[OSL | CCIE_Voice] CUCM OS Account
Hey Guys I want to create another Account to ( Admin ) for the OS of CUCM beside the default one which was created during initial setup ... is it possible and how ? also I want to create another admin account for web gui administration with full control I made a copy of the current admin user for the web gui and changed the name and the password for the new user under application user page but the thing is there is a tick box beside it which means it can be deleted ...! I want it be immune to deletion ... is it possible ? -- Thanks Best Regards The only way of finding the limits of the possible is by going beyond them into the impossible No matter how many goals you have achieved, you must set your sights on a higher one ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CUCM OS Account
I dont think its possible except for the first platform admin account. On Tue, Nov 1, 2011 at 1:14 PM, Mohamed Saad e.mohamed.s...@gmail.comwrote: Hey Guys I want to create another Account to ( Admin ) for the OS of CUCM beside the default one which was created during initial setup ... is it possible and how ? also I want to create another admin account for web gui administration with full control I made a copy of the current admin user for the web gui and changed the name and the password for the new user under application user page but the thing is there is a tick box beside it which means it can be deleted ...! I want it be immune to deletion ... is it possible ? -- Thanks Best Regards The only way of finding the limits of the possible is by going beyond them into the impossible No matter how many goals you have achieved, you must set your sights on a higher one ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Ravindra Lakpriya ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CUCM OS Account
Hi Saad, If you would like to create a new OS admin account and password, use the 'set account' CLI command. For example, in your case, you could enter 'set account newosadmin'. The output should appear as follows: admin:set account newosadmin Privilege Levels are: Ordinary - Level 0 Advanced - Level 1 Please enter the privilege level :1 Please enter the password :* re-enter to confirm :* Account successfully created Please try and confirm. Regards, Brajesh. On Tue, Nov 1, 2011 at 2:44 PM, Mohamed Saad e.mohamed.s...@gmail.com wrote: Hey Guys I want to create another Account to ( Admin ) for the OS of CUCM beside the default one which was created during initial setup ... is it possible and how ? also I want to create another admin account for web gui administration with full control I made a copy of the current admin user for the web gui and changed the name and the password for the new user under application user page but the thing is there is a tick box beside it which means it can be deleted ...! I want it be immune to deletion ... is it possible ? -- Thanks Best Regards The only way of finding the limits of the possible is by going beyond them into the impossible No matter how many goals you have achieved, you must set your sights on a higher one ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] ATA187 issues with Franking machines
HI All, We currently have a situation where our franking machines are not supported by the new ATA 187 in CUCM 8.5.1. *On the ATA 187* The sw version is 187.9-0-3-0 *On the CUCM * As with the new ATA’s all the setup is done in the CUCM and all the setup is kept to the defaults. My codecs are 64 kbps (G.722, G.711). Have ticked the Media Termination Point Required and MTP preferred originating Codec is set to 711alaw. Fax mode is fax pass-through Fax rate is 14400bps *On the Gateways* We are having MGCP gateways Where the setup related to Fax’s are no ccm-manager fax protocol cisco mgcp fax t38 inhibit mgcp modem passthrough voip mode nse I have tested the ATA with an analogue phone and can dial in –out. I have tested ATA with fax’s and they are okay. Tested with modems and they are okay too. But when used with these Franking machines –even though the machine can dial out a landline number but comes up with a message that no dial-tone /line busy. Have tested the franking machine with an analogue line and that works okay. (the number which the franking machine dials gives a fax tone if dialled from a voip phone) a friend in a different company has the same issue and is suggesting a firmware issue with these new ATA187 Thanks for any help. -- Abbas ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] ATA187 issues with Franking machines
