Re: [OSL | CCIE_Voice] cannot conference on CME
Ad-hoc supports up to 8 participants max, meetme supports up to 32 participants max (if all are G711). When doing meetme, you can configure multiple ephone-dn¹s with the same number to scale the number of connections you need. Depending on your IOS / CME version, you may have to do this with dual-lines instead of octo-lines (see the 1st link below). Before CME 8, you really can¹t create a meetme conference that is always available someone has to initiate the meetme using a softkey on an IP phone. In CME 8, you can create an ³unlocked meetme², but it is ³always available² without any password. There is no meetme password checking in CME. I¹ve seen a solution where someone created a UCCX script to have the call come into UCCX and then be transferred to the unlocked meetme if the user inputs the password that the script expects. You should check out: http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guid e/cmeconf.html For the password protection, google ³CME always on meetme UCCX² HTH, DQ On 6/5/12 12:27 PM, "Krishna" wrote: > Dan, > > you're right we need a dn that needs for conferencing. without this dn, it > didnt work. now my concern is: does this conference can only merge 8 active > calls or is it capable of taking more calls,since it is a otcal dn??? > > And, also can you advice how to set up a conference number on this router, so > that users can dial into this number and put the passcode for conference into > this router. > your help is much appreciated. > > Thank you. > > > > > > > From: Dan Quinlan (daquinla) > To: Krishna > Cc: ccie_voice@onlinestudylist.com > Sent: Monday, June 4, 2012 5:53 PM > Subject: Re: [OSL | CCIE_Voice] cannot conference on CME > > > You need an ephone-dn for conferencing - it does not need to be a dialable > number. Add something like: > > ephone-dn 10 octo > number a01 > Conference ad-hoc > > Also, under telephony-service do "conference hardware" > > DQ > d...@cisco.com > > Sent from my iPhone > > On Jun 4, 2012, at 3:52 PM, "Krishna" wrote: > >> Hi folks, >> >> i configured the transcoder and conference resources on the CME, but couldn't >> make them to work. When i want to conference the line, it says cannot >> complete the conference. >> >> here is my config: Did i miss any configuration part in this below config >> >> >> >> sccp local FastEthernet0/0 >> sccp ccm 10.50.5.1 identifier 1 version 7.0 >> sccp >> ! >> sccp ccm group 1 >> bind interface FastEthernet0/0 >> associate ccm 1 priority 1 >> associate profile 1 register Conference >> associate profile 2 register mtp(mac-address of sourceinterface) >> keepalive retries 5 >> switchover method immediate >> switchback method immediate >> switchback interval 5 >> ! >> dspfarm profile 2 transcode >> codec g711ulaw >> codec g711alaw >> codec g729ar8 >> codec g729abr8 >> codec g729r8 >> codec g729br8 >> maximum sessions 24 >> associate application SCCP >> ! >> dspfarm profile 1 conference >> codec g711ulaw >> codec g729r8 >> codec g729br8 >> codec g729abr8 >> codec g729ar8 >> maximum sessions 4 >> associate application SCCP >> >> here is the status of sccp: >> >> >> SCCP Admin State: UP >> Gateway Local Interface: FastEthernet0/0 >> IPv4 Address: 10.50.5.1 >> Port Number: 2000 >> IP Precedence: 5 >> User Masked Codec list: None >> Call Manager: 10.50.5.1, Port Number: 2000 >> Priority: N/A, Version: 7.0, Identifier: 1 >> Trustpoint: N/A >> >> Transcoding Oper State: ACTIVE - Cause Code: NONE >> Active Call Manager: 10.50.5.1, Port Number: 2000 >> TCP Link Status: CONNECTED, Profile Identifier: 2 >> Reported Max Streams: 48, Reported Max OOS Streams: 0 >> Supported Codec: g711ulaw, Maximum Packetization Period: 30 >> Supported Codec: g711alaw, Maximum Packetization Period: 30 >> Supported Codec: g729ar8, Maximum Packetization Period: 60 >> Supported Codec: g729abr8, Maximum Packetization Period: 60 >> Supported Codec: g729r8, Maximum Packetization Period: 60 >> Supported Codec: g729br8, Maximum Packetization Period: 60 >> Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 >> Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 >> Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization >> Period: 30 >> >> Conferencing Op
