[OSL | CCIE_Voice] Inter Cluster Extension Mobility
Hi, Is there any "tweak" to implement Ext Mobility Inter Cluster environment on CUCM 7.x? And would ver 8.x address this? Regards Sam Wilson ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] MoH not working for PSTN
Hi, We have a working MoH for one site and when I tried to use similar configuration for a different site, it seems something went missing. oprtr02#sh ccm-manager music-on-hold Current active multicast sessions : 1 Multicast RTP port Packets Call CodecIncoming Address number in/outid Interface === 239.1.1.1 16384 0/0 562 g711ulaw This is the config when a call is placed on hold, now usually we do see the numbers incrementing on the Packets In/Out column however it seems that there is no activity as its always 0/0. Any help will be greatly appreciated. Regards Wilson Samuel ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] MoH not working for PSTN
Hi, Yes we do, infact the show ephone summary shows that there is an err with the file, though I have copied this file multiple times from working routers and yet the err remains: Max Conferences 8 with 0 active (4 allowed) Skinny Music On Hold Status Active MOH clients 0 (max 320), Media Clients 0, B-ACD Clients 0 File Allegro.ulaw.wav type INVALID Media_Payload_G711Ulaw64k 160 bytes Regards Sam Wilson On Tue, Apr 20, 2010 at 8:43 PM, Mad Kiwi wrote: > Hi, > > Did you include in route statement in your your loopback interface? > > eg.. multicast 239.1.1.1 port 16384 route > > cheers > > kiwi > > On Wed, Apr 21, 2010 at 7:42 AM, Sam Wilson wrote: > >> Hi, >> >> We have a working MoH for one site and when I tried to use similar >> configuration for a different site, it seems something went missing. >> >> oprtr02#sh ccm-manager music-on-hold >> Current active multicast sessions : 1 >> Multicast RTP port Packets Call CodecIncoming >> Address number in/outid Interface >> === >> 239.1.1.1 16384 0/0 562 g711ulaw >> >> >> This is the config when a call is placed on hold, now usually we do see >> the numbers incrementing on the Packets In/Out column however it seems that >> there is no activity as its always 0/0. >> >> Any help will be greatly appreciated. >> >> Regards >> Wilson Samuel >> >> ___ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> > ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Cisco Website during Lab
Hi, I have not sat in lab yet, so it's just a guess, and those have sat, may fear the wrath of NDA god :( I guess that we will have access to the Cisco.com/go/support Anyone else want to chime in ? Regards On Saturday, January 26, 2013, Barrera, Hugo wrote: > Greetings, > > ** ** > > I just wanted to confirm is there actual access to the Cisco website, > specifically the following path during the lab?? > > ** ** > > *Products->voice and unified communication->customer collaboration->cisco > unified contact center products->UCCX* > > ** ** > > ** ** > > *Hugo * > > ** ** > ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Failed Voice Lab
Oh feel the pain, brother. Do you mind to share what section costed you the most. Kind regards Sam Wilson On Thursday, January 31, 2013, Ben John wrote: > Guys, > i took my lab last week in SJ and i failed again that was my fourth > attempt. i got everything working tested and i was confident i will get it > this time but when i got my result i was disappointed i don't feel like > going back again i feel like i am not spending enough times with my family > and it cost me almost 2K for each attempt. i have seen all the labs as far > as i know i don't if i do go back which one i will get and there is no > guaranty i will pass it looks like i am doing the way cisco wants it. i am > really down right the good thing is i can do Voice. > > Thanks, > > Ben > ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] ACS 2509 Issues
Hi Try entering "no service config" in the config mode, save the config and reload the router Hope that help, Rwgards Sent from my Windows Phone -- From: Hesham Abdelkereem Sent: 8/26/2013 1:05 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] ACS 2509 Issues Dear Experts, I have Cisco ACS 2509 using it for labs. I have suffering couple of issues with it First when I turn on the device i get the following System Bootstrap, Version 11.0(10c), SOFTWARE Copyright (c) 1986-1996 by cisco Systems 2500 processor with 16384 Kbytes of main memory > > > > Then I hit B to boot then I get the following Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco Internetwork Operating System Software IOS (tm) 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1) Copyright (c) 1986-1996 by cisco Systems, Inc. Compiled Fri 27-Dec-96 17:33 by loreilly Image text-base: 0x0101, data-base: 0x1000 cisco 2509 (68030) processor (revision D) with 16384K/2048K bytes of memory. Processor board ID 01886520, with hardware revision X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. 