What am I missing? HELP [7:75265]
All- I have a CBOS IOS on a CISCO Router ( 600 series). I am trying to make this router a filter router. When I implement the rules below, nothing comes across. I have checked the documentation, but still can't find the solution. Does anybody have any ideas? Your help is well appreciated.. set filter 0 on allow incoming eth0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol tcp set filter 1 on allow incoming eth0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol udp set filter 2 on allow incoming eth0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol icmp set filter 3 on allow outgoing all 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol tcp set filter 4 on allow outgoing all 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol icmp set filter 5 on allow outgoing all 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol udp set filter 6 on allow incoming wan0-0 192.18.42.16 255.255.255.0 0.0.0.0 0.0.0.0 protocol tcp srcport 1024-65535 destport 23 set filter 7 on allow incoming wan0-0 192.18.42.16 255.255.255.0 0.0.0.0 0.0.0.0 protocol tcp srcport 1024-65535 destport 20 set filter 8 on allow incoming wan0-0 192.18.42.16 255.255.255.0 0.0.0.0 0.0.0.0 protocol icmp set filter 9 on allow incoming wan0-0 192.18.42.17 255.255.255.0 0.0.0.0 0.0.0.0 protocol tcp srcport 1024-65535 destport 23 set filter 10 on allow incoming wan0-0 192.18.42.17 255.255.255.0 0.0.0.0 0.0.0.0 protocol tcp srcport 1024-65535 destport 20 set filter 11 on allow incoming wan0-0 192.18.42.17 255.255.255.0 0.0.0.0 0.0.0.0 protocol icmp SRS Level 2 SRS Implementation Team Cell phone# 720-840-4887 SUN PH# 303-272-2661 Virtual Office# 303-604-0037 [EMAIL PROTECTED] [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=75265t=75265 -- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
What am I missing? HELP [7:74803]
All- I have a CBOS IOS on a CISCO Router ( 600 series). I am trying to make this router a filter router. When I implement the rules below, nothing comes across. I have checked the documentation, but still can't find the solution. Does anybody have any ideas? Your help is well appreciated.. set filter 0 on allow incoming eth0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol tcp set filter 1 on allow incoming eth0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol udp set filter 2 on allow incoming eth0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol icmp set filter 3 on allow outgoing all 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol tcp set filter 4 on allow outgoing all 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol icmp set filter 5 on allow outgoing all 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol udp set filter 6 on allow incoming wan0-0 192.18.42.16 255.255.255.0 0.0.0.0 0.0.0.0 protocol tcp srcport 1024-65535 destport 23 set filter 7 on allow incoming wan0-0 192.18.42.16 255.255.255.0 0.0.0.0 0.0.0.0 protocol tcp srcport 1024-65535 destport 20 set filter 8 on allow incoming wan0-0 192.18.42.16 255.255.255.0 0.0.0.0 0.0.0.0 protocol icmp set filter 9 on allow incoming wan0-0 192.18.42.17 255.255.255.0 0.0.0.0 0.0.0.0 protocol tcp srcport 1024-65535 destport 23 set filter 10 on allow incoming wan0-0 192.18.42.17 255.255.255.0 0.0.0.0 0.0.0.0 protocol tcp srcport 1024-65535 destport 20 set filter 11 on allow incoming wan0-0 192.18.42.17 255.255.255.0 0.0.0.0 0.0.0.0 protocol icmp SRS Level 2 SRS Implementation Team Cell phone# 720-840-4887 SUN PH# 303-272-2661 Virtual Office# 303-604-0037 [EMAIL PROTECTED] [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=74803t=74803 -- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
What am I missing? [7:74504]