Re: [OSL | CCIE_Voice] cannot conference on CME
Dan, you're right we need a dn that needs for conferencing. without this dn, it didnt work. now my concern is: does this conference can only merge 8 active calls or is it capable of taking more calls,since it is a otcal dn??? And, also can you advice how to set up a conference number on this router, so that users can dial into this number and put the passcode for conference into this router. your help is much appreciated. Thank you. From: Dan Quinlan (daquinla) To: Krishna Cc: ccie_voice@onlinestudylist.com Sent: Monday, June 4, 2012 5:53 PM Subject: Re: [OSL | CCIE_Voice] cannot conference on CME You need an ephone-dn for conferencing - it does not need to be a dialable number. Add something like: ephone-dn 10 octo number a01 Conference ad-hoc Also, under telephony-service do "conference hardware" DQ d...@cisco.com Sent from my iPhone On Jun 4, 2012, at 3:52 PM, "Krishna" wrote: Hi folks, > > >i configured the transcoder and conference resources on the CME, but couldn't >make them to work. When i want to conference the line, it says cannot complete >the conference. > > >here is my config: Did i miss any configuration part in this below config > > > > > > >sccp local FastEthernet0/0 >sccp ccm 10.50.5.1 identifier 1 version 7.0 >sccp >! >sccp ccm group 1 > bind interface FastEthernet0/0 > associate ccm 1 priority 1 > associate profile 1 register Conference > associate profile 2 register mtp(mac-address of sourceinterface) > keepalive retries 5 > switchover method immediate > switchback method immediate > switchback interval 5 >! >dspfarm profile 2 transcode > codec g711ulaw > codec g711alaw > codec g729ar8 > codec g729abr8 > codec g729r8 > codec g729br8 > maximum sessions 24 > associate application SCCP >! >dspfarm profile 1 conference > codec g711ulaw > codec g729r8 > codec g729br8 > codec g729abr8 > codec g729ar8 > maximum sessions 4 > associate application SCCP > > >here is the status of sccp: > > > > >SCCP Admin State: UP >Gateway Local Interface: FastEthernet0/0 > IPv4 Address: 10.50.5.1 > Port Number: 2000 >IP Precedence: 5 >User Masked Codec list: None >Call Manager: 10.50.5.1, Port Number: 2000 > Priority: N/A, Version: 7.0, Identifier: 1 > Trustpoint: N/A > > >Transcoding Oper State: ACTIVE - Cause Code: NONE >Active Call Manager: 10.50.5.1, Port Number: 2000 >TCP Link Status: CONNECTED, Profile Identifier: 2 >Reported Max Streams: 48, Reported Max OOS Streams: 0 >Supported Codec: g711ulaw, Maximum Packetization Period: 30 >Supported Codec: g711alaw, Maximum Packetization Period: 30 >Supported Codec: g729ar8, Maximum Packetization Period: 60 >Supported Codec: g729abr8, Maximum Packetization Period: 60 >Supported Codec: g729r8, Maximum Packetization Period: 60 >Supported Codec: g729br8, Maximum Packetization Period: 60 >Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 >Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 >Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization >Period: 30 > > >Conferencing Oper State: ACTIVE - Cause Code: NONE >Active Call Manager: 10.50.5.1, Port Number: 2000 >TCP Link Status: CONNECTED, Profile Identifier: 1 >Reported Max Streams: 32, Reported Max OOS Streams: 0 >Supported Codec: g711ulaw, Maximum Packetization Period: 30 >Supported Codec: g729r8, Maximum Packetization Period: 60 >Supported Codec: g729br8, Maximum Packetization Period: 60 >Supported Codec: g729abr8, Maximum Packetization Period: 60 >Supported Codec: g729ar8, Maximum Packetization Period: 60 >Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 >Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 >Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization >Period: 30 ___ >For more information regarding industry leading CCIE Lab training, please >visit www.ipexpert.com > >Are you a CCNP or CCIE and looking for a job? Check out >www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Cannot Conference on CME
