CCIE lab ... Fast track [7:73235]
Hello, I am working on chapter 18 "CCIE Practical Studies volume 1" Is there any one like to work it out with me??? Cheers, HT Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73235&t=73235 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Default Route ... [7:72652]
Hi all, can any one tell us what will be the effect of these 2 default routes. ip route 0.0.0.0 0.0.0.0 20.20.20.1 ip route 0.0.0.0 0.0.0.0 20.20.10.1 200 is it possible to have 2 default route??? Cheers. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72652&t=72652 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Help !!! [7:72096]
what does it mean? and Why I am getting this message? TestR(config-line)#autoselect ppp %Autoselect w/o the interface command 'Async mode interactive' is useless Cheers Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72096&t=72096 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
interface and line to default [7:72095]
Hi all, To bring back the physical interface to it is default we use " default interface type number " global config mode The question is how we bring back the default sting for the Router#sho line yp Tx/RxA Modem Roty AccO AccI Uses Noise Overruns Int *0 CTY -- --- 0 0 0 - 65 AUX 9600/9600 -- --- 0 0 0 - * 66 VTY -- --- 1 0 0 - * 67 VTY -- --- 1 0 0 - 68 VTY -- --- 0 0 0 - 69 VTY -- --- 0 0 0 - 70 VTY -- --- 0 0 0 - How to make use of the following virtual interfaces? Virtual-Access Virtual-FrameRelay Virtual-Template Virtual-TokenRing Good luck :) Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72095&t=72095 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
one more time ISDN ... [7:72057]
Hi, I have a question I hope some one help... :) 1. Does the order of entering the commands under the physical and dialer profile makes any difference. -- interface BRI0/0 no ip address encapsulation ppp no ip route-cache no ip mroute-cache dialer pool-member 1 isdn switch-type basic-net3 no cdp enable ppp authentication chap ppp multilink ! interface Dialer0 description Dialer 2 test_lab ip address 10.10.10.1 255.255.255.252 encapsulation ppp dialer pool 1 dialer remote-name test_lab dialer string 12123633 class myclass dialer string 12123634 class myclass dialer load-threshold 128 either dialer-group 5 ppp authentication chap ppp multilink - 2. Can we have configuration like this? and how it will work? ip route 0.0.0.0 0.0.0.0 172.20.14.2 ip route 0.0.0.0 0.0.0.0 172.21.14.2 200 cheers Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72057&t=72057 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ISDN ... connectivity [7:72051]
Hi, Can we connect 2 ISDN ports back to back for test ? (with out ISDN simulation device) Is there any kind cable to do this job? cheers Heiman. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72051&t=72051 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ISDN Port goes to Deactivated mode [7:72022]
Hi, can you show us your running config of both sides, so we can know where would be the problem? cheers, Heiman. ""Mr piyush shah"" wrote in message news:[EMAIL PROTECTED] > Dear all > I am having 128 kbps Leased Line with ISDN backup.As > the Link goes Down ,ISDN should trigger,however in my > case the ISDN link does not come up and goes to > deactivated mode.What could be the problem .I have > seen that upon removing the ISDN link and inserting > back it gives the status as ACTIVE.What could be the > problm? > Kindly help as I am not able to use backup link due to > this reason. > > I have attached herewitht the log of sh isdn status > command for your kind pwerusal > > Thanks in advance. > > Regards > > > Piyush > > router-1#sh ISDN status > > ISDN BRI0 interface > dsl 0, interface ISDN Switchtype = basic-net3 > Layer 1 Status: > DEACTIVATED > Layer 2 Status: > TEI = 85, Ces = 1, SAPI = 0, State = > TEI_ASSIGNED > I_Queue_Len 0, UI_Queue_Len 0 > Layer 3 Status: > 0 Active Layer 3 Call(s) > Activated dsl 0 CCBs = 0 > The Free Channel Mask: 0x8003 > Total Allocated ISDN CCBs = 0 > > > Send free SMS using the Yahoo! Messenger. Go to > http://in.mobile.yahoo.com/new/pc/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72028&t=72022 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ISDN case... [7:72017]