ALL- I have a CBOS router and trying to set it up as a filter router. When I inputthis rule base nothing works? Does anybody have any suggestions? Thanks set filter 0 on allow incoming eth0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol tcp set filter 1 on allow incoming eth0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol udp set filter 2 on allow incoming eth0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol icmp set filter 3 on allow outgoing all 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol tcp set filter 4 on allow outgoing all 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol icmp set filter 5 on allow outgoing all 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol udp set filter 6 on allow incoming wan0-0 192.18.42.16 255.255.255.0 0.0.0.0 0.0.0.0 protocol tcp srcport 1024-65535 destport 23 set filter 7 on allow incoming wan0-0 192.18.42.16 255.255.255.0 0.0.0.0 0.0.0.0 protocol tcp srcport 1024-65535 destport 20 set filter 8 on allow incoming wan0-0 192.18.42.16 255.255.255.0 0.0.0.0 0.0.0.0 protocol icmp set filter 9 on allow incoming wan0-0 192.18.42.17 255.255.255.0 0.0.0.0 0.0.0.0 protocol tcp srcport 1024-65535 destport 23 set filter 10 on allow incoming wan0-0 192.18.42.17 255.255.255.0 0.0.0.0 0.0.0.0 protocol tcp srcport 1024-65535 destport 20 set filter 11 on allow incoming wan0-0 192.18.42.17 255.255.255.0 0.0.0.0 0.0.0.0 protocol icmp **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=74504t=74504 -- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
What am I missing? [7:74441]
ALL- I have a CBOS router and trying to set it up as a filter router. When I inputthis rule base nothing works? Thanks set filter 0 on allow incoming eth0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol tcp set filter 1 on allow incoming eth0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol udp set filter 2 on allow incoming eth0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol icmp set filter 3 on allow outgoing all 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol tcp set filter 4 on allow outgoing all 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol icmp set filter 5 on allow outgoing all 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol udp set filter 6 on allow incoming wan0-0 192.18.42.16 255.255.255.0 0.0.0.0 0.0.0.0 protocol tcp srcport 1024-65535 destport 23 set filter 7 on allow incoming wan0-0 192.18.42.16 255.255.255.0 0.0.0.0 0.0.0.0 protocol tcp srcport 1024-65535 destport 20 set filter 8 on allow incoming wan0-0 192.18.42.16 255.255.255.0 0.0.0.0 0.0.0.0 protocol icmp set filter 9 on allow incoming wan0-0 192.18.42.17 255.255.255.0 0.0.0.0 0.0.0.0 protocol tcp srcport 1024-65535 destport 23 set filter 10 on allow incoming wan0-0 192.18.42.17 255.255.255.0 0.0.0.0 0.0.0.0 protocol tcp srcport 1024-65535 destport 20 set filter 11 on allow incoming wan0-0 192.18.42.17 255.255.255.0 0.0.0.0 0.0.0.0 protocol icmp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=74441t=74441 -- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
RE: Access-list ?? [7:71696]
Thank you I will try this and see if it works.. SRS Level 2 SRS Implementation Team Cell phone# 720-840-4887 SUN PH# 303-272-2661 Virtual Office# 303-604-0037 [EMAIL PROTECTED] [EMAIL PROTECTED] -Original Message- From: Kam Chris [mailto:[EMAIL PROTECTED] Sent: Wednesday, July 02, 2003 12:01 PM To: [EMAIL PROTECTED] Subject: RE: Access-list ?? [7:71696] Craig, The problem as I see it is you need to allow 50 hosts, to pass through an ACL but the 50 hosts you want to pass are difficult to mask out with a simple ACL. The previous answers provided might be correct but are a little more than I believe you are looking for. You are not trying to filter on source AND destination address and do not need to filter by protocol, just source, so I recomend a standard access-list, like I have listed below. There are several ways to slice it up here is just one. access-list 10 deny host 192.100.34.97 access-list 10 deny host 192.100.34.98 access-list 10 deny host 192.100.34.99 access-list 10 deny host 192.100.34.151 access-list 10 deny host 192.100.34.152 access-list 10 deny 192.100.34.153 0.0.0.7 access-list 10 permit 192.100.34.97 0.0.0.31 access-list 10 permit host 192.100.34.127 access-list 10 permit host 192.100.34.128 access-list 10 permit 192.100.34.129 0.0.0.31 If it's an option, you might want to consider re-addressing to better align your host addresses with a subnet boundary. For example, 192.100.34.65 0.0.0.63 covers hosts 65-126 (62 hosts) Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=71794t=71696 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Access-list ?? [7:71696]
