Re: [CinCVS] Will not compile - Open SUSE 10.1
Hi Pierre Looking at the href you gave, I agree that your patch seems alright. Can't really apply it to svn until merge is complete... Pierre I wonder if this patch can be apply now that the merge is almost finished (I guess at least). Agur Alexis Ballier wrote: Yes I think the best solution is to ask x264 devs. Before writing this patch I had a look at how it has been fixed in other softs, and for the ffmpeg part included in cinelerra it's how it has been fixed by ffmpeg devs. The part I had to think more about is the quicktime part, but it should be similar to the fixes I've seen. You might also want to have a look at [1] to see how the api changed, and I agree that's strange to replace cbr by abr... [1] https://trac.videolan.org/x264/changeset/537 https://trac.videolan.org/x264/changeset/537 -- Alexis Ballier. ___ Cinelerra mailing list Cinelerra@skolelinux.no https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra -- ___ Cinelerra mailing list Cinelerra@skolelinux.no https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
Re: [CinCVS] Will not compile - Open SUSE 10.1
Applied. ga wrote: Hi Pierre Looking at the href you gave, I agree that your patch seems alright. Can't really apply it to svn until merge is complete... Pierre I wonder if this patch can be apply now that the merge is almost finished (I guess at least). Agur Alexis Ballier wrote: Yes I think the best solution is to ask x264 devs. Before writing this patch I had a look at how it has been fixed in other softs, and for the ffmpeg part included in cinelerra it's how it has been fixed by ffmpeg devs. The part I had to think more about is the quicktime part, but it should be similar to the fixes I've seen. You might also want to have a look at [1] to see how the api changed, and I agree that's strange to replace cbr by abr... [1] https://trac.videolan.org/x264/changeset/537 https://trac.videolan.org/x264/changeset/537 -- Alexis Ballier. ___ Cinelerra mailing list Cinelerra@skolelinux.no https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra -- __ Get Firefox! http://www.mozilla.org/products/firefox/ Mr Pierre Dumuid Phd Student Active Noise and Vibration Control Group School of Mechanical Engineering The University of Adelaide SA 5005 AUSTRALIA Email: [EMAIL PROTECTED] [EMAIL PROTECTED] Work: +61 (0)8 8303 3847 Mobile: 0407 570 263 Web Page : http://www.mecheng.adelaide.edu.au/ __ CRICOS Provider Number 00123M --- This email message is intended only for the addressee(s) and contains information that may be confidential and/or copyright. If you are not the intended recipient please notify the sender by reply email and immediately delete this email. Use, disclosure or reproduction of this email by anyone other than the intended recipient(s) is strictly prohibited. No representation is made that this email or any attachments are free of viruses. Virus scanning is recommended and is the responsibility of the recipient. begin:vcard fn:Pierre Dumuid n:Dumuid;Pierre org:The University of Adelaide;Mechanical Engineering adr:;;;Adelaide;South Australia;5005;Australia email;internet:[EMAIL PROTECTED] title:Postgraduate Student tel;work:8303 3847 tel;home:8388 5727 tel;cell:0407570263 note:CRICOS Provider Number 00123M x-mozilla-html:TRUE url:http://www.adelaide.edu.au version:2.1 end:vcard
Re: [CinCVS] Will not compile - Open SUSE 10.1
Hi Scott, What is the preferred capture method from DV everyone uses? Cinelerra internal, or other applications? I have used Kino before to capture DV, under OpenSUSE. It was not easy to do, as OpenSUSE's version of Kino does not support Quicktime DV out of the box; and Cinelerra does not understand raw DV, so I had to recompile Kino and update a lot of libraries. Having DV capture in Cinelerra would have been great, but unfortunately it does not seem to be very stable. Alex Fernandez. ___ Cinelerra mailing list Cinelerra@skolelinux.no https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
Re: libx264 fix WORKED! was Re: newbie here, was Re: [CinCVS] Will not compile - Open SUSE 10.1
On Sunday 27 August 2006 23:28, Yama Ploskonka wrote: ln -s libx264.so.46 libx264.so.45 This apparently (?) makes Cinelerra believe you have libx264.so.45 while it actually uses libx264.so.46. This will likely crash cinelerra, _if_ you use h264 encoding. It still has that runaway thing that when I start play, sometimes it will not want to stop and will become completely unresponsive. Any fix for that? Go to Settings-Preferences-Playback; if you have choosen the ALSA audio driver, then enable Stop playback locks up. -- Hannes ___ Cinelerra mailing list Cinelerra@skolelinux.no https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
Re: [CinCVS] Will not compile - Open SUSE 10.1