Greetings Krishna, What does you telephony service configuration look like. Below is a working example that I have built in my lab with CME registered to gatekeeper. 10.1.10.1 is the loopback address sccp local Loopback0 sccp ccm 10.1.10.1 identifier 1 priority 1 version 7.0 sccp ! sccp ccm group 1 associate ccm 1 priority 1 associate profile 2 register conference associate profile 1 register transcoder ! dspfarm profile 1 transcode codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 maximum sessions 4 associate application SCCP ! dspfarm profile 2 conference codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 6 conference-join custom-cptone join conference-leave custom-cptone leave associate application SCCP telephony-service sdspfarm units 6 sdspfarm transcode sessions 3 sdspfarm conference sessions 3 sdspfarm tag 1 transcoder sdspfarm tag 2 conference no privacy conference hardware no auto-reg-ephone xml user pvadmin password cisco 15 max-ephones 10 max-dn 20 no-reg ip source-address 10.1.10.1 port 2000 strict-match url authentication http:// 10.1.10.1 /CCMCIP/authenticate.asp pvphone cisco time-zone 42 time-format 24 voicemail 4220 max-conferences 8 gain -6 web admin system name admin password cisco transfer-system full-consult transfer-pattern .T create cnf-files version-stamp 7960 Jun 4 2012 02:36:34 Hope this helps, Best Regards --ms -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of ccie_voice-requ...@onlinestudylist.com Sent: Monday, June 04, 2012 3:24 PM To: ccie_voice@onlinestudylist.com Subject: CCIE_Voice Digest, Vol 76, Issue 7 Send CCIE_Voice mailing list submissions to ccie_voice@onlinestudylist.com To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/mailman/listinfo/ccie_voice or, via email, send a message with subject or body 'help' to ccie_voice-requ...@onlinestudylist.com You can reach the person managing the list at ccie_voice-ow...@onlinestudylist.com When replying, please edit your Subject line so it is more specific than "Re: Contents of CCIE_Voice digest..." Today's Topics: 1. Re: cannot conference on CME (Krishna) 2. Re: cannot conference on CME (Jeff Mchugh) 3. Re: cannot conference on CME (chase mergenthal) -- Message: 1 Date: Mon, 4 Jun 2012 12:02:20 -0700 (PDT) From: Krishna To: "ccie_voice@onlinestudylist.com" Subject: Re: [OSL | CCIE_Voice] cannot conference on CME Message-ID: <1338836540.25074.yahoomail...@web46008.mail.sp1.yahoo.com> Content-Type: text/plain; charset="iso-8859-1" Hi folks, i configured the transcoder and conference resources on the CME, but couldn't make them to work. When i want to conference the line, it says cannot complete the conference. here is my config: Did i miss any configuration part in this below config sccp local FastEthernet0/0 sccp ccm 10.50.5.1 identifier 1 version 7.0 sccp ! sccp ccm group 1 ?bind interface FastEthernet0/0 ?associate ccm 1 priority 1 ?associate profile 1 register Conference ?associate profile 2 register mtp(mac-address of sourceinterface) ?keepalive retries 5 ?switchover method immediate ?switchback method immediate ?switchback interval 5 ! dspfarm profile 2 transcode ?codec g711ulaw ?codec g711alaw ?codec g729ar8 ?codec g729abr8 ?codec g729r8 ?codec g729br8 ?maximum sessions 24 ?associate application SCCP ! dspfarm profile 1 conference ?codec g711ulaw ?codec g729r8 ?codec g729br8 ?codec g729abr8 ?codec g729ar8 ?maximum sessions 4 ?associate application SCCP here is the status of sccp: SCCP Admin State: UP Gateway Local Interface: FastEthernet0/0 ? ? ? ? IPv4 Address: 10.50.5.1 ? ? ? ? Port Number: 2000 IP Precedence: 5 User Masked Codec list: None Call Manager: 10.50.5.1, Port Number: 2000 ? ? ? ? ? ? ? ? Priority: N/A, Version: 7.0, Identifier: 1 ? ? ? ? ? ? ? ? Trustpoint: N/A