Re: [OSL | CCIE_Voice] V3 lab module 3 SIP phone problem
I don't think the Proctor Guide explains this. The solution shows the local SIP phone configured without a username and password but the IPBlue phone is configured for it. On Sun, Mar 8, 2009 at 9:32 PM, Vik Malhi vma...@ipexpert.com wrote: Correct- once the authenticate register cmd is used it is GLOBAL for all phones. So if you are dealing only with locally attached phones then you don’t need digest authentication. If you have a mix then all phone must have a username. -- Vik Malhi – CCIE #13890, CCSI #31584 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: *vma...@ipexpert.com * Join our free online support and peer group communities: *http://www.IPexpert.com/communities http://www.ipexpert.com/communities *IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. -- *From: *Nara Shikamaru shikam...@kagadis.com *Date: *Sat, 7 Mar 2009 11:13:36 -0700 *To: *Vik Malhi vma...@ipexpert.com *Subject: *Re: [OSL | CCIE_Voice] V3 lab module 3 SIP phone problem Okay, I figured this out. To begin with, the tftp error of the phone trying to find RINGLIST.DAT has nothing to do with SIP device registration (as suspected. I still need to figure out why this file is missing from my flash, though). Anyway, the syntax in *voice global register* of *authenticate register*is what was causing the problem. In the Procter Guide, it says that this syntax is necessary for softphones because they can not register to CME via their MAC address. Phones that are installed locally, according to the PG on pg 22, authenticate with their MAC and are not subject to this issue. If *authenticate register* is configured under *voice register global*, I believe that all SIP phones configured on the CME, installed either locally or remotely, will require a username and password configured under their respective *voice register pool* syntax. Otherwise, remove the line and the phone registers fine without a username and password. On Sat, Mar 7, 2009 at 10:54 AM, Nara Shikamaru shikam...@kagadis.com wrote: Hey guys, I figured out the problem, boy do I feel dumb. I lad the DHCP lease set, for some reason, to 7. It was in a constant state of renewing it's IP. Sorry. The SIP phone in my lab is doing something funny. I've configured it just like it says in the Prctor Guide, and it's come up apparently find and I am able to so far dial SCCP phones on the CME. However, the system does not it as registered; *P1-BR2-VG#show voice regist stat Global statistics Active registrations : 0 Total SIP phones registered: 0 Total Registration Statistics Registration requests : 4 Registration success : 0 Registration failed: 4 unRegister requests: 0 unRegister success : 0 unRegister failed : 0 Register pool 1 statistics Active registrations : 0 Total SIP phones registered: 0 Total Registration Statistics Registration requests : 0 Registration success : 0 Registration failed: 0 unRegister requests: 0 unRegister success : 0 unRegister failed : 0 * Also, in the TFTP events, I get a weird error that the phone is looking for the RINGLIST.DAT. The complete sequence of messages on screen after a factory reset looks like this; *P1-BR2-VG# * Mar 7 18:45:12: %DTP-5-TRUNKPORTON: Port Fa0/2/2 has become dot1q trunk Mar 7 18:45:13: %LINK-3-UPDOWN: Interface FastEthernet0/2/2, changed state to up Mar 7 18:45:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2/2, changed state to up Mar 7 18:45:48: TFTP: Looking for CTLSEPmacaddress.tlv Mar 7 18:45:48: TFTP: Looking for SEPmacaddress.cnf.xml Mar 7 18:45:48: TFTP: Looking for SIPmacaddress.cnf Mar 7 18:45:48: TFTP: Opened flash:/SIPmacaddress.cnf, fd 7, size 1220 for process 341 Mar 7 18:45:49: TFTP: Finished flash:/SIPmacaddress.cnf, time 00:00:00 for process 341 Mar 7 18:45:49: TFTP: Looking for P0S3-08-6-00.loads Mar 7 18:45:49: TFTP: Opened flash:phone/7940-7960/P0S3-08-6-00.loads, fd 7, size 459 for process 341 Mar 7 18:45:49: TFTP: Finished flash:phone/7940-7960/P0S3-08-6-00.loads, time 00:00:00 for process 341 Mar 7 18:46:07: TFTP: Looking for SIPDefault.cnf Mar 7 18:46:07: TFTP: Opened flash:/SIPDefault.cnf, fd 7, size 1889 for process 341 Mar 7 18:46:07: TFTP: Finished flash:/SIPDefault.cnf, time 00:00:00 for process 341 Mar 7 18:46:07: TFTP: Looking for SIPmacaddress.cnf Mar 7 18:46:07: TFTP: Opened flash:/SIPmacaddress.cnf, fd 7, size 1220 for process 341 Mar 7 18:46:07: TFTP: Finished flash:/SIPmacaddress.cnf, time 00:00:00 for process 341 Mar 7 18:46:09:
