CiscoView and HP OpenView [7:62748]
I have the following inquiries and need some advise : 1) Does CiscoView supports voice port ? 2) How many devices can CiscoView supports ? 3) Can CiscoView support non-Cisco product ? Can HP OpenView performs all task that CiscoView do ? thanks in advance. regards Jimmy _ Add photos to your e-mail with MSN 8. Get 2 months FREE*. http://join.msn.com/?page=features/featuredemail Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62748&t=62748 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCNP stuff!!! [7:60410]
Hi, I have lot of CCNP and CCDP stuff for sale. Exam guide, cram sheet etc. Please let me know if you are interested in buying. Thank for your attention. Cheers! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=60410&t=60410 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Profession Cert or PhD!!! [7:60385]
If you will given a choice, would you choose to go for PhD in networking area or juz stay in your field and pursuing profession certification such as CCNP/CCDP etc. Assume that both is fully sponsored, can anyone tell me which one will paid off in a long run? Cheers! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=60385&t=60385 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: SONET/SDH Restoration ! [7:58082]
You mentioned that the GUI will automatically choose the best path and build the cross-connect. So how does it build the link? What is the criteria for choosing it? Could you explain it to me. (Link from A to C). The problem is i am veri curious on how the link is chosen. For example, shortest delay, BW, etc? Cheers ! ""s vermill"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Jimmy wrote: > > > > Hi, > > Sorry if the following question sound stupid to you. let say i > > have 4 nodes. > > > > B > >/ > > AC > > / > >D > > > > If BLSR is employed, how do i know in which direction is the > > packet flow > > from A to C. > > Depends on how you build the cross-connects in the SONET boxes. Many > products, such as Cisco's, use point-and-click GUIs that automatically > choose the best path and build the cross-connects for you. Or you can > manually build them however you like. It simply requires that you move from > box to box through the ring and cross connect incoming STS so-and-so to > outgoing line-group so-and-so. > > >Should it flow through B or D? What is the > > criteria for > > choosing the path? > > It's really your choice. A better illustrative scenario would be traffic > between A and B. As a general rule, you'd choose the direct path vs. going > through C & D - especially since you can "re-use" protection bandwith for > low-priority traffic. Say you establish an STS in slot 6 between A & B. > You can now establish an STS in slot 6 between A & D, D & C, and C & B. Of > course, when there's a ring failure, those re-used connections are killed so > that the primary traffic can be protected. This varies somewhat by vendor > though. It's just a generalization. > > > For BLSR/2, since it mentioned half BW for transmission and > > half for > > protection, therefore i can say the transmission rate is BW/2 > > rite? > > Sorta. Refer back to what I said earlier. But yes, in its purest form, a > 2-fiber BLSR ring uses half of the ring capacity for working traffic and the > other half is reserved for protection (in an OC-48, STS1-1 would be > protected by STS1-25, STS1-2 would be protected by STS1-26...). But traffic > engineering in the SONET world often isn't as simple as it seems. > Revenue-generating rings are usually provisioned quite differently than, > say, a high-priority "mission" ring. > > > Any information will be appreciated !If possible, send me notes > > abt it so > > that i can have a better idea. Thanks alot! > > www.sonet.com used to be a good source for info but appears to have been > highjacked. Just use a good search engine and your bound to find plenty of > info on ring architecture. > > > > > Cheers ! > > Same to ya. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=58172&t=58082 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
SONET/SDH Restoration ! [7:58082]
Hi, Sorry if the following question sound stupid to you. let say i have 4 nodes. B / \ AC \ / D If BLSR is employed, how do i know in which direction is the packet flow from A to C. Should it flow through B or D? What is the criteria for choosing the path? For BLSR/2, since it mentioned half BW for transmission and half for protection, therefore i can say the transmission rate is BW/2 rite? Any information will be appreciated !If possible, send me notes abt it so that i can have a better idea. Thanks alot! Cheers ! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=58082&t=58082 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
STP and Switching ! [7:56061]
