RE: Frame Relay switch
The "DCE" that is referenced in setting up a router to use as a frame relay switch is different than the physical layer DCE reference that requires that a clock rate be defined. Connie -Original Message- From: Nigel Taylor [mailto:[EMAIL PROTECTED]] Sent: Wednesday, June 14, 2000 6:47 PM To: [EMAIL PROTECTED]; M Z Cc: Bryant Andrews Subject: Re: Frame Relay switch Taking into account that the router you have does meet all the requirements for a FR switch all that is really needed is the command; Frame_switch(config)#frame-relay switching since your frame switch is normally considered the DCE you'll also want to enable you clock rate on the connecting serial interfaces. As well you could use the following interface commands. Frame_switch(config-if)#encapsulation frame-relay Frame_switch(config-if)#clock rate 64000 Frame_switch(config-if)#frame-relay intf-type dce these are some of you basic commands for the frame switch. My $0.02 HTH Nigel - Original Message - From: M Z [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, June 15, 2000 4:14 AM Subject: Frame Relay switch Would anyone kindly share how to config a Cisco router to act as a FR switch. Thanks in advance. Mz Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CCNA and subnetting questions
"ip subnet-zero" is a global command that allows the use of subnet zero for interface addresses and routing updates. To disable the use of subnet-zero, and return to the default, use the "no" form of the command. "no ip subnet-zero" -Original Message- From: Niraj Palikhey [mailto:[EMAIL PROTECTED]] Sent: Tuesday, June 06, 2000 12:57 PM To: Constance Cate; [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: RE: CCNA and subnetting questions I forget the use of the ip subnet zero command? Can you clarify? Thanks. From: "Cate, Constance" [EMAIL PROTECTED] Reply-To: "Cate, Constance" [EMAIL PROTECTED] To: "'Seth Wilson'" [EMAIL PROTECTED], "'[EMAIL PROTECTED]'" [EMAIL PROTECTED] Subject: RE: CCNA and subnetting questions Date: Mon, 5 Jun 2000 08:03:39 -0700 1) Read the question, they will tell you what they want you to know; they just don't say it very clearly sometimes. Just like the real world where you have to go plowing through the s*^ to get to the info you need. 2) If they don't say differently in the question that you read very carefully, grin then the assumption is that you cannot use the "zero subnets." When you are preparing for a test remember that you are expected to understand the default behavior of the IOS version you are being tested on. If the question does not specify a different configuration from the default, then assume the default. Sometimes the information is implied by some configuration detail and not directly stated, so. think through all the implications of the information you are given. -Original Message- From: Seth Wilson [mailto:[EMAIL PROTECTED]] Sent: Thursday, June 01, 2000 6:40 PM To: [EMAIL PROTECTED] Subject: CCNA and subnetting questions Hello everybody, Well, I'm taking a stab at the CCNA this Monday. I'm wondering if, for the purposes of the exam, that when you get subnetting questions whether you're supposed to assume that subnet-zero has been enabled or not. I just recently completed my MCSE, and with all the Microsoft tests the zero subnets cannot be used. But I've seen it both ways in studying for the CCNA. Thanks in advance. ~Seth~ ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CCNA and subnetting questions
1) Read the question, they will tell you what they want you to know; they just don't say it very clearly sometimes. Just like the real world where you have to go plowing through the s*^ to get to the info you need. 2) If they don't say differently in the question that you read very carefully, grin then the assumption is that you cannot use the "zero subnets." When you are preparing for a test remember that you are expected to understand the default behavior of the IOS version you are being tested on. If the question does not specify a different configuration from the default, then assume the default. Sometimes the information is implied by some configuration detail and not directly stated, so. think through all the implications of the information you are given. -Original Message- From: Seth Wilson [mailto:[EMAIL PROTECTED]] Sent: Thursday, June 01, 2000 6:40 PM To: [EMAIL PROTECTED] Subject: CCNA and subnetting questions Hello everybody, Well, I'm taking a stab at the CCNA this Monday. I'm wondering if, for the purposes of the exam, that when you get subnetting questions whether you're supposed to assume that subnet-zero has been enabled or not. I just recently completed my MCSE, and with all the Microsoft tests the zero subnets cannot be used. But I've seen it both ways in studying for the CCNA. Thanks in advance. ~Seth~ ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]