[BlindHandyMan] air compressor
I agree that it is a very good practice to drain the condensation out of the compressor tank . Art - Original Message - From: Agent086b To: blindhandyman@yahoogroups.com Sent: Sunday, May 09, 2010 6:45 PM Subject: Re: [BlindHandyMan] using an air nailer and an air compressor Hi, do I take it you don't drain the condensation out of the compressor? I have been doing this every time I turn it off. Not sure if this is necessary but a lot of water comes out at times. Max. On 10/05/2010 08:15, Phil Parr wrote: > I have had an air compressor for a while now and never had any trouble using my nail guns. I have three, a framing gun what they call a brad gun and a middle size one. If the gun is not shooting hard enough tern up the pressure some. I also have many other pneumatic tools and just connect them and go. In fact, when I built my shop I ran p v c pipe thru the wall and put my compressor in another room so it wouldn't be so noisy. I just have a switch to tern it on and off in the shop, I never see the regulator at all. > > Phil Parr. > > [Non-text portions of this message have been removed] > > > > > > Send any questions regarding list management to: > blindhandyman-ow...@yahoogroups.com > To listen to the show archives go to link > http://www.acbradio.org/pweb/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=33&MMN_position=47:29 > Or > ftp://ftp.acbradio.org/acbradio-archives/handyman/ > > The Pod Cast address for the Blind Handy Man Show is. > http://www.acbradio.org/news/xml/podcast.php?pgm=saturday > > Visit The Blind Handy Man Files Page To Review Contributions From Various List Members At The Following address: > http://www.jaws-users.com/JAWS/handyman/ > > Visit the archives page at the following address > http://www.mail-archive.com/blindhandyman@yahoogroups.com/ > > If you would like to join the JAWS Users List, then visit the following address for more information: > http://www.jaws-users.com/ > For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: > blindhandyman-h...@yahoogroups.comyahoo! Groups Links > > > > [Non-text portions of this message have been removed]
Re: [BlindHandyMan] Quick Step Floating Flooring
Dear Ray: We put down laminate flooring in our kitchen and din two months ago, and the most difficult problem we had was working around the door trim, as removing it all together was not practical. We ended up using a thin hand saw and laying it on top of a piece of the flooring and then cutting off the bottom end of the trim. It was still a bear of a job. We found out quickly that the laminate flooring will not stand up to chairs sliding, unless plenty of felt is applied to the bottom of the chairs. This notion to replace our plush warm carpet, in the din, and solid vinyl in the kitchen, was entirely the idea of the first wife. Good luck with your project. Yours Truly, Clifford Wilson - Original Message - From: Ray Boyce To: blindhandyman@yahoogroups.com Sent: Sunday, May 09, 2010 6:29 PM Subject: [BlindHandyMan] Quick Step Floating Flooring Hi All We are about to have put down in our lounge hall dining and kitchen areas 46 square metres of quick step white ash floating flooring. This white ash colour is deceptive because it is not white as the colour suggests. What I have to do is remove all furniture carpets underlay and vinyl and all mouldings around the walls at floor level. I might have to remove the ply under the vinyl also but until I remove the carpet and vinyl and have a feel at the difference in height I am not sure just yet. Then remove the carpet tension hooks around the walls so the floating floor can fit up to the sheet rock. I also have to remove the dishwasher for the flooring goes under this as well as the refrigerator. Then after the floor goes in put back on the floor moulding. The difficult part is removing this wood moulding without damaging it for it is nailed on and we have to reuse it. I am going to screw it back on so if I have to remove it to replace any damaged sections in the future this process will be a little easier. Where the flooring buts up to the kicks in the kitchen we are going to stain the moulding the same colour as the kicks. We have to then put on stick on felt pads on the bottoms of all chairs and furniture so damage from usage is kept as low as possible. So there is plenty of work ahead. I have included the URL for those who would like to read up on this flooring. http://www.quick-step.com/ [Non-text portions of this message have been removed] __ Information from ESET NOD32 Antivirus, version of virus signature database 5099 (20100509) __ The message was checked by ESET NOD32 Antivirus. http://www.eset.com __ Information from ESET NOD32 Antivirus, version of virus signature database 5099 (20100509) __ The message was checked by ESET NOD32 Antivirus. http://www.eset.com [Non-text portions of this message have been removed]
