[OSL | CCIE_Voice] SRST mode

[Balamurugan Singaram]

Hi,
   
  BR2, phone1-3001 and phone2-3002 and HQ phone1-1001 and phone2-1002. 
   
  When the BR2 is in SRST mode, can I call BR2 from HQ with normal 4 digit 
number [3001] or 10 digit pstn numbers to reach BR2. 
   
  Normal user from HQ will dial only the 4 digit number to reach BR2 [3001, 
3002], but it is not hitting the BR2 phone at SRST mode. But I can call BR2 
with 10 digit PSTN number it hitting BR2, It is normal or I should reach the 
BR2 with 4 digit number from HQ in SRST mode also.
   
  Please let me know your suggestion.
   
  Thanks,
  Bala.

 Send instant messages to your online friends http://uk.messenger.yahoo.com 

[OSL | CCIE_Voice] Need Clarification on Voice Workbook Mulitprotocol Challenge J, Section 27.15

[Mike Schultz (US)]

In that section we are instructed to configure CME in Branch 2.  In the
same section, we are also instructed to configure paging for branch 1-
which is off of the CM cluster.  I looked at the solution provided in
the manual, and it has different IP Addressing, different number
extensions (5 digits in length) etc.  It looks like it is for a
different network entirely.  Is this a mis-print in the solution manual
or is this a super advanced way to get paging to work from CME to CCM?

 

Thanks,

 

Mike




-
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.

Re: [OSL | CCIE_Voice] SRST mode

[Belicza Zsolt]

Hi!
I think you cant reach "simply" the unregistrered branch phones
(registered to SRST routers) with 4 digit dialing. This is solved in
later CM versions (like 4.2) with adding phone parameter "call forward
not registered". In Cm 4.1 you may use a translation pattern (with
partition).
Zsolt



From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Balamurugan
Singaram
Sent: Thursday, November 29, 2007 2:31 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] SRST mode


Hi,
 
BR2, phone1-3001 and phone2-3002 and HQ phone1-1001 and phone2-1002. 
 
When the BR2 is in SRST mode, can I call BR2 from HQ with normal 4 digit
number [3001] or 10 digit pstn numbers to reach BR2. 
 
Normal user from HQ will dial only the 4 digit number to reach BR2
[3001, 3002], but it is not hitting the BR2 phone at SRST mode. But I
can call BR2 with 10 digit PSTN number it hitting BR2, It is normal or I
should reach the BR2 with 4 digit number from HQ in SRST mode also.
 
Please let me know your suggestion.
 
Thanks,
Bala.

Send instant messages to your online friends
http://uk.messenger.yahoo.com 

Re: [OSL | CCIE_Voice] Need Clarification on Voice WorkbookMulitprotocol Challenge J, Section 27.15

[Vik Malhi]

I'll point you to CertTalk where somebody else pointed this out- but your
query is justified.
 
http://www.certificationtalk.com:81/showflat.php?Cat//Board/voice4twentyseve
n/Number/29433/page/0/view/collapsed/sb/5/o//fpart/1
 

Vik Malhi
CCIE Voice Instructor / Developer - IPexpert, Inc.
CCIE Voice #13890 CCSI #31584
URL: http://www.IPexpert.com  
Toll Free: +1.866.225.8064
International: +1.810.326.1444


 

  _  

From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mike Schultz
(US)
Sent: Thursday, November 29, 2007 8:41 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Need Clarification on Voice
WorkbookMulitprotocol Challenge J, Section 27.15



In that section we are instructed to configure CME in Branch 2.  In the same
section, we are also instructed to configure paging for branch 1- which is
off of the CM cluster.  I looked at the solution provided in the manual, and
it has different IP Addressing, different number extensions (5 digits in
length) etc.  It looks like it is for a different network entirely.  Is this
a mis-print in the solution manual or is this a super advanced way to get
paging to work from CME to CCM?

 

Thanks,

 

Mike


  _  

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee, you
are hereby notified that you have received this communication in error and
that any use or reproduction of this email or its contents is strictly
prohibited and may be unlawful. If you have received this communication in
error, please notify us immediately by replying to this message and deleting
it from your computer. Thank you. 

[OSL | CCIE_Voice] SIP to H323 call issue

[Ahmed Nawar]

Gents,
 I have a strange setup. I am establishing an IPIPGW the CME to te IPIPGW
is SIP and CCM to IPIPGW h323.
The call origianted from the CCM Succeed. The call from CME rings the phone
but when i answer it still rings
on the other phone nd then dropped.
Any body has any clues pls find below the config.:



User Access Verification

Password:
Branch-2#show run
Building configuration...

