Re: [Chevelle-List] Buying a bumper at Spring Carlisle
Replies to this message are sent to The Chevelle Mailing List I guess I've looked at about all the bumper options. I bought new REPRO front and rear bumpers for my '66 convert, and will probably do the same when the hardtop comes together. I bought both at car shows / swap meets. With something this visible, I wanted to be able to eyeball them before ordering sight unseen from some place far away. I am happy with each. The chrome plating is nice and even, and they fit good. I have been told there are at least two different manufacturers of repro bumpers for our cars, and that one is pretty chinsy, and the other pretty good. My advice is to make arrangements for one to be brought to a show, and look it over. Jim ACES # 2020 2 - '66 SS's Replies to this message are sent to The Chevelle Mailing List I thought that I remember this list talking about bumpers before. If I remember correctly, the discussion was that the bumper by Ashley, OPG,Etc. were good looking units but the metal was thinner than stock. Some replies to the discussion were to rechrome your old bumper even if the cost was more. If Bumper Boyz are true factory replacement with the same metal thickness as a stock one,that price may not be too bad. The three items to look at when replacing a chrome bumper would be the chrome job(was it chrome correctly and will not chip,or start rusting under the chrome),the metal thickness and the mounting (If the mounting hole etc. are correct for your year car and the installation is not a problem like some replacement parts,i.e. inner fenders etc.) Keith - Original Message - From: Richard Milkiewicz [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, January 17, 2002 8:54 AM Subject: Re: [Chevelle-List] Buying a bumper at Spring Carlisle Replies to this message are sent to The Chevelle Mailing List Jim, I was at the Michigan State Fair grounds for a swap meet this past week-end and BUMPER BOYZ were there. Their quality looked very good. I haven't looked at other bumpers as I'm not in the market. I get my old ones repaired and replated. For the price of one bumper and another 50 to 75 dollars I can get both of mine done. A bumper for your '69 cost $240 exchange.(front or rear). $295 with no exchange. These are factory bumpers. Seems a little high for me. But again, they are excelent in quality. Check their web site.. www.bumperboyz.com Rich - Original Message - From: Jim R Hunter [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, January 16, 2002 9:21 PM Subject: [Chevelle-List] Buying a bumper at Spring Carlisle Replies to this message are sent to The Chevelle Mailing List I'm going to be looking for a new front bumper for my 69 at Spring Carlisle. Anyone know a list of vendors who sell bumpers who will be in attendance? (e.g. Year One, OPG, NPD, Paddock?). Do any of them allow you to order ahead of time by phone and then pick up the bumper there to cut shipping costs? (or is it all pretty much pot luck and/or 1st-come, 1st-served in terms of hoping one of the vendors still has a bumper for your car when you get to them?). Jim -69-SS396- H. GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno today! For your FREE software, visit: http://dl.www.juno.com/get/web/. - To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: chevelle- [EMAIL PROTECTED] - To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: chevelle- [EMAIL PROTECTED] - To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED] - To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
[Chevelle-List] Fwd: Chevy engine parts
This was sent to me by a friend. I'm not a small block guy so i don't know if the prices are good or what. just thought I'd pass it on and if someone did find something i could go look for them. larry ---BeginMessage--- ---BeginMessage--- Larry: Saw an ad at the credit union for car parts. 383 crank, main bearing, long rods, short rods. hi volume oil pump, timing chain freeze plug kit. $300.00 TRW .030 cast pistons, new in box $50.00 69' 350 crank, balancer, flexplate and clutch plate $150.00 69' 194 cylinder heads (non-smokers) $150.00 Guy by name of Steven 503-657-6535 will take $500.00 for everything. Call after 3pm. Don't know if you need any of this or not. just for your info. Dick ---End Message--- ---End Message---
[Chevelle-List] Check out 1970 396ss convertible w factory a/c
Click here: 1970 396ss convertible w factory a/c well since I'm broke right at the moment, i thought i would pass this on to the list. larry
Re: [Chevelle-List] 0, 30, 60 degree paint
I plan on using the eastwood spray cans myself, chassis black, under hood black, radiator black, and they have different grays. I expect they will be close enough to the correct degree of sheen. I have also heard that you can get a barbeque paint in a spray can at some hardware stores that has a sheen that looks pretty good. As far as the regular spray paint that is availible, flat will be too flat, and semi gloss will be too shiny for inner fenders and such.