Hi Eric, Thanks for what you wrote... I want the BRI just for a back up... so the line should stay down all the time when every thing is normal. I want the BRI come up only once the serial go down " in this way we get small bill" :) how about the routing section ? did you had a look at? cheers, Heiman. ""ericbrouwers"" wrote in message news:[EMAIL PROTECTED] > This is normal behaviour: if you configure BRI as backup, it will go in > standby mode and line protocol goes down. You can avoid this by configuring > a dialer interface as backup. Then the dialer interface will go in standby > mode, but the BRI stays up!! This is preferred since: > 1. some Telco's will lock out your line when it is too long down; > 2. you can easily detect if your backup goes down. > This won't give any surprises when you really need the backup! > > So replace this: > interface s0 >backup interface bri0 > > By following: > interface s0 >backup interface dialer 1 > > interface dialer 1 >dialer pool 1 > > interface bri0 >dialer pool-member 1 > > In your case I would try something like this: > > interface s0 >ip address 172.20.14.1 255.255.255.252 >backup interface dialer 1 > > dialer-list 1 protocol ip permit > > interface dialer 1 >description Dialer to LDS >ip address 172.21.14.1 255.255.255.0 >encapsulation ppp >ppp authentication chap >ppp chap password 7 1307161100191426222A23 >dialer idle-timeout 750 >dialer map ip 172.21.14.2 name LDS 23225374 >dialer-group 1 >dialer pool 1 > > interface bri0 >isdn switch-type basic-net3 >encapsulation ppp >ppp authentication chap >ppp chap password 7 1307161100191426222A23 >dialer pool-member 1 > > Hope this helps, > > Eric Brouwers > > PS > Be careful about moving all statements below BRI interface to dialer > interface. This is what Cisco says about it: > > "...Commands that apply before authentication is complete must be configured > on the physical (BRI) interface and not on the dialer profile. Dialer > profiles do not copy PPP authentication commands (or LCP commands) to the > physical interface > .." > > I've never tried the most efficient configuration, that's why there is some > redundancy in the config above. Maybe someone else can comment about > removing the PPP encaps. and auth. commands from the dialer interface?? > > Cheers, > > Eric > > > - Original Message - > From: "H T" > To: > Sent: Tuesday, July 08, 2003 8:36 AM > Subject: ISDN case... [7:72017] > > > > Hi all, > > I have a problem with my ISDN back up link... the interface in STANDBY > mode. > > > > > > TBRS#sho inter bri0 > > BRI0 is standby mode, line protocol is down > > Hardware is PQUICC BRI > > Description: Dialer to Lovisenberg > > Internet address is 172.21.14.1/24 > > MTU 1500 bytes, BW 64 Kbit, DLY 2 usec, > > reliability 255/255, txload 1/255, rxload 1/255 > > Encapsulation PPP, loopback not set > > Last input never, output never, output hang never > > Last clearing of "show interface" counters 00:39:45 > > Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 > > Queueing strategy: weighted fair > > Output queue: 0/1000/64/0 (size/max total/threshold/drops) > > Conversations 0/0/16 (active/max active/max total) > > Reserved Conversations 0/0 (allocated/max allocated) > > Available Bandwidth 48 kilobits/sec > > 5 minute input rate 0 bits/sec, 0 packets/sec > > 5 minute output rate 0 bits/sec, 0 packets/sec > > 0 packets input, 0 bytes, 0 no buffer > > Received 0 broadcasts, 0 runts, 0 giants, 0 throttles > > 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort > > 0 packets output, 0 bytes, 0 underruns > > 0 output errors, 0 collisions, 0 interface resets > > 0 output buffer failures, 0 output buffers swapped out > > 0 carrier transitions > > > > > > and the configuration is > > > > hostname TBRS > > ! > > username LDS password 7 15100A0F0F3F3B28213D3E > > isdn switch-type basic-net3 > > ! > > interface BRI0 > > description Dialer to LDS > > ip address 172.21.14.1 255.255.255.0 > > encapsulation ppp > > dialer idle-timeout 750 > > dialer map ip 172.21.14.2 name LDS 23225374 > > dialer-group 1 > > isdn switch-type basic-net3 > > ppp authentication chap > > ppp chap password 7 1307161100191426222A23 > >
