assign (static) IP address to VPN client [7:43329]
I am using a VPN Concentrator 3000 - and locally address pools . The clients gets assigned an IP address out of that pool. But I`d like to give it a preconfigured address . So I tried : USER MANAGEMENT - USERS - there I put in the IP address I4d like the client should get ! But it gets an address out of that pool - at random ! Does anyone have an idea ? thx in advance Hans Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=43329t=43329 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Dialer Profiles - IPCP doesn`t come up ! [7:26232]
I am trying to implement a dial-up connection to a remote site ( Cisco2611 dials to Cisco 801). I am using Dialer Profiles with CHAP Authentication. The config seems to be OK - the router is dialing - authentication is successful - and the line changes to UP. except the IPCP-State - which won`t come UP.. =20 Thx hans =20 - DI(FH) Hans Schimek Systems Engineer=20 NTS Netzwerk Telekom Service Gesellschaft m.b.H Co KG Lemb=F6ckgasse 49/1/B A-1230 Wien Tel: +43 1 867 67 76 - 13 , Fax: +43 1 867 67 76 - 56 Web: , =20 -=20 NTS Vertrieb: [EMAIL PROTECTED]=20 NTS Support:[EMAIL PROTECTED]=20 NTS Training: [EMAIL PROTECTED]=20 -=20 =20 Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=26232t=26232 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco PIX Websense (Accounting) ? [7:21850]
We are using a combination of Cisco PIX and Websense Devices. What we want to achieve is, getting accounting informations out of this websense application. There is a section called Bytes Transfered - which acctually remains 0 - although the URLs are filtered and logged in the reporter.. Is there a possibility to get this informations out of the Cisco PIX ? resp.- Does this device provide any interface-statistics per connection. ( like : bytes transfered from an IP Adress or User ? thx hans --- Hans Schimek Systems Engineer NTS Netzwerk Telekom Service Gesellschaft m.b.H Co KG Lembvckgasse 49 1230 Wien Tel: +43/1/867 67 76-0, Fax: +43/1/867 67 76-56 Web: , [EMAIL PROTECTED] NTS Vertrieb: [EMAIL PROTECTED] NTS Support: [EMAIL PROTECTED] NTS Training: [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=21850t=21850 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
configuring PIX devices [7:20379]
Hi! Does anyone have some CBT-software or good links for starting configuring Cisco PIX devices ? I would appreciate any help! thanx hans Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=20379t=20379 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
configuring PIX devices [7:20440]
Hi! Does anyone have some CBT-software or good links for starting configuring Cisco PIX devices ? I would appreciate any help! thanx hans Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=20440t=20440 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
xDSL Books ?
Can anyone recommend any good books on xDSL ? thx hans _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
SNMP-queries ???