Re: [Chevelle-List] Buying a bumper at Spring Carlisle
Now that I saw their web site, I can say I have heard bad reports about them. From what I have heard they are very sleazy business men and stay away from them. this was told to me by two different sources both in the chevelle parts business. Larry
RE: [Chevelle-List] corvette rear
Clint, how much do you think one of those would cost ?? Do you know how wide it is. André -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Clint HooperSent: 14. januar 2002 23:27To: [EMAIL PROTECTED]Subject: Re: [Chevelle-List] Texas + corvette rear If you are referring to the Dana 44 rear ends found in manual trans C4 Corvettes(85-96),the rear cover on the 44 has three bolts running across the top of the rear inspection cover. Dana 44 is also stamped on the housing. Clint HooperLT5 RegistryWichita Falls,Tx(940) 855-6636 anytime'90 ZR-1 Red/Red #952TX TAGS: USA ZR1http://www.LT5Registry.com/ - Original Message - From: Tigergutt can anybody tell me how to identify a corvette rear ? I mean the "big" ones from manual trannies from the "small" ones from automatics. Thanks André
RE: [Chevelle-List] 70 ss
Kelly, Check out, or if you're out of money after buying the house do not check out the 70 ssad Larry posted earlyer. André -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Kelly C. HannaSent: 15. januar 2002 01:49To: [EMAIL PROTECTED]Subject: RE: [Chevelle-List] Texas + corvette rearAt 02:51 PM 01/14/2002, you wrote: Kelly,forgot to ask you.how is everything going in the "new" house.Very well, thanks AndreWe love the house...it's perfect for us both. I guess there'll never be a car in the garage (my shop is in there and I'm getting busier every day). So if I ever get the 70 SS I want it'll have to go somewhere else. But the place is great, got a park out front and a "mountain" in the backyard. It doesn't get much better than this in the city Kelly C. Hannawww.hannawoodworks.com
Re: [Chevelle-List] Buying a bumper at Spring Carlisle
Replies to this message are sent to The Chevelle Mailing List Well I will have to say that I can not give da Boyz a kind recommendation. I have talked to a lot of people and very few have had good experiences with them. Things to watch out for with them: A) the bumpers on display may not alwas been the quality of work you get on yours B) they try raping people on their cores C) if you send a bumper to them you just may get it back D) their customer service has a lot to be desired(just ask my mom about them and she will just give you that look) E) I've heard a lot of complaints about the durability of the chrome and reluctance to warranty the work All I will say is buyer beware... After da Boyz pissed mom off we ended up getting our bumpers from Tri-City Plating out of Tenn. They are usually at Carlisle and I beleive that 71-72 bumpers were about 225 with exchange. The chrome is triple plated and buffed out real nice. They have a lifetime warranty on the plating and are genuinely nice guys. I sent their # and address to tom earlier.. hopefully he will post it later today. once i find the 800 number for them i will post it. YMMV JJ Fig - To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
RE: [Chevelle-List] 70 ss
At 12:47 PM 01/18/2002, you wrote: Kelly, Check out, or if you're out of money after buying the house do not check out the 70 ss ad Larry posted earlyer. I am broke, the other house hasn't sold yet, but I'm working at a pretty good sized project now.things will only get busier nowmy ad comes out next week. I will have to wait several years to get my next car though Kelly C. Hanna www.hannawoodworks.com
Re: [Chevelle-List] paint
That's a great idea... I never would have thought to do that :) I remember how hard it was picking a color from a book. The 1/2"x 1/2" "dark blue" that I knew I wanted in the color chart book all looked pretty much the same on paper. I kind of blindly picked... luckily I was happy with my choice :) Rodney. 71 Chevelle Phoenix, AZ - Original Message - From: Keith Cooper To: [EMAIL PROTECTED] Sent: Wednesday, January 16, 2002 5:36 PM Subject: Re: [Chevelle-List] paint I did not play follow-the-leader when I pick the color for my 71 Chevelle. One thing that I did that helped me pick the color for my car was to purchase the two colors I liked. I painted a fender, half with one color and half with the other. I noticed that one of the colors showed off the lines and curses better than the other. You should purchase a pint of some colors and try them. Picking a color is a big decision and a lot of work has to be done to make the car look good. Do not paint until you know for sure. Keith Cooper - Original Message - From: pablo To: [EMAIL PROTECTED] Sent: Wednesday, January 16, 2002 10:08 AM Subject: [Chevelle-List] paint I have a 1964 300 2 door; all original, that i am just starting to get into. It needs paint and that where I have chosen to begin. The original color was fawn, inside and out. I have not seen any chevelles repainted that color and it seems to me that it would be a waste of time because you really can't see the car with this color. So I am leaning towards going over to that chevelle blue that has always caught my eye. I could always see those blue chevelles coming. After a little investigating I am seeing that there are three colors in this tone of blue in 1964. A dark aqua (lagoon aqua), a medium aqua (aqua aqua) and a medium blue (silver blue). From what i can gather, I cannot determine which is the color that i want. Is there someone who has an opinion that might help me sort this out. When I see the paint on a car there is no mistake, even in some pictures. Is there a more popular blue for the chevelle ? pem
RE: [Chevelle-List] Muncie ?