ALL- I know you have answered this question before, but I hope somewhere in your 4th of July heart you can help me. I have a 1600 router running a 12021 IP PLUS --- I have tried to add access-lists to block all sites incoming except 192.100.34.100-150. Can someone help with the correct lists. Thanks in advance SRS Level 2 SRS Implementation Team Cell phone# 720-840-4887 SUN PH# 303-272-2661 Virtual Office# 303-604-0037 [EMAIL PROTECTED] [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=71696t=71696 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Access-list ?? [7:71684]
ALL- I know you have answered this question before, but I hope somewhere in your 4th of July heart you can help me. I have a 1600 router running a 12021 IP PLUS --- I have tried to add access-lists to block all sites incoming except 192.100.34.100-150. Can someone help with the correct lists. Thanks in advance SRS Level 2 SRS Implementation Team Cell phone# 720-840-4887 SUN PH# 303-272-2661 Virtual Office# 303-604-0037 [EMAIL PROTECTED] [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=71684t=71684 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Access-list ?? [7:71665]
ALL- I know you have answered this question before, but I hope somewhere in your 4th of July heart you can help me. I have a 1600 router running a 12021 IP PLUS --- I have tried to add access-lists to block all sites incoming except 192.100.34.100-150. Can someone help with the correct lists. Thanks in advance SRS Level 2 SRS Implementation Team Cell phone# 720-840-4887 SUN PH# 303-272-2661 Virtual Office# 303-604-0037 [EMAIL PROTECTED] [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=71665t=71665 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Dynamic Natting with a CISCO 1601R [7:64757]
Scott - I already have 8 mb of memory. What about the IOS or the config? Should IP PLUS handle Dynamic or Static natting? SRS Implementation Team SRS Tier 2 Pager# 1-888-860-5913 Virtual Office# 303-604-0037 SUN Office# 303-272-2661 -Original Message- From: Scott Roberts [mailto:[EMAIL PROTECTED] Sent: Friday, March 07, 2003 1:30 PM To: [EMAIL PROTECTED] Subject: Re: Dynamic Natting with a CISCO 1601R [7:64757] try putting more memory in, the max i think is 24, but default is like 12. ios 12.0 requires 8MB, so you're only really working with 4MB. scott Hyman, Craig wrote in message news:[EMAIL PROTECTED] ALL- I am having a problem with Dynamic Natting using a 1601R router over Frame Relay. Every time I set it up to use over 60 addresses the router hangs or reboots. I am using IOS 120221a IP PLUS I am being told by CISCO that this IOS is not specifically used for any form of natting. What do I do if I need to use Dynamic or PAT NAT Mapping? Any help would be well appreciated? Thanks in Advance SRS Implementation Team SRS Tier 2 Pager# 1-888-860-5913 Virtual Office# 303-604-0037 SUN Office# 303-272-2661 Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=64862t=64757 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Dynamic Natting with a CISCO 1601R [7:64757]
ALL- I am having a problem with Dynamic Natting using a 1601R router over Frame Relay. Every time I set it up to use over 60 addresses the router hangs or reboots. I am using IOS 120221a IP PLUS I am being told by CISCO that this IOS is not specifically used for any form of natting. What do I do if I need to use Dynamic or PAT NAT Mapping? Any help would be well appreciated? Thanks in Advance SRS Implementation Team SRS Tier 2 Pager# 1-888-860-5913 Virtual Office# 303-604-0037 SUN Office# 303-272-2661 Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=64757t=64757 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Dynamic Natting [7:61584]
thanks Craig Hyman SRS Implementation Team Tier 2 Support [EMAIL PROTECTED] Broomfield Office 303-272-2661 Virtual Office Phone Number 303-604-0037 SkyPager Number 1-888-860-5913 -Original Message- From: mjans001 [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 23, 2003 2:03 PM To: Hyman, Craig; [EMAIL PROTECTED] Subject: RE: Dynamic Natting [7:61584] -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 For example: Internet nat outside E1 nat outside Router 1600 E0 nat inside Network inside DG 10.x.99.100 Internal customers lans ip nat inside source list 100 interface Ethernet1 overload Nat list access-list 100 permit ip 10.x.99.0 0.0.0.255 any access-list 100 permit ip 10.x.100.0 0.0.0.255 any access-list 100 permit ip 10.x.101.0 0.0.0.255 any access-list 100 permit ip 10.x.102.0 0.0.0.255 any Customer LANs ip route 10.x.100.0 255.255.255.0 10.x.99.100 ip route 10.x.101.0 255.255.255.0 10.x.99.100 ip