[OSL | CCIE_Voice] Study Material for Version 3
Hi all, I'm gathering material for V3 and would like a sanity check of the material I have and need. 1. Firstly if I purchase the latest material from Ipexpert is that V3 material? 2. For CUCM I'll using the SRND, Cisco Unified Communications Manager System Guide and Cisco Unified Communications Manager Features and Services Guide. 3. For CUPS, Deployment guide for CUPS 7,( need more material, seems light on) 4. CUC,System Administration Guide for Cisco Unity Connection. 5.CME System Admin guide and SRND 6.GK IOS guide 12.4 Configuring H.323 gatekeepers and proxies, As you can seen I've probably only got CUCM, CME and possibly GK well covered. Going through the remainder of the blueprint, I need good references and material for the following MGCP SIP IP-IP Gateway/CUBE Mobility and Single Number Reach SRST AAR Implement and Troubleshoot Media Resources Cisco Unity Express Call Handling and Routing Implement and Troubleshoot Cisco Unified Presence CUCM Presence Cisco Unified Presence Server Integration Cisco Unified Contact Center Express Advanced Configuration Script Customization Redundancy Implement and Troubleshoot QoS and CAC L2/L3 Traffic Classifications and Policing L2/L3 Queuing Mechanisms L2 LFI RSVP Call Admission Control what are people using for the above, is there good material for the above topics on CCO ? If not what are other people using? TIA
[OSL | CCIE_Voice] 7911 Phone registration problem
Hi Friends, I am trying to register cisco 7911 phone with callManager 4.1, But I am receiving an error Registration Rejected : Error... Can anybody help me in this regard? Thanks and Best Regards Asif Raza _ Windows Live™: Life without walls. http://windowslive.com/explore?ocid=TXT_TAGLM_WL_allup_1a_explore_032009
[OSL | CCIE_Voice] Strange - Why CCM and CME exclusively register to Gatekeeper?
Strange - Why CCM and CME exclusively register to Gatekeeper? Ie, at any time only one CCM pub or CME able to register to Gatekeeper. They cannot register to GK at same time. For instance, when CCM pub register first to GK, in CME site, it should 'registration failed after retry 2'; when CME register first to GK, CCM cannot register. All of networks are reachable. Here is GK configure: - gatekeeper zone local GK ccievoice.com 2.1.1.1 zone prefix 2 gw-priority 10 HQ-Trunk_2 zone prefix 2 gw-priority 9 HQ-Trunk_1 zone prefix 4 gw-priority 10 CME-HKG gw-type-prefix 1# no shut Here is Gateway config: --- int loopback0 ip address 2.3.3.3 255.255.255.0 h323-gateway voip interface h323-gateway voip id GK ipaddr 2.1.1.1 h323-gateway voip h323-id CME-HKG h323-gateway voip tech-prefix 1# h323-gateway voip bind src 2.3.3.3 gateway Here is CCM site config: 1. Configure Gatekeeper: 2.1.1.1 2. Configure Trunk: HQ-Trunk, GK:2.1.1.1, Type: Gateway, Zone: GK, TechPrefix: 1# _ More than messages–check out the rest of the Windows Live™. http://www.microsoft.com/windows/windowslive/
Re: [OSL | CCIE_Voice] 7911 Phone registration problem
I'm assuming here that you're attempting to auto register the phone. In addition to the device pack required to get support for the 7911, you should confirm that the server it is attempting to register with is enabled for auto registration. Sometimes, if you're dealing with this, it's attempting to register to the wrong side (where is option 150 pointed?). You can shortcut this by simply turning on auto registration on both sides for troubleshooting. Another possibility is that the phone has picked up a security configuration along the way. If that's the case, you may need to do a reset to factory defaults to clear it. Cliff - Original Message - From: asif raza To: CCIE-Voice Sent: Monday, March 09, 2009 5:26 AM Subject: [OSL | CCIE_Voice] 7911 Phone registration problem Hi Friends, I am trying to register cisco 7911 phone with callManager 4.1, But I am receiving an error Registration Rejected : Error... Can anybody help me in this regard? Thanks and Best Regards Asif Raza -- Windows Live™: Keep your life in sync. Check it out.
