Re: [Chevelle-list] Commited
Link to my floor pics: http://s629.photobucket.com/albums/uu13/rickas47/Floor%20Pan/ On Tue, Oct 6, 2009 at 6:52 PM, Rick Schaefer wrote: > DUH - I forgot the link. Half-timers disease kicking in again. I'm at > work & can't access photobucket tonite, but will post a link to the pics in > the AM. Sorry to get you all excited > > > On Tue, Oct 6, 2009 at 5:37 PM, Jim H. Thompson > wrote: > >> If you can leave the floor brace intact do so. You will need to drill >> the spot welds. Did you buy the replacement pan? It will help you determine >> how much room you have to cut. >> >> >> >> *From:* chevelle-list-boun...@chevelles.net [mailto: >> chevelle-list-boun...@chevelles.net] *On Behalf Of *Rick Schaefer >> *Sent:* Tuesday, October 06, 2009 10:20 AM >> *To:* The Chevelle Mailing List >> *Subject:* [Chevelle-list] Commited >> >> >> >> I commited to replacing portions of my drivers side floor pan. >> Passenger side is near perfect.I cut out the most significant damage ( >> at the intersection of the toe board & floor pan), I think rot started at >> the overlapping seam. But there is a bit more damage than that also.I >> posted pics of progress at photobucket and included my "plans" in the >> comments under the pics. I would apprecite your ideas & input on what I've >> done so far. I'll be asking detail questions (mostly welding stuff) >> as I progress. >> >> >> -- >> Rick Schaefer >> 72 TPI El Camino >> >> > > > -- > Rick Schaefer > 72 TPI El Camino > > > -- Rick Schaefer 72 TPI El Camino
Re: [Chevelle-list] Commited
DUH - I forgot the link. Half-timers disease kicking in again. I'm at work & can't access photobucket tonite, but will post a link to the pics in the AM. Sorry to get you all excited On Tue, Oct 6, 2009 at 5:37 PM, Jim H. Thompson wrote: > If you can leave the floor brace intact do so. You will need to drill the > spot welds. Did you buy the replacement pan? It will help you determine how > much room you have to cut. > > > > *From:* chevelle-list-boun...@chevelles.net [mailto: > chevelle-list-boun...@chevelles.net] *On Behalf Of *Rick Schaefer > *Sent:* Tuesday, October 06, 2009 10:20 AM > *To:* The Chevelle Mailing List > *Subject:* [Chevelle-list] Commited > > > > I commited to replacing portions of my drivers side floor pan. > Passenger side is near perfect.I cut out the most significant damage ( > at the intersection of the toe board & floor pan), I think rot started at > the overlapping seam. But there is a bit more damage than that also.I > posted pics of progress at photobucket and included my "plans" in the > comments under the pics. I would apprecite your ideas & input on what I've > done so far. I'll be asking detail questions (mostly welding stuff) > as I progress. > > > -- > Rick Schaefer > 72 TPI El Camino > > -- Rick Schaefer 72 TPI El Camino
Re: [Chevelle-list] Commited
If you can leave the floor brace intact do so. You will need to drill the spot welds. Did you buy the replacement pan? It will help you determine how much room you have to cut. From: chevelle-list-boun...@chevelles.net [mailto:chevelle-list-boun...@chevelles.net] On Behalf Of Rick Schaefer Sent: Tuesday, October 06, 2009 10:20 AM To: The Chevelle Mailing List Subject: [Chevelle-list] Commited I commited to replacing portions of my drivers side floor pan. Passenger side is near perfect.I cut out the most significant damage ( at the intersection of the toe board & floor pan), I think rot started at the overlapping seam. But there is a bit more damage than that also.I posted pics of progress at photobucket and included my "plans" in the comments under the pics. I would apprecite your ideas & input on what I've done so far. I'll be asking detail questions (mostly welding stuff) as I progress. -- Rick Schaefer 72 TPI El Camino
Re: [Chevelle-list] Engine / water pump dates
Thank you Dale, You confirmed my thinking and will continue looking for one at least a week or 2 earlier. -Krister - Original Message - From: "Dale" To: "The Chevelle Mailing List" Sent: Tuesday, October 6, 2009 11:58:08 AM GMT -06:00 US/Canada Central Subject: Re: [Chevelle-list] Engine / water pump dates Water pumps were installed before the engine was shipped but after the build date was stamped. Conceivable? Yes. Probable? No. Dale From: chevelle-list-boun...@chevelles.net [mailto:chevelle-list-boun...@chevelles.net] On Behalf Of 66chevelless...@comcast.net Sent: Tuesday, October 06, 2009 11:54 AM To: The Chevelle Mailing List Subject: [Chevelle-list] Engine / water pump dates OK I know the rule of thumb that engine components could be dated up to 3 months prior to engine build date. I am looking for a date correct water pump. My stamped engine assembly date is 5/18. I've located a water pump dated 5/19/66. Were the water pumps put on at the time of engine assembly or a later date? Conceivable that a 5/18 assembled engine could have a 5/19 water pump on it? Thanks, -Krister
