Re: [Axapta-Knowledge-Village] Ledger Budget
Have you checked your budget start and end date? Try start date 1/1/2006 and end date 12/31/2006 Regards, Sun Fen Chen On 7/6/05, G Radhakrishnan [EMAIL PROTECTED] wrote: So far I did , 1. Created Budget Model 2. Created Period Key 3. In the lines button, I gave change=1, Unit=Month,and allocation % 4. In ledger Budget Form, General Tab, I gave Method=Key and Period key=respective key 5. When I clicked Budget balance, the complete amount is shown under 1 month instead spreading equally as I mentioned in allocation % 6. When I clicked Show report transaction as well as ledget budget report, the amount is splitted as per the % but the month(date) is showing the same instead of 12 months. What could be reason. Thanks in advance. --- Sun Fen Chen [EMAIL PROTECTED] wrote: for budget you don't need to create a new COA. just use your existing COA. are you using method=Key or Period? If Period it will create budget based on your frequency setup from the start date until end date. If Key, it will create based on the percentage that you specify in the Allocation key setup. Click Show report transaction checkbox to explode your budget. there are some good reports that you can explore in the report budget folder. Regards, Sun fen chen On 7/5/05, G Radhakrishnan [EMAIL PROTECTED] wrote: Hi Krishnan, Thank u. I created an account for budget-Purchases and I created a purchase journal. During my purchase transaction, the offset account I gave Budget-Purchases. Am I right? Problems faced are, 1. I created a key with total budget amount and is not alloted for 12 months. I mean, the entire amount is alloted for the 1st period. How to solve this? 2. Is there any report showing all 12 months with budgeted amount and actual amount consumed? Hope u understood. Pls. advise if any thing is worng in the above transaction. Thanks in advance --- Krishnan.S - Leader (Enterprise Solutions Practice) - SIS [EMAIL PROTECTED] wrote: this is for the budget amount to be posted into the ledger a/c, on transactions you can see the balance the ledger a/c which can be mapped to any of your purchase or sales transactions regards krishnan -Original Message- From: Axapta-Knowledge-Village@yahoogroups.com [mailto:[EMAIL PROTECTED] Behalf Of G Radhakrishnan Sent: Tuesday, July 05, 2005 2:18 PM To: Axapta Group Subject: [Axapta-Knowledge-Village] Ledger Budget Hi friends, Iam novice to Axapta Package. We are into an manufacturing unit of Garments. Can anybody help me abt the concepts of Ledger Budget Module under GL. I could not find real stuff from the guides. Thanks in advance. Yahoo! Sports Rekindle the Rivalries. Sign up for Fantasy Football http://football.fantasysports.yahoo.com Sharing the knowledge on Axapta. Yahoo! Groups Links ___ 'Visit us at www.sundaramfinance.com' ___ This E-mail may contain privileged information and is intended solely for the addressee, and any disclosure of this information is strictly prohibited, and may be unlawful. If you have received this mail by mistake, please inform us immediately and delete this mail. Any information expressed in this mail does not necessarily reflect the views of SUNDARAM FINANCE LIMITED. As per SUNDARAM FINANCE LIMITED's policy, unencrypted mail via Internet is not considered secure. ___ Yahoo! Sports Rekindle the Rivalries. Sign up for Fantasy Football http://football.fantasysports.yahoo.com Sharing the knowledge on Axapta. Yahoo! Groups Links -- Regards, Sun fen __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com Sharing the knowledge on Axapta. Yahoo! Groups Links -- Regards, Sun fen Sharing the knowledge on Axapta. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Axapta-Knowledge-Village/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Axapta-Knowledge-Village] [Urgent] inventSerialid activatation after using item.