Re: [BlindHandyMan] using an air nailer and an air compressor
Hi, do I take it you don't drain the condensation out of the compressor? I have been doing this every time I turn it off. Not sure if this is necessary but a lot of water comes out at times. Max. On 10/05/2010 08:15, Phil Parr wrote: > I have had an air compressor for a while now and never had any trouble > using my nail guns. I have three, a framing gun what they call a brad gun and > a middle size one. If the gun is not shooting hard enough tern up the > pressure some. I also have many other pneumatic tools and just connect them > and go. In fact, when I built my shop I ran p v c pipe thru the wall and put > my compressor in another room so it wouldn't be so noisy. I just have a > switch to tern it on and off in the shop, I never see the regulator at all. > > Phil Parr. > > [Non-text portions of this message have been removed] > > > > > > Send any questions regarding list management to: > blindhandyman-ow...@yahoogroups.com > To listen to the show archives go to link > http://www.acbradio.org/pweb/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=33&MMN_position=47:29 > Or > ftp://ftp.acbradio.org/acbradio-archives/handyman/ > > The Pod Cast address for the Blind Handy Man Show is. > http://www.acbradio.org/news/xml/podcast.php?pgm=saturday > > Visit The Blind Handy Man Files Page To Review Contributions From Various > List Members At The Following address: > http://www.jaws-users.com/JAWS/handyman/ > > Visit the archives page at the following address > http://www.mail-archive.com/blindhandyman@yahoogroups.com/ > > If you would like to join the JAWS Users List, then visit the following > address for more information: > http://www.jaws-users.com/ > For a complete list of email commands pertaining to the Blind Handy Man list > just send a blank message to: > blindhandyman-h...@yahoogroups.comyahoo! Groups Links > > > >
[BlindHandyMan] Quick Step Floating Flooring
Hi All We are about to have put down in our lounge hall dining and kitchen areas 46 square metres of quick step white ash floating flooring. This white ash colour is deceptive because it is not white as the colour suggests. What I have to do is remove all furniture carpets underlay and vinyl and all mouldings around the walls at floor level. I might have to remove the ply under the vinyl also but until I remove the carpet and vinyl and have a feel at the difference in height I am not sure just yet. Then remove the carpet tension hooks around the walls so the floating floor can fit up to the sheet rock. I also have to remove the dishwasher for the flooring goes under this as well as the refrigerator. Then after the floor goes in put back on the floor moulding. The difficult part is removing this wood moulding without damaging it for it is nailed on and we have to reuse it. I am going to screw it back on so if I have to remove it to replace any damaged sections in the future this process will be a little easier. Where the flooring buts up to the kicks in the kitchen we are going to stain the moulding the same colour as the kicks. We have to then put on stick on felt pads on the bottoms of all chairs and furniture so damage from usage is kept as low as possible. So there is plenty of work ahead. I have included the URL for those who would like to read up on this flooring. http://www.quick-step.com/ [Non-text portions of this message have been removed]
Re: [BlindHandyMan] using an air nailer and an air compressor
I have had an air compressor for a while now and never had any trouble using my nail guns. I have three, a framing gun what they call a brad gun and a middle size one. If the gun is not shooting hard enough tern up the pressure some. I also have many other pneumatic tools and just connect them and go. In fact, when I built my shop I ran p v c pipe thru the wall and put my compressor in another room so it wouldn't be so noisy. I just have a switch to tern it on and off in the shop, I never see the regulator at all. Phil Parr. [Non-text portions of this message have been removed]
[BlindHandyMan] Triton router table
Hi all, does anybody own a Triton router Table? I have recently purchased one and am having a little problem working out all the pieces. If anybody does I really could use some help. Thanks, Max.