Hi, I am confused by the CCNP exam certification guide (Cisco Press). It mentioned that a switch in the Distribution layer would make a better Root Bridge choice than one in Access layer. I thought for distribution switch is of layer 3 so STP is not necessary for it unless it is a flat switched network. (Pg 178 of the book) In the Figure 5.8 (Pg 176), i couldn't understand how come Catalyst D is the DP for Catalyst E and F. I told Catalyst C has priority than D since the MAC address is smaller. Is there any mistake. Can anyone please advise. Where can i find the errata for the ciscopress book? I have went to ciscopress.com but couldn't find any. Can anyone give me the URL? Cheers! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56061&t=56061 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Optical Stuff! [7:55865]
Hi, I have look up thing on Optical stuffs but i cannot find the explanation of passive optical switch and active optical switch? Can someone explain them to me? If possible, give me the URL! I heard that for passive optical switch - it is O-O-O but for active optical switch - it is O-E-O. How do we choose between the two? Cheers! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55865&t=55865 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCO account! [7:55660]
Hi, Heard that i can find online book and training guide on the certification with CCO account. Can someone give me the URL for that. I am going for my CCNP. Other than that and troubleshooting, what other uses can i gain from CCO account. Cheers ! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55660&t=55660 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCNP! [7:55658]
I heard that it is possible to study for CCNP using the resources at cisco.com with CCO account. May i have the URL? What other advantages does the CCO account have other than troubleshooting and TAC cases? Cheers! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55658&t=55658 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco Press [7:55482]
Hi, Can you give me the URL for the book. Cheers! ""Michael Greenbaum"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I know that for myself, anything that changed from the older Cisco Press > books were able to be found on CCO. I used CCO for studying for the CIT. > I found the Cisco Press book completely online and was the resource I > used to pass well on the first try. > > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of > Robert Edmonds > Sent: Sunday, October 13, 2002 1:34 PM > To: [EMAIL PROTECTED] > Subject: Re: Cisco Press [7:55482] > > > I can't speak for all four, but I know I passed the switching exam using > the 5xx series books. The routing exam has added IS-IS, which is not > covered in the 5xx series books, so you may want to add that to your > studying. I'm not sure about BCRAN and CIT. > > ""Irfan Hussain"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Does any one know when Cisco Press will be releasing the next set of > > Books for CCNP 6xx series? Whats the main difference between the 5xx > > series > exams > > for CCNP and the 6xx series? Can I still use the Cisco Press 5xx > > series books to pass the 6xx series CCNP tests? Thanks for all your > > help in advance. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55524&t=55482 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: BCRAN Passed. [7:54732]
How is the simulation question? Easy? How many simulation question altogether? ""Amir Tahir"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > HI, > I used Cisco certification guid, Sybex exam notes and amother book named " > Remote access for cisco networks by bill burton. exam was ok but i had > problems in simulation Question. I could not perform the command > " copy run start" i was keep geeting wrror. then i tried "wr" command to > cave running configuration but could not save it. so i let that Question go > without that. rest was ok not that bad > I spent almost 6-10 hrs a day to review stuff & finish cisco book almost 4 > times, coz i m not working in cisco networks yet so > > thanks for your mail > if U have any Q please feel free to ask. > regards > Amir Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54839&t=54732 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Backbone ? [7:54590]
If it is connected to another network, then it is a backbone between the two network rite? Else if it is connect to the Internet, there will not be any backbone in the network? Rite? Correct me if wrong. Sorry, me new in this line. So have to seek advice from you all. Cheers, Jimmy ""Priscilla Oppenheimer"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Jimmy wrote: > > > > Hi, > > Just want to clarify something. Let say i have middle-size > > network which all > > the switches (around 4) connected together to a router. The > > backbone of the > > network should be the toward the WAN side which is from the > > router onsward > > rite? Or is it the connection from the switch to the router? > > > > > > > > Switch-Switch 1--\ > > Hub -Switch 2---\ > > Switch-Switch 3---/ Router -- (Backbone) > > Hub-Switch 4--/ > > > > It's hard to say, but it looks like you have a collapsed backbone and it's > the router. When multiple links converge into one device, such as a switch > or router, then it's often called a collapsed backbone. > > Where does the WAN go? If it just accesses another network, such as the > Internet, then it wouldn't normally be called a backbone. But if you have an > enterprise network with a core of WAN links that connect campus LANs, you > could call the WAN core the backbone of the enterprise network. > > Usually a backbone has more capacity than the other links in the network, > however, and so usually a WAN link doesn't act as a backbone for LANs. A > more usual use of the term would be a Gigabit Ethernet backbone that acts as > the backbone for 10 and 100 Mbps Ethernet segments. > > It's not really a scientific term, though, and it gets used in many > different ways. The idea is that when you draw your topolgoy, you will > undoubtedly have some larger transmission link that aggregates traffic from > smaller links. That larger link is a backbone. The drawing should look like > the bone in your back that connects other bones. It's just an analogy. > > Priscilla Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54617&t=54590 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Backbone ? [7:54590]
Hi, Just want to clarify something. Let say i have middle-size network which all the switches (around 4) connected together to a router. The backbone of the network should be the toward the WAN side which is from the router onsward rite? Or is it the connection from the switch to the router? Switch-Switch 1--\ Hub -Switch 2---\ Switch-Switch 3---/ Router -- (Backbone) Hub-Switch 4--/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54590&t=54590 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: LAN Design [7:54023]
First of all, thank for the wonderful response. So from what you all have said. If the user is for normal purpose like running some application on servers and access the Internet. Will a 100Mbps be sufficient for 300 users. As for the users, they will be splitted into several group of around 15-20 each.Or a 10Mbps switch will be more than sufficient for it. Can i calculate the BW for each user in this manner: 100M / 300 (no of user) Assuming full usage. Let say i have around 3 storey of about 300 users each, The backbone switch should be 10x the BW of each floor rite? Cheers, Jimmy Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54159&t=54023 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: LAN Design [7:54023]
hmm...Let don't talk about product. Just for a general view. Will a normal 100Mbps switch able to support 300 user? Is it realistic in real life application? ""Larry Letterman"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > which platform are you going to use for 300 users... > 6500 ? > 4006 ? > or multiple stackables ? > > Jimmy wrote: > > >Let say if i use a 100Mbps switch for 300 user for each floor. Will it be > >very slow? How do i really calculate the BW for each user. Doing an > >approximation? 100M/300 ? > > > >Cheers, > >Jimmy > > > >""Jimmy"" wrote in message > >[EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > >>If i have to design network for 3 storey on a building. There are around > >>200-300 workstations in 2 storey each. Is it advisable to use Ethernet to > >>link them up. As for the other storey it is for admin purpose. The > >> > >distance > > > >>is around 150m between the further storey. However it is possible to put a > >>switch/router at the middle for interconnect. > >> > >>Cheers, > >>Jimmy > -- > > Larry Letterman > Network Engineer > Cisco Systems Inc. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54044&t=54023 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: LAN Design [7:54023]
Let say if i use a 100Mbps switch for 300 user for each floor. Will it be very slow? How do i really calculate the BW for each user. Doing an approximation? 100M/300 ? Cheers, Jimmy ""Jimmy"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > If i have to design network for 3 storey on a building. There are around > 200-300 workstations in 2 storey each. Is it advisable to use Ethernet to > link them up. As for the other storey it is for admin purpose. The distance > is around 150m between the further storey. However it is possible to put a > switch/router at the middle for interconnect. > > Cheers, > Jimmy Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54034&t=54023 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
LAN Design [7:54023]
If i have to design network for 3 storey on a building. There are around 200-300 workstations in 2 storey each. Is it advisable to use Ethernet to link them up. As for the other storey it is for admin purpose. The distance is around 150m between the further storey. However it is possible to put a switch/router at the middle for interconnect. Cheers, Jimmy Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54023&t=54023 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Concept [7:53470]