route 10.x.102.0 255.255.255.0 10.x.99.100 - -Oorspronkelijk bericht- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Namens Hyman, Craig Verzonden: woensdag 22 januari 2003 17:13 Aan: [EMAIL PROTECTED] Onderwerp: Dynamic Natting [7:61584] ALL- Has anybody been able to do dynamic natting with a 1601R router using IOS 120221a? Have you been able to use multiple subnets( customer IP;s) and run them through one Nat address? Craig Hyman SRS Implementation Team Tier 2 Support [EMAIL PROTECTED] Broomfield Office 303-272-2661 Virtual Office Phone Number 303-604-0037 SkyPager Number 1-888-860-5913 - -Original Message- From: Silju Pillai [mailto:[EMAIL PROTECTED]] Sent: Friday, August 02, 2002 3:40 PM To: [EMAIL PROTECTED] Subject: RE: How to setup Pix site-to-site VPN with overlapping [7:50255] HI David, I have a link for you. It may help you a bit. It says NAT the existing addresses to a different address at both sites (although the document says one bcoz of the concentrator). http://www.cisco.com/warp/public/707/vpn_pix_private.html. If you are trying this ust tell me if it works or not. regards Silju Version: PGP 8.0 iQA/AwUBPjBYdHdq56XWk+VyEQLpjgCbB3oFZ5RXaO+rXphAaFZIPQExc9MAoPWy w00hZZlvoka9CV4zwuscI0By =dOl9 -END PGP SIGNATURE- Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=61779t=61584 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Dynamic Natting *****HELP******* [7:61679]
ALL- Has anybody been able to do dynamic natting with a 1601R router using IOS 120221a? Have you been able to use multiple subnets( customer IP;s) and run them through one Nat address? Craig Hyman SRS Implementation Team Tier 2 Support [EMAIL PROTECTED] Broomfield Office 303-272-2661 Virtual Office Phone Number 303-604-0037 SkyPager Number 1-888-860-5913 Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=61679t=61679 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Dynamic natting ********HELP********* [7:61682]
ALL- Has anybody been able to do dynamic natting with a 1601R router using IOS 120221a? Have you been able to use multiple subnets( customer IP;s) and run them through one Nat address? Craig Hyman SRS Implementation Team Tier 2 Support [EMAIL PROTECTED] Broomfield Office 303-272-2661 Virtual Office Phone Number 303-604-0037 SkyPager Number 1-888-860-5913 Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=61682t=61682 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Dynamic Natting [7:61584]
ALL- Has anybody been able to do dynamic natting with a 1601R router using IOS 120221a? Have you been able to use multiple subnets( customer IP;s) and run them through one Nat address? Craig Hyman SRS Implementation Team Tier 2 Support [EMAIL PROTECTED] Broomfield Office 303-272-2661 Virtual Office Phone Number 303-604-0037 SkyPager Number 1-888-860-5913 -Original Message- From: Silju Pillai [mailto:[EMAIL PROTECTED]] Sent: Friday, August 02, 2002 3:40 PM To: [EMAIL PROTECTED] Subject: RE: How to setup Pix site-to-site VPN with overlapping [7:50255] HI David, I have a link for you. It may help you a bit. It says NAT the existing addresses to a different address at both sites (although the document says one bcoz of the concentrator). http://www.cisco.com/warp/public/707/vpn_pix_private.html. If you are trying this ust tell me if it works or not. regards Silju Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=61584t=61584 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
using TFTP from your laptop [7:27125]
All, I am connected to the console port on a router that is sitting next to my laptop. I have to upgrade the IOS on the Router. I have a copy of the IOS on my laptop. When I try to send the image over to the router using TFTP it doesn't work. I must be missing something. What am I doing wrong? I need to get this accomplished it and send it out tomorrow. all help will be appreciated. Thanks Craig Hyman SRS Implementation Team Tier 2 Support [EMAIL PROTECTED] Broomfield Office 303-272-2661 Virtual Office Phone Number 303-604-0037 SkyPager Number 1-888-860-5913 Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=27125t=27125 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Basic question here [7:27128]
