RE: studio errors
Hello All, I do not have MM Dreamweaver installed on my 2000 (development server using studio) and also get the 'saved but not saved' and the GPF errors. Since Allaire charges per incident and this is obviously a programming error on their part (nothing under my control), I have not pursued the issue. /LEMAN/ [EMAIL PROTECTED] -Original Message- From: Shane Witbeck [mailto:[EMAIL PROTECTED]] Sent: Sunday, June 04, 2000 7:39 AM To: [EMAIL PROTECTED] Subject: RE: studio errors I have these also and they only seem to happen if I have Dreamweaver open at the same time? I never did research to resolve the problem, instead I just closed and restarted each program (DW and CF Studio). Sincerely, Shane Witbeck Webmaster [EMAIL PROTECTED] www.digitalsanctum.com -Original Message- From: paul smith [mailto:[EMAIL PROTECTED]] Sent: Sunday, June 04, 2000 9:16 AM To: [EMAIL PROTECTED] Subject: Re: studio errors These happen to me, too. But only occasionally. The good news is that 4.5.1 doesn't appear to be zeroing out templates. In addition, I get a phony "Someone else has modified the file" (or some such) when I'm the only one here doing it. It's annoying to worrying as to if Studio is going to explode and wipe my hard drive or something;-) Don't know the fixes. best, paul At 06:34 AM 6/4/00 -0500, you wrote: I'm running Studio 4.5.1, and seeing lots of exception errors. I reboot my machine, start Studio, and then quit, and I get: Application Error: Exception EAccessViolation in module cfstudio45.exe at address 004F9614 in module 'cfstudio45.exe'. Read of address 01ADC064. This happens repeatedly when I quit. It did not happen when I first installed 4.5, but it seems suddenly frequent, and I'm not sure what changed. Also, occasionally when I save a file, the file is saved, but the file tab still shows the file as unsaved, and I occasionally also get exception errors while editing. Any ideas what would cause this? Should I reinstall? Originally I was running 4.0, then I installed a 4.5 upgrade, and finally I installed the 4.5.1 upgrade. If I reinstall, do I need to follow these steps again, or is the 4.5.1 upgrade a complete version? Gregory M. Saunders, Ph.D. Senior Design Architect Cognitive Arts Corporation (http://www.cognitivearts.com) 1840 Oak Avenue, 4th Floor Evanston, IL 60201-5914 --- --- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
RE: studio errors
This is still an issue on my 500MB Ram machine... wow need another 500 I guess. /LEMAN/ [EMAIL PROTECTED] -Original Message- From: Sean Renet [mailto:[EMAIL PROTECTED]] Sent: Sunday, June 04, 2000 12:16 PM To: [EMAIL PROTECTED] Subject: Re: studio errors I have found this to be the case when I have other applications open. I think it is because studio is a ram hog (hehe part of allaire's new dna testing on animals) and when you attempt to close it there is not enough "room" to close it properly. You will be happy to know that this doesn't happen on my gig'o'ram machine. - Original Message - From: "Ben Densmore" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, June 04, 2000 11:35 AM Subject: Re: studio errors I run inot the same problem all the time, alot of times I end up just using CF Studio 4.0.1 it seems to be alot more stable than 4.5.1, I haven't tried reinstalling mine yet. i'm not positive but I think 4.5.1 might just be an upgrade Ben - Original Message - From: William J Wheatley [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, June 04, 2001 2:27 PM Subject: Re: studio errors yes i get the same crap with mine and its only when i have DW3 open =0) so hopefully they'll come out with a fix cause its an annoying problem - Original Message - From: "paul smith" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, June 04, 2000 9:16 AM Subject: Re: studio errors These happen to me, too. But only occasionally. The good news is that 4.5.1 doesn't appear to be zeroing out templates. In addition, I get a phony "Someone else has modified the file" (or some such) when I'm the only one here doing it. It's annoying to worrying as to if Studio is going to explode and wipe my hard drive or something;-) Don't know the fixes. best, paul At 06:34 AM 6/4/00 -0500, you wrote: I'm running Studio 4.5.1, and seeing lots of exception errors. I reboot my machine, start Studio, and then quit, and I get: Application Error: Exception EAccessViolation in module cfstudio45.exe at address 004F9614 in module 'cfstudio45.exe'. Read of address 01ADC064. This happens repeatedly when I quit. It did not happen when I first installed 4.5, but it seems suddenly frequent, and I'm not sure what changed. Also, occasionally when I save a file, the file is saved, but the file tab still shows the file as unsaved, and I occasionally also get exception errors while editing. Any ideas what would cause this? Should I reinstall? Originally I was running 4.0, then I installed a 4.5 upgrade, and finally I installed the 4.5.1 upgrade. If I reinstall, do I need to follow these steps again, or is the 4.5.1 upgrade a complete version? Gregory M. Saunders, Ph.D. Senior Design Architect Cognitive Arts Corporation (http://www.cognitivearts.com) 1840 Oak Avenue, 4th Floor Evanston, IL 60201-5914 --- --- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit
RE: Am I Missing Something?
