:14 PM To: Jarryd Sullivan Cc: dynamic.mine...@gmail.com; ausnog@lists.ausnog.net Subject: Re: [AusNOG] NBN NCAS on Cisco 867VAE-K9 Jarryd, That seems to conflict with the information available from Cisco. The 867VAE and the 867VAE-W both have VAE2_A_39t_B39d_24m.SSA.bin available as a firmware option for the onboard VDSL2 modem. Personally I run the 887VA-W-A-K9 in most customer scenarios. - Simon -- Simon Attwell Senior Systems and Network Engineer Attwell's Technical Services Pty Ltd Mobile: 0409 756 819 Email: mailto:si...@attwell.net On Tue, 9 Apr 2019 at 13:42, Jarryd Sullivan <mailto:jarryd.sulli...@area9.com.au> wrote: Can confirm that the 867VAE-K9 in any form will not work, only the later wireless model that was released had the ability to have the VDSL controller firmware updated which supported vectoring. The non-wireless models are basically pointless now. We’ve moved to C887VA’s for all our small deployments where the 867 used to fit. Jarryd Sullivan From: AusNOG <mailto:ausnog-boun...@lists.ausnog.net> On Behalf Of Pouya Madani Sent: Tuesday, 9 April 2019 11:58 AM To: mailto:ausnog@lists.ausnog.net Subject: [AusNOG] NBN NCAS on Cisco 867VAE-K9 Hi, Has anyone had any luck with configuring a Cisco 867VAE-K9 (not the 867VAE-W) on NBN NCAS? [VDSL handoff, and Vlan tag 100 on WAN (via AAPT)] I have almost tried any recommendations on AusNog, Whirpool, Cisco and many other Communities with no luck. I understand 867VAE chipset is different to 867VAE-W, and that 867VAE-W works just fine on NBN NCAS, but the 867VAE-K9 has not worked for me yet. Has anyone got an 867VAE-K9 working on NCAS by any chance, and if so can I have a copy of the vdsl controller and ethernet0.100 config please? Kind Regards, Pedro Madani The information contained in this message and any attachments may be confidential information. If you are not the intended recipient, you must not use or forward the information contained in these documents. If you have received this message in error, please delete the email and notify the sender. Internet communications are not secure. You should scan this message and any attachments for viruses. Under no circumstances do we accept liability for any loss or damage which may result from your receipt of this message or any attachments. ___ AusNOG mailing list mailto:AusNOG@lists.ausnog.net https://hes32-ctp.trendmicro.com:443/wis/clicktime/v1/query?url=http%3a%2f%2flists.ausnog.net%2fmailman%2flistinfo%2fausnog&umid=9e93eedf-d89c-4929-abc4-d49589b22ca8&auth=391e26e189452704249ba80a8466c109fc4964f8-bac916a028dddaf1917507853aa7dc60ee524e65 ___ AusNOG mailing list AusNOG@lists.ausnog.net http://lists.ausnog.net/mailman/listinfo/ausnog
Re: [AusNOG] NBN NCAS on Cisco 867VAE-K9
Jarryd, That seems to conflict with the information available from Cisco. The 867VAE and the 867VAE-W both have VAE2_A_39t_B39d_24m.SSA.bin available as a firmware option for the onboard VDSL2 modem. Personally I run the 887VA-W-A-K9 in most customer scenarios. - Simon -- Simon Attwell Senior Systems and Network Engineer Attwell's Technical Services Pty Ltd Mobile: 0409 756 819 Email: si...@attwell.net On Tue, 9 Apr 2019 at 13:42, Jarryd Sullivan wrote: > Can confirm that the 867VAE-K9 in any form will not work, only the later > wireless model that was released had the ability to have the VDSL > controller firmware updated which supported vectoring. The non-wireless > models are basically pointless now. We’ve moved to C887VA’s for all our > small deployments where the 867 used to fit. > > Jarryd Sullivan > > > From: AusNOG On Behalf Of Pouya Madani > Sent: Tuesday, 9 April 2019 11:58 AM > To: ausnog@lists.ausnog.net > Subject: [AusNOG] NBN NCAS on Cisco 867VAE-K9 > > Hi, > > Has