1 Ethernet/IEEE 802.3 interface. 2 Serial network interfaces. 8 terminal lines. 32K bytes of non-volatile configuration memory. 16384K bytes of processor board System flash (Read/Write) Loading network-confg ... [timed out] Loading cisconet.cfg ... [timed out] Loading acserver-confg ... [timed out] Loading acserver.cfg ... [timed out] Press RETURN to get started! I always get these messages for infinity Loading network-confg ... [timed out] Loading cisconet.cfg ... [timed out] Loading acserver-confg ... [timed out] Loading acserver.cfg ... [timed out] Then finally when I access any device connected to the ASYNC cable I am able to connect but not unable to exit the session I hit Ctrl + Shift + 6 + X many times by the Laptop keyboard and even by On-Screen keyboard and still nothing is working well. I have tried to do the following workaround 1-I have another 2509 which has a defective ASYNC Socket , I removed all the Memories and stuff and put it in the other one and still get the same results. Your help would be highly appreciated. Thank you very much in advance, ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] ACS 2509 Issues
Sorry hit the enter too fast last time and sent you the reply. Since you mention you are using laptop keyboard, that must be the issue as to enter or type ^ you have to know the correct combination of the keys unlike the most desktop keyboards Hope that helps Sent from my Windows Phone -- From: Hesham Abdelkereem Sent: 8/26/2013 1:05 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] ACS 2509 Issues Dear Experts, I have Cisco ACS 2509 using it for labs. I have suffering couple of issues with it First when I turn on the device i get the following System Bootstrap, Version 11.0(10c), SOFTWARE Copyright (c) 1986-1996 by cisco Systems 2500 processor with 16384 Kbytes of main memory > > > > Then I hit B to boot then I get the following Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco Internetwork Operating System Software IOS (tm) 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1) Copyright (c) 1986-1996 by cisco Systems, Inc. Compiled Fri 27-Dec-96 17:33 by loreilly Image text-base: 0x0101, data-base: 0x1000 cisco 2509 (68030) processor (revision D) with 16384K/2048K bytes of memory. Processor board ID 01886520, with hardware revision X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. 1 Ethernet/IEEE 802.3 interface. 2 Serial network interfaces. 8 terminal lines. 32K bytes of non-volatile configuration memory. 16384K bytes of processor board System flash (Read/Write) Loading network-confg ... [timed out] Loading cisconet.cfg ... [timed out] Loading acserver-confg ... [timed out] Loading acserver.cfg ... [timed out] Press RETURN to get started! I always get these messages for infinity Loading network-confg ... [timed out] Loading cisconet.cfg ... [timed out] Loading acserver-confg ... [timed out] Loading acserver.cfg ... [timed out] Then finally when I access any device connected to the ASYNC cable I am able to connect but not unable to exit the session I hit Ctrl + Shift + 6 + X many times by the Laptop keyboard and even by On-Screen keyboard and still nothing is working well. I have tried to do the following workaround 1-I have another 2509 which has a defective ASYNC Socket , I removed all the Memories and stuff and put it in the other one and still get the same results. Your help would be highly appreciated. Thank you very much in advance, ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] LAN QoS on HWIC-4ESW
You will have to either trust the dscp marking done by the switch or you will have to mark them again. Please post your router configs and may be we can get a bit more detailed Hth Sent from my Windows Phone -- From: Alex Mendoza Sent: 8/26/2013 10:54 PM To: CCIE Study Subject: [OSL | CCIE_Voice] LAN QoS on HWIC-4ESW Hi All, I'm wondering about QoS on remote site. I just applied auto-qos between HQ and remote site, everything looks fine. When I run this command on both routers, in remote site I can't see packets. HQ Class-map: AutoQoS-VoIP-RTP-Trust (match-any) 11139 packets, 704260 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: ip dscp ef (46) 11139 packets, 704260 bytes 5 minute rate 0 bps Priority: 47 kbps, burst bytes 1500, b/w exceed drops: 0 REMOTE