[OSL | CCIE_Voice] Easyvpn issue with ASA5505
I'll start by saying that i'm very green on the ASA. Just bought ASA5505 for sole purpose to use with Voice Rack - Easyvpn. During my last voice rack session. I followed instructions (write erase, reload) then copied and pasted config I got for ASA5505 from proctor labs for rack 33. First problem was their was a syntax error on statement secure-unit-authentication enable. Quick search reveled that this command should be under group-policy, but it is not under ASA config I downloaded form proctorlabs. Second the commands below were not accepted on the ASA. ( tried both 8.x and 7.x on asa, commands not accepted). crypto ipsec client ezvpn connect crypto ipsec client ezvpn xauth. I did do a vpnclient connect and then authentication came up and I put in username/password, then did show command and saw tunnel established. But I was not able to ping servers (nor get phones registered). My pc was on same inside vlan as phones and I was able to connect to proctor lab routers without issue. I also loaded final LabA config but still unable to ping/connect to UCM (but from hq-rtr I was able to ping UCM). Any guidance is appreciated. I want to get started on labs and use my phones at home. Regards, _ Express your personality in color! Preview and select themes for Hotmail®. http://www.windowslive-hotmail.com/LearnMore/personalize.aspx?ocid=TXT_MSGTX_WL_HM_express_032009#colortheme
Re: [OSL | CCIE_Voice] V3 Lab 6 problem
Response in-line. From: Cliff McGlamry cl...@mcglamry.net Date: Mon, 9 Mar 2009 01:00:29 -0400 To: Vik Malhi vma...@ipexpert.com, OSL Group ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] V3 Lab 6 problem Oklet me see if I have this straight: 1. You have a GK between CCM and CME as primary for call routing 2. You have a direct connection between the two as a trunk or some type of gateway When a call comes IN from CME to CCM, it uses the settings from #2 for both call types unless there is a CUBE terminating the signaling on the GK? Is that what you're saying? VIK: YES. Second question...I was reading an article you wrote last year. I can see how you could define CME as just a gateway. You can also define an intercluster trunk between them (non GK controlled). Is one better than the otherand why? VIK: Gateway- but not too important. Possibility of running into Ringback and Answer Supervision problems when using ICT to CME. TIA Cliff - Original Message - From: Vik Malhi mailto:vma...@ipexpert.com To: Cliff McGlamry mailto:cl...@mcglamry.net Cc: ccie_voice@onlinestudylist.com mailto:ccie_voice@onlinestudylist.com Sent: Monday, March 09, 2009 12:00 AM Subject: Re: [OSL | CCIE_Voice] V3 Lab 6 problem The k character is from ip blue. Close this down and relaunch and you shouldn't see it. Regarding your issue, if the signaling ip of the cme is defined in ccm, as an h323 gateway for example, then the gateway settings are used for inbound calls- css, sig digits, etc...and NOT the trunk. Vik Malhi - CCIE#13890 Senior Technical Instructor - IPexpert Inc Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com mailto:vma...@ipexpert.com Join IPexpert's Free CCIE Peer Groups Study Communities at www.IPexpert.com/communities http://www.IPexpert.com/communities http://www.IPexpert.com/communities On Mar 8, 2009, at 8:58 PM, Cliff McGlamry cl...@mcglamry.net wrote: Well, after tearing it down and rebuilding it, it initially failed again. As I walked through and began checking things, I noticed that the name of the trunk had gotten corrupted this time around. For some reason when on the VPN, it seems like occasionally it will add several k characters to the end of things when I go to move between fields. My trunk which was supposed to be named GKTrunk Was named GKTrunkkk. This didn't match the name set up in the CCM Service parameters for using port 1720, so at least I know that's why it failed the last time. But I really can't explain what happened the first time still. It was probably something similar, but the experience of walking through it several times, researching various things I didn't understand, etcthat's what this process is all about. Cliff - Original Message - From: Cliff McGlamry mailto:cl...