anyone had any luck with configuring a Cisco 867VAE-K9 (not the > 867VAE-W) on NBN NCAS? [VDSL handoff, and Vlan tag 100 on WAN (via AAPT)] > > I have almost tried any recommendations on AusNog, Whirpool, Cisco and > many other Communities with no luck. I understand 867VAE chipset is > different to 867VAE-W, and that 867VAE-W works just fine on NBN NCAS, but > the 867VAE-K9 has not worked for me yet. > > Has anyone got an 867VAE-K9 working on NCAS by any chance, and if so can I > have a copy of the vdsl controller and ethernet0.100 config please? > > Kind Regards, > Pedro Madani > > > > The information contained in this message and any attachments may be > confidential information. If you are not the intended recipient, you must > not use or forward the information contained in these documents. If you > have received this message in error, please delete the email and notify the > sender. > > Internet communications are not secure. You should scan this message and > any attachments for viruses. Under no circumstances do we accept liability > for any loss or damage which may result from your receipt of this message > or any attachments. > ___ > AusNOG mailing list > AusNOG@lists.ausnog.net > http://lists.ausnog.net/mailman/listinfo/ausnog > ___ AusNOG mailing list AusNOG@lists.ausnog.net http://lists.ausnog.net/mailman/listinfo/ausnog
Re: [AusNOG] NBN NCAS on Cisco 867VAE-K9
Can confirm that the 867VAE-K9 in any form will not work, only the later wireless model that was released had the ability to have the VDSL controller firmware updated which supported vectoring. The non-wireless models are basically pointless now. We’ve moved to C887VA’s for all our small deployments where the 867 used to fit. Jarryd Sullivan From: AusNOG On Behalf Of Pouya Madani Sent: Tuesday, 9 April 2019 11:58 AM To: ausnog@lists.ausnog.net Subject: [AusNOG] NBN NCAS on Cisco 867VAE-K9 Hi, Has anyone had any luck with configuring a Cisco 867VAE-K9 (not the 867VAE-W) on NBN NCAS? [VDSL handoff, and Vlan tag 100 on WAN (via AAPT)] I have almost tried any recommendations on AusNog, Whirpool, Cisco and many other Communities with no luck. I understand 867VAE chipset is different to 867VAE-W, and that 867VAE-W works just fine on NBN NCAS, but the 867VAE-K9 has not worked for me yet. Has anyone got an 867VAE-K9 working on NCAS by any chance, and if so can I have a copy of the vdsl controller and ethernet0.100 config please? Kind Regards, Pedro Madani The information contained in this message and any attachments may be confidential information. If you are not the intended recipient, you must not use or forward the information contained in these documents. If you have received this message in error, please delete the email and notify the sender. Internet communications are not secure. You should scan this message and any attachments for viruses. Under no circumstances do we accept liability for any loss or damage which may result from your receipt of this message or any attachments. ___ AusNOG mailing list AusNOG@lists.ausnog.net http://lists.ausnog.net/mailman/listinfo/ausnog
Re: [AusNOG] NBN NCAS on Cisco 867VAE-K9
The 867VAE won't work I am told that the 867VAE-K9 does work, but I am not sure we have run one on NBN. 867VAE-W-A-K9 works on FTTN - if it has IOS version 15.4(3)M5 or newer, and VDSL firmware VAEW_A_39t_B_39d_24m.SSA John On Tue, 9 Apr 2019 at 11:59, Pouya Madani wrote: > Hi, > > Has anyone had any luck with configuring a Cisco 867VAE-K9 (not the > 867VAE-W) on NBN NCAS? [VDSL handoff, and Vlan tag 100 on WAN (via AAPT)] > > I have almost tried any recommendations on AusNog, Whirpool, Cisco and > many other Communities with no luck. I understand 867VAE chipset is > different to 867VAE-W, and that 867VAE-W works just fine on NBN NCAS, but > the 867VAE-K9 has not worked for me yet. > > Has anyone got an 867VAE-K9 working on NCAS by any chance, and if so can I > have a copy of the vdsl controller and ethernet0.100 config please? > > Kind Regards, > Pedro Madani > ___ > AusNOG mailing list > AusNOG@lists.ausnog.net > http://lists.ausnog.net/mailman/listinfo/ausnog > ___ AusNOG mailing list AusNOG@lists.ausnog.net http://lists.ausnog.net/mailman/listinfo/ausnog