Re: ISDN case... [7:72017]
Hi, This is the detail configuration for both routers LDS# LDS#show run Building configuration... Current configuration : 2939 bytes ! version 12.2 service timestamps debug datetime msec localtime service timestamps log datetime msec localtime service password-encryption service compress-config ! hostname LDS ! boot system flash c3725-is-mz.122-15.T2.bin logging queue-limit 100 ! username TBRS password 7 104C081A0E020207050A21 clock timezone met 1 clock summer-time met recurring last Sun Mar 2:00 last Sun Oct 3:00 ip subnet-zero ! isdn switch-type basic-net3 ! no voice hpi capture buffer no voice hpi capture destination ! mta receive maximum-recipients 0 ! ! interface FastEthernet0/0 ip address 100.73.1.3 255.255.128.0 duplex auto speed auto ! interface Serial1/1 description Link to TBRS ip address 172.20.14.2 255.255.255.252 backup interface BRI2/3 serial restart_delay 0 ! ! interface BRI2/3 description Dialer to TBRS ip address 172.21.14.2 255.255.255.0 encapsulation ppp dialer idle-timeout 750 dialer map ip 172.21.14.1 name TBRS 022193533 dialer-group 1 isdn switch-type basic-net3 ppp authentication chap ppp chap password 7 0509070C2A595E05100B1C ! ! router eigrp 1 redistribute connected redistribute static passive-interface FastEthernet0/0 network 172.0.0.0 network 172.20.11.0 0.0.0.255 network 172.20.12.0 0.0.0.255 network 172.20.13.0 0.0.0.255 network 172.20.14.0 0.0.0.255 network 172.20.15.0 0.0.0.255 no auto-summary no eigrp log-neighbor-changes ! no ip http server ip classless ip route 0.0.0.0 0.0.0.0 100.73.1.1 ip route 172.20.10.0 255.255.255.0 172.20.11.1 ip route 172.20.20.0 255.255.255.0 172.20.12.1 ip route 172.20.30.0 255.255.255.0 172.20.13.1 ip route 172.20.40.0 255.255.255.0 172.20.14.1 ip route 172.20.50.0 255.255.255.0 172.20.15.1 ip route 172.21.14.0 255.255.255.0 172.21.14.1 200 ! dialer-list 1 protocol ip permit ! call rsvp-sync ! mgcp profile default ! dial-peer cor custom ! banner motd ^CCWarning: All unauthorized use will be reported! ^C ! line con 0 exec-timeout 0 0 line aux 0 line vty 0 4 password 7 15130F010D7338303A32212D01 login ! end LDS#show inter bri2/3 BRI2/3 is standby mode, line protocol is down Hardware is BRI Description: Dialer to TBRS Internet address is 172.21.14.2/24 MTU 1500 bytes, BW 64 Kbit, DLY 2 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation PPP, loopback not set Last input 03:41:47, output 03:41:47, output hang never Last clearing of "show interface" counters 01:48:55 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/1/16 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 48 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 0 packets output, 0 bytes, 0 underruns 0 output errors, 0 collisions, 0 interface resets 0 output buffer failures, 0 output buffers swapped out 0 carrier transitions LDS# LDS# The second router TBRS# TBRS#show run Building configuration... Current configuration : 1508 bytes ! version 12.2 service timestamps debug datetime msec localtime service timestamps log datetime msec localtime service password-encryption service compress-config ! hostname TBRS ! enable secret 5 $1$mgUK$3f83im5ZmyjmtPvmYmU331 enable password 7 110A1016141D ! username LDS password 7 15100A0F0F3F3B28213D3E clock timezone met 1 clock summer-time met recurring last Sun Mar 2:00 last Sun Oct 3:00 ip subnet-zero ! isdn switch-type basic-net3 ! ! ! interface BRI0 description Dialer to Lovisenberg ip address 172.21.14.1 255.255.255.0 encapsulation ppp dialer idle-timeout 750 dialer map ip 172.21.14.2 name LDS-R01 23225374 dialer-group 1 isdn switch-type basic-net3 ppp authentication chap ppp chap password 7 1307161100191426222A23 ! interface FastEthernet0 ip address 172.20.40.1 255.255.255.0 ip helper-address 100.73.120.16 speed auto no cdp enable ! interface Serial0 backup interface BRI0 ip address 172.20.14.1 255.255.255.252 no fair-queue ! router eigrp 1 redistribute connected redistribute static passive-interface FastEthernet0 network 172.0.0.0 no auto-summary no eigrp log-neighbor-changes ! ip classless ip route 0.0.0.0 0.0.0.0 172.20.14.2 ip route 0.0.0.0 0.0.0.0 172.21.14.2 200 no ip http server ! ! dialer-list 1 protocol ip permit dialer-list 1 protocol ipx permit banner motd ^CCWarning: All unauthorized use will be reported! ^C ! line con 0 exec-timeout 15 0 line aux 0 line vty 0 4 password 7 0005170B0D0218121D2058411B login ! no scheduler allocate end TBRS# TB