Class-map: AutoQoS-VoIP-RTP-Trust (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: ip dscp ef (46) 0 packets, 0 bytes 5 minute rate 0 bps Priority: 47 kbps, burst bytes 1500, b/w exceed drops: 0 For remote site I don't use HWIC-4ESW (expensive) instead am using ports from 3560 (same as HQ), after I put the commands: SW(config)#interface FastEthernet0/17 SW(config-if)#shut SW(config-if)# mls qos trust device cisco-phone SW(config-if)# mls qos trust cos SW(config-if)#no shut I started to see packets on policy-map. Class-map: AutoQoS-VoIP-RTP-Trust (match-any) 186 packets, 11904 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: ip dscp ef (46) 186 packets, 11904 bytes 5 minute rate 0 bps Priority: 47 kbps, burst bytes 1500, b/w exceed drops: 0 How I'll mark the packets on remote site to hit the policy-map in the FR link? Thanks in advanced Mendoza ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Fwd: LAN QoS Basics
Hi, I have been trying to do some QoS lab and seems that I am missing some basics here: ! class-map match-any Voice-Sig match ip dscp cs3 match ip dscp af31 class-map match-any Voice-RTP match ip dscp ef ! ! policy-map Voice-QoS class Voice-Sig set dscp cs3 class Voice-RTP set dscp ef ! interface FastEthernet1/0/1 switchport access vlan 12 switchport voice vlan 11 mls qos trust device cisco-phone mls qos trust dscp spanning-tree portfast ! interface FastEthernet1/0/2 switchport access vlan 12 switchport voice vlan 11 spanning-tree portfast However the moment I put the command "service policy input Voice-QoS" I get err messages as following: Switch(config)# Switch(config)# Switch(config)#int fa 1/0/1 Switch(config-if)#ser Switch(config-if)#service-policy in Switch(config-if)#service-policy input Voice-QoS Switch(config-if)# Aug 18 18:01:20.952: %QOSMGR-4-CLASS_NOT_SUPPORTED: Classification is not supported in classmap Voice-Sig Aug 18 18:01:20.952: %QOSMGR-4-CLASS_NOT_SUPPORTED: Classification is not supported in classmap Voice-Sig Aug 18 18:01:20.952: %QOSMGR-4-CLASS_NOT_SUPPORTED: Classification is not supported in classmap Voice-Sig Aug 18 18:01:20.952: %QOSMGR-4-CLASS_NOT_SUPPORTED: Classification is not supported in classmap Voice-Sig Aug 18 18:01:20.952: %QOSMGR-4-CLASS_NOT_SUPPORTED: Classification is not supported in classmap Voice-Sig Aug 18 18:01:20.952: %QOSMGR-4-CLASS_NOT_SUPPORTED: Classification is not supported in classmap Voice-Sig Aug 18 18:01:20.952: %QOSMGR-4-CLASS_NOT_SUPPORTED: Classification is not supported in classmap Voice-Sig Aug 18 18:01:20.952: %QOSMGR-4-CLASS_NOT_SUPPORTED: Classification is not supported in classmap Voice-Sig Aug 18 18:01:20.952: %QOSMGR-4-CLASS_NOT_SUPPORTED: Classification is not supported in classmap Voice-Sig Aug 18 18:01:20.952: %QOSMGR-4-CLASS_NOT_SUPPORTED: Classification is not supported in classmap Voice-Sig Aug 18 18:01:20.952: %QOSMGR-4-CLASS_NOT_SUPPORTED: Classification is not supported in classmap Voice-Sig Aug 18 18:01:20.952: %QOSMGR-4-CLASS_NOT_SUPPORTED: Classification is not supported in classmap Voice-Sig Aug 18 18:01:20.952: %QOSMGR-4-CLASS_NOT_SUPPORTED: Classification is not supported in classmap Voice-Sig Aug 18 18:01:20.952: %QOSMGR-4-CLASS_NOT_SUPPORTED: Classification is not supported in classmap Voice-Sig Please advise, Regards ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Fwd: LAN QoS Basics
Hi I think your suggestion solved it, I will test it more thoroughly and will keep you posted. Thank you very much Regards S Wilson Sent from my Windows Phone -- From: Somphol Boonjing Sent: 8/29/2013 3:03 AM To: Sam Wilson Cc: OSL Subject: Re: [OSL | CCIE_Voice] Fwd: LAN QoS Basics Hi Sam, I think I came across similar error message. You may want to adjust your Voice-Sig class-map as following: ! class-map match-any Voice-Sig match ip dscp cs3 af31 <=== list them in the same line class-map match-any Voice-RTP match ip dscp ef ! On Thu, Aug 29, 2013 at 4:47 PM, Sam Wilson wrote: > ! > class-map match-any Voice-Sig > match ip dscp cs3 > match ip dscp af31 > class-map match-any Voice-RTP > match ip dscp ef > ! > --Somphol. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] ccie voice for UC specialization
Hi Karen Per the Master UC Specialization webpage, I believe it's already a requirement. HTTP://cisco.com/go/Masteruc Regards Sent from my Windows Phone -- From: Karen Johnson Sent: 12/1/2013 5:48 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] ccie voice for UC specialization folks does anyone know when cisco start to require ccie voice as partner Master UC specialization ? K ___ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc