Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought
Herb i agree, "Music to my ears!" thanks for the videos Bill Bradley http://autos.groups.yahoo.com/group/chevellerestoration/ 67 Chevelle Malibu 305/700R4 http://www.cardomain.com/ride/1649723 71 Triumph Spitfire http://www.cardomain.com/ride/2506950 82 Kawasaki KZ305CSR Herb Lumpp <[EMAIL PROTECTED]> wrote: It's not a photo but in this video clip you can see how I routed the tail pipes on my 66 Chevelle... http://s263.photobucket.com/albums/ii131/hlumpp/Chevelle/454/?action=view&cu rrent=MOV09471.flv The tail pipes are from Pypes but they didn't line up with the rest of the system (non-Pypes) so I had to cut and realign them and then weld them back together. Herb -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bill Bradley Sent: Thursday, February 21, 2008 10:26 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought I'd like to see that myself, i have the same dilemma. my exhaust ends at the output of my flowmaster 40's. Bill Bradley http://autos.groups.yahoo.com/group/chevellerestoration/ 67 Chevelle Malibu 305/700R4 http://www.cardomain.com/ride/1649723 71 Triumph Spitfire http://www.cardomain.com/ride/2506950 82 Kawasaki KZ305CSR Michou Olivera <[EMAIL PROTECTED]> wrote: Hey all, I'm in the middle of trying to figure out how I want my exhaust to exit on my 67 Chevelle and was wondering if anyone out there in Chevelle land has any photos to share of how they routed theirs. Thanks in advance! Cheers, Michou -- --
Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought
Oh no, I'm pretty sure that its completley shot. It looks like your kunooder valve took a turn for the worse, ruining the engine. I'll take it off your hands. :o) Just kidding with yah Herb! On a side note: My car goes into paint today. I'm getting off here in a few to take it in. -Original Message- From: Herb Lumpp <[EMAIL PROTECTED]> To: 'The Chevelle Mailing List' Sent: Sat, 23 Feb 2008 4:21 am Subject: Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought Yeah it does look pretty bad, but fortunately it's mostly condensation (when I shut it down there?were two?puddles of water directly below the tips).? The temperature?was around 30 degrees?when I made that video. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Saturday, February 23, 2008 12:23 AM To: chevelle-list@chevelles.net Subject: Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought In that video Herb, your engine seems to be smoking an excess amount. Better pull it out and send it to me for inspection.? :o) -Original Message- From: Herb Lumpp <[EMAIL PROTECTED]> To: 'The Chevelle Mailing List' Sent: Fri, 22 Feb 2008 6:34 pm Subject: Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought Thanks. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rich Pruett Sent: Friday, February 22, 2008 7:46 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought Very nice. ? -- Original message -- From: "Herb Lumpp" <[EMAIL PROTECTED]> > It's not a photo but in this video clip you can see how I routed the tail > pipes on my 66 Chevelle... > > > http://s263.photobucket.com/albums/ii131/hlumpp/Chevelle/454/?action=view&cu > rrent=MOV09471.flv > > The tail pipes are from Pypes but they didn't line up with the rest of the > system (non-Pypes) so I had to cut and realign them and then weld them back > together. > > Herb > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Bill Bradley > Sent: Thursday, February 21, 2008 10:26 PM > To: The Chevelle Mailing List > Subject: Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought > > I'd like to see that myself, i have the same dilemma. my exhaust ends at the > output of my flowmaster 40's. > > Bill Bradley > http://autos.groups.yahoo.com/group/chevellerestoration/ > 67 Chevelle Malibu 305/700R4 > http://www.cardomain.com/ride/1649723 > 71 Triumph Spitfire > http://www.cardomain.com/ride/2506950 > 82 Kawasaki KZ305CSR > > Michou Olivera wrote: > Hey all, > > I'm in the middle of trying to figure out how I want my exhaust to exit on > my 67 Chevelle and was wondering if anyone out there in Chevelle land has > any photos to share of how they routed theirs. Thanks in advance! > > Cheers, > > Michou > > -- > > > More new features than ever. Check out the new AOL Mail! More new features than ever. Check out the new AOL Mail ! - http://webmail.aol.com
Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought
Yeah it does look pretty bad, but fortunately it's mostly condensation (when I shut it down there were two puddles of water directly below the tips). The temperature was around 30 degrees when I made that video. _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Saturday, February 23, 2008 12:23 AM To: chevelle-list@chevelles.net Subject: Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought In that video Herb, your engine seems to be smoking an excess amount. Better pull it out and send it to me for inspection. :o) -Original Message- From: Herb Lumpp <[EMAIL PROTECTED]> To: 'The Chevelle Mailing List' Sent: Fri, 22 Feb 2008 6:34 pm Subject: Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought Thanks. _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> ] On Behalf Of Rich Pruett Sent: Friday, February 22, 2008 7:46 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought Very nice. -- Original message -- From: "Herb Lumpp" <[EMAIL PROTECTED]> > It's not a photo but in this video clip you can see how I routed the tail > pipes on my 66 Chevelle... > > > http://s263.photobucket.com/albums/ii131/hlumpp/Chevelle/454/?action=view <http://s263.photobucket.com/albums/ii131/hlumpp/Chevelle/454/?action=view&c u> &cu > rrent=MOV09471.flv > > The tail pipes are from Pypes but they didn't line up with the rest of the > system (non-Pypes) so I had to cut and realign them and then weld them back > together. > > Herb > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> ] On Behalf Of Bill Bradley > Sent: Thursday, February 21, 2008 10:26 PM > To: The Chevelle Mailing List > Subject: Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought > > I'd like to see that myself, i have the same dilemma. my exhaust ends at the > output of my flowmaster 40's. > > Bill Bradley > http://autos.groups.yahoo.com/group/chevellerestoration/ > 67 Chevelle Malibu 305/700R4 > http://www.cardomain.com/ride/1649723 > 71 Triumph Spitfire > http://www.cardomain.com/ride/2506950 > 82 Kawasaki KZ305CSR > > Michou Olivera wrote: > Hey all, > > I'm in the middle of trying to figure out how I want my exhaust to exit on > my 67 Chevelle and was wondering if anyone out there in Chevelle land has > any photos to share of how they routed theirs. Thanks in advance! > > Cheers, > > Michou > > -- > > > _ More new features than ever. Check out the new AOL Mail <http://o.aolcdn.com/cdn.webmail.aol.com/mailtour/aol/en-us/text.htm?ncid=ao lcmp000503> !
Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought
In that video Herb, your engine seems to be smoking an excess amount. Better pull it out and send it to me for inspection.? :o) -Original Message- From: Herb Lumpp <[EMAIL PROTECTED]> To: 'The Chevelle Mailing List' Sent: Fri, 22 Feb 2008 6:34 pm Subject: Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought Thanks. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rich Pruett Sent: Friday, February 22, 2008 7:46 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought Very nice. ? -- Original message -- From: "Herb Lumpp" <[EMAIL PROTECTED]> > It's not a photo but in this video clip you can see how I routed the tail > pipes on my 66 Chevelle... > > > http://s263.photobucket.com/albums/ii131/hlumpp/Chevelle/454/?action=view&cu > rrent=MOV09471.flv > > The tail pipes are from Pypes but they didn't line up with the rest of the > system (non-Pypes) so I had to cut and realign them and then weld them back > together. > > Herb > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Bill Bradley > Sent: Thursday, February 21, 2008 10:26 PM > To: The Chevelle Mailing List > Subject: Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought > > I'd like to see that myself, i have the same dilemma. my exhaust ends at the > output of my flowmaster 40's. > > Bill Bradley > http://autos.groups.yahoo.com/group/chevellerestoration/ > 67 Chevelle Malibu 305/700R4 > http://www.cardomain.com/ride/1649723 > 71 Triumph Spitfire > http://www.cardomain.com/ride/2506950 > 82 Kawasaki KZ305CSR > > Michou Olivera wrote: > Hey all, > > I'm in the middle of trying to figure out how I want my exhaust to exit on > my 67 Chevelle and was wondering if anyone out there in Chevelle land has > any photos to share of how they routed theirs. Thanks in advance! > > Cheers, > > Michou > > -- > > > More new features than ever. Check out the new AOL Mail ! - http://webmail.aol.com
Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought
Thanks. _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rich Pruett Sent: Friday, February 22, 2008 7:46 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought Very nice. -- Original message -- From: "Herb Lumpp" <[EMAIL PROTECTED]> > It's not a photo but in this video clip you can see how I routed the tail > pipes on my 66 Chevelle... > > > http://s263.photobucket.com/albums/ii131/hlumpp/Chevelle/454/?action=view&cu > rrent=MOV09471.flv > > The tail pipes are from Pypes but they didn't line up with the rest of the > system (non-Pypes) so I had to cut and realign them and then weld them back > together. > > Herb > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Bill Bradley > Sent: Thursday, February 21, 2008 10:26 PM > To: The Chevelle Mailing List > Subject: Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought > > I'd like to see that myself, i have the same dilemma. my exhaust ends at the > output of my flowmaster 40's. > > Bill Bradley > http://autos.groups.yahoo.com/group/chevellerestoration/ > 67 Chevelle Malibu 305/700R4 > http://www.cardomain.com/ride/1649723 > 71 Triumph Spitfire > http://www.cardomain.com/ride/2506950 > 82 Kawasaki KZ305CSR > > Michou Olivera wrote: > Hey all, > > I'm in the middle of trying to figure out how I want my exhaust to exit on > my 67 Chevelle and was wondering if anyone out there in Chevelle land has > any photos to share of how they routed theirs. Thanks in advance! > > Cheers, > > Michou > > -- > > >
Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought
Thats how I had mine done on the 66 but they were turned down slightly, I always liked this look better than straight out the back. Brad Waller <[EMAIL PROTECTED]> wrote: I don't have routing pictures, but the shop just bent the pipes to go over the axle and exit just behind the rear wheels. You can see the pipe in this whole car picture: http://epage.com/brad/Chevelle/ as well as some of the pictures on the page for the new V45 wheels. Brad Waller ([EMAIL PROTECTED]) '66 Corvette | 327/dead | 4-speed | Wilwood Brakes | 245/45/16 BFG R1 '67 Chevelle | ex-SS396 | 355/700R4 | F-Body Brakes | 275/40/17 Kumho MX - From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michou Olivera Sent: Thursday, February 21, 2008 4:41 PM To: chevelle-list@chevelles.net Subject: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought Hey all, I'm in the middle of trying to figure out how I want my exhaust to exit on my 67 Chevelle and was wondering if anyone out there in Chevelle land has any photos to share of how they routed theirs. Thanks in advance! Cheers, Michou - Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.
Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought
Very nice. -- Original message -- From: "Herb Lumpp" <[EMAIL PROTECTED]> > It's not a photo but in this video clip you can see how I routed the tail > pipes on my 66 Chevelle... > > > http://s263.photobucket.com/albums/ii131/hlumpp/Chevelle/454/?action=view&cu > rrent=MOV09471.flv > > The tail pipes are from Pypes but they didn't line up with the rest of the > system (non-Pypes) so I had to cut and realign them and then weld them back > together. > > Herb > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Bill Bradley > Sent: Thursday, February 21, 2008 10:26 PM > To: The Chevelle Mailing List > Subject: Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought > > I'd like to see that myself, i have the same dilemma. my exhaust ends at the > output of my flowmaster 40's. > > Bill Bradley > http://autos.groups.yahoo.com/group/chevellerestoration/ > 67 Chevelle Malibu 305/700R4 > http://www.cardomain.com/ride/1649723 > 71 Triumph Spitfire > http://www.cardomain.com/ride/2506950 > 82 Kawasaki KZ305CSR > > Michou Olivera wrote: > Hey all, > > I'm in the middle of trying to figure out how I want my exhaust to exit on > my 67 Chevelle and was wondering if anyone out there in Chevelle land has > any photos to share of how they routed theirs. Thanks in advance! > > Cheers, > > Michou > > -- > > >
Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought
Brad, Thanks for the info! I wish I had time to run down there and talk to them. My car is stripped of paint, all replacement sheetmetal is on, exterior is stripped of any moldings, the entire interior is stripped. They just have to finish a little welding, do some body work, and paint. I'll do all the reassembly. Looks like I'm taking it over to a place in Pomona, tomorrow morning. I actually just put new wheels on mine, and they are pretty similar to yours. I bought American Racing CL205's. But mine are 18/20's. I have 4.5" backspacing in the rear, and 4" in the front...I was just curious how much yours were to kind of compare. Minus the balljoint area, looks like they fit pretty good! Maybe a tad snug, but no big deal. Thanks again! -Tim -Original Message- From: Brad Waller <[EMAIL PROTECTED]> To: 'The Chevelle Mailing List' Sent: Fri, 22 Feb 2008 3:42 pm