Thank you the x264 patch worked for me as well. Suse 10.1 amdx2 64 I love cinelerra on amd 64 this it's so fast. The future is almost here. Kudos and Thanks Again Daniel ___ Cinelerra mailing list Cinelerra@skolelinux.no https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
Re: [CinCVS] Will not compile - Open SUSE 10.1
Scott, If you manage to get things working on Suse 10.1, I for one will want to know. I am happy with my setup, but my Cine is not stable, and I don't quite feel like getting into another distro just to make Cine happy. (I might, though. I'm starting to be that desperate :-) Yama Scott Forbes wrote: Hi All, I'm really sorry to ask a question that has probably been asked before. I cannot get a fresh svn copy, version 840, of Cinelerra to compile. Here is the output from make: x264.c: In function 'X264_init': x264.c:139: error: 'struct anonymous' has no member named 'b_cbr' make[5]: *** [x264.lo] Error 1 make[5]: Leaving directory `/home/scott/svn/hvirtual/quicktime/ffmpeg/libavcodec' make[4]: *** [all-recursive] Error 1 make[4]: Leaving directory `/home/scott/svn/hvirtual/quicktime/ffmpeg/libavcodec' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/home/scott/svn/hvirtual/quicktime/ffmpeg' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/home/scott/svn/hvirtual/quicktime' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/scott/svn/hvirtual' make: *** [all] Error 2 I did do some research in the archives, and I am gathering that it is a problem with the ffmpeg b_cbr stuff, but I could not find a solution. I am not having much luck, I first worked with the source from Heroine Virtual, but gave up on that one in about 2 weeks of trying to get it to compile. I found the CV version and thought I would give it a try. I do have all the required libraries, etc. The configure script runs without errors. My platform is a 1700MHz Pentium M in a Compaq notebook. I appreciate any help you can provide, please let me know if you need version info on tools, libs, etc. Thank you so much, Scott ___ Cinelerra mailing list Cinelerra@skolelinux.no https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra ___ Cinelerra mailing list Cinelerra@skolelinux.no https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
Re: [CinCVS] Will not compile - Open SUSE 10.1
Yama, I know what you mean. I did get the Heroin Virt one to compile once after messing with everything for two weeks, but it crashed all the time. Is this a SUSE thing with Cinelerra? Are the various Distros that different now? Yama Ploskonka wrote: Scott, If you manage to get things working on Suse 10.1, I for one will want to know. I am happy with my setup, but my Cine is not stable, and I don't quite feel like getting into another distro just to make Cine happy. (I might, though. I'm starting to be that desperate :-) Yama Scott Forbes wrote: Hi All, I'm really sorry to ask a question that has probably been asked before. I cannot get a fresh svn copy, version 840, of Cinelerra to compile. Here is the output from make: x264.c: In function 'X264_init': x264.c:139: error: 'struct anonymous' has no member named 'b_cbr' make[5]: *** [x264.lo] Error 1 make[5]: Leaving directory `/home/scott/svn/hvirtual/quicktime/ffmpeg/libavcodec' make[4]: *** [all-recursive] Error 1 make[4]: Leaving directory `/home/scott/svn/hvirtual/quicktime/ffmpeg/libavcodec' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/home/scott/svn/hvirtual/quicktime/ffmpeg' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/home/scott/svn/hvirtual/quicktime' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/scott/svn/hvirtual' make: *** [all] Error 2 I did do some research in the archives, and I am gathering that it is a problem with the ffmpeg b_cbr stuff, but I could not find a solution. I am not having much luck, I first worked with the source from Heroine Virtual, but gave up on that one in about 2 weeks of trying to get it to compile. I found the CV version and thought I would give it a try. I do have all the required libraries, etc. The configure script runs without errors. My platform is a 1700MHz Pentium M in a Compaq notebook. I appreciate any help you can provide, please let me know if you need version info on tools, libs, etc. Thank you so much, Scott ___ Cinelerra mailing list Cinelerra@skolelinux.no https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra ___ Cinelerra mailing list Cinelerra@skolelinux.no https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra ___ Cinelerra mailing list Cinelerra@skolelinux.no https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
Re: [CinCVS] Will not compile - Open SUSE 10.1
Hi, I've had exactly the same problem and wrote a patch to fix this. It seems to work, but I think more tests are needed.I'm attaching the patch (against svn of trunk/hvirtual rev 840).Regards,
-- Alexis Ballier.