i would like to configure SNMP on our network. but reduce network traffic for snmp queries as far as possible. i did this on a testrouter so far. but debugging snmp packets - i noticed that every 2 seconds a query is sent - i attached an extract of the log-file. our network now has about 40-50 routers - so if i will enable snmp on all of these devices - that would result in a heavy network load, isn`t it- but so far - we do need such a strictly network mangagement- for now we do polling every 40 minutes - but when there is an outage on one of those devices, the customer notices it prior to our NOC. so i configured snmp traps - which works fine - in an acceptable time - but THAT didn`t reduce my snmp queries floods, either. so please could anyone give me an advice, how i could reduce these snmp queries. thanx hans 4w4d: SNMP: Get request, reqid 98419, errstat 0, erridx 0 sysUpTime.0 = NULL TYPE/VALUE ifEntry.5.3 = NULL TYPE/VALUE sysUpTime.0 = NULL TYPE/VALUE ifEntry.10.3 = NULL TYPE/VALUE ifEntry.11.3 = NULL TYPE/VALUE 4w4d: SNMP: Response, reqid 98419, errstat 2, erridx 4 sysUpTime.0 = NULL TYPE/VALUE ifEntry.5.3 = NULL TYPE/VALUE sysUpTime.0 = NULL TYPE/VALUE ifEntry.10.3 = NULL TYPE/VALUE ifEntry.11.3 = NULL TYPE/VALUE 4w4d: SNMP: Packet sent via UDP to 213.164.0.54 4w4d: SNMP: Packet received via UDP from 213.164.0.54 on Serial0/0:0 4w4d: SNMP: Get request, reqid 426099, errstat 0, erridx 0 ifEntry.12.3 = NULL TYPE/VALUE ifEntry.13.3 = NULL TYPE/VALUE ifEntry.14.3 = NULL TYPE/VALUE ifEntry.15.3 = NULL TYPE/VALUE 4w4d: SNMP: Response, reqid 426099, errstat 2, erridx 1 ifEntry.12.3 = NULL TYPE/VALUE ifEntry.13.3 = NULL TYPE/VALUE ifEntry.14.3 = NULL TYPE/VALUE ifEntry.15.3 = NULL TYPE/VALUE 4w4d: SNMP: Packet sent via UDP to 213.164.0.54 4w4d: SNMP: Packet received via UDP from 213.164.0.54 on Serial0/0:0 4w4d: SNMP: Get request, reqid 98419, errstat 0, erridx 0 sysUpTime.0 = NULL TYPE/VALUE ifEntry.5.3 = NULL TYPE/VALUE sysUpTime.0 = NULL TYPE/VALUE ifEntry.11.3 = NULL TYPE/VALUE 4w4d: SNMP: Response, reqid 98419, errstat 2, erridx 4 sysUpTime.0 = NULL TYPE/VALUE ifEntry.5.3 = NULL TYPE/VALUE sysUpTime.0 = NULL TYPE/VALUE ifEntry.11.3 = NULL TYPE/VALUE 4w4d: SNMP: Packet sent via UDP to 213.164.0.54 4w4d: SNMP: Packet received via UDP from 213.164.0.54 on Serial0/0:0 4w4d: SNMP: Get request, reqid 491635, errstat 0, erridx 0 ifEntry.13.3 = NULL TYPE/VALUE ifEntry.14.3 = NULL TYPE/VALUE ifEntry.15.3 = NULL TYPE/VALUE 4w4d: SNMP: Response, reqid 491635, errstat 2, erridx 1 ifEntry.13.3 = NULL TYPE/VALUE ifEntry.14.3 = NULL TYPE/VALUE ifEntry.15.3 = NULL TYPE/VALUE 4w4d: SNMP: Packet sent via UDP to 213.164.0.54 4w4d: SNMP: Packet received via UDP from 213.164.0.54 on Serial0/0:0 4w4d: SNMP: Get request, reqid 98419, errstat 0, erridx 0 sysUpTime.0 = NULL TYPE/VALUE ifEntry.5.3 = NULL TYPE/VALUE sysUpTime.0 = NULL TYPE/VALUE 4w4d: SNMP: Response, reqid 98419, errstat 0, erridx 0 sysUpTime.0 = 284539442 ifEntry.5.3 = 2048000 sysUpTime.0 = 284539442 4w4d: SNMP: Packet sent via UDP to 213.164.0.54 4w4d: SNMP: Packet received via UDP from 213.164.0.54 on Serial0/0:0 4w4d: SNMP: Get request, reqid 557171, errstat 0, erridx 0 ifEntry.14.3 = NULL TYPE/VALUE ifEntry.15.3 = NULL TYPE/VALUE 4w4d: SNMP: Response, reqid 557171, errstat 2, erridx 1 ifEntry.14.3 = NULL TYPE/VALUE ifEntry.15.3 = NULL TYPE/VALUE 4w4d: SNMP: Packet sent via UDP to 213.164.0.54 4w4d: SNMP: Packet received via UDP from 213.164.0.54 on Serial0/0:0 4w4d: SNMP: Get request, reqid 622707, errstat 0, erridx 0 ifEntry.15.3 = NULL TYPE/VALUE 4w4d: SNMP: Response, reqid 622707, errstat 2, erridx 1 ifEntry.15.3 = NULL TYPE/VALUE 4w4d: SNMP: Packet sent via UDP to 213.164.0.54 4w4d: SNMP: Packet received via UDP from 213.164.0.54 on Serial0/0:0 4w4d: SNMP: Get request, reqid 98420, errstat 0, erridx 0 sysUpTime.0 = NULL TYPE/VALUE ifEntry.5.3 = NULL TYPE/VALUE sysUpTime.0 = NULL TYPE/VALUE ifEntry.10.3 = NULL TYPE/VALUE ifEntry.11.3 = NULL TYPE/VALUE 4w4d: SNMP: Response, reqid 98420, errstat 2, erridx 4 sysUpTime.0 = NULL TYPE/VALUE ifEntry.5.3 = NULL TYPE/VALUE sysUpTime.0 = NULL TYPE/VALUE ifEntry.10.3 = NULL TYPE/VALUE ifEntry.11.3 = NULL TYPE/VALUE 4w4d: SNMP: Packet sent via UDP to 213.164.0.54 4w4d: SNMP: Packet received via UDP from 213.164.0.54 on Serial0/0:0 4w4d: SNMP: Get request, reqid 426100, errstat 0, erridx 0 ifEntry.12.3 = NULL TYPE/VALUE ifEntry.13.3 = NULL TYPE/VALUE ifEntry.14.3 = NULL TYPE/VALUE ifEntry.15.3 = NULL TYPE/VALUE 4w4d: SNMP: Response, reqid 426100, errstat 2, erridx 1 ifEntry.12.3 = NULL TYPE/VALUE ifEntry.13.3 = NULL TYPE/VALUE ifEntry.14.3 = NULL TYPE/VALUE ifEntry.15.3 = NULL TYPE/VALUE 4w4d: SNMP: Packet sent via UDP to 213.164.0.54 4w4d: SNMP: Packet received via UDP from 213.164.0.54 on Serial0/0:0 4w4d: SNMP: Get request, reqid 98420, errstat 0, erridx 0 sysUpTime.0 = NULL TYPE/VALUE ifEntry.5.3 = NULL TYPE/VALUE sysUpTime.0 = NULL
Cisco Netacademy ?
i am a regular user of the cisco netacad program - i am allowed to enter the CCNA program but for now i am not allowed to enter the CCNP program anymore - the regional academy where i am studying does not have the CCNP license so far. i am nearly finished with the CCNP program . until yesterday i used this netacad-curriculum - but today i am not allowed anymore. does anyone have a password and username for that site. just to complete my ccnp certification thanx in advance hans _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Backup Interface and Routing!
Hi! i configured a serial link and an ISDN link between two routers. the serial line is the primary line. if it fails the backup line ISDN-Interface) takes over. i configured RIP - To prevent Routing Updates from establishing the call i set the ISDN-Interface as PASSIVE. Updates didn`t initate the call anymore. BUT ! what about the routing information. if the primary fails, no routing updates won`t flow. so i configured static routes with a higher administrative distance - IS THERE ANOTHER SOLUTION FOR THAT PROBLEM ! thanx in advance = Hans Schimek Student Fachhochschule St. Pölten f. Telekommunikation und Medien mailto: [EMAIL PROTECTED] gsm : +43 699 10605315 fax : +43 3613 2311 4 icq : 22308773 www : www.schimek.net = _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ISDN call disconnects automatically !