Here is an example of what I did to deal with this, perhaps it will help. (Please, everyone, let me know if this is not a good idea) I have two application.cfm files. One in a directory called 'login' and another in my 'main' directory. A session.LoggedIn variable gets set by one of the files in the 'login' directory. The application.cfm file in the 'main' directory checks for this session variable and then throws the client back to the 'login' page (in the login directory) if the session variable is not set. Hope this helps? /LEMAN/ [EMAIL PROTECTED] -Details below- Application.cfm file excerpts from both the 'login' and 'main' directories. Login directory application.cfm has the following code: =-=-=-=-=-=-=-=-=-=- !---Test for login --- CFIF session.LoggedIn EQ "false" !--- clear session variables --- !--- If the user is logged out, purge all array variables so they won't have information left over from last sesison. --- cfoutput cfset temp = #ArrayClear(session.arClients)# cfset temp = #ArrayClear(session.arDrives)# cfset temp = #ArrayClear(session.arMapper)# cfset temp = #ArrayClear(session.arIBM)# cfset temp = #ArrayClear(session.arAS400)# cfset temp = #ArrayClear(session.arPPS)# cfset session.Comments = "NONE" cfset session.MachineType = "NONE" cfset session.LotusNotes = "NONE" cfset session.Comments = "" /cfoutput !--- DO NOT throw them to the login page because this application.cfm Is used during the login process. CFLOCATION URL="../login/Login.cfm" --- /CFIF =-=-=-=-=-=- application.cfm in the 'main' directory: =-=-=-=-=-= !---Test for login --- CFIF session.LoggedIn EQ "false" !--- clear session variables --- !--- If the user is logged out, purge all array variables so they won't have information left over from last sesison. --- cfoutput cfset temp = #ArrayClear(session.arClients)# cfset temp = #ArrayClear(session.arDrives)# cfset temp = #ArrayClear(session.arMapper)# cfset temp = #ArrayClear(session.arIBM)# cfset temp = #ArrayClear(session.arAS400)# cfset temp = #ArrayClear(session.arPPS)# cfset session.Comments = "NONE" cfset session.MachineType = "NONE" cfset session.LotusNotes = "NONE" cfset session.Comments = "" /cfoutput !--- throw them to the login page since they are not logged in --- CFLOCATION URL="../login/Login.cfm" /CFIF =-=-=-=-=- -Original Message- From: Kelly Matthews [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 13, 2000 6:27 PM To: '[EMAIL PROTECTED] ' Subject: Am I Missing Something? Ok I am somewhat new to CF but something doesn't seem to be right. I have a section of our site that is secure, for members only. I have written the app to write a cookie so they don't have to login in the future. That part works fine. Now I just wanted to see what happened if someone had cookies turned off, and of course even you can log in but the minute you try to go to a 2nd page it loops back to the log in. Now before I implemented the cookies I did have session management on set to about 30 minutes, which is still on, so people wouldnt have to relog in, that worked fine. But with cookies off session management stops working too. Does session management work only with cookies? I tried something else, turned client management on, and used a database for clientstorage, instead of the registry or cookies, just to test it out, but that didn't keep them logged in either. I must be missing something but isnt there a way to open and maintain a session without cookies? I changed setclientcookies to "no" but as long as my browser cookies are off I still can't get in. Point is they get logged in and get to the first page after the login page but if they try to go anywhere else they get kicked back to the login page, which from the app.cfm below leads me to beleive its not setting Session.Loggedin, and the only difference is that I turned my browser cookies off. Guess I just want to find out if Session.Loggedin HAS to be set in a cookie or somewhere can i define it to be set a different way. The client variables were however writing to the datasource with no problem. Any help would be appreciated. Below is my Application.cfm I have tried all 3 client storage methods. and with setclientcookies on and off. cfapplication name="Members" CLIENTSTORAGE="Clients" clientmanagement="Yes" sessionmanagement="Yes" setclientcookies="NO" sessiontimeout="#CreateTimeSpan(0,0,30,0)#"