Subject: Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought Tim, ? The paint job was very good.? I did a bunch of prep by removing bumpers, trim, and some other stuff.? I also bought all the replacement body panels (rust and previous accident damage).? They did not re-assemble the trim other than the window chrome. ? So, for stripping, primer, sanding, and final paint ran about $5K maybe ten years ago.? They laid down a really thick coat of custom color paint and did a great job of body prep (no waves) and paint finishing (very smooth).? I might have the color mix somewhere, but I basically told them I wanted the Chevelle to make the foreman's yellow '72 Camaro to look dull.? They experimented and came up with a few possibilities, and this is the final result. ? The wheels are from?Vintage Wheel Works (http://vintagewheelworks.com/) and are the V45 wheels with 5 7/8" backspace.? You might be better with a 5 3/4" backspace as there is minimal clearance between the upper A-Arm ball joint socket on the Global West arms and the rim.? There is a ton of room to the outside on the rear, and I did have to pound the wheelwell (trunk) a bit to make sure the tire did not rub at max compression.? You can see some of this in the pictures here: http://epage.com/brad/Chevelle/v45/v45.html Brad Waller ([EMAIL PROTECTED]) '66 Corvette | 327/dead | 4-speed | Wilwood Brakes | 245/45/16 BFG R1 '67 Chevelle | ex-SS396 | 355/700R4 | F-Body Brakes | 275/40/17 Kumho MX From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Friday, February 22, 2008 9:41 AM To: chevelle-list@chevelles.net Subject: Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought Hey Brad, ? Love your Chevelle. I like that yellow paint...I have a few questions for yah if you dont mind. Number one, how well did they paint your car? Are you happy with it? About how much to get it painted? I'm taking mine tomorrow to get painted, but I'm still looking for paint shops hahaha. Your new wheels...they are all 17x9.5's? What about tires sizes and backspacing??? Thanks for your help!!! -Tim -Original Message- From: Brad Waller <[EMAIL PROTECTED]> To: 'The Chevelle Mailing List' Sent: Fri, 22 Feb 2008 8:55 am Subject: Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought I don't have routing pictures, but the shop just bent the pipes to go over the axle and exit just behind the rear wheels.?You can see the pipe in this whole car picture: http://epage.com/brad/Chevelle/?as well as some of the pictures on the page for the new V45 wheels. Brad Waller ([EMAIL PROTECTED]) '66 Corvette | 327/dead | 4-speed | Wilwood Brakes | 245/45/16 BFG R1 '67 Chevelle | ex-SS396 | 355/700R4 | F-Body Brakes | 275/40/17 Kumho MX From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michou Olivera Sent: Thursday, February 21, 2008 4:41 PM To: chevelle-list@chevelles.net Subject: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought Hey all, ? I'm in the middle of trying to figure out how I want my exhaust to exit on my 67 Chevelle and was wondering if anyone out there in Chevelle land has any photos to share of how they routed theirs. Thanks in advance! ? Cheers, ? Michou ? More new features than ever. Check out the new AOL Mail ! - http://webmail.aol.com
Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought
Tim, The paint job was very good. I did a bunch of prep by removing bumpers, trim, and some other stuff. I also bought all the replacement body panels (rust and previous accident damage). They did not re-assemble the trim other than the window chrome. So, for stripping, primer, sanding, and final paint ran about $5K maybe ten years ago. They laid down a really thick coat of custom color paint and did a great job of body prep (no waves) and paint finishing (very smooth). I might have the color mix somewhere, but I basically told them I wanted the Chevelle to make the foreman's yellow '72 Camaro to look dull. They experimented and came up with a few possibilities, and this is the final result. The wheels are from Vintage Wheel Works (http://vintagewheelworks.com/) and are the V45 wheels with 5 7/8" backspace. You might be better with a 5 3/4" backspace as there is minimal clearance between the upper A-Arm ball joint socket on the Global West arms and the rim. There is a ton of room to the outside on the rear, and I did have to pound the wheelwell (trunk) a bit to make sure the tire did not rub at max compression. You can see some of this in the pictures here: http://epage.com/brad/Chevelle/v45/v45.html Brad Waller ([EMAIL PROTECTED]) '66 Corvette | 327/dead | 4-speed | Wilwood Brakes | 245/45/16 BFG R1 '67 Chevelle | ex-SS396 | 355/700R4 | F-Body Brakes | 275/40/17 Kumho MX _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Friday, February 22, 2008 9:41 AM To: chevelle-list@chevelles.net Subject: Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought Hey Brad, Love your Chevelle. I like that yellow paint...I have a few questions for yah if you dont mind. Number one, how well did they paint your car? Are you happy with it? About how much to get it painted? I'm taking mine tomorrow to get painted, but I'm still looking for paint shops hahaha. Your new wheels...they are all 17x9.5's? What about tires sizes and backspacing??? Thanks for your help!!! -Tim -Original Message- From: Brad Waller <[EMAIL PROTECTED]> To: 'The Chevelle Mailing List' Sent: Fri, 22 Feb 2008 8:55 am Subject: Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought I don't have routing pictures, but the shop just bent the pipes to go over the axle and exit just behind the rear wheels. You can see the pipe in this whole car picture: http://epage.com/brad/Chevelle/ as well as some of the pictures on the page for the new V45 wheels. Brad Waller ([EMAIL PROTECTED]) '66 Corvette | 327/dead | 4-speed | Wilwood Brakes | 245/45/16 BFG R1 '67 Chevelle | ex-SS396 | 355/700R4 | F-Body Brakes | 275/40/17 Kumho MX _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> ] On Behalf Of Michou Olivera Sent: Thursday, February 21, 2008 4:41 PM To: chevelle-list@chevelles.net Subject: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought Hey all, I'm in the middle of trying to figure out how I want my exhaust to exit on my 67 Chevelle and was wondering if anyone out there in Chevelle land has any photos to share of how they routed theirs. Thanks in advance! Cheers, Michou
Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought
Hey Brad, Love your Chevelle. I like that yellow paint...I have a few questions for yah if you dont mind. Number one, how well did they paint your car? Are you happy with it? About how much to get it painted? I'm taking mine tomorrow to get painted, but I'm still looking for paint shops hahaha. Your new wheels...they are all 17x9.5's? What about tires sizes and backspacing??? Thanks for your help!!! -Tim -Original Message- From: Brad Waller <[EMAIL PROTECTED]> To: 'The Chevelle Mailing List' Sent: Fri, 22 Feb 2008 8:55 am Subject: Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought I don't have routing pictures, but the shop just bent the pipes to go over the axle and exit just behind the rear wheels.?You can see the pipe in this whole car picture: http://epage.com/brad/Chevelle/?as well as some of the pictures on the page for the new V45 wheels. Brad Waller ([EMAIL PROTECTED]) '66 Corvette | 327/dead | 4-speed | Wilwood Brakes | 245/45/16 BFG R1 '67 Chevelle | ex-SS396 | 355/700R4 | F-Body Brakes | 275/40/17 Kumho MX From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michou Olivera Sent: Thursday, February 21, 2008 4:41 PM To: chevelle-list@chevelles.net Subject: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought Hey all, ? I'm in the middle of trying to figure out how I want my exhaust to exit on my 67 Chevelle and was wondering if anyone out there in Chevelle land has any photos to share of how they routed theirs. Thanks in advance! ? Cheers, ? Michou ? ? More new features than ever. Check out the new AOL Mail ! - http://webmail.aol.com
Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought
Beautiful car...You must be very proudI would be..Since I have been
looking for a 67 for 2 yearsJerry
_
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Brad Waller
Sent: Friday, February 22, 2008 10:56 AM
To: 'The Chevelle Mailing List'
Subject: Re: [Chevelle-list] 67 Chevelle exhaust exit routing
photos sought
I don't have routing pictures, but the shop just bent the pipes
to go over the axle and exit just behind the rear wheels. You can see
the pipe in this whole car picture: http://epage.com/brad/Chevelle/ as
well as some of the pictures on the page for the new V45 wheels.
Brad Waller ([EMAIL PROTECTED])
'66 Corvette | 327/dead | 4-speed | Wilwood Brakes | 245/45/16
BFG R1
'67 Chevelle | ex-SS396 | 355/700R4 | F-Body Brakes | 275/40/17
Kumho MX
_
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Michou Olivera
Sent: Thursday, February 21, 2008 4:41 PM
To: chevelle-list@chevelles.net
Subject: [Chevelle-list] 67 Chevelle exhaust exit
routing photos sought
Hey all,
I'm in the middle of trying to figure out how I want my
exhaust to exit on my 67 Chevelle and was wondering if anyone out there
in Chevelle land has any photos to share of how they routed theirs.