Current configuration : 3100 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Branch-2
!
boot-start-marker
boot system flash:c2801-ipvoicek9-mz.124-17.bin
boot-end-marker
!
logging buffered 51200 warnings
!
no aaa new-model
clock timezone gmt 2
network-clock-participate wic 2
ip cef
!
!
no ip dhcp use vrf connected
ip dhcp excluded-address 10.1.202.1 10.1.202.50
ip dhcp excluded-address 10.1.202.60 10.1.202.254
!
ip dhcp pool ipphones
   network 10.1.202.0 255.255.255.0
   default-router 10.1.202.1
   option 150 ip 10.1.202.1
!
!
no ip domain lookup
ip domain name yourdomain.com
isdn switch-type primary-net5
!
voice-card 0
!
!
!
voice service voip
 allow-connections h323 to h323
 allow-connections h323 to sip
 allow-connections sip to h323
 allow-connections sip to sip
 h323
 sip
!
!
!
!
!
!
!
!
!
!
!
!
!
username cisco password 0 cisco
!
!
controller E1 0/2/0
!
!
!
!
interface FastEthernet0/0
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface Service-Engine0/0
 no ip address
 shutdown
!
interface FastEthernet0/1
 no ip address
 duplex auto
 speed auto
!
interface FastEthernet0/1.1
 encapsulation dot1Q 130
 ip address 10.1.202.1 255.255.255.0
!
interface Serial0/3/0
 no ip address
 encapsulation frame-relay IETF
 frame-relay lmi-type ansi
!
interface Serial0/3/0.1 point-to-point
 description Link to HQ
 ip address 10.10.33.130 255.255.255.128
 frame-relay interface-dlci 102
!
interface Serial0/3/1
 no ip address
 shutdown
 clock rate 200
!
router ospf 1
 log-adjacency-changes
 network 10.1.202.0 0.0.0.255 area 0
 network 10.10.32.3 0.0.0.0 area 0
 network 10.10.33.128 0.0.0.127 area 0
 network 10.30.0.0 0.0.0.255 area 0
 network 10.130.0.0 0.0.0.255 area 0
!
ip forward-protocol nd
!
ip http server
no ip http secure-server
!
disable-eadi
!
!
!
control-plane
!
dial-peer voice 1 voip
 session protocol sipv2
 incoming called-number [12]...
!
dial-peer voice 10 voip
 destination-pattern [12]...
 session protocol sipv2
 session target ipv4:10.1.200.3
 dtmf-relay h245-alphanumeric
!
dial-peer voice 13 voip
 session protocol sipv2
 incoming called-number 3...
!
!
telephony-service
 max-ephones 10
 max-dn 10
 ip source-address 10.1.202.1 port 2000
 max-conferences 4 gain -6
 transfer-pattern 3...
!
!
ephone-dn  1
 number 3001
 description 442076303001
!
!
ephone-dn  2
 number 3002
 description 442076303002
!
!
ephone-dn  3
 number 3003
 description 442076303003
!
!
ephone  1
 mac-address 0017.951C.C0D6
 button  1:1
!
!
!
ephone  2
 mac-address 001B.0C96.BFAC
 button  1:2
!
!
!
ephone  3
 mac-address 0017.956D.CF48
!
!
!
line con 0
 login local
line aux 0
line 66
 no activation-character
 no exec
 transport preferred none
 transport input all
 transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
line vty 0 4
 privilege level 15
 password cisco
 login
 transport input telnet
line vty 5 14
 privilege level 15
 password cisco
 login
 transport input telnet
line vty 15
 privilege level 15
 login local
 transport input telnet
!
scheduler allocate 2 1000
end

Branch-2#
___


User Access Verification

Password:
HQ-Router#show run
Building configuration...

Current configuration : 3168 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname HQ-Router
!
boot-start-marker
boot system flash:c2801-ipvoicek9-mz.124-17.bin
boot-end-marker
!
card type t1 0 2
logging buffered 51200 warnings
!
no aaa new-model
no network-clock-participate wic 2
ip cef
!
no ip domain lookup
ip domain name yourdomain.com
isdn switch-type primary-ni
!
voice-card 0
 dsp services dspfarm
!
!
!
voice service voip
 allow-connections h323 to h323
 allow-connections h323 to sip
 allow-connections sip to h323
 allow-connections sip to sip
 h323
 sip
!
username cisco password 0 cisco
!
!
controller T1 0/2/0
 framing esf
 linecode b8zs
!
!
!
!
interface FastEthernet0/0
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface FastEthernet0/1
 no ip address
 duplex auto
 speed auto
!
interface FastEthernet0/1.1
 encapsulation dot1Q 1 native
 ip address 10.1.200.3 255.255.255.0
 h323-gateway voip interface
 h323-gateway voip bind srcaddr 10.1.200.3
!
interface FastEthernet0/1.110
 encapsulation dot1Q 110
 ip address 10.110.0.1 255.255.255.0
 ip helper-address 10.1.200.21
!
interface Serial0/3/0
 no ip address
 encapsulation frame-relay IETF
 clock rate 200
 frame-relay l

[OSL | CCIE_Voice] CUE

[sean hurricane]

i keep having this pesky little problem with CUE and i believe it has to do
with transcoding. Most times it works and sometimes it just doesn't. Case in
point tonite i couldn't get calls from CCM to CUE, even pasted same config
that worked the last time and it just wouldn't work. Stripped transcoder
config of all codecs except g711ulaw and g729r8 still did not work. Output
of sh sdspfarm units and sh sccp shows the trancoder as registered but calls
from CCM to CUE still fails. My lab is next week, anyone experiencing same
issue and whats the best way to troubleshoot scenario where trancoder does
not invoke?