sorry people for asking boring questions: May I know how to change the IOS of a cisco router? What is the procedures? copy from TFTP server? Guide me pls if you are free Thank you Craig Hyman SRS Implementation Team Tier 2 Support [EMAIL PROTECTED] Broomfield Office 303-272-2661 Virtual Office Phone Number 303-604-0037 SkyPager Number 1-888-860-5913 Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=27128t=27128 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: using TFTP from your laptop [7:27125]
please read below Craig Hyman SRS Implementation Team Tier 2 Support [EMAIL PROTECTED] Broomfield Office 303-272-2661 Virtual Office Phone Number 303-604-0037 SkyPager Number 1-888-860-5913 -Original Message- From: John Neiberger [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 22, 2001 8:50 AM To: [EMAIL PROTECTED] Subject: Re: using TFTP from your laptop [7:27125] Is the laptop connected to the console port or the ethernet interface? console port TFTP won't work over a console connection. If you're using the ethernet port there are still a few things that can go wrong. Are your laptop and router directly connected? If so, are you using a crossover cable? Can your router ping the laptop and vice-versa? If your cabling and IP addressing are correct and you have your tftp server software running, all should be well. Are you using Cisco's tftp server software on your laptop? I have CISCO and 3COM If so, do you have the tftp directory set to the correct location? I can Without more details it's hard to help. If these suggestions don't work, post more details and I'll try to help you out. Can I send the IOS through the console port of the router from my DB9 port??? Regards, John On Thu, 22 Nov 2001 08:59:57 -0500, Hyman, Craig wrote: | All, | | I am connected to the console port on a router that is sitting next to my | laptop. I have to upgrade the IOS on the Router. I have a copy of the IOS on | my laptop. When I try to send the image over to the router using TFTP it | doesn't work. I must be missing something. | | What am I doing wrong? I need to get this accomplished it and send it out | tomorrow. all help will be appreciated. | | Thanks | | Craig Hyman | SRS Implementation Team | Tier 2 Support | [EMAIL PROTECTED] | Broomfield Office 303-272-2661 | Virtual Office Phone Number 303-604-0037 | SkyPager Number 1-888-860-5913 | | | | ___ http://inbox.excite.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=27153t=27125 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
PIX TRAINING [7:24053]
Does anybody know where I can get PIX Training. I am located in the Denver area... Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=24053t=24053 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco router Question [7:22266]
All, Can someone tell me why when I do a clear arp-cache command on a 1601 Router, I am able to communicate to the rest of the network. The communication stops every 3 to 4 hours. HELP!! Craig Hyman SUN SRS Implementation Team Tier 2 Support [EMAIL PROTECTED] Broomfield Office 303-272-2661 Virtual Office Phone Number 303-604-0037 SkyPager Number 1-888-860-5913 Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=22266t=22266 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Need the statements for 1601 router/proxy
Can someone tell me the statements I need to put in this router that will force the arp to grab what is in the router not a external device.. Thanks a ton Craig Hyman SUN SRS Implementation Team Help Desk Tier 2 [EMAIL PROTECTED] Broomfield Office 303-272-2661 Virtual Office Phone Number 303-692-7005 SkyPager Number 1-888-860-5913 _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Please help me with a 1601 Router problem
All, I have a configuration that when a PIX firewall is connected with the 1601 Router, the firewall grabs the IP address. Can I put a statement into the router that will force the router to grab the proxy IP??? Please help HIGH emergency Thanks Craig Hyman SUN SRS Implementation Team Help Desk Tier 2 [EMAIL PROTECTED] Broomfield Office 303-272-2661 Virtual Office Phone Number 303-692-7005 SkyPager Number 1-888-860-5913 -Original Message- From: Alex Lee [mailto:[EMAIL PROTECTED]] Sent: Thursday, March 15, 2001 10:05 AM To: [EMAIL PROTECTED] Subject:Re: Question Cannot find download from the usual download location. Can you post an URL ? ""Nathan Chessin"" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... yes http://www.cisco.com/univercd/cc/td/doc/product/vpn/client/index.htm -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Parris, Brian Sent: Thursday, March 15, 2001 8:20 AM To: '[EMAIL PROTECTED]' Subject: Question Has Cisco come out with a version of Cisco Secure VPN Client software yet, that is compatible with Windows 2000. I can't buy laptops with NT anymore and this is putting me in a real bind. Thanks, Brian _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CISCO PIX FIREWAll ----HELP