--- cinelerra-cvs-20060827/quicktime/qth264.c 2006-08-27 00:32:07.130566427 +0200
+++ working/quicktime/qth264.c 2006-08-27 03:00:58.486699204 +0200
@@ -136,7 +136,11 @@
x264_param_t default_params;
x264_param_default(default_params);
// Reset quantizer if fixed bitrate
+#if X264_BUILD 48
if(codec-param.rc.b_cbr)
+#else
+ if(codec-param.rc.i_rc_method == X264_RC_ABR )
+#endif
{
codec-param.rc.i_qp_constant = default_params.rc.i_qp_constant;
codec-param.rc.i_qp_min = default_params.rc.i_qp_min;
@@ -469,7 +473,11 @@
}
else
if(!strcasecmp(key, h264_fix_bitrate))
+#if X264_BUILD 48
codec-param.rc.b_cbr = (*(int*)value) / 1000;
+#else
+ codec-param.rc.i_bitrate = (*(int*)value) / 1000;
+#endif
}
}
--- cinelerra-cvs-20060827/quicktime/ffmpeg/libavcodec/x264.c 2006-08-27 00:32:00.564013252 +0200
+++ working/quicktime/ffmpeg/libavcodec/x264.c 2006-08-27 02:47:49.224599225 +0200
@@ -135,8 +135,13 @@
x4-params.i_keyint_max = avctx-gop_size;
x4-params.rc.i_bitrate = avctx-bit_rate / 1000;
x4-params.rc.i_vbv_buffer_size = avctx-rc_buffer_size / 1000;
-if(avctx-rc_buffer_size)
+if(avctx-rc_buffer_size){
+#if X264_BUILD 48
x4-params.rc.b_cbr = 1;
+#else
+ x4-params.rc.i_rc_method = X264_RC_ABR;
+#endif
+}
x4-params.i_bframe = avctx-max_b_frames;
x4-params.b_cabac = avctx-coder_type == FF_CODER_TYPE_AC;
Re: [CinCVS] Will not compile - Open SUSE 10.1
I don't know much about the x264 stuff, but was thinking of forwarding
this patch on to the x264 mailing list to ask if the changes look about
right? (I am sure they'd know the best...)
Looking at the patch, I can guess that b_cbr means ?? constant
bit-rate and X264_RC_ABR means ?? average bit rate,
Just a quick (possibly dumb) question: Aren't constant and average
might be different?? (i.e. constant would be constant frame size,
whilst average, would be varying frame size, but average over the whole
file)
Alexis Ballier wrote:
Hi,
I've had exactly the same problem and wrote a patch to fix this. It
seems to work, but I think more tests are needed.
I'm attaching the patch (against svn of trunk/hvirtual rev 840).
Regards,
--
Alexis Ballier.