Hi all; For a group of item we didn't use inventSerialid until now. But now we need to activate serialid. Will it create any problem for us? If it creates problem how can we solve? Thanks. Sharing the knowledge on Axapta. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Axapta-Knowledge-Village/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ winmail.dat
[Axapta-Knowledge-Village] Localmacro help please
Title: Message Hi all, When a localmacro list object is defined in the classDeclaration, only a certain number of variables are allowed.The pack and unpack methods gives the following compiler error:"Overflow in an internal compiler stack." #LOCALMACRO.ParmList parmId, . . //variable listof 108 variables #ENDMACRO Is this an Axapta problem? Should more than 1 localmacro list object be used? How would more than 1 localmacro list object be implemented? -* Hennie Potgieter Senior Business Analyst UTi SUN Couriers Division Centurion, South Africa Cell: 0829208315 mailto: [EMAIL PROTECTED] Sharing the knowledge on Axapta. YAHOO! GROUPS LINKS Visit your group "Axapta-Knowledge-Village" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [Axapta-Knowledge-Village] Localmacro help please
Well, some long time ago I tried to put some code in Macros. I've tested that from some point, the code is ignored. Just try to create a localmacro with a throath of print 1; print 2; etc... print 1000 You'll see that calling this macro doesn't print all lines... Perhaps this is the cause of your overflow. Raúl Llorente Peña Análisis, Desarrollo e Implementación en Microsoft Bussiness Solutions-Axapta OPEN SOLUTIONS Hennie Potgieter [EMAIL PROTECTED] Enviado por: Axapta-Knowledge-Village@yahoogroups.com 08/07/2005 10:13 Por favor, responda a Axapta-Knowledge-Village@yahoogroups.com Para Axapta-Knowledge-Village@yahoogroups.com cc Asunto [Axapta-Knowledge-Village] Localmacro help please Hi all, When a localmacro list object is defined in the classDeclaration, only a certain number of variables are allowed. The pack and unpack methods gives the following compiler error: Overflow in an internal compiler stack. #LOCALMACRO.ParmList parmId, . . //variable list of 108 variables #ENDMACRO Is this an Axapta problem? Should more than 1 localmacro list object be used? How would more than 1 localmacro list object be implemented? -* Hennie Potgieter Senior Business Analyst UTi SUN Couriers Division Centurion, South Africa Cell: 0829208315 mailto: [EMAIL PROTECTED] Sharing the knowledge on Axapta. YAHOO! GROUPS LINKS Visit your group Axapta-Knowledge-Village on the web. To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. Sharing the knowledge on Axapta. YAHOO! GROUPS LINKS Visit your group "Axapta-Knowledge-Village" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [Axapta-Knowledge-Village] Localmacro help please
Hi, Hennie Potgieter, Axapta has a stack memory limitation for total elements in a container. You may solve this problem by reducing the total elements in a container by dividing them into containers. I tried to create a container and as I know, the maximum element is 48. You can change the macro in classDeclaration, pack and unpack method: //classdeclaration class MyReport extends RunBaseReport { #localmacro.CurrentList1 a1, a2, //... 48 elements a48 #endmacro #localmacro.CurrentList2 b1, b2, //... 48 elements b48 #endmacro #localmacro.CurrentList3 c1, c2, //... 48 elements c48 #endmacro } public container pack() { return [#CurrentVersion, [#CurrentList1], [#CurrentList2], [#CurrentList3], super()]; } public boolean unpack(container packedClass) { int version = runbase::getVersion(packedClass); Container con; Container con1; Container con2; Container con3; switch (version) { case #CurrentVersion: [version,con1,con2,con3,con] = packedClass; [#CurrentList1] = con1; [#CurrentList2] = con2; [#CurrentList3] = con3; return super(con); default : return false; } return false; } Good luck! Regards, Sonny Wibawa Adi, MBCSP, MCAD.NET, MCSD.NET, MCP --- Hennie Potgieter [EMAIL PROTECTED] wrote: Hi all, When a localmacro list object is defined in the classDeclaration, only a certain number of variables are allowed. The pack and unpack methods gives the following compiler error: Overflow in an internal compiler stack. #LOCALMACRO.ParmList parmId, . . //variable list of 108 variables #ENDMACRO Is this an Axapta problem? Should more than 1 localmacro list object be used? How would more than 1 localmacro list object be implemented? -* Hennie Potgieter Senior Business Analyst UTi SUN Couriers Division Centurion, South Africa Cell: 0829208315 mailto: mailto:[EMAIL PROTECTED] [EMAIL PROTECTED] __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com Sharing the knowledge on Axapta. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Axapta-Knowledge-Village/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Axapta-Knowledge-Village] Missing tables in SQL
Hi, SQL Server 2005 don´t work with Axapta today. The only version in the future that supports this new database will bethe 4.0 versión. Is posible MBS generates a Axapta 3.0 version (in the SP5) but is not sure. I think only new version of Axapta works with this database. Regards. David Casas - Original Message - From: axchi04 To: Axapta-Knowledge-Village@yahoogroups.com Sent: Thursday, July 07, 2005 2:55 PM Subject: [Axapta-Knowledge-Village] Missing tables in SQL Hi,SQL 2005 (made the conversion to 2000 for the database) has been installed. The user bmssa has been assigned to the database and I have setup a ODBC to this database. Everything works fine and has been installed successfully and the connection works too.Then I run the Axapta Install - 2 Tier and filled in all the correct parameters - database server / odbc, etc... However, after a complete install (and rebooting the machine) somehow the tables are missing for axapta. No tables have been created at all.What am I doing wrong here? Any help much appreciated...Thanks!Sharing the knowledge on Axapta. Sharing the knowledge on Axapta. YAHOO! GROUPS LINKS Visit your group "Axapta-Knowledge-Village" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.