Re: [Chevelle-list] Engine / water pump dates
Water pumps were installed before the engine was shipped but after the build date was stamped. Conceivable? Yes. Probable? No. Dale _ From: chevelle-list-boun...@chevelles.net [mailto:chevelle-list-boun...@chevelles.net] On Behalf Of 66chevelless...@comcast.net Sent: Tuesday, October 06, 2009 11:54 AM To: The Chevelle Mailing List Subject: [Chevelle-list] Engine / water pump dates OK I know the rule of thumb that engine components could be dated up to 3 months prior to engine build date. I am looking for a date correct water pump. My stamped engine assembly date is 5/18. I've located a water pump dated 5/19/66. Were the water pumps put on at the time of engine assembly or a later date? Conceivable that a 5/18 assembled engine could have a 5/19 water pump on it? Thanks, -Krister
[Chevelle-list] Engine / water pump dates
OK I know the rule of thumb that engine components could be dated up to 3 months prior to engine build date. I am looking for a date correct water pump. My stamped engine assembly date is 5/18. I've located a water pump dated 5/19/66. Were the water pumps put on at the time of engine assembly or a later date? Conceivable that a 5/18 assembled engine could have a 5/19 water pump on it? Thanks, -Krister
Re: [Chevelle-list] Is there anybody out there?
Rich, Just send message that you want to be taken off the list, but don't know how. That will get things going :) -Krister OH BOY. Dan
Re: [Chevelle-list] Commited
Can you post a link to the pics? Dan On Tue, Oct 6, 2009 at 10:19 AM, Rick Schaefer wrote: > I commited to replacing portions of my drivers side floor pan. > Passenger side is near perfect.I cut out the most significant damage ( > at the intersection of the toe board & floor pan), I think rot started at > the overlapping seam. But there is a bit more damage than that also.I > posted pics of progress at photobucket and included my "plans" in the > comments under the pics. I would apprecite your ideas & input on what I've > done so far. I'll be asking detail questions (mostly welding stuff) > as I progress. > > -- > Rick Schaefer > 72 TPI El Camino > > >
[Chevelle-list] Commited
I commited to replacing portions of my drivers side floor pan. Passenger side is near perfect.I cut out the most significant damage ( at the intersection of the toe board & floor pan), I think rot started at the overlapping seam. But there is a bit more damage than that also.I posted pics of progress at photobucket and included my "plans" in the comments under the pics. I would apprecite your ideas & input on what I've done so far. I'll be asking detail questions (mostly welding stuff) as I progress. -- Rick Schaefer 72 TPI El Camino
Re: [Chevelle-list] Is there anybody out there?
Rich, Just send message that you want to be taken off the list, but don't know how. That will get things going :) -Krister - Original Message - From: "Rich Pruett" To: "The Chevelle Mailing List" Sent: Tuesday, October 6, 2009 7:58:35 AM GMT -06:00 US/Canada Central Subject: [Chevelle-list] Is there anybody out there? If the women don't find you handsome, they should at least find you handy. Red Green
Re: [Chevelle-list] Is there anybody out there?
Great coverage of CB 09 in Super Chevy this month. Did you see it? Anybody building a car for the autocross next year? Alex LaRue LaRue Insurance, Inc. (800)303-3518 P O Box 119 Fax (270)358-8978 54 Lincoln Square Hodgenville, KY 42748ACES 4711 -Original Message- From: chevelle-list-boun...@chevelles.net [mailto:chevelle-list-boun...@chevelles.net] On Behalf Of Rich Pruett Sent: Tuesday, October 06, 2009 8:59 AM To: The Chevelle Mailing List Subject: [Chevelle-list] Is there anybody out there? If the women don't find you handsome, they should at least find you handy. Red Green
Re: [Chevelle-list] Is there anybody out there?
We Are Water Logging In South Dakota LOL. Kevin... Father To Holly,Lisa,Jacob,Shianna,Tyler Grandpa To Many LOL --- On Tue, 10/6/09, Dan Rachlin wrote: From: Dan Rachlin Subject: Re: [Chevelle-list] Is there anybody out there? To: "The Chevelle Mailing List" Date: Tuesday, October 6, 2009, 8:07 AM I am here. Dan On Tue, Oct 6, 2009 at 8:58 AM, Rich Pruett wrote: If the women don't find you handsome, they should at least find you handy. Red Green
Re: [Chevelle-list] Is there anybody out there?
I am here. Dan On Tue, Oct 6, 2009 at 8:58 AM, Rich Pruett wrote: > > > If the women don't find you handsome, they should at least find you handy. > > Red Green >
[Chevelle-list] Is there anybody out there?
If the women don't find you handsome, they should at least find you handy. Red Green