Thanks in advance!
Cheers,
Michou
Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought
I don't have routing pictures, but the shop just bent the pipes to go over the axle and exit just behind the rear wheels. You can see the pipe in this whole car picture: http://epage.com/brad/Chevelle/ as well as some of the pictures on the page for the new V45 wheels. Brad Waller ([EMAIL PROTECTED]) '66 Corvette | 327/dead | 4-speed | Wilwood Brakes | 245/45/16 BFG R1 '67 Chevelle | ex-SS396 | 355/700R4 | F-Body Brakes | 275/40/17 Kumho MX _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michou Olivera Sent: Thursday, February 21, 2008 4:41 PM To: chevelle-list@chevelles.net Subject: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought Hey all, I'm in the middle of trying to figure out how I want my exhaust to exit on my 67 Chevelle and was wondering if anyone out there in Chevelle land has any photos to share of how they routed theirs. Thanks in advance! Cheers, Michou
Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought
That is sweeet sounding. I will play that several times today. the sound gets me all excited.. woo-hoo. thanks, Herb - Original Message From: Herb Lumpp <[EMAIL PROTECTED]> To: The Chevelle Mailing List Sent: Friday, February 22, 2008 5:30:16 AM Subject: Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought It's not a photo but in this video clip you can see how I routed the tail pipes on my 66 Chevelle... http://s263.photobucket.com/albums/ii131/hlumpp/Chevelle/454/?action=view&cu rrent=MOV09471.flv The tail pipes are from Pypes but they didn't line up with the rest of the system (non-Pypes) so I had to cut and realign them and then weld them back together. Herb -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bill Bradley Sent: Thursday, February 21, 2008 10:26 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought I'd like to see that myself, i have the same dilemma. my exhaust ends at the output of my flowmaster 40's. Bill Bradley http://autos.groups.yahoo.com/group/chevellerestoration/ 67 Chevelle Malibu 305/700R4 http://www.cardomain.com/ride/1649723 71 Triumph Spitfire http://www.cardomain.com/ride/2506950 82 Kawasaki KZ305CSR Michou Olivera <[EMAIL PROTECTED]> wrote: Hey all, I'm in the middle of trying to figure out how I want my exhaust to exit on my 67 Chevelle and was wondering if anyone out there in Chevelle land has any photos to share of how they routed theirs. Thanks in advance! Cheers, Michou -- Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought
It's not a photo but in this video clip you can see how I routed the tail pipes on my 66 Chevelle... http://s263.photobucket.com/albums/ii131/hlumpp/Chevelle/454/?action=view&cu rrent=MOV09471.flv The tail pipes are from Pypes but they didn't line up with the rest of the system (non-Pypes) so I had to cut and realign them and then weld them back together. Herb -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bill Bradley Sent: Thursday, February 21, 2008 10:26 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought I'd like to see that myself, i have the same dilemma. my exhaust ends at the output of my flowmaster 40's. Bill Bradley http://autos.groups.yahoo.com/group/chevellerestoration/ 67 Chevelle Malibu 305/700R4 http://www.cardomain.com/ride/1649723 71 Triumph Spitfire http://www.cardomain.com/ride/2506950 82 Kawasaki KZ305CSR Michou Olivera <[EMAIL PROTECTED]> wrote: Hey all, I'm in the middle of trying to figure out how I want my exhaust to exit on my 67 Chevelle and was wondering if anyone out there in Chevelle land has any photos to share of how they routed theirs. Thanks in advance! Cheers, Michou --
Re: [Chevelle-list] 67 Chevelle exhaust exit routing photos sought
I'd like to see that myself, i have the same dilemma. my exhaust ends at the output of my flowmaster 40's. Bill Bradley http://autos.groups.yahoo.com/group/chevellerestoration/ 67 Chevelle Malibu 305/700R4 http://www.cardomain.com/ride/1649723 71 Triumph Spitfire http://www.cardomain.com/ride/2506950 82 Kawasaki KZ305CSR Michou Olivera <[EMAIL PROTECTED]> wrote: Hey all, I'm in the middle of trying to figure out how I want my exhaust to exit on my 67 Chevelle and was wondering if anyone out there in Chevelle land has any photos to share of how they routed theirs. Thanks in advance! Cheers, Michou --