What is a franking machine? Sent from my iPhone On Nov 1, 2011, at 5:13 AM, abbas Wali abba...@gmail.com wrote: HI All, We currently have a situation where our franking machines are not supported by the new ATA 187 in CUCM 8.5.1. On the ATA 187 The sw version is 187.9-0-3-0 On the CUCM As with the new ATA’s all the setup is done in the CUCM and all the setup is kept to the defaults. My codecs are 64 kbps (G.722, G.711). Have ticked the Media Termination Point Required and MTP preferred originating Codec is set to 711alaw. Fax mode is fax pass-through Fax rate is 14400bps On the Gateways We are having MGCP gateways Where the setup related to Fax’s are no ccm-manager fax protocol cisco mgcp fax t38 inhibit mgcp modem passthrough voip mode nse I have tested the ATA with an analogue phone and can dial in –out. I have tested ATA with fax’s and they are okay. Tested with modems and they are okay too. But when used with these Franking machines –even though the machine can dial out a landline number but comes up with a message that no dial-tone /line busy. Have tested the franking machine with an analogue line and that works okay. (the number which the franking machine dials gives a fax tone if dialled from a voip phone) a friend in a different company has the same issue and is suggesting a firmware issue with these new ATA187 Thanks for any help. -- Abbas ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] ATA187 issues with Franking machines
My clients had to reprogram them to new cucm addreasess and all is golden Sent from my HTC on the Now Network from Sprint! - Reply message - From: Rrcrumm rrcr...@yahoo.com Date: Tue, Nov 1, 2011 1:43 pm Subject: [OSL | CCIE_Voice] ATA187 issues with Franking machines To: abbas Wali abba...@gmail.com Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] ATA187 issues with Franking machines
A franking machine stamps postage onto an elvelope or package. It is commonly known as a postage meter in the US. Thanks, Michael Miller CCIE# 28901 (RS) On Tue, Nov 1, 2011 at 5:43 PM, Rrcrumm rrcr...@yahoo.com wrote: What is a franking machine? Sent from my iPhone On Nov 1, 2011, at 5:13 AM, abbas Wali abba...@gmail.com wrote: HI All, We currently have a situation where our franking machines are not supported by the new ATA 187 in CUCM 8.5.1. *On the ATA 187* The sw version is 187.9-0-3-0 *On the CUCM * As with the new ATA’s all the setup is done in the CUCM and all the setup is kept to the defaults. My codecs are 64 kbps (G.722, G.711). Have ticked the Media Termination Point Required and MTP preferred originating Codec is set to 711alaw. Fax mode is fax pass-through Fax rate is 14400bps *On the Gateways* We are having MGCP gateways Where the setup related to Fax’s are no ccm-manager fax protocol cisco mgcp fax t38 inhibit mgcp modem passthrough voip mode nse I have tested the ATA with an analogue phone and can dial in –out. I have tested ATA with fax’s and they are okay. Tested with modems and they are okay too. But when used with these Franking machines –even though the machine can dial out a landline number but comes up with a message that no dial-tone /line busy. Have tested the franking machine with an analogue line and that works okay. (the number which the franking machine dials gives a fax tone if dialled from a voip phone) a friend in a different company has the same issue and is suggesting a firmware issue with these new ATA187 Thanks for any help. -- Abbas ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Fwd: ATA187 issues with Franking machines
The franking machine uses a modem to print stamps on the letter and counts the number of times it does it. On 1 November 2011 17:43, Rrcrumm rrcr...@yahoo.com wrote: What is a franking machine? Sent from my iPhone On Nov 1, 2011, at 5:13 AM, abbas Wali abba...@gmail.com wrote: HI All, We currently have a situation where our franking machines are not supported by the new ATA 187 in CUCM 8.5.1. *On the ATA 187* The sw version is 187.9-0-3-0 *On the CUCM * As with the new ATA’s all the setup is done in the CUCM and all the setup is kept to the defaults. My codecs are 64 kbps (G.722, G.711). Have ticked the Media Termination Point Required and MTP preferred originating Codec is set to 711alaw. Fax mode is fax pass-through Fax rate is 14400bps *On the Gateways* We are having MGCP gateways Where the setup related to Fax’s are no ccm-manager fax protocol cisco mgcp fax t38 inhibit mgcp modem passthrough voip mode nse I have tested the ATA with an analogue phone and can dial in –out. I have tested ATA with fax’s and they are okay. Tested with modems and they are okay too. But when used with these Franking machines –even though the machine can dial out a landline number but comes up with a message that no dial-tone /line busy. Have tested the franking machine with an analogue line and that works okay. (the number which the franking machine dials gives a fax tone if dialled from a voip phone) a friend in a different company has the same issue and is suggesting a firmware issue with these new ATA187 Thanks for any help. -- Abbas ___ For more information regarding industry leading CCIE Lab training, please visit http://www.ipexpert.comwww.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out http://www.PlatinumPlacement.comwww.PlatinumPlacement.com -- Abbas -- Abbas ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] ATA187 issues with Franking machines