Hi, I am new in this line. Just wonder if anyone can explain the following term for me. 1. What is the purpose for CSU/DSU? (To terminate a T1) Is it use for short distance too or it is only use for long distance? 2. What about LTU, NT and TE? 3. Any one have play with RAD equipment before? Cheers, Jimmy Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53470&t=53470 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Does IOS 11.1(2) support "show tech" command [7:50494]
Hi all : Does anyone know whether IOS 11.1(2) support "show tech" command ? I have a 2501 router running on 11.1(2) and it does not has "show tech ". However another 2501 router running on 11.0(22) and it has "show tech" command. Thanks in advance. cheers Jimmy __ Do You Yahoo!? Yahoo! Health - Feel better, live better http://health.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=50494&t=50494 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Convert serial port to ISDN interface [7:49994]
Just wonder can I convert serial port on cisco 2501 to ISDN port. If yes , how should I do that and what other equipemnt is needed ? I can't find any cisco documents from Cisco page. thanks in advance. regards Jimmy __ Do You Yahoo!? Yahoo! Health - Feel better, live better http://health.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49994&t=49994 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Time-Base ISDN connection [7:48991]
Does anyone have the sample configuration for Time-Base ISDN connection. What I want to do is the only specific time , like from 9am to 6pm , ISDN link bettwen 2 router will be up. Thanks in advance. regards Jimmy __ Do You Yahoo!? Yahoo! Autos - Get free new car price quotes http://autos.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=48991&t=48991 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco ACS Server Problem [7:46193]
I am configuring a Cisco ACS server as a TACACS+ server. I have a router will use ACS server for authentication. At the router, all parameters like tacacs host , tacacs key has been configured. ACS server is located inside the Firewall. Few username are created in ACS server. From router , I am able to ping to the ACS server and able to telnet to ACS server port 49. Firewall log show that packets are accepted. However no authentication can be done. I got "access denied". I have done a debug aaa authentication. Jun 10 20:39:07: AAA/AUTHEN: create_user user='' ruser='' port='tty3' rem_addr=' 102.102.118.66' authen_type=1 service=1 priv=1 Jun 10 20:39:07: AAA/AUTHEN/START (0): port='tty3' list='' action=LOGIN service= LOGIN Jun 10 20:39:07: AAA/AUTHEN/START (0): using "default" list Jun 10 20:39:07: AAA/AUTHEN/START (410787771): Method=TACACS+ Jun 10 20:39:07: AAA/AUTHEN (410787771): status = ERROR Jun 10 20:39:07: AAA/AUTHEN/START (410787771): Method=LOCAL Jun 10 20:39:07: AAA/AUTHEN (410787771): status = GETUSER Jun 10 20:39:10: AAA/AUTHEN/CONT (410787771): continue_login Jun 10 20:39:10: AAA/AUTHEN (410787771): status = GETUSER Jun 10 20:39:10: AAA/AUTHEN/CONT (410787771): Method=LOCAL Jun 10 20:39:10: AAA/AUTHEN (410787771): status = GETPASS Jun 10 20:39:12: AAA/AUTHEN/CONT (410787771): continue_login Jun 10 20:39:12: AAA/AUTHEN (410787771): status = GETPASS Jun 10 20:39:12: AAA/AUTHEN/CONT (410787771): Method=LOCAL Jun 10 20:39:12: AAA/AUTHEN (410787771): password incorrect Jun 10 20:39:12: AAA/AUTHEN (410787771): status = FAIL Jun 10 20:39:14: AAA/AUTHEN: free user='test1' ruser='' port='tty3' rem_addr='10 2.102.118.66' authen_type=1 service=1 priv=1 Jun 10 20:39:14: AAA/AUTHEN: create_user user='' ruser='' port='tty3' rem_addr=' 102.102.118.66' authen_type=1 service=1 priv=1 Jun 10 20:39:14: AAA/AUTHEN/START (0): port='tty3' list='' action=LOGIN service= LOGIN Jun 10 20:39:14: AAA/AUTHEN/START (0): using "default" list Jun 10 20:39:14: AAA/AUTHEN/START (440731952): Method=TACACS+ Jun 10 20:39:14: AAA/AUTHEN (440731952): status = ERROR Does anyone has any idea ? regards Jimmy __ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=46193&t=46193 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Password privilege [7:45818]
Hi all : I have set a username "test" with privilege 2 for "show running-config". However when I login using "test" and perform show running-config ; only 1st line and last line of the configuration can be seen. Any idea ? username cisco password 7 104D000A0618 username test privilege 2 password 7 021201481F ip subnet-zero no ip domain-lookup privilege exec level 2 show running-config privilege exec level 2 show And the result is as below : Building configuration... Current configuration: ! ! ! ! end ABC-Demo-S'pore# cheers Jimmy __ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=45818&t=45818 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
test prep 607 CCNA HELP [7:40228]