Transcoding Oper State: ACTIVE - Cause Code: NONE Active Call Manager: 10.50.5.1, Port Number: 2000 TCP Link Status: CONNECTED, Profile Identifier: 2 Reported Max Streams: 48, Reported Max OOS Streams: 0 Supported Codec: g711ulaw, Maximum Packetization Period: 30 Supported Codec: g711alaw, Maximum Packetization Period: 30 Supported Codec: g729ar8, Maximum Packetization Period: 60 Supported Codec: g729abr8, Maximum Packetization Period: 60 Supported Codec: g729r8, Maximum Packetization Period: 60 Supported Codec: g729br8, Maximum Packetization Period: 60 Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30 Conferencing Oper State: ACTIVE - Cause
Re: [OSL | CCIE_Voice] cannot conference on CME
You need an ephone-dn for conferencing - it does not need to be a dialable number. Add something like: ephone-dn 10 octo number a01 Conference ad-hoc Also, under telephony-service do "conference hardware" DQ d...@cisco.com Sent from my iPhone On Jun 4, 2012, at 3:52 PM, "Krishna" wrote: > Hi folks, > > i configured the transcoder and conference resources on the CME, but couldn't > make them to work. When i want to conference the line, it says cannot > complete the conference. > > here is my config: Did i miss any configuration part in this below config > > > > sccp local FastEthernet0/0 > sccp ccm 10.50.5.1 identifier 1 version 7.0 > sccp > ! > sccp ccm group 1 > bind interface FastEthernet0/0 > associate ccm 1 priority 1 > associate profile 1 register Conference > associate profile 2 register mtp(mac-address of sourceinterface) > keepalive retries 5 > switchover method immediate > switchback method immediate > switchback interval 5 > ! > dspfarm profile 2 transcode > codec g711ulaw > codec g711alaw > codec g729ar8 > codec g729abr8 > codec g729r8 > codec g729br8 > maximum sessions 24 > associate application SCCP > ! > dspfarm profile 1 conference > codec g711ulaw > codec g729r8 > codec g729br8 > codec g729abr8 > codec g729ar8 > maximum sessions 4 > associate application SCCP > > here is the status of sccp: > > > SCCP Admin State: UP > Gateway Local Interface: FastEthernet0/0 > IPv4 Address: 10.50.5.1 > Port Number: 2000 > IP Precedence: 5 > User Masked Codec list: None > Call Manager: 10.50.5.1, Port Number: 2000 > Priority: N/A, Version: 7.0, Identifier: 1 > Trustpoint: N/A > > Transcoding Oper State: ACTIVE - Cause Code: NONE > Active Call Manager: 10.50.5.1, Port Number: 2000 > TCP Link Status: CONNECTED, Profile Identifier: 2 > Reported Max Streams: 48, Reported Max OOS Streams: 0 > Supported Codec: g711ulaw, Maximum Packetization Period: 30 > Supported Codec: g711alaw, Maximum Packetization Period: 30 > Supported Codec: g729ar8, Maximum Packetization Period: 60 > Supported Codec: g729abr8, Maximum Packetization Period: 60 > Supported Codec: g729r8, Maximum Packetization Period: 60 > Supported Codec: g729br8, Maximum Packetization Period: 60 > Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 > Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 > Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization > Period: 30 > > Conferencing Oper State: ACTIVE - Cause Code: NONE > Active Call Manager: 10.50.5.1, Port Number: 2000 > TCP Link Status: CONNECTED, Profile Identifier: 1 > Reported Max Streams: 32, Reported Max OOS Streams: 0 > Supported Codec: g711ulaw, Maximum Packetization Period: 30 > Supported Codec: g729r8, Maximum Packetization Period: 60 > Supported Codec: g729br8, Maximum Packetization Period: 60 > Supported Codec: g729abr8, Maximum Packetization Period: 60 > Supported Codec: g729ar8, Maximum Packetization Period: 60 > Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 > Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 > Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization > Period: 30 > ___ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] cannot conference on CME