ISDN calls get disconncted after some time - though traffic is flowing - and the interface is NOT idle - so it should not be disconncted - or is there a timer which disconnects all calls after a while ? thanx in advance 00:42:199726942860: ISDN BR1/0: received HOST_DISCONNECT call_id 0x8012 00:42:197568495616: ISDN BR1/0: Event: Call to unknown was hung up. 00:42:199726942732: ISDN BR1/0: process_disc_ack(): call id 0x8012, ces 1, call type DATA 00:42:197568495663: %ISDN-6-DISCONNECT: Interface BRI1/0:1 disconnected from 20 2504, call lasted 120 seconds 00:42:199726942540: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to down 00:42:199724968501: ISDN BR1/0: received HOST_DISCONNECT_ACK call_id 0x8012 00:42:197568495616: ISDN BR1/0: HOST_DISCONNECT_ACK: call type is DATA 00:42:47: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI1/0:1, changed stat e to down 00:42:47: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, chang ed state to down = Hans Schimek Student Fachhochschule St. Pölten f. Telekommunikation und Medien mailto: [EMAIL PROTECTED] gsm : +43 699 10605315 fax : +43 3613 2311 4 icq : 22308773 www : www.schimek.net = _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
No Subject
i previously wrote about my problem concerning IDSN calls which got disconnected automatically. the reason why i would need this connection is - my cisco 2504 does not boot with the 2 serial interfaces which are on it. only with the BRI and TokenRing Interface. that`s -because i did a software update ! now i would like to download the old image from a tftp-server. i need about 6 MB but the call disconnects after about 4 MB. can anyone give me an advice ? ( i do not have a token ring device !!) = Hans Schimek Student Fachhochschule St. Pölten f. Telekommunikation und Medien mailto: [EMAIL PROTECTED] gsm : +43 699 10605315 fax : +43 3613 2311 4 icq : 22308773 www : www.schimek.net = _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ISDN calls gets connected but disconnects immediately
hi! i am simulating an isdn call on an isdn switch with 2 S0 interfaces. i am trying to configure DDR . as i am trying to ping the remote router ( 192.168.0.1 ) the call gets initiated but gets disconnected immediately. i included the output of the isdn q931 command and my running config. any advice ? thanx in advance = Hans Schimek Student Fachhochschule St. Pölten f. Telekommunikation und Medien mailto: [EMAIL PROTECTED] gsm : +43 699 10605315 fax : +43 3613 2311 4 icq : 22308773 www : www.schimek.net = 00:21:24: Calling Party Number i = 'A', 0x83, '20' 00:21:24: Called Party Number i = 0xC1, '20' 00:21:24: ISDN BR0: Event: Received a DATA call from 20 on B2 at 64 Kb/s 00:21:24: ISDN BR0: Event: Accepting the call id 0x26 00:21:24: %LINK-3-UPDOWN: Interface BRI0:2, changed state to up 00:21:24: ISDN BR0: TX - CONNECT pd = 8 callref = 0xC2 00:21:24: ISDN BR0: RX - CONNECT_ACK pd = 8 callref = 0x42 00:21:24: Channel ID i = 0x8A 00:21:24: ISDN BR0: RX - CONNECT pd = 8 callref = 0xA6 00:21:24: Channel ID i = 0x89 00:21:24: Connected Number i = 0x41813230 00:21:24: ISDN BR0: TX - CONNECT_ACK pd = 8 callref = 0x26 00:21:24: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up 00:21:24: ISDN BR0: TX - DISCONNECT pd = 8 callref = 0x26 00:21:24: Cause i = 0x8090 - Normal call clearing 00:21:24: ISDN BR0: TX - DISCONNECT pd = 8 callref = 0xC2 00:21:24: Cause i = 0x8090 - Normal call clearing 00:21:24: ISDN BR0: RX - DISCONNECT pd = 8 callref = 0x42 00:21:24: Cause i = 0x8090 - Normal call clearing 00:21:24: ISDN BR0: TX - RELEASE pd = 8 callref = 0xC2 00:21:24: ISDN BR0: RX - RELEASE pd = 8 callref = 0xA6 00:21:24: Cause i = 0x819F - Normal, unspecified or Special intercept, c all blocked group restriction 00:21:24: ISDN BR0: TX - RELEASE_COMP pd = 8 callref = 0x26 00:21:24: ISDN BR0: Ux_BadMsg(): Invalid Message for call state 0, call id 0x802 6, call ref 0x0 00:21:24: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down 00:21:24: ISDN BR0: RX - RELEASE pd = 8 callref = 0x42 00:21:24: %LINK-3-UPDOWN: Interface BRI0:2, changed state to down 00:21:24: ISDN BR0: Ux_BadMsg(): Invalid