I'm studying for the CCNA test. but should i wait to pick up the Sybex 607 book, or will the 507 book suffice? You guys mention Todd's book. You guys are reffering to the Sybex book right? Also, is the test the same as the 507 but with simulators or did they scrap the entire question list and start a new one? Please help me out... thanks, Jimmy. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=40228&t=40228 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
How to interpret information on Show version [7:31943]
Hi all : Can anyone enlighten me what does 8192K/4096K bytes mean when we perform show version ? cisco 4000 (68030) processor (revision 0xC0) with 8192K/4096K bytes of memory. Processor board ID 5071561 G.703/E1 software, Version 1.0. Bridging software. X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. 2 Ethernet/IEEE 802.3 interface(s) 2 Serial network interface(s) 128K bytes of non-volatile configuration memory. 4096K bytes of processor board System flash (Read/Write) Jimmy _ Join the worlds largest e-mail service with MSN Hotmail. http://www.hotmail.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31943&t=31943 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
2000 professional [7:24175]
I am trying to get hyperminal to work wih 2000 Professionalno such luck _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=24175&t=24175 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
2000 professional & hyperterminal [7:24171]
Is there anything special that is required to get hyperterminal to work with 2000 professional _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=24171&t=24171 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Fwd: Making a Difference [7:20055]
Sumner WA >>> >> >109. Gary Baker, Sumner WA >>> >> >110. Britain Baker, Sumner WA >>> >> >111. Julia Baker, Sumner WA >>> >> >112. Jill Baker,Sumner WA >>> >> >113. Carl D. Hill Sumner, Wa >>> >> >114. Helen P.Hill-Sumner, WA >>> >> >115. Cecil G. Jepson, Mtlk Terr.,WA >>> >> >116. Betty R. Jepson, Mtlk Terr.,WA >>> >> >117. Penny Jepson >>> >> >118. LeAnn Riegel, Univ. Place, WA >>> >> >119. Heather E.Ehli,Puyallup, WA >>> >> >120. Heather L. Conatser, Puyallup,WA >>> >> >121. Sarah L. Sturzen, Graham, WA >>> >> >122. Briana B. Holmes Tacoma, wa >>> >> >123. Ashley nelson puyallup, WA >>> >> >124. Crissy Bray, Sumner, WA >>> >> >125. Andrew Brady, Sumner WA >>> >> >126. Elizabeth Alarcon, Glendale,AZ >>> >> >127. Gloria Records, Tucson, AZ >>> >> >128. Stephen Records Tucson, AZ >>> >> >129. Dr. Edward L. Kemper, Sacramento, CA >>> >> >130. Ronald Dyck Sacramento, CA >>> >> >131. Cathy Dyck Sacramento, CA >>> >> >132. Chrissy Kay Oregon >>> >> >133. Rhonda Weaver, OR >>> >> >134. Terry Weaver, OR >>> >> >135. Dave Shank, OR >>> >> >136. Carol Shank, OR >>> >> >137. Ben Shank, OR >>> >> >138. Tim Shank, OR >>> >> >139. Vonda Bitikofer, OR >>> >> >140. Marty Chipman, WA >>> >> >141. Joan Chipman, WA >>> >> >142. Ray Chipmanm, WA >>> >> >143. Beverly Wenge, WA. >>> >> >144. Donald Wenge, WA. >>> >> >145. Vicki Graf, CA >>> >> >146. Corrine Bonsey, WA >>> >> >147. Ric Bonsey, WA >>> >> >148. Dawn Garruto, WA >>> >> >149. Chris Garruto, WA >>> >> >150. Sandy Barnes,Florida >>> >> >151. Jay Crutchfield, FL >>> >> >152. Lorie Evans, FL >>> >> >153. Asa L. Evans III, FL >>> >> >154. Ashley Woodard, FL >>> >> >155. Todd Woodard, FL >>> >> >156. Maria Roland, FL >>> >> >157. William Roland, FL >>> >> >158. Jeff Bos, Winter Springs, Florida >>> >> >159. Stacey Bos, Winter Springs, Florida >>> >> >160. Woody Potter, Las Vegas, NV >>> >> >161. D'nee Potter, Las Vegas, NV >>> >> >162. Marshia Popplewell, Denison,TX >>> >> >163. Jerry Johnson, Denison, Tx. >>> >> >164. Rosella Elifrits, Sunrise Beach,MO >>> >> >165. Miranda Elifrits, Sunrise Beach, MO >>> >> >166. Pete Elifrits, Sunrise Beach MO >>> >> >167. Gary Elifrits, St. Joseph, MO >>> >> >168. Brenda Elifrits, St. Joseph,MO >>> >> >169. Martha Ann Dwyer, Kansas City, MO >>> >> >170. Edith McHugh, Kansas City, MO >>> >> >171. Pamela Knudson, Kansas City, MO >>> >> >172. Robert Knudson, Kansas City, MO >>> >> >173. Jennifer Cole, Higginsville,MO >>> >> >174. Ryan Cole, Higginsville, MO >>> >> >175. Kim Levy, Blue Springs, MO >>> >> >176. James Levy, Blue Springs, MO >>> >> >177. Debbie Tuter, Lee's Summit MO >>> >> >178. Barb Johnson, Overland Park, KS >>> >> >179. Linda Gray, St. Charles, IA >>> >> >180. Rich Gray, St. Charles, IA >>> >> >181. Brian Gray, St. Charles, IA >>> >> >182. Teri Mash, Waukee, IA >>> >> >183. Thomas Mash, Waukee, IA >>> >> >184. Colleen McClaflin, Des Moines, IA >>> >> >185. James McClaflin, Des Moines, IA >>> >> >186. Kim Sanford, Des Moines, IA >>> >> >187. Peg Herman, Truro, IA >>> >> >188. Jim Herman, Truro, IA >>> >> >189. Don Brichacek, Truro, Ia. >>> >> >190. Phyllis Brichacek, Truro, IA >>> >> >200. DEEDEE BUCHANAN 'TRURO' IA >>> >> >201. Tonia Rouse, Blue Hill NE >>> >> >202. Nancy B. Johnson, Havelock, IA >>> >> >203. Gennifer