I have delivered the trans to the welder, he said that the two ears were no problem (I really hope that), he was more concerned about the crack in the bellhousing, it will cost me about $ 40-60 in total. André -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of nick viscianiSent: 14. januar 2002 05:34To: [EMAIL PROTECTED]Subject: RE: [Chevelle-List] Muncie ? Ditto - one additional point - make sure who ever welds it,bolts the trans, along with the broken ear, to a stock bellhousing to locate that 4th Bolt hole correctly - npv -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED]Sent: Sunday, January 13, 2002 1:13 PMTo: [EMAIL PROTECTED]Subject: Re: [Chevelle-List] Muncie ?Andre, Its doable, welding aluminum is very tricky, i have an M-21 tranny that has one ear broken off that i have to have welded. Get a professional welder to do it. Tom
RE: [Chevelle-List] custom 383 air cleaner decals
Replies to this message are sent to The Chevelle Mailing List Sure - Is there a web link to see one? Nick -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED] Sent: Friday, January 18, 2002 12:24 AM To: [EMAIL PROTECTED] Subject: Re: [Chevelle-List] custom 383 air cleaner decals Replies to this message are sent to The Chevelle Mailing List Guys, I`m having some custom decals made for my air cleaner which will replicate the crossed flag 396 decal. My cost is approx. $10. Anyone else interested? bob Myers NC - To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED] - To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
Re: [Chevelle-List] Tremec 5 speed in66?
Thanks I appreciate but wont be doing any thing until summer when school lets out at the earliest. I will keep your e-mail on file though so I have your address when I do get ready. Please let me know if someone actully puts one in a 66. I also will be looking forward to the info on the 65. Thanks, Dan
Re: [Chevelle-List] corvette rear
I see them going for around $1,000 to $1,500. Width? I "think" they are approximately 60" but don't hold me to that number. If you're thinking about putting one under a Chevelle,,forget it. Too much money and trouble. Clint HooperLT5 RegistryWichita Falls,Tx(940) 855-6636 anytime'90 ZR-1 Red/Red #952TX TAGS: USA ZR1http://www.LT5Registry.com/ - Original Message - From: Tigergutt Clint, how much do you think one of those would cost ?? Do you know how wide it is. André -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Clint Hooper If you are referring to the Dana 44 rear ends found in manual trans C4 Corvettes(85-96),the rear cover on the 44 has three bolts running across the top of the rear inspection cover. Dana 44 is also stamped on the housing. Clint HooperLT5 RegistryWichita Falls,Tx(940) 855-6636 anytime'90 ZR-1 Red/Red #952TX TAGS: USA ZR1http://www.LT5Registry.com/ - Original Message - From: Tigergutt can anybody tell me how to identify a corvette rear ? I mean the "big" ones from manual trannies from the "small" ones from automatics. Thanks André
Re: [Chevelle-List] Z16 BBINTERCHANGE BOOK
Replies to this message are sent to The Chevelle Mailing List thankyou. On Fri, 18 Jan 2002 01:11:58 EST [EMAIL PROTECTED] writes: the book is called Powerpro Series Chevrolet Big-Block V-8 Interchange Manual by Tom Currao. Where I got it ??? Well, I think maybe at Baxter Auto Parts? Larry GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno today! For your FREE software, visit: http://dl.www.juno.com/get/web/. - To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
