Re: [Chevelle-List] sway bar front

[jfg69]

Replies to this message are sent to The Chevelle Mailing List


I had a similar problem with a belt tensioner, turned out a bunch of change got jammed 
up in it. Might be 
worth a look-see...


jerry




8/28/01 9:30:43 PM, [EMAIL PROTECTED] wrote:




   Hi Guys, 
   I bought a Hellwig front sway bar [1 1/8  for my 65 el cmino to 
   compliment the global west front end pieces. I notice that the spacing 

   between the two mounting bolt holes is much greater on the aftermarket
   sway 
   bar. Am I supposed to drill one hole on each side to install? 
   Also, for the same car I have a pair of leather buckets out of a 2000 

   impala along with the shoulder belts. I can`t get the belt to release on
   the 
   tensioner. Is it possible that the inertia device locks permantly once the

   car is in a wreck? Any help appreciated. thanx bob Myers NC




-
To Unsubscribe please visit www.chevelles.net/list.html
To start a new topic, send mail to: [EMAIL PROTECTED]

Re: [Chevelle-List] sway bar front

[Kent Lewis]

Also, for the same car I have a pair of leather buckets out of 
a 2000 impala along with the shoulder belts. I can`t get the belt to release 
on the tensioner. Is it possible that the inertia device locks permanently 
once the car is in a wreck? Any help appreciated. thanx bob Myers NC 


Bob,

 Had a similar problem when I removed the 
shoulder belt from my work truck. Could not get the belt to release on the 
tensioner. Then I realized that I needed to turn the tensioner upside 
down, to duplicate the position it was mounted in the truck. Then it 
worked !! Just an idea. 

Kent
'68 Malibu ZZ502/502 
:)

Re: [Chevelle-List] sway bar front

[Rjmmyers]

Hi Guys,
 I bought a Hellwig front sway bar [1 1/8 " for my 65 el cmino to 
compliment the global west front end pieces. I notice that the spacing 
between the two mounting bolt holes is much greater on the aftermarket sway 
bar. Am I supposed to drill one hole on each side to install?
 Also, for the same car I have a pair of leather buckets out of a 2000 
impala along with the shoulder belts. I can`t get the belt to release on the 
tensioner. Is it possible that the inertia device locks permantly once the 
car is in a wreck? Any help appreciated. thanx bob Myers NC