@mcglamry.net To: ccie_voice@onlinestudylist.com mailto:ccie_voice@onlinestudylist.com Sent: Sunday, March 08, 2009 9:11 PM Subject: Re: [OSL | CCIE_Voice] V3 Lab 6 problem This is so strange. I got in the lab this evening exclusively to work on this problem. Was immediately able to duplicate it. Calls outbound CCM to CME would work. Calls CME to CCM would fail. Moved things around...restarted thingsnothing Finally, went over and fired up full debug traces on both servers. Wouldn't you know that it worked the first time after that. I still can't figure out what caused it...so I'm going to reset the CCM's and start again. I'm sure the issue is over there. - Original Message - From: Kumar, Narinder mailto:narinder.ku...@uxcg.com.au To: Cliff McGlamry mailto:cl...@mcglamry.net Sent: Sunday, March 08, 2009 7:47 PM Subject: RE: [OSL | CCIE_Voice] V3 Lab 6 problem Are you using software MTP or hardware resources ?? Try hardware resources. From: Cliff McGlamry [mailto:cl...@mcglamry.net] Sent: Monday, 9 March 2009 1:20 AM To: Kumar, Narinder; ccie_voice@onlinestudylist.com mailto:ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] V3 Lab 6 problem Is there a specific reason you are using Inbound/outbound fast start on the trunk ? Try uncheck and see if that works. The inbound and outbound fast start are for early media in case you are going from H232 to SIP ( Need to double check my statement) Tried it both ways. Made no difference. You are using alias static , have you updated the service parameter in the CCM service parameter ? Also you shouldn¹t be using the HQ location on the GK ( All this may not be related to ur problem, I noticed that¹s why pointed out) Yes. And rechecked this about 14 times. what do you see in deb gatekeeper main 10. Do you mind
Re: [OSL | CCIE_Voice] Easyvpn issue with ASA5505
Hi Mark, I'm not connected now, this actually occured last week. If you have time I can connect to troubleshoot anytime after 5:30 EST. If you can't tonight, this is not urgent. But I would like to be able to get resolved by Saturday so I can get some lab work in over the weekend. Best Regards, Daniel CC: ccie_voice@onlinestudylist.com From: ms...@ipexpert.com To: drd20...@hotmail.com Subject: Re: [OSL | CCIE_Voice] Easyvpn issue with ASA5505 Date: Mon, 9 Mar 2009 15:24:09 -0400 Hi Daniel, I will fix the part where the secure-unit-authentication enable is in the incorrect place. Are you still connected? If so, can you setup telnet to your ASA from anywhere telnet 0 0 0 0 (I believe is the command off the top of my head)?I will then connect and help you troubleshoot your session so that it will work properly now and in the future. Thanks! -- Mark SnowCCIE #14073 (Voice, Security) Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444Fax: +1.309.413.4097Mailto: ms...@ipexpert.com--join our free online support and peer group communities: http://www.IPexpert.com/communities--IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications.-- On Mar 9, 2009, at 11:24 AM, Daniel Dellinger wrote:I'll start by saying that i'm very green on the ASA. Just bought ASA5505 for sole purpose to use with Voice Rack - Easyvpn. During my last voice rack session. I followed instructions (write erase, reload) then copied and pasted config I got for ASA5505 from proctor labs for rack 33. First problem was their was a syntax error on statement secure-unit-authentication enable. Quick search reveled that this command should be under group-policy, but it is not under ASA config I downloaded form proctorlabs. Second the commands below were not accepted on the ASA. ( tried both 8.x and 7.x on asa, commands not accepted). crypto ipsec client ezvpn connect crypto ipsec client ezvpn xauth. I did do a vpnclient connect and then authentication came up and I put in username/password, then did show command and saw tunnel established. But I was not able to ping servers (nor get phones registered). My pc was on same inside vlan as phones and I was able to connect to proctor lab routers without issue. I also loaded final LabA config but still unable to ping/connect to UCM (but from hq-rtr I was able to ping UCM). Any guidance is appreciated. I want to get started on labs and use my phones at home. Regards, Express your personality in color! Preview and select themes for Hotmail®. See how. _ Windows Live™ Contacts: Organize your contact list. http://windowslive.com/connect/post/marcusatmicrosoft.spaces.live.com-Blog-cns!503D1D86EBB2B53C!2285.entry?ocid=TXT_TAGLM_WL_UGC_Contacts_032009
