CCIE R/S written exam
Has anyone had experience with Boson's test for R/S. I am scheduled to take my exam and would like to see how well I think I am doing.
Password Question
I have this router that someone must have entered no service = password-recovery and I don't have the password. You are unable to get = into Rommon to change the confreg. Is there a work around this or do I = have to call Cisco. Thanks _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Pwd Question
I have this router that someone must have entered no service password-recovery and I don't have the password. You are unable to get into Rommon to change the confreg. Is there a work around this or do I have to call Cisco. Thanks _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Pwd Question
RE: Pwd QuestionDon, It is an undocumented command. - Original Message -=20 From: Taylor, Don=20 To: 'Eric Fisher' ; [EMAIL PROTECTED]=20 Sent: Tuesday, December 19, 2000 4:13 PM Subject: RE: Pwd Question I searched on CCO and can find no record of "no service = password-recovery"; I don't believe there is such an animal. You're not = using an older version of HyperTerminal, are you? The old version didn't = send the break signal properly. You can try the newer version or a = different terminal emulator altogether if this is the case. - Don=20 -----Original Message-=20 From: Eric Fisher [mailto:[EMAIL PROTECTED]]=20 Sent: Tuesday, December 19, 2000 12:54 PM=20 To: [EMAIL PROTECTED]=20 Subject: Pwd Question=20 I have this router that someone must have entered no service=20 password-recovery and I don't have the password. You are unable to = get into=20 Rommon to change the confreg. Is there a work around this or do I = have to=20 call Cisco.=20 Thanks=20 _=20 FAQ, list archives, and subscription info: = http://www.groupstudy.com/list/cisco.html=20 Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] = _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Clairifcation of PWD problem.
It has nothing to do with the hyperterm. I am having this problem with = has enterprise 12.1.1 on it. When you issue this command no service = password-recovery in global config you will get a warning message. I = had a client hit yes to it and they forgot the password. You can not = break into rommon you get a error message when you try to. If he knew = the password I would be able to turn it off with service = password-recovery for global config. You will not find anything on the = cco it is a undocumented command and in order to try this the command = has to be type out in full.=20 _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BOSON for CCIE written
Can someone verify that these tests are good. I would like to see how = well I am doing before I take the test tommorow. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Reading the RIF
If anyone has any good info on reading the RIF please send it along to = me. Thanks Eric _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Thanks
Thank you all for the great posts. Passed my written today with an 80%. = =20 _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Pwd Question
conf t Enter configuration commands, one per line. End with CNTL/Z. r6(config)#no service password-recovery WARNING: Executing this command will disable password recovery mechanism. Do not execute this command without another plan for password recovery. Are you sure you want to continue? [yes/no]: y I reloaded the router and here is the output below from trying to issue a ctrl break Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) Copyright (c) 1999 by cisco Systems, Inc. TAC:Home:SW:IOS:Specials for info PC = 0xfff14ee8, Vector = 0x500, SP = 0x680127b0 C2600 platform with 49152 Kbytes of main memory PASSWORD RECOVERY FUNCTIONALITY IS DISABLED here I am turning this feature off. conf t Enter configuration commands, one per line. End with CNTL/Z. r6(config)#service password-recovery - Original Message - From: "Donald B Johnson Jr" <[EMAIL PROTECTED]> To: "Eric Fisher" <[EMAIL PROTECTED]>; "Taylor, Don" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Wednesday, December 27, 2000 12:52 PM Subject: Re: Pwd Question > routerb(config)# > routerb(config)#service password-recovery >^ > % Invalid input detected at '^' marker. > > routerb(config)# no service password-recovery > ^ > % Invalid input detected at '^' marker. > > routerb(config)# > > routerb(config)# > Duck > - Original Message - > From: Eric Fisher <[EMAIL PROTECTED]> > To: Taylor, Don <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> > Sent: Tuesday, December 19, 2000 1:25 PM > Subject: Re: Pwd Question > > > > RE: Pwd QuestionDon, > > > > It is an undocumented command. > > > > > > > > - Original Message -=20 > > From: Taylor, Don=20 > > To: 'Eric Fisher' ; [EMAIL PROTECTED]=20 > > Sent: Tuesday, December 19, 2000 4:13 PM > > Subject: RE: Pwd Question > > > > > > I searched on CCO and can find no record of "no service = > > password-recovery"; I don't believe there is such an animal. You're not = > > using an older version of HyperTerminal, are you? The old version didn't = > > send the break signal properly. You can try the newer version or a = > > different terminal emulator altogether if this is the case. > > > > - Don=20 > > > > -Original Message-=20 > > From: Eric Fisher [mailto:[EMAIL PROTECTED]]=20 > > Sent: Tuesday, December 19, 2000 12:54 PM=20 > > To: [EMAIL PROTECTED]=20 > > Subject: Pwd Question=20 > > > > > > > > I have this router that someone must have entered no service=20 > > password-recovery and I don't have the password. You are unable to = > > get into=20 > > Rommon to change the confreg. Is there a work around this or do I = > > have to=20 > > call Cisco.=20 > > > > Thanks=20 > > > > > > > > _=20 > > FAQ, list archives, and subscription info: = > > http://www.groupstudy.com/list/cisco.html=20 > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] = > > > > > > > > _ > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Pwd Question