Message for call state 0, call id 0x26, call ref 0x0 00:21:26: ISDN BR0: TX - SETUP pd = 8 callref = 0x27 00:21:26: Bearer Capability i = 0x8890 00:21:26: Channel ID i = 0x83 00:21:26: Called Party Number i = 0x80, '20' 00:21:26: ISDN BR0: RX - CALL_PROC pd = 8 callref = 0xA7 00:21:26: Channel ID i = 0x89 00:21:26: ISDN BR0: RX - SETUP pd = 8 callref = 0x41 00:21:26: Sending Complete 00:21:26: Bearer Capability i = 0x8890 00:21:26: Channel ID i = 0x8A 00:21:26: Calling Party Number i = 'A', 0x83, '20' 00:21:26: Called Party Number i = 0xC1, '20' 00:21:26: ISDN BR0: Event: Received a DATA call from 20 on B2 at 64 Kb/s 00:21:26: ISDN BR0: Event: Accepting the call id 0x27 00:21:26: %LINK-3-UPDOWN: Interface BRI0:2, changed state to up 00:21:26: ISDN BR0: TX - CONNECT pd = 8 callref = 0xC1 00:21:26: ISDN BR0: RX - CONNECT_ACK pd = 8 callref = 0x41 00:21:26: Channel ID i = 0x8A 00:21:26: ISDN BR0: RX - CONNECT pd = 8 callref = 0xA7 00:21:26: Channel ID i = 0x89 00:21:26: Connected Number i = 0x41813230 00:21:26: ISDN BR0: TX - CONNECT_ACK pd = 8 callref = 0x27 00:21:26: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up 00:21:26: ISDN BR0: TX - DISCONNECT pd = 8 callref = 0x27 00:21:26: Cause i = 0x8090 - Normal call clearing 00:21:26: ISDN BR0: TX - DISCONNECT pd = 8 callref = 0xC1 00:21:26: Cause i = 0x8090 - Normal call clearing 00:21:26: ISDN BR0: RX - DISCONNECT pd = 8 callref = 0x41 00:21:26: Cause i = 0x8090 - Normal call clearing 00:21:26: ISDN BR0: TX - RELEASE pd = 8 callref = 0xC1 00:21:26: ISDN BR0: RX - RELEASE pd = 8 callref = 0xA7 00:21:26: Cause i = 0x819F - Normal, unspecified or Special intercept, c all blocked group restriction 00:21:26: ISDN BR0: TX - RELEASE_COMP pd = 8 callref = 0x27 00:21:26: ISDN BR0: Ux_BadMsg(): Invalid Message for call state 0, call id 0x802 7, call ref 0x0 00:21:26: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down 00:21:26: ISDN BR0: RX - RELEASE pd = 8 callref = 0x41 00:21:26: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down 00:21:26: ISDN BR0: RX - RELEASE pd = 8 callref = 0x41 00:21:26: %LINK-3-UPDOWN: Interface BRI0:2, changed state to down 00:21:26: ISDN BR0: Ux_BadMsg(): Invalid Message for call state 0, call id 0x27, call ref 0x0 urrent configuration: ! version 12.0 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname branch ! ! ip subnet-zero ! isdn switch-type basic-net3 partition flash 2 8 8 ! ! ! ! interface TokenRing0 no ip address no ip directed-broadcast ! interface BRI0
pins for - token ring respectively serial cable
Hi! i got a cisco 2504 with a token ring port on it. this is a db9-connector. i would like to connect two 2504 back-to-back. can anyone tell me which pins i have to use on the db9-connector.(both ends-please ) .. and another question. a simple serial cable ( for connecting pc and modem - DB9 to DB9 ) i would need the pins, too thanx in advance hans = Hans Schimek Student Fachhochschule St. Pölten f. Telekommunikation und Medien mailto: [EMAIL PROTECTED] gsm : +43 699 10605315 fax : +43 3613 2311 4 icq : 22308773 www : www.schimek.net = _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
No Subject
Hi! i got a cisco 2504 with a token ring port on it. this is a db9-connector. i would like to connect two 2504 back-to-back. can anyone tell me which pins i have to use on the db9-connector.(both ends-please ) .. and another question. a simple serial cable ( for connecting pc and modem - DB9 to DB9 ) i would need the pins, too thanx in advance hans = Hans Schimek Student Fachhochschule St. Pölten f. Telekommunikation und Medien mailto: [EMAIL PROTECTED] gsm : +43 699 10605315 fax : +43 3613 2311 4 icq : 22308773 www : www.schimek.net = _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
No Subject
Hallo! Suche dringend Router ( 2500 Serie - 2503 bzw. 2600 mit BRI ) BITTE meldet euch . danke = Hans Schimek Student Fachhochschule St. Pölten f. Telekommunikation und Medien mailto: [EMAIL PROTECTED] gsm : +43 699 10605315 fax : +43 3613 2311 4 icq : 22308773 www : www.schimek.net = **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Router für Testlabor gesucht !