ISDN case... [7:72017]
Hi all, I have a problem with my ISDN back up link... the interface in STANDBY mode. TBRS#sho inter bri0 BRI0 is standby mode, line protocol is down Hardware is PQUICC BRI Description: Dialer to Lovisenberg Internet address is 172.21.14.1/24 MTU 1500 bytes, BW 64 Kbit, DLY 2 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation PPP, loopback not set Last input never, output never, output hang never Last clearing of "show interface" counters 00:39:45 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/0/16 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 48 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 0 packets output, 0 bytes, 0 underruns 0 output errors, 0 collisions, 0 interface resets 0 output buffer failures, 0 output buffers swapped out 0 carrier transitions and the configuration is hostname TBRS ! username LDS password 7 15100A0F0F3F3B28213D3E isdn switch-type basic-net3 ! interface BRI0 description Dialer to LDS ip address 172.21.14.1 255.255.255.0 encapsulation ppp dialer idle-timeout 750 dialer map ip 172.21.14.2 name LDS 23225374 dialer-group 1 isdn switch-type basic-net3 ppp authentication chap ppp chap password 7 1307161100191426222A23 ! interface FastEthernet0 ip address 172.20.40.1 255.255.255.0 ip helper-address 100.73.120.16 speed auto no cdp enable ! interface Serial0 backup interface BRI0 ip address 172.20.14.1 255.255.255.252 no fair-queue ! router eigrp 1 redistribute connected redistribute static passive-interface FastEthernet0 network 172.0.0.0 no auto-summary no eigrp log-neighbor-changes ! ip classless ip route 0.0.0.0 0.0.0.0 172.20.14.2 ip route 0.0.0.0 0.0.0.0 172.21.14.2 200 no ip http server ! dialer-list 1 protocol ip permit The other side is configred in the same way. Cheers Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72017&t=72017 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
chat script ... modem [7:71947]
Hi all, Can any one help about Chat script configuring. It will be very nice if we get some diagrams for the detailed configurations. how about this topic for the lab? Is there any one have experienced it? cheers, Heiman. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=71947&t=71947 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCIE Lab !!! [7:71919]
Hi, Actually Cisco just says the following topics are removed, but there is not details http://www.cisco.com/warp/public/625/ccie/certifications/routing.html ISO CLNS... does it include ISIS ??? Token Ring and Token Ring Switching... does it includes all IBM networking??? 1. SRB 2. SR/TLB 3. RSRB 4. DLSw and DLSw+ 5. Encapsulation bridging 6. CRB 7. IRB How about ATM, what will be included? Can any one fine out Cheers, Heiman. ""Hemingway"" wrote in message news:[EMAIL PROTECTED] > anyone who is serious about CCIE lab prep should become familiar with this > site: > > http://www.cisco.com/warp/public/625/ccie/ > > start your reading here. everything yoiu need to know can be found somewhere > within the links provided. > > > ""H T"" wrote in message > news:[EMAIL PROTECTED] > > Hi all, > > Can any one help us about the lab topics? > > > > > > Cheers, > > Heiman. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=71934&t=71919 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCIE Lab !!! [7:71919]
Hi all, Can any one help us about the lab topics? Cheers, Heiman. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=71919&t=71919 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