[OSL | CCIE_Voice] DSCP marking on NM-ESW module
Hi List, I tried to mark SCCP/RTP traffic on ESW module, but the policy got rejected with a message the it doesn't support range keyword in access-list. Any other workaround to mark all SCCP and RTP packets to respective DSCP values on this module? I could successfully do it on Cat 3550 with access-list + port range though. Thanks _ The new Windows Live Messenger. You don’t want to miss this. http://www.microsoft.com/india/windows/windowslive/messenger.aspx
Re: [OSL | CCIE_Voice] DSCP marking on NM-ESW module
Can you use ³match protocol skinny² and ³match protocol rtp²? -- Vik Malhi CCIE #13890, CCSI #31584 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: Kapil Atrish kapilatr...@hotmail.com Date: Tue, 10 Mar 2009 02:23:28 +0530 To: OSL Group ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] DSCP marking on NM-ESW module Any other workaround to mark all SCCP and RTP packets to respective DSCP values on this module? I could successfully do it on Cat 3550 with access-list + port range though.
Re: [OSL | CCIE_Voice] Different FRTS command structure in diffrent versions of QoS SRND docs.
Version 3.3 is the lab. Nov 2005. It sounds like there is a reference to the older version of the SRND... Vik Malhi - CCIE#13890 Senior Technical Instructor - IPexpert Inc Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join IPexpert's Free CCIE Peer Groups Study Communities at www.IPexpert.com/communities On Mar 9, 2009, at 7:16 PM, Gabriel Ruiz gr...@adxtech.com wrote: Which is the version of the QoS SRND that is avaialable in the LAB?. I was reading the QoS 3.3 and just notice that the commant structure for FRTS is different that the one from the IPExpert workbook. Below is the example for FRTS for slow links. It differs from the one in the workbooks. I found an old version of the SRND and it matches the one on the workbooks. Should I follow the one below or stick to one in the workbook?. Or maybe both will work?. Please let me know. Thanks. policy-map MQC-FRTS-768 class class-default shape average 729600 7296 0 ! Enables MQC-Based FRTS service-policy WAN-EDGE ! Queues packets headed to the shaper ! interface Serial2/0 no ip address encapsulation frame-relay ! interface Serial2/0.12 point-to-point ip address 10.1.121.1 255.255.255.252 description 768kbps FR Circuit to RBR-3745-Left frame-relay interface-dlci 102 class FR-MAP-CLASS-768 ! Binds the map-class to the FR DLCI ! map-class frame-relay FR-MAP-CLASS-768 service-policy output MQC-FRTS-768 ! Attaches nested MQC policies to map-class frame-relay fragment 960 ! Enables FRF.12 CONFIDENTIALITY NOTICE: This e-mail transmission may contain confidential or legally privileged information that is intended only for the individual or entity named in the e-mail address. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or reliance upon the contents of this e-mail is strictly prohibited. If you have received this e-mail transmission in error, please notify the sender of the delivery error by replying to this message, then delete it from your system, and destroy all copies. Thank you.
[OSL | CCIE_Voice] h.323 gateway config call preserve
Hi, For h.323 gateway config call preserve in BR1 site the following config are ok, please some one comment on h.323 gateway config call preservation ? voice class h323 1 h225 timeout tcp establish 3 interface loopback 0 h323-gateway voip bind srcaddr 172.27.x.x dial-peer voice 10 voip destination-pattern 2...$ session target ipv4:172.3.64.100 dtmf-relay h245-alphanumeric no huntstop voice-class h323 1 no vad ! dial-peer voice 11 voip destination-pattern 2...$ session target ipv4:172.3.64.101 dtmf-relay h245-alphanumeric preference 1 voice-class h323 1 no vad ! dial-peer voice 9 pots destination-pattern 9T port 0/0/0:23 ! on Service parameter: Stop routing on Unallocated number flag - false Thanks Get your preferred Email name! Now you can @ymail.com and @rocketmail.com. http://mail.promotions.yahoo.com/newdomains/aa/