L. Scott, Emmetsburg, IA >>> >> >204. Michael J. Scott, Emmetsburg, IA. >>> >> >205. Rick Nielsen, Emmetsburg, IA >>> >> >206. Rachel Krull, Emmetsburg, IA >>> >> >207. Allison Reneau, Sioux Fall, SD >>> >> >208. Tom Reneau, Sioux Falls, SD >>> >> >209. Kim Brusati, Sioux Falls, SD >>> >> >210. Derrick Hilbrands, Sioux Falls, SD >>> >> >211. April Sadler, Sioux Falls, SD >>> >> >212. Doug Sadler, Sioux Falls, SD >>> >> >213. Alvina Borchers,Sioux Falls, SD >>> >> >214. Henrietta Kay Myers, Sioux Falls, SD >>> >> >215. Sharon Baer Middlebury, IN >>> >> >216. Ed Baer Middlebury, IN 217 Ted Wrench Coventryville, NY >>> >> >218. Brenda Wrench Coventryville NY >>> >> >219. Jevene Davis, Forest, VA >>> >> >220. Lee Baer, Virginia Beach, VA >>> >> >221. Filomena Baer, Virginia Beach, VA >>> >> >222. Vaughan Davis, Forest, VA >>> >>> >> >223. Angela R., Gretna,VA >>> >> >224. Steven R., Gretna, VA >>> >> >225. Ian R., Gretna, VA >>> >> >226. Diane W. Wallace, Raleigh, NC >>> >> >227. Gary R. Wallace, R >>> >> >228. Kay F., Pittsburgh, PA >>> >> >229. Theodore Towns, Pittsburgh, PA >>> >> >230. Clark Walter, Pittsburgh >>> >> >231. Jean Walter, Pittsburgh >>> >> >232.Dale Braxton,Moon Twp.Pa >>> >> >233.Bea Braxton,Moon Twp.,Pa. >>> >> >234. Lynn Monahan >>> >> >235. Jessica Hrabovsky, Pittsburgh, PA >>> >> >236. Thomas Hrabovsky, Pittsburgh, PA >>> >> >237. Tina M Hamiel, Wilkinsburg, PA >>> >> >238. Stephanie R. Hamiel, Wilkinsburg, PA >>> >> >239. Sondra J. Rick, Wilkinsburg, PA >>> >> >240. Levelle H. Rice, Sr. Wilkinsburg, PA >>> >> >241. Dana Remaley, New Stanton, PA >>> >> >242. Sus >>> >> >243. Phil West >>> >> >244. Lynn West >>> >> >245 Art West >>> >> >246. Wilbur Hessel N. Ft. Myers Fl. >>> >> >247. Lynn Buchanan Tallahassee, FL >>> >> >248. Burke Buchanan Tallahassee, FL >>> >> >249. Ruby Brown, Macon, Georgia >>> >> >250. Pat Jarvis >>> >> >251. Suzanne Goss >>> >> >252. Robin Goss >>> >> >253. Tammy Hall - Savannah, GA >>> >> >254. Forrest Waddle, Dunedin, FL >>> >> >255. Joyce Waddle, Dunedin, FL >>> >> >256. Robert Davenport >>> >> >257. Pete Pound, Bessemer, AL >>> >> >258. Frank Buttler, Birmingham,AL >>> >> >259. Leslie K., Birmingham,AL >>> >> >260. Jesse C., Birmingham,AL >>> >> >261. Jane K. Birmingham, Al >>> >> >262. Raymond K. Birmingham, Al >>> >> >263. Robert A. Birmingham, Al >>> >> >264. Ellen A. Birmingham, Al >>> >> >265. Heather D. Birmingham, Al >>> >> >266. Nancy D. Birmingham, Al >>> >> >267. Sammy D. Birmingham, Al >>> >> >268. R. Voelkert, Charleston, SC >>> >> >269. E. Voelkert, Charleston, S.C.. >>> >> >270. Gordon Grandholm, Sawyer, Mi >>> >> >271. Geraldine Grandholm, Sawyer, Mi >>> >> >272. R. Freischlag, Sawyer, Mi. >>> >> >273. W. Freischlag, Sawyer, Mi. >>> >> >274. Warren Jensen, Orland Park, IL >>> >> >275. Judy Jensen, Orland Park, IL >>> >> >276. Sheri Jensen, Orland Park, IL >>> >> >277. Tom Restaino >>> >> >278. Cristina Garcia, Chicago, IL >>> >> >279. Patrizia Duca, IL. >>> >> >280. Suzanne M. Anderson, Chicago, Il >>> >> >281. Laura Spickelmier, Charlotte, NC >>> >> >282. Brenda Helmle, Tulsa, OK >>> >> >283. Christy Wood, Enid, OK >285. Beth Lister Louisville CO >>> >> >286. Jean Hopson, CO >>> >> >287. Bernadette Jorgensen CO >>> >> >288. Chuck Stump, Highlands Ranch, CO >>> >> >289. Tom DeWees, Dallas TX >>> >> >290. Pat DeWees, Dallas TX >>> >> >291. Debra Aughinbaugh, Dallas, TX >>> >> >292. John Aughinbaugh, Dallas, TX >>> >> >293. Caira Franz, Texas >>> >> >294. Mike Franz, Texas >>> >> >295. Angie Thompson, Texas >>> >> >296. Sky Thompson >>> >> >297. Diana S. N.Y. >>> >> >298. Mert S. N.Y. >>> >> >299. Kelly Ward >>> >> >300. Paul Ward >>> >> 301. Brandon Conrad Fl. >>> >> 302. Shanon M. FL >>> >> >303. Paul R. Benjamin Jr, FL >>> >> 304. Kalie Frye, FL. >>> >> 305. Amber Frye, FL. >>> >> 306. Sandi Frye, FL. >>> >> 307. Alan Frye, FL. >>> >> 308. Charles G. Williams, Sr.- FL >>> >> 309. Ola R. Williams, FL >>> >> 310. Georgia Ann Frank, Ga. >>> >> 311. Betty Russell >>>312. Harold Russell >>> >> 313. Diana Chavers >>> >> 314. Annie Chavers >>> >> 315. Glen Chavers >>>316. Kay Gunckel >>>317. Shirlyn W. Johnson, Nashville, TN >>>318. Rhonda S. Hale, Nashville, TN >>319. Anita Hale, Atlanta, GA >320. India Hall, Atlanta, GA >>>321. Jimmy L. Halbert, Atlanta, GA. >>> >>> >>>> >>>- >>>Terrorist Attacks on U.S. - How can you help? >>>Donate cash, emergency relief information inYahoo! News. >> > _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=20055&t=20055 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: sub-interface on Ethernet or FastEthernet [7:19394]