RE: CF Developer in Cambridge, MA
No Remote, no deal. -Original Message- From: Brian Peddle [mailto:[EMAIL PROTECTED]] Sent: Monday, May 01, 2000 11:08 AM To: [EMAIL PROTECTED] Subject: CF Developer in Cambridge, MA CampusCareerCenter.com is the world's largest campus job fair. Our exciting new company is ready to explode, and we are looking for enthusiastic, experienced developers to help make it happen. Some of our benefits include medical, 401 (k), and pre-IPO stock options. We are seeking an experienced Coldfusion Developer to assist us in the Design, develop, implementation, and support of web projects using HTML, JavaScript and Cold Fusion. Our ideal Candidate should posses a strong knowledge of Coldfusion (2+ years experience), SQL, JavaScript, and a STRONG commitment to excellence. Candidate must be flexible (ability to change tasks and scope of responsibilities quickly), as well as adaptable (eager to learn new skills to expand and broaden job position). For immediate consideration, send your current resume, salary history and requirements via e-mail to: [EMAIL PROTECTED] No Contract, No Remote - Full Time On-Site only. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
RE: Setting Up ODBC Datasources Thru CF Administrator
Hi Chris, I had this happen also. Although the browse did not function, I was able to type in the file location by hand and it worked. Hope this helps, /LEMAN/ -Original Message- From: Chris Montgomery [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 27, 2000 8:25 AM To: [EMAIL PROTECTED] Subject: Setting Up ODBC Datasources Thru CF Administrator Howdy, Once upon a time, I could set up ODBC datasources through CF Administrator. Recently, after adding a datasource name and clicking on the browse button to go select the database file to complete the installation, no directories ever come up in the window that is supposed to show the directory tree. The hourglass icon just runs and runs. I've made sure the RDS service is running before attempting this but no joy. To work around this, I'm having to use the ODBC Data Source Administrator under Win98's Control Panel to set up datasources. Could this possibly be an MDAC thang? Any suggestions on what to check? My setup: running Studio 4.5.1 on Win98 (1st ed.), MS Access97 databases Chris Montgomery = astutia.com - http://www.astutia.com [EMAIL PROTECTED] Astute e-business applications web site development 210-490-3249/888-745-7603 Fax 210-490-4692 Allaire Consulting Partner/Authorized NetObjects Reseller Find a Job in San Antonio - http://www.sajobnet.com Need professional help? - http://www.psychadvisor.com = -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
RE: cfloop query
Hi Shannon, Does the problem occur when there is no image returned for a record, i.e., the record is empty? You may try putting in a non-breaking space in the place of an empty record. I am not sure I have enough information to troubleshoot your problem... Perhaps send me your code and a picture of the output. Thanks, /LEMAN/ [EMAIL PROTECTED] -Original Message- From: Shannon Carr [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 27, 2000 12:05 PM To: [EMAIL PROTECTED] Subject: cfloop query This is a multi-part message in MIME format. --=_NextPart_000_0062_01BFB059.F5CAF4C0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I am trying to generate a cfloop query that will query a table and ouput = the results in a table 4 columns wide. The data are thumbnail photos. = The problem I am having is getting items to populate 1 row then