Can you send a copy of the CME config? Also, are the DN's Octo lines? -Chase -- If winners never quit and quitters never win, then who coined the phrase, "Quit while you’re still ahead."? From: jeff.mch...@att.net Date: Mon, 4 Jun 2012 15:55:52 -0400 To: vinayak_...@yahoo.com CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] cannot conference on CME Try adding g711alaw under conferencing Sent from my iPhone On Jun 4, 2012, at 3:02 PM, Krishna wrote: Hi folks, i configured the transcoder and conference resources on the CME, but couldn't make them to work. When i want to conference the line, it says cannot complete the conference. here is my config: Did i miss any configuration part in this below config sccp local FastEthernet0/0sccp ccm 10.50.5.1 identifier 1 version 7.0sccp!sccp ccm group 1 bind interface FastEthernet0/0 associate ccm 1 priority 1 associate profile 1 register Conference associate profile 2 register mtp(mac-address of sourceinterface) keepalive retries 5 switchover method immediate switchback method immediate switchback interval 5!dspfarm profile 2 transcode codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 24 associate application SCCP!dspfarm profile 1 conference codec g711ulaw codec g729r8 codec g729br8 codec g729abr8 codec g729ar8 maximum sessions 4 associate application SCCP here is the status of sccp: SCCP Admin State: UPGateway Local Interface: FastEthernet0/0IPv4 Address: 10.50.5.1Port Number: 2000IP Precedence: 5User Masked Codec list: NoneCall Manager: 10.50.5.1, Port Number: 2000Priority: N/A, Version: 7.0, Identifier: 1 Trustpoint: N/A Transcoding Oper State: ACTIVE - Cause Code: NONEActive Call Manager: 10.50.5.1, Port Number: 2000TCP Link Status: CONNECTED, Profile Identifier: 2Reported Max Streams: 48, Reported Max OOS Streams: 0Supported Codec: g711ulaw, Maximum Packetization Period: 30Supported Codec: g711alaw, Maximum Packetization Period: 30Supported Codec: g729ar8, Maximum Packetization Period: 60Supported Codec: g729abr8, Maximum Packetization Period: 60Supported Codec: g729r8, Maximum Packetization Period: 60Supported Codec: g729br8, Maximum Packetization Period: 60Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30 Conferencing Oper State: ACTIVE - Cause Code: NONEActive Call Manager: 10.50.5.1, Port Number: 2000TCP Link Status: CONNECTED, Profile Identifier: 1Reported Max Streams: 32, Reported Max OOS Streams: 0Supported Codec: g711ulaw, Maximum Packetization Period: 30Supported Codec: g729r8, Maximum Packetization Period: 60Supported Codec: g729br8, Maximum Packetization Period: 60Supported Codec: g729abr8, Maximum Packetization Period: 60Supported Codec: g729ar8, Maximum Packetization Period: 60Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] cannot conference on CME
Try adding g711alaw under conferencing Sent from my iPhone On Jun 4, 2012, at 3:02 PM, Krishna wrote: > Hi folks, > > i configured the transcoder and conference resources on the CME, but couldn't > make them to work. When i want to conference the line, it says cannot > complete the conference. > > here is my config: Did i miss any configuration part in this below config > > > > sccp local FastEthernet0/0 > sccp ccm 10.50.5.1 identifier 1 version 7.0 > sccp > ! > sccp ccm group 1 > bind interface FastEthernet0/0 > associate ccm 1 priority 1 > associate profile 1 register Conference > associate profile 2 register mtp(mac-address of sourceinterface) > keepalive retries 5 > switchover method immediate > switchback method immediate > switchback interval 5 > ! > dspfarm profile 2 transcode > codec g711ulaw > codec g711alaw > codec g729ar8 > codec g729abr8 > codec g729r8 > codec g729br8 > maximum sessions 24 > associate application SCCP > ! > dspfarm profile 1 conference > codec g711ulaw > codec g729r8 > codec g729br8 > codec g729abr8 > codec g729ar8 > maximum sessions 4 > associate application SCCP > > here is the status of sccp: > > > SCCP Admin State: UP > Gateway Local Interface: FastEthernet0/0 > IPv4 Address: 10.50.5.1 > Port Number: 2000 > IP Precedence: 5 > User Masked Codec list: None > Call Manager: 