Hallo! Suche dringend Router ( 2500 Serie - 2503 bzw. 2600 mit BRI ) BITTE meldet euch . danke = Hans Schimek Student Fachhochschule St. Pölten f. Telekommunikation und Medien mailto: [EMAIL PROTECTED] gsm : +43 699 10605315 fax : +43 3613 2311 4 icq : 22308773 www : www.schimek.net = **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
modem on aux
if i would like to connect a modem ( elsa microlink 33.6 ) to the aux port which cables to i have to use ? aux (RJ45) --straight RJ45 cable DB25Connector(DB25-DB9 Converter)-:Modem is that right ? thanx hans and reverse telnet to port 2001 ? isn`t it ? **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ISDN- Invalid number format or Special Intercept
Hi! at the moment i am simulating isdn-circuits with two cisco 2600 and an isdn-pbx. the router is dialing - i get back a SETUP_ACK but get disconnected some time later. Cause: DISCONNECT Cause i = 0x819C - Invald Number format or Special Intercept ? All interfaces are up ! Layer 1 Status: ACTIVE Layer 2 Status: TEI=64, Ces = 1 SAPI = 0 , State = Multiple_Frame_Esablished Layer 3 Status : 0 Active Calls Did i configure the PBX incorrectely ? do i need ISDN SPIDs for isdn-switch type basic-ni ? i would appriciate any help ! thanx in advance hans **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
E1 back-to-back ?
Hi! for testing purposes i would like to connect E1 interfaces back-to-back. i am using cross-over cables ( pin 1,2 - 4,5 ). can anyone tell me how to achieve getting up the link. for up-to-now the link only comes up if i loop the entire E1 interface. would be great if anybody could tell me how i can do this respectively which commands i have to use. thanx in advance hans **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Configuring Catalyst 1200 ?
i got a catalyst 1200 . it cannot be configured via the db-9 to RJ45 cable. the documentation says that i have to use the db25 to RJ45 cable. but i do not have a second COM Port with an RS232 interface. any advice ? thanx hans **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Whitepaper BGP Part One ?
Hi ! does anybody have the whitepaper BGP Part ONE ? thanx hans ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Labs from Mentorlabs - Exchange ?
Hi ! In the near future we will buy some vlabs from mentorlabs ! as those labs a pretty expensive we will perhaps only afford 5 of those. MY QUESTION: if any of you already has some of those labs - perhaps we could exchange them ???- would be great if some of you could help us ! thanx in advance hans === Hans Schimek Student Fachhochschule St. Pölten f. Telekommunikation und Medien mailto: [EMAIL PROTECTED] gsm : +43 676 / 6798257 gsm : +43 699 / 10227980 icq : 22308773 fax : +43 3613 / 23114 www : www.schimek.net ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
No Subject
does anybody know if there are some good books about labs, troubleshooting and various topics available. i looked at mentorlabs - but 65$ for just one lab if pretty taff ! would be great if you have any suggestions ! thanx hans === Hans Schimek Student Fachhochschule St. Pölten f. Telekommunikation und Medien mailto: [EMAIL PROTECTED] gsm : +43 676 / 3758918 gsm : +43 699 / 10227980 icq : 22308773 fax : +43 3613 / 23114 www : www.schimek.net ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