move to = the next row until the table is complete. Any help would be appreciated. Thanks, S. Carr --=_NextPart_000_0062_01BFB059.F5CAF4C0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable !DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" HTMLHEAD META content=3D"text/html; charset=3Diso-8859-1" = http-equiv=3DContent-Type META content=3D"MSHTML 5.00.2920.0" name=3DGENERATOR STYLE/STYLE /HEAD BODY bgColor=3D#ff DIVFONT size=3D2 DIVFONT size=3D2 DIVFONT size=3D2I am trying to generate a cfloop query that will = querynbsp;a=20 table and ouput the results in a table 4 columns wide.nbsp; The = datanbsp;are=20 thumbnail photos. The problem I am having is getting items to populate 1 = row=20 then move to the next row until the table is complete./FONT/DIV DIVnbsp;/DIV DIVFONT size=3D2Any help would be appreciated./FONT/DIV DIVnbsp;/DIV DIVFONT size=3D2Thanks,/FONT/DIV DIVFONT size=3D2S. = Carr/FONT/DIV/FONT/DIV/FONT/DIV/BODY/HTML --=_NextPart_000_0062_01BFB059.F5CAF4C0-- -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
RE: Add single quotes to each element on a list
Hi Wey, !---Using brute forceYou can do a:--- cfoutput cfset selState = "'AL,AK,AS,AZ,AR,CA,CO,CT,DC,DE,FL,GA'" original selState: #selState#brbr cfset newStateList = #REReplace(selState, ",", "','", "ALL")# selState with more commas: #newStateList#brbr /cfoutput Make sure to modify this in case a single selection needs a different action taken than a multiple selection. Hope this helps, /LEMAN/ [EMAIL PROTECTED] -Original Message- From: Wey Hueymeei [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 27, 2000 3:57 PM To: [EMAIL PROTECTED] Subject: Add single quotes to each element on a list Hello, I have a multiple selection list of states in the US cfselect display="rstate_name" multiple="yes" size="5" required="yes" message="Please select a state!" value="rstate_code" query="selByState" name="selState" /cfselect When the user selects several out of the list and submit, the selected state Code are passed as selState = 'AL,AK,AS,AZ,AR,CA,CO,CT,DC,DE,FL,GA' I wonder if there is a way to make the list like selState = 'AL','AK','AS','AZ','AR','CA','CO','CT','DC','DE','FL','GA' because on the next page i am writing some SQL like this SELECT * FROM ORIA_STAKEHOLDER WHERE RSTATE_CODE IN (#selState#) I should have single quotes on each of the elements so I could get correct result. Any input is appreciated, HTH Sylvia -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
RE: Making a unique ID
I ran into this too, I wrote a 'random' number generator for our 4.01 server, but it isn't truly random and was pretty bruteforce-ish. I also tried a UUID tag that someone wrote, but it failed when I stressed the server (I did not pursue whether it was a problem with the tag, or a timeout issue with the server.) I am planning to use the UUID tag (in sever 4.5 or greater) after we upgrade. What does everyone think?? Is the 4.5 Server UUID function 'Random' enough for a unique database ID? Thanks, /LEMAN/ -Original Message- From: Owens, Howard [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 27, 2000 4:49 PM To: '[EMAIL PROTECTED]' Subject: Making a unique ID As we know, you can use Access to generate either an incremental or a random ID number. We've also had discussions about using CF expressions to do this. What if you don't want to use either of these methods? My assumption is that CFTokens and CFIDs are always unique. I was thinking of splicing these numbers together as inserting them into the DB as the ID. My question is, is my assumption correct? Will these numbers always be unique, especially when taken together? I can get away with this because I'm taking the draconian approach to require all users of this particular application to enable cookies, so I know ALL users will have these numbers set in their cookies when they get to this point in the application. I just want to make sure I won't bump into any duplicate issues, or that the chance of a duplicate is so remote (in the 1 to billions range) that it really won't be an issue. H. = Howard Owens Web Producer InsideVC.com mailto:[EMAIL PROTECTED] = -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