10.50.5.1, Port Number: 2000 > Priority: N/A, Version: 7.0, Identifier: 1 > Trustpoint: N/A > > Transcoding Oper State: ACTIVE - Cause Code: NONE > Active Call Manager: 10.50.5.1, Port Number: 2000 > TCP Link Status: CONNECTED, Profile Identifier: 2 > Reported Max Streams: 48, Reported Max OOS Streams: 0 > Supported Codec: g711ulaw, Maximum Packetization Period: 30 > Supported Codec: g711alaw, Maximum Packetization Period: 30 > Supported Codec: g729ar8, Maximum Packetization Period: 60 > Supported Codec: g729abr8, Maximum Packetization Period: 60 > Supported Codec: g729r8, Maximum Packetization Period: 60 > Supported Codec: g729br8, Maximum Packetization Period: 60 > Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 > Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 > Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization > Period: 30 > > Conferencing Oper State: ACTIVE - Cause Code: NONE > Active Call Manager: 10.50.5.1, Port Number: 2000 > TCP Link Status: CONNECTED, Profile Identifier: 1 > Reported Max Streams: 32, Reported Max OOS Streams: 0 > Supported Codec: g711ulaw, Maximum Packetization Period: 30 > Supported Codec: g729r8, Maximum Packetization Period: 60 > Supported Codec: g729br8, Maximum Packetization Period: 60 > Supported Codec: g729abr8, Maximum Packetization Period: 60 > Supported Codec: g729ar8, Maximum Packetization Period: 60 > Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 > Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 > Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization > Period: 30 > ___ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] cannot conference on CME
Hi folks, i configured the transcoder and conference resources on the CME, but couldn't make them to work. When i want to conference the line, it says cannot complete the conference. here is my config: Did i miss any configuration part in this below config sccp local FastEthernet0/0 sccp ccm 10.50.5.1 identifier 1 version 7.0 sccp ! sccp ccm group 1 bind interface FastEthernet0/0 associate ccm 1 priority 1 associate profile 1 register Conference associate profile 2 register mtp(mac-address of sourceinterface) keepalive retries 5 switchover method immediate switchback method immediate switchback interval 5 ! dspfarm profile 2 transcode codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 24 associate application SCCP ! dspfarm profile 1 conference codec g711ulaw codec g729r8 codec g729br8 codec g729abr8 codec g729ar8 maximum sessions 4 associate application SCCP here is the status of sccp: SCCP Admin State: UP Gateway Local Interface: FastEthernet0/0 IPv4 Address: 10.50.5.1 Port Number: 2000 IP Precedence: 5 User Masked Codec list: None Call Manager: 10.50.5.1, Port Number: 2000 Priority: N/A, Version: 7.0, Identifier: 1 Trustpoint: N/A Transcoding Oper State: ACTIVE - Cause Code: NONE Active Call Manager: 10.50.5.1, Port Number: 2000 TCP Link Status: CONNECTED, Profile Identifier: 2 Reported Max Streams: 48, Reported Max OOS Streams: 0 Supported Codec: g711ulaw, Maximum Packetization Period: 30 Supported Codec: g711alaw, Maximum Packetization Period: 30 Supported Codec: g729ar8, Maximum Packetization Period: 60 Supported Codec: g729abr8, Maximum Packetization Period: 60 Supported Codec: g729r8, Maximum Packetization Period: 60 Supported Codec: g729br8, Maximum Packetization Period: 60 Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30 Conferencing Oper State: ACTIVE - Cause Code: NONE Active Call Manager: 10.50.5.1, Port Number: 2000 TCP Link Status: CONNECTED, Profile Identifier: 1 Reported Max Streams: 32, Reported Max OOS Streams: 0 Supported Codec: g711ulaw, Maximum Packetization Period: 30 Supported Codec: g729r8, Maximum Packetization Period: 60 Supported Codec: g729br8, Maximum Packetization Period: 60 Supported Codec: g729abr8, Maximum Packetization Period: 60 Supported Codec: g729ar8, Maximum Packetization Period: 60 Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com