Hi Jeff : Currently I am using cisco 4000 with 2 ethernet port ( 10Base T ) , interface Ethernet 1 got 3 networks ( 2 secondary IP ) , Interface Ethernet 0 got 1 network. I plan to use sub-interface in interface Ethernet 1 instaed of secondary IP. Interface Ethenet is connected to hub. Some people told me that we can only create sub-interface on FastEthernet and NOT Ethernet ( 10Base ). Is it true ? What is the minimum IOS version should I use ? cheers Jimmy >From: "Jeff Smith" >To: [EMAIL PROTECTED], [EMAIL PROTECTED] >Subject: Re: sub-interface on Ethernet or FastEthernet [7:19394] >Date: Tue, 11 Sep 2001 12:46:02 + > >Certainly can. Used often when routing between vlans when the router is >external to the switch (non- rsm, msfc, etc)- the old "router on a stick" >scenario. > >>From: "Jimmy Leong" >>Reply-To: "Jimmy Leong" >>To: [EMAIL PROTECTED] >>Subject: sub-interface on Ethernet or FastEthernet [7:19394] >>Date: Tue, 11 Sep 2001 06:47:35 -0400 >> >>Hi all : >> >> Can anyone enlighten me whether I can create sub-interface on >>Ethernet >>or FastEthernet. >> >>thanks in advance >> >>regards >>Jimmy >> >> >>_ >>Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=19520&t=19394 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
sub-interface on Ethernet or FastEthernet [7:19394]
Hi all : Can anyone enlighten me whether I can create sub-interface on Ethernet or FastEthernet. thanks in advance regards Jimmy _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=19394&t=19394 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
7513,4700 [7:13452]
Hello Guy/Ladies Listed nelow is some equipment I am trying to get rid of. Has been in a lab. In fairly good condition. I will provide serial cables with the equipment approximately 8-10 and pay shipping. 7513 A cisco RP1 (68040) processor (revision A0) with 16384K bytes of memory. Processor board ID 0039B7A2 G.703/E1 software, Version 1.0. Bridging software. X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. Primary Rate ISDN software, Version 1.0. 1 Switch Processor. 1 EIP controller (6 Ethernet). 1 FEIP controller (2 FastEthernet). 2 FSIP controllers (16 Serial). 6 Ethernet/IEEE 802.3 interfaces. 2 FastEthernet/IEEE 802.3 interfaces. 16 Serial network interfaces. 128K bytes of non-volatile configuration memory. 4096K bytes of flash memory sized on embedded flash. Price($4,200.00) 7513 B RP (68040) processor with 16384K bytes of memory. G.703/E1 software, Version 1.0. X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. Bridging software. 1 Switch Processor. 2 EIP controllers (6 Ethernet). 1 FSIP controller (8 Serial). 6 Ethernet/IEEE 802.3 interfaces. 8 Serial network interfaces. 128K bytes of non-volatile configuration memory. 4096K bytes of flash memory sized on embedded flash. Price($3,600.00) 4700 cisco CPA4700 (R4K) processor (revision F) with 65536K/16384K bytes of memory. Processor board ID 05827066 R4700 processor, Implementation 33, Revision 1.0 (Level 2 Cache) G.703/E1 software, Version 1.0. X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. Authorized for CiscoPro software set only. 2 Token Ring/IEEE 802.5 interfaces. 128K bytes of non-volatile configuration memory. 16384K bytes of processor board System flash (Read/Write) 4096K bytes of processor board Boot flash (Read/Write) Price($1,100.00) _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=13452&t=13452 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
7513 s & 4000 sale [7:12853]
I have two 7513 each loaded with extras for sale and a 4500. Will take the best offer before sticking it on ebay. _ Get your FREE download of MSN Explorer at http://explorer.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=12853&t=12853 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
telco question [7:11859]
Does any one know if there is a telco simulator software program out there anywhere. I need to simulate a dailup from one laptop to another. _ Get your FREE download of MSN Explorer at http://explorer.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=11859&t=11859 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
NAT [7:11799]
Here is a Brain teaser In Network Address Translation (NAT), one ip address has to be substituted with another. When this happens, the ip-layer checksum must be recalculated. What is the quickest way possible to do this operation, and give your own flavour of pseudo (or real if you want) code to show how it is done. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=11799&t=11799 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
setbased vs IOS based Switches [7:9168]
Does anyon know of a good source for information on vlan configuration on IOS based switches. It seems that most books only talk about set based switches. My switches are IOS based... thanks _ Get your FREE download of MSN Explorer at http://explorer.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9168&t=9168 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
telnet configuration [7:7779]