RE: Context for cfparam
Hi Dana, I use the context of the variable as part of the 'name' in cfparam. I.E. cfparam name="session.FirstName" default = "bob" Try it and see if it works for you. /LEMAN/ -Original Message- From: Dana Larose [mailto:[EMAIL PROTECTED]] Sent: Wednesday, April 26, 2000 2:19 PM To: [EMAIL PROTECTED] Subject: Context for cfparam Hmm...I couldn't find this in any of the manuals, so I decided to ask you guys: If I have a form variable, I can call it Form.blah, if it is a Session variable, I can name it Session.blah. But what is the context for variables set with cfparam or cfset? I.e. if I have cfparam name="blah" default="" how do I do X.blah? Thanks! Dana -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
RE: intermedia hosting $$ for SQL server
I am considering this service www.interland.com. The 2nd level account has a monthly fee *including* SQL server for $49.95 -Original Message- From: Tom Rainey [mailto:[EMAIL PROTECTED]] Sent: Wednesday, April 19, 2000 4:58 PM To: [EMAIL PROTECTED] Subject: intermedia hosting $$ for SQL server I checked out Intermedia Cold Fusion hosting. Doesn't $50/month extra for SQL server seem a little much? -Tom -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Custom tag destroys session variables?
Hello! I'm not sure what is going on here, does this make sense to anyone? Problem: =-=-=-=- Custom tag seems to destroy session variables within the same page. Details: =-=-=-=- (my custom tag simply gathers information and sends an email, all CF stuff, nothing fancy) I can see and test session variable in the page before the custom tag is called. Later in the same page, after I call the custom tag, my session variables are no more. :( I understand the session variables scope does not allow me to see them in the custom tag itself, but having them 'go away' after calling a custom tag, this does not make sense to me. Help? /LEMAN/ [EMAIL PROTECTED] "Most folks are about as happy as they make up their minds to be." -Abraham Lincoln -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
RE: Custom tag destroys session variables?
Hmmm. Thanks. I'll check it out! -Original Message- From: Steve Reich [mailto:[EMAIL PROTECTED]] Sent: Friday, April 14, 2000 10:25 AM To: [EMAIL PROTECTED] Subject: RE: Custom tag destroys session variables? Here is one possible problem You can only set 20 (I think is the limit) cookies per domain. When you try to set the 21st cookie, it drops one off...and so on. I ran into this problem once and it took forever to figure out, but make sure you aren't surpassing that limit. Session variables count as cookies in this equation. I used to have detailed information on this but can't seem to find it at the moment. HTH, Steve -Original Message- From: Reagan, Leman [mailto:[EMAIL PROTECTED]] Sent: Friday, April 14, 2000 11:37 AM To: [EMAIL PROTECTED] Subject: Custom tag destroys session variables? Hello! I'm not sure what is going on here, does this make sense to anyone? Problem: =-=-=-=- Custom tag seems to destroy session variables within the same page. Details: =-=-=-=- (my custom tag simply gathers information and sends an email, all CF stuff, nothing fancy) I can see and test session variable in the page before the custom tag is called. Later in the same page, after I call the custom tag, my session variables are no more. :( I understand the session variables scope does not allow me to see them in the custom tag itself, but having them 'go away' after calling a custom tag, this does not make sense to me. Help? /LEMAN/ [EMAIL PROTECTED] "Most folks are about as happy as they make up their minds to be." -Abraham Lincoln -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