Re: [AusNOG] NBN NCAS on Cisco 867VAE-K9
Hi Pouya, We had this working on Cisco 1941 and 887VA routers last year, but have not tested on the model you specified. It is possible that it simply isn’t supported. Thanks Brett Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 From: AusNOG on behalf of Nathan Brookfield Sent: Tuesday, April 9, 2019 12:37:34 PM To: dynamic.mine...@gmail.com; ausnog@lists.ausnog.net Subject: Re: [AusNOG] NBN NCAS on Cisco 867VAE-K9 Hi Pouya, It is my understanding and belief that firmware that supports the vectoring required by NBN is not available for this device. Happy to be corrected. Kindest Regards, Nathan Brookfield (VK2NAB) From: AusNOG On Behalf Of Pouya Madani Sent: Tuesday, April 9, 2019 12:28 PM To: ausnog@lists.ausnog.net Subject: [AusNOG] NBN NCAS on Cisco 867VAE-K9 Hi, Has anyone had any luck with configuring a Cisco 867VAE-K9 (not the 867VAE-W) on NBN NCAS? [VDSL handoff, and Vlan tag 100 on WAN (via AAPT)] I have almost tried any recommendations on AusNog, Whirpool, Cisco and many other Communities with no luck. I understand 867VAE chipset is different to 867VAE-W, and that 867VAE-W works just fine on NBN NCAS, but the 867VAE-K9 has not worked for me yet. Has anyone got an 867VAE-K9 working on NCAS by any chance, and if so can I have a copy of the vdsl controller and ethernet0.100 config please? Kind Regards, Pedro Madani ___ AusNOG mailing list AusNOG@lists.ausnog.net http://lists.ausnog.net/mailman/listinfo/ausnog
Re: [AusNOG] NBN NCAS on Cisco 867VAE-K9
Hi Pouya, It is my understanding and belief that firmware that supports the vectoring required by NBN is not available for this device. Happy to be corrected. Kindest Regards, Nathan Brookfield (VK2NAB) From: AusNOG On Behalf Of Pouya Madani Sent: Tuesday, April 9, 2019 12:28 PM To: ausnog@lists.ausnog.net Subject: [AusNOG] NBN NCAS on Cisco 867VAE-K9 Hi, Has anyone had any luck with configuring a Cisco 867VAE-K9 (not the 867VAE-W) on NBN NCAS? [VDSL handoff, and Vlan tag 100 on WAN (via AAPT)] I have almost tried any recommendations on AusNog, Whirpool, Cisco and many other Communities with no luck. I understand 867VAE chipset is different to 867VAE-W, and that 867VAE-W works just fine on NBN NCAS, but the 867VAE-K9 has not worked for me yet. Has anyone got an 867VAE-K9 working on NCAS by any chance, and if so can I have a copy of the vdsl controller and ethernet0.100 config please? Kind Regards, Pedro Madani ___ AusNOG mailing list AusNOG@lists.ausnog.net http://lists.ausnog.net/mailman/listinfo/ausnog
[AusNOG] NBN NCAS on Cisco 867VAE-K9
Hi, Has anyone had any luck with configuring a Cisco 867VAE-K9 (not the 867VAE-W) on NBN NCAS? [VDSL handoff, and Vlan tag 100 on WAN (via AAPT)] I have almost tried any recommendations on AusNog, Whirpool, Cisco and many other Communities with no luck. I understand 867VAE chipset is different to 867VAE-W, and that 867VAE-W works just fine on NBN NCAS, but the 867VAE-K9 has not worked for me yet. Has anyone got an 867VAE-K9 working on NCAS by any chance, and if so can I have a copy of the vdsl controller and ethernet0.100 config please? Kind Regards, Pedro Madani ___ AusNOG mailing list AusNOG@lists.ausnog.net http://lists.ausnog.net/mailman/listinfo/ausnog