we logged a Ticket with Cisco and got a very discouraging reply as below.. Problem Description If I understand the issue correctly, Franking machine connected on the ATA 187 are not working. Let me know if my understanding of the issue is correct. Franking machine will not work when connected to ATA 187 + The franking machine uses a modem to print stamps on the letter and counts the number of times it does it. + Franking machine works on modem technology and ATA's only supports FAX passthrough and NOT modem passthrough, so this won't work behind an ATA. However, connecting the Franking machine directly to the FXS port on the gateway should work. Configuring and Troubleshooting the Cisco ATA 186 with Fax http://tools.cisco.com/squish/Fd218 The the above document is for ATA 186 however it's good for ATA 187 also in terms for using for modem calls. As per the above document: Note: ATA 186 is not supported for analog modem calls. The modem referred to throughout the documentation implies fax modem. Action Plan - + Franking machine will work if connected with FXS on GTWY/VG224/VG202/VG204. + Connect the franking machine on device listed above. On 1 November 2011 19:20, abbas Wali abba...@gmail.com wrote: The franking machine uses a modem to print stamps on the letter and counts the number of times it does it. On 1 November 2011 17:43, Rrcrumm rrcr...@yahoo.com wrote: What is a franking machine? Sent from my iPhone On Nov 1, 2011, at 5:13 AM, abbas Wali abba...@gmail.com wrote: HI All, We currently have a situation where our franking machines are not supported by the new ATA 187 in CUCM 8.5.1. *On the ATA 187* The sw version is 187.9-0-3-0 *On the CUCM * As with the new ATA’s all the setup is done in the CUCM and all the setup is kept to the defaults. My codecs are 64 kbps (G.722, G.711). Have ticked the Media Termination Point Required and MTP preferred originating Codec is set to 711alaw. Fax mode is fax pass-through Fax rate is 14400bps *On the Gateways* We are having MGCP gateways Where the setup related to Fax’s are no ccm-manager fax protocol cisco mgcp fax t38 inhibit mgcp modem passthrough voip mode nse I have tested the ATA with an analogue phone and can dial in –out. I have tested ATA with fax’s and they are okay. Tested with modems and they are okay too. But when used with these Franking machines –even though the machine can dial out a landline number but comes up with a message that no dial-tone /line busy. Have tested the franking machine with an analogue line and that works okay. (the number which the franking machine dials gives a fax tone if dialled from a voip phone) a friend in a different company has the same issue and is suggesting a firmware issue with these new ATA187 Thanks for any help. -- Abbas ___ For more information regarding industry leading CCIE Lab training, please visit http://www.ipexpert.comwww.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out http://www.PlatinumPlacement.comwww.PlatinumPlacement.com -- Abbas -- Abbas -- Abbas ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] [How to make an ISO from DVD's]
Greetings, I've got a set of CUCM CUWL Disks and I want to turn them into an .iso image so I can burn them to a VM. Any suggestions or knowledge share would be appreciated. -Thanks. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] [How to make an ISO from DVD's]
There must be a million ways to do this. Google is your friend. I like Infra Recorder, mainly because it is light and open source. http://infrarecorder.org - Reply message - From: michael.se...@compucom.com Date: Tue, Nov 1, 2011 6:37 pm Subject: [OSL | CCIE_Voice] [How to make an ISO from DVD's] To: ccie_voice@onlinestudylist.com Greetings, I've got a set of CUCM CUWL Disks and I want to turn them into an .iso image so I can burn them to a VM. Any suggestions or knowledge share would be appreciated. -Thanks. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] [How to make an ISO from DVD's]
Did u try google first ? Regards Amit Sent from my iPad On 2/11/2011, at 11:37 AM, michael.se...@compucom.com wrote: Greetings, I’ve got a set of CUCM CUWL Disks and I want to turn them into an .iso image so I can burn them to a VM. Any suggestions or knowledge share would be appreciated. –Thanks. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Quick Question
I have a quick question. I have to do a demo with a UC500 at a hotel and the onsite engineer will only allow a connections into a wall Jack. My question is can I connect the FXS port to the wall jack and route a call from the PSTN. The hotel is going to provide a DID for the demo. They will not let us connect directly into switch port on their PBX. He said he would provide me an IP Address but no connection to the PBX. ___ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Quick Question
If by wall jack you mean analog line from the provider then just plug it into one of the FXO lines and PLAR the call to either the auto attendant or a phone. Outbound calling will work also, just not at the same time. Sent from my iPhone On Nov 1, 2011, at 7:17 PM, Jonathan Preston jonathan_preston2...@yahoo.com wrote: I have a quick question. I have to do a demo with a UC500 at a hotel and the onsite engineer will only allow a connections into a wall Jack. My question is can I connect the FXS port to the wall jack and route a call from the PSTN. The hotel is going to provide a DID for the demo. They will not let us connect directly into switch port on their PBX. He said he would provide me an IP Address but no connection to the PBX. ___ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