--- cinelerra-cvs-20060827/quicktime/qth264.c 2006-08-27 00:32:07.130566427
+0200
+++ working/quicktime/qth264.c 2006-08-27 03:00:58.486699204 +0200
@@ -136,7 +136,11 @@
x264_param_t default_params;
x264_param_default(default_params);
// Reset quantizer if fixed bitrate
+#if X264_BUILD 48
if(codec-param.rc.b_cbr)
+#else
+ if(codec-param.rc.i_rc_method == X264_RC_ABR )
+#endif
{
codec-param.rc.i_qp_constant =
default_params.rc.i_qp_constant;
codec-param.rc.i_qp_min = default_params.rc.i_qp_min;
@@ -469,7 +473,11 @@
}
else
if(!strcasecmp(key, h264_fix_bitrate))
+#if X264_BUILD 48
codec-param.rc.b_cbr = (*(int*)value) / 1000;
+#else
+ codec-param.rc.i_bitrate = (*(int*)value) / 1000;
+#endif
}
}
--- cinelerra-cvs-20060827/quicktime/ffmpeg/libavcodec/x264.c 2006-08-27 00:32:00.564013252 +0200
+++ working/quicktime/ffmpeg/libavcodec/x264.c 2006-08-27 02:47:49.224599225
+0200
@@ -135,8 +135,13 @@
x4-params.i_keyint_max = avctx-gop_size;
x4-params.rc.i_bitrate = avctx-bit_rate / 1000;
x4-params.rc.i_vbv_buffer_size = avctx-rc_buffer_size / 1000;
-if(avctx-rc_buffer_size)
+if(avctx-rc_buffer_size){
+#if X264_BUILD 48
x4-params.rc.b_cbr = 1;
+#else
+ x4-params.rc.i_rc_method = X264_RC_ABR;
+#endif
+}
x4-params.i_bframe = avctx-max_b_frames;
x4-params.b_cabac = avctx-coder_type == FF_CODER_TYPE_AC;
___
Cinelerra mailing list
Cinelerra@skolelinux.no
https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
Re: [CinCVS] Will not compile - Open SUSE 10.1
Yes I think the best solution is to ask x264 devs.Before writing this patch I had a look at how it has been fixed in other softs, and for the ffmpeg part included in cinelerra it's how it has been fixed by ffmpeg devs. The part I had to think more about is the quicktime part, but it should be similar to the fixes I've seen. You might also want to have a look at [1] to see how the api changed, and I agree that's strange to replace cbr by abr...[1] https://trac.videolan.org/x264/changeset/537 -- Alexis Ballier.
Re: [CinCVS] Will not compile - Open SUSE 10.1
Looking at the href you gave, I agree that your patch seems alright. Can't really apply it to svn until merge is complete... Pierre Alexis Ballier wrote: Yes I think the best solution is to ask x264 devs. Before writing this patch I had a look at how it has been fixed in other softs, and for the ffmpeg part included in cinelerra it's how it has been fixed by ffmpeg devs. The part I had to think more about is the quicktime part, but it should be similar to the fixes I've seen. You might also want to have a look at [1] to see how the api changed, and I agree that's strange to replace cbr by abr... [1] https://trac.videolan.org/x264/changeset/537 https://trac.videolan.org/x264/changeset/537 -- Alexis Ballier. ___ Cinelerra mailing list Cinelerra@skolelinux.no https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
Re: [CinCVS] Will not compile - Open SUSE 10.1
Alexis, Thank you so much for the patch, it worked great! I was able to re-update my x264 libs and compile after I patched the code. Is Cinelerra able to use accelerated video drivers? I have a ATI Raedon Mobility 9000 in this machine. I quickly played a couple of clips I had captured with Kino and the Audio / video does not sync then I got a couple of crashes. Time to read the docs now that I got it compiled. What is the preferred capture method from DV everyone uses? Cinelerra internal, or other applications? Thank you Alexis and all the rest! Scott Alexis Ballier wrote: Hi, I've had exactly the same problem and wrote a patch to fix this. It seems to work, but I think more tests are needed. I'm attaching the patch (against svn of trunk/hvirtual rev 840). Regards, -- Alexis Ballier. snip ___ Cinelerra mailing list Cinelerra@skolelinux.no https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
newbie here, was Re: [CinCVS] Will not compile - Open SUSE 10.1
oh my. How do I run Alexis' patch?