Has anybody come across when the pix firewall takes control of the static arp table. What commands in the PIX would cause something like this?// Please help Craig Hyman SUN SRS Implementation Team Help Desk Tier 2 [EMAIL PROTECTED] Broomfield Office 303-272-2661 Virtual Office Phone Number 925-777-0672 SkyPager Number 1-888-860-5913 -Original Message- From: Andy [mailto:[EMAIL PROTECTED]] Sent: Thursday, February 15, 2001 11:09 PM To: suaveguru Cc: [EMAIL PROTECTED] Subject:Re: automating monotonous tasks If you have a unix box I would do this myself: telnet cisco show run | include Serial copy and paste the results to a file delete out any serials you don't want bandwidth statements for create this script #!/bin/bash exec serialsfile while read serial do echo "$serial" serial.cfg echo "bandwidth 56" serial.cfg echo "exit" serial.cfg done run it, paste the results into your telnet session andy On Fri, 16 Feb 2001, suaveguru wrote: hi all I am in the process of automating adding in of bandwidth statements for all my customers' interfaces anyone know of a fast way of automating this tasks , I have about a few hundred interfaces to key in regards, suaveguru __ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail - only $35 a year! http://personal.mail.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: PIX firewall
I have a question about the pix firewall.. I have a network with a couple of devices on it. Here is the network: Frame router--- netra t1 PIX firewall--- Switch-- The switch is where the netra t1 and the router and firewall are connected. When I reboot my netra t1 the PIX firewall grabs the traffic instead of sending back up stream through the Cisco firewall. I remove the firewall everything works okay. Does pix have some type of proxy ARP that grabs the traffic??? Please help Craig Hyman SUN SRS Implementation Team Help Desk Tier 2 [EMAIL PROTECTED] Broomfield Office 303-272-2661 Virtual Office Phone Number 925-777-0672 SkyPager Number 1-888-860-5913 -Original Message- From: Deepak Sharma [mailto:[EMAIL PROTECTED]] Sent: Thursday, February 15, 2001 9:57 PM To: cisco Subject:PIX firewall quick question, and probably dumb question!!. when I set up a pix firewall user--56k dialup--pix--nt server to authenticate the user, does pix use NT auth. or another type of auth.username/password has to be setup within pix... thanks _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: OFF TOPIC - Where is everyone?
Yes we are--- All raider fans Craig Hyman SUN SRS Implementation Team Help Desk Level ll [EMAIL PROTECTED] Broomfield Office 303-272-2661 Virtual Office Phone Number 925-777-0672 SkyPager Number 1-888-860-5913 -Original Message- From: Chuck Larrieu [SMTP:[EMAIL PROTECTED]] Sent: Sunday, January 14, 2001 9:03 AM To: Cisco Mail List; CCIE_Lab Groupstudy List Subject: OFF TOPIC - Where is everyone? You bad boys and girls watching football today instead of studying? GO RAIDERS! :- Chuck http://www.1112.net/lastpage.html _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
HELP on 1601 Router
GROUP-- I have a 1601R router with 8 mg of ram... I have a config file that is a 8 meg. Can I bump up NVRAM on this router or do I have to go to another router?? Please help Craig Hyman SUN SRS Implementation Team Network Technical Lead/Project Manager Virtual Office Phone Number 925-777-0672 SkyPager Number 1-888-860-5913 ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CISCO 1601 Routers
Can anybody tell me if we can get a WIC card for a 1601 router that will support ISDN. Also I need a Ethernet port for a LAN connection. Now here is the hard question... I need the WIC card to support V.90 and V.120. This router will be used overseas... Please help... Craig Hyman SUN SRS Implementation Team Network Technical Lead/Project Manager Virtual Office Phone Number 925-777-0672 SkyPager Number 1-888-860-5913 ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