Hi Donald, here is the config for this take a look conf t Enter configuration commands, one per line. End with CNTL/Z. r6(config)#no service password-recovery WARNING: Executing this command will disable password recovery mechanism. Do not execute this command without another plan for password recovery. Are you sure you want to continue? [yes/no]: y I reloaded the router and here is the output below from trying to issue a ctrl break Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) Copyright (c) 1999 by cisco Systems, Inc. TAC:Home:SW:IOS:Specials for info PC = 0xfff14ee8, Vector = 0x500, SP = 0x680127b0 C2600 platform with 49152 Kbytes of main memory PASSWORD RECOVERY FUNCTIONALITY IS DISABLED here I am turning this feature off. conf t Enter configuration commands, one per line. End with CNTL/Z. r6(config)#service password-recovery -Original Message- From: Donald B Johnson Jr [mailto:[EMAIL PROTECTED]] Sent: Wednesday, December 27, 2000 12:52 PM To: Eric Fisher; Taylor, Don; [EMAIL PROTECTED] Subject: Re: Pwd Question routerb(config)# routerb(config)#service password-recovery ^ % Invalid input detected at '^' marker. routerb(config)# no service password-recovery ^ % Invalid input detected at '^' marker. routerb(config)# routerb(config)# Duck - Original Message ----- From: Eric Fisher <[EMAIL PROTECTED]> To: Taylor, Don <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Tuesday, December 19, 2000 1:25 PM Subject: Re: Pwd Question > RE: Pwd QuestionDon, > > It is an undocumented command. > > > > - Original Message -=20 > From: Taylor, Don=20 > To: 'Eric Fisher' ; [EMAIL PROTECTED]=20 > Sent: Tuesday, December 19, 2000 4:13 PM > Subject: RE: Pwd Question > > > I searched on CCO and can find no record of "no service = > password-recovery"; I don't believe there is such an animal. You're not = > using an older version of HyperTerminal, are you? The old version didn't = > send the break signal properly. You can try the newer version or a = > different terminal emulator altogether if this is the case. > > - Don=20 > > -Original Message-=20 > From: Eric Fisher [mailto:[EMAIL PROTECTED]]=20 > Sent: Tuesday, December 19, 2000 12:54 PM=20 > To: [EMAIL PROTECTED]=20 > Subject: Pwd Question=20 > > > > I have this router that someone must have entered no service=20 > password-recovery and I don't have the password. You are unable to = > get into=20 > Rommon to change the confreg. Is there a work around this or do I = > have to=20 > call Cisco.=20 > > Thanks=20 > > > > _=20 > FAQ, list archives, and subscription info: = > http://www.groupstudy.com/list/cisco.html=20 > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] = > > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Passed BCRAN
There are definitely some questions on the 700. I don't remember how many but I would study it. Eric - Original Message - From: "Anton Khan" <[EMAIL PROTECTED]> To: "'Rah Sta '" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Tuesday, November 07, 2000 3:50 PM Subject: RE: Passed BCRAN > Scott, > > I am studying for the BCRAN right now and there is one issue that > contiues to puzzle me. Do we have to be familiar with the 700 series > routers or not. I figure anyone who has done the BCRAN recently would be in > the best position to answer this question so hopefully you or someone from > the study group will add their two cents. > > For what it's worth there are a lot of really bright and talented people on > this study group. It is a great resource for any up and coming CCNP or > CCIE. > > Anton > > > > > > -Original Message- > From: Rah Sta > To: [EMAIL PROTECTED]; [EMAIL PROTECTED] > Sent: 11/7/00 2:40 PM > Subject: Re: Passed BCRAN > > Scott, > > Thanks for the info. Were and how much is the one week Mentortech class > is. > What do you mean by archives? PEACE > > > > Raheem > > > >From: STRAND Scott <[EMAIL PROTECTED]> > >Reply-To: STRAND Scott <[EMAIL PROTECTED]> > >To: [EMAIL PROTECTED] > >Subject: Passed BCRAN > >Date: Mon, 06 Nov 2000 12:49:48 -0500 > > > >Passed BCRAN last friday with a score of 909 out of 1000. Here is how I > > >passed: > > > >Read Cisco-press book by Catherine Paquet (Good, gives alot of > information) > >Read McGraw-Hill book by Thomas & Quiggle (Also good, easier to read) > >Used Boson practice test 1. (Helpful) > >Took the one week training class at Mentortech. Mentor always does a > great > >job and the instructor (Steve Daleo) was excellent. > > > >The archives are correct as to what to study, ISDN (BRI&PRI), Async > dialup, > >PPP, TACACS+, NAT, etc. > > > >This was the easiest of the three CCNP tests I have passed (ACRC, > BCMSN, > >BCRAN). They give you a list of commands (About 40) that > >you can choose from for the fill in the blank questions. > > > >Three down, one (CIT) to go. I'll check the archives for CIT hints and > if > >the BOSON tests were good for CIT. > > > >--Scott > > > >_ > >FAQ, list archives, and subscription info: > >http://www.groupstudy.com/list/cisco.html > >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > _ > Get Your Private, Free E-mail from MSN Hotmail at > http://www.hotmail.com. > > Share information about yourself, create your own public profile at > http://profiles.msn.com. > > _ > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco Courseware for auction on Ebay Links below
http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=493419599 BCRAN http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=493423853 BCMSN http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=493485302 Cvoice _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