BTW, it seems a bunch of people have this issue,
http://www.google.com/search?q=libx264+cinelerra+suse
one interesting suggestion (that didn't work for me) was to try this
from console
su
/usr/lib
ln -s libx264.so.48 libx264.so.45
Yama
Alexis Ballier wrote:
Hi,
I've had exactly the same problem and wrote a patch to fix this. It
seems to
work, but I think more tests are needed.
I'm attaching the patch (against svn of trunk/hvirtual rev 840).
Regards,
--- cinelerra-cvs-20060827/quicktime/qth264.c 2006-08-27 00:32:07.130566427
+0200
+++ working/quicktime/qth264.c2006-08-27 03:00:58.486699204 +0200
@@ -136,7 +136,11 @@
x264_param_t default_params;
x264_param_default(default_params);
// Reset quantizer if fixed bitrate
+#if X264_BUILD 48
if(codec-param.rc.b_cbr)
+#else
+ if(codec-param.rc.i_rc_method == X264_RC_ABR )
+#endif
{
codec-param.rc.i_qp_constant =
default_params.rc.i_qp_constant;
codec-param.rc.i_qp_min = default_params.rc.i_qp_min;
@@ -469,7 +473,11 @@
}
else
if(!strcasecmp(key, h264_fix_bitrate))
+#if X264_BUILD 48
codec-param.rc.b_cbr = (*(int*)value) / 1000;
+#else
+ codec-param.rc.i_bitrate = (*(int*)value) / 1000;
+#endif
}
}
--- cinelerra-cvs-20060827/quicktime/ffmpeg/libavcodec/x264.c 2006-08-27
00:32:00.564013252 +0200
+++ working/quicktime/ffmpeg/libavcodec/x264.c2006-08-27
02:47:49.224599225 +0200
@@ -135,8 +135,13 @@
x4-params.i_keyint_max = avctx-gop_size;
x4-params.rc.i_bitrate = avctx-bit_rate / 1000;
x4-params.rc.i_vbv_buffer_size = avctx-rc_buffer_size / 1000;
-if(avctx-rc_buffer_size)
+if(avctx-rc_buffer_size){
+#if X264_BUILD 48
x4-params.rc.b_cbr = 1;
+#else
+ x4-params.rc.i_rc_method = X264_RC_ABR;
+#endif
+}
x4-params.i_bframe = avctx-max_b_frames;
x4-params.b_cabac = avctx-coder_type == FF_CODER_TYPE_AC;
___
Cinelerra mailing list
Cinelerra@skolelinux.no
https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
libx264 fix WORKED! was Re: newbie here, was Re: [CinCVS] Will not compile - Open SUSE 10.1
actually a bit differently from what I posted previously 1) Run Cinelerra from console /usr/bin/cinelerra in my case that told me that libx264.so.45 was missing. 2) see what libx264 you have. in the console, cd /usr/lib ls libx264* that showed me I had libx264.so.46 3) link that libx264 version to the one Cinelerra requests You will need to enter as root su (enter password) ln -s libx264.so.46 libx264.so.45 This apparently (?) makes Cinelerra believe you have libx264.so.45 while it actually uses libx264.so.46. 4) Run Cinelerra well, it hasn't crashed yet. It complains it cannot find a couple plugins and cannot open the usr/bin/cinelerra directory, but otherwise seems fine. It still has that runaway thing that when I start play, sometimes it will not want to stop and will become completely unresponsive. Any fix for that? Yama Yama Ploskonka wrote: one interesting suggestion (that didn't work for me) was to try this from console su /usr/lib ln -s libx264.so.48 libx264.so.45 ___ Cinelerra mailing list Cinelerra@skolelinux.no https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
Re: newbie here, was Re: [CinCVS] Will not compile - Open SUSE 10.1
Hi,
Here is how I applied the patch to the SVN source tree.