Hello Guys / Ladies, I am having problems getting my lab telnet configuration up and going. I can telnet from my access router to any of the other routers; however once I am there I can not telnet back to the access_router or any of the other routers. I have posted my current config on the access router. Take a look and see if I am doing is ok...what am I missing that is keeping me from being able to telnet back to the access router Thanks All Jimmy L. Halbert Current configuration: ! version 11.3 no service password-encryption ! hostname Access_Router ! enable secret 5 $1$3s/V$Y84ec8t4.b9HNu2YUvwH/. enable password cisco ! ip host Access_Router 2001 192.168.1.1 ip host r25001 2002 192.168.1.1 ip host r25002 2003 192.168.1.1 ip host r25003 2004 192.168.1.1 ip host r25004 2005 192.168.1.1 ip host r40001 2006 192.168.1.1 ip host r75131 2007 192.168.1.1 ip host r75132 2008 192.168.1.1 ! ! interface Loopback0 ip address 192.168.1.1 255.255.255.0 ! interface Ethernet0 no ip address shutdown ! interface Serial0 no ip address shutdown ! interface Serial1 ip address 10.1.1.1 255.0.0.0 ! router rip network 10.0.0.0 ! ip classless banner motd ^C Welcome To The Access Router ^C ! line con 0 line 1 16 no exec modem InOut _ Get your FREE download of MSN Explorer at http://explorer.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=7779&t=7779 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
telnet, configuration [7:7771]
hello guys / ladies, I am having problems getting my telnet to work in the lab properly. I can telnet to any of the routers; However once there I am stuck and can not get back to the access_router or any of the other routers. I have pasted in my config, if anyone has a suggestion or sees an error in it let me know... Thanks All Jimmy L. HalbertCurrent configuration: ! version 11.3 no service password-encryption ! hostname Access_Router ! enable secret 5 $1$3s/V$Y84ec8t4.b9HNu2YUvwH/. enable password cisco ! ip host Access_Router 2001 192.168.1.1 ip host r25001 2002 192.168.1.1 ip host r25002 2003 192.168.1.1 ip host r25003 2004 192.168.1.1 ip host r25004 2005 192.168.1.1 ip host r40001 2006 192.168.1.1 ip host r75131 2007 192.168.1.1 ip host r75132 2008 192.168.1.1 ! ! interface Loopback0 ip address 192.168.1.1 255.255.255.0 ! interface Ethernet0 no ip address shutdown ! interface Serial0 no ip address shutdown ! interface Serial1 ip address 10.1.1.1 255.0.0.0 ! router rip network 10.0.0.0 ! ip classless banner motd ^C Welcome To The Access Router ^C ! line con 0 line 1 16 no exec modem InOut _ Get your FREE download of MSN Explorer at http://explorer.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=7771&t=7771 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
reverse telnet... [7:6906]
Hello Guys / Ladies, I am trying to get reverse telnet configured on a 2511. I have 7 other routers connected via an asyn scsi cable. all seems to be well but still can not get it going. can not telnet to other router via the access server. If anyone has quick and dirty notes on this configuration, I would appreciate it if you can email it to me ... Thanks a lot _ Get your FREE download of MSN Explorer at http://explorer.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=6906&t=6906 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
SAP question??
A service SAP received without a route to that service is A. Put on hold until the route is learned B. Ignored C. Installed in the SAP table D. Forward to the Designate Router /J _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: exam prep
Lawlessly!!
On 22 Nov 2000 13:05:55 -0500, [EMAIL PROTECTED] ("Bob Perez")
wrote:
>Does anyone have any Exam prep tests that they would like to exchange for?
>I would like the BSCN from Beachfront quizzer if possible. I have BSCN and
>BCMSN from Mcse2be.com, and would like to exchange with anyone if they have
>another exam prep for the BSCN.
>
>
>_
>FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: VPN CLIENT
Look at VPDN. I had the same problem and eventually solved it by bringing in the Win2000 clients using M$ pptp/mschap/mppe. You will have to authenticate to a Radius server that understands mschap/mppe-keys (i.e. M$'s -- see NT 4.0 Option pack or W2k Server). I know it's only 40-bit, but hey, it's encryption. Besides the vips are already on 2000 so it's a mandate. I've found no other way. On the other hand, I've seen a lot of references on Cisco's web site to a new 'Cisco Secure VPN Client' for all Windows OS'es, supposedly due before this year's end. Anybody heard any more on this?? It would sure be nice because there is a lot more functionality in Cisco's client verses M$'s. Hope this helps, Jim. On Sun, 3 Sep 2000 [EMAIL PROTECTED] wrote: > Hi, > > > I have configured a system which contain net to net VPN with des > encryption between a secure PIX and a Cisco router. > On each of them I have configured a VPN client connection with extended > authentication against a Radius server. > The net to net VPN works fine and the clients with the Cisco secure client > software works fine as well. > What I need is to configure the Windows 2000 IPSEC VPN client and I have no > idea how it works, some help will be most appreciated. > > >10x in advance > > > > GIL > CCNA/CCDA > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