- download patch to the hvirtual directory SVN created
- from a terminal window cd to the hvirtual directory
- run command : patch -i x264.patch
it will display something like this:
Perhaps you should have used the -p or --strip option?
The text leading up to this was:
--
|--- cinelerra-cvs-20060827/quicktime/qth264.c 2006-08-27
00:32:07.130566427 +0200
|+++ working/quicktime/qth264.c 2006-08-27 03:00:58.486699204 +0200
--
File to patch:
Type in the path to file as ./quicktime/qth264.c
The next file will be ./quicktime/ffmpeg/libavcodec/x264.c
That should do it, you can now do a make clean, a ./config and build
with make. It should compile fine, then install from root with make
install.
Hope this helps...
Scott
Yama Ploskonka wrote:
oh my. How do I run Alexis' patch?
BTW, it seems a bunch of people have this issue,
http://www.google.com/search?q=libx264+cinelerra+suse
one interesting suggestion (that didn't work for me) was to try this
from console
su
/usr/lib
ln -s libx264.so.48 libx264.so.45
Yama
Alexis Ballier wrote:
Hi,
I've had exactly the same problem and wrote a patch to fix this. It
seems to
work, but I think more tests are needed.
I'm attaching the patch (against svn of trunk/hvirtual rev 840).
Regards,
--- cinelerra-cvs-20060827/quicktime/qth264.c2006-08-27
00:32:07.130566427 +0200
+++ working/quicktime/qth264.c 2006-08-27 03:00:58.486699204 +0200
@@ -136,7 +136,11 @@
x264_param_t default_params;
x264_param_default(default_params);
// Reset quantizer if fixed bitrate
+#if X264_BUILD 48
if(codec-param.rc.b_cbr)
+#else
+if(codec-param.rc.i_rc_method == X264_RC_ABR )
+#endif
{
codec-param.rc.i_qp_constant =
default_params.rc.i_qp_constant;
codec-param.rc.i_qp_min = default_params.rc.i_qp_min;
@@ -469,7 +473,11 @@
}
else
if(!strcasecmp(key, h264_fix_bitrate))
+#if X264_BUILD 48
codec-param.rc.b_cbr = (*(int*)value) / 1000;
+#else
+codec-param.rc.i_bitrate = (*(int*)value) / 1000;
+#endif
}
}
--- cinelerra-cvs-20060827/quicktime/ffmpeg/libavcodec/x264.c
2006-08-27 00:32:00.564013252 +0200
+++ working/quicktime/ffmpeg/libavcodec/x264.c 2006-08-27
02:47:49.224599225 +0200
@@ -135,8 +135,13 @@
x4-params.i_keyint_max = avctx-gop_size;
x4-params.rc.i_bitrate = avctx-bit_rate / 1000;
x4-params.rc.i_vbv_buffer_size = avctx-rc_buffer_size / 1000;
-if(avctx-rc_buffer_size)
+if(avctx-rc_buffer_size){
+#if X264_BUILD 48
x4-params.rc.b_cbr = 1;
+#else
+x4-params.rc.i_rc_method = X264_RC_ABR;
+#endif
+}
x4-params.i_bframe = avctx-max_b_frames;
x4-params.b_cabac = avctx-coder_type == FF_CODER_TYPE_AC;
___
Cinelerra mailing list
Cinelerra@skolelinux.no
https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
___
Cinelerra mailing list
Cinelerra@skolelinux.no
https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
Re: newbie here, was Re: [CinCVS] Will not compile - Open SUSE 10.1
Hi, cd hvirtualpatch -p1 /path/to/the/patch/x264.patchit was intended to be used like that and it should patch without asking questions ;)Btw, doing a symbolic link of the library will probably make cinelerra unstable, you can expect seg faults when using x264 stuff. -- Alexis Ballier.
