ccnp switching passed!!! [7:57482]
People, yesterday I took the 640-604 exam and passed with 901, I did spend 37 minutes to answer the questions which were so well defined. Used only the cisco press certification guide for the 504 exam and some lab, I can say the material for 504 covers very well the 604 contents. So, those who has the old material can keep tranquil. For who will do the exam, good luck and thanks for the group help. Regards, leo Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=57482t=57482 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCIE Lab test price? [7:55487]
Anybody could tell me how much do you pay for try the ccie lab? I4ve heard that for written test the price is $300, but for the lab I never heard about. thanks, Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55487t=55487 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Period to take ccnp tests [7:54848]
Guys, if one take a ccnp exam today, is there a time limit to take the other 3 exams or else the exam gets invalid? Can someone help me? tks a lot, leo Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=54848t=54848 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
MRTG for CPU Load [7:54174]
Anyone who experienced monitoring Cisco Router=B4s CPU Load could tell = me the OID used? By the way, if the procedure to generate the cfg file if it is = different is welcome! =20 Thanks a lot people, =20 leo Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=54174t=54174 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
2500 memory question [7:53528]
People, Any advise for my problem is welcome : I have an 2501 with a 4MB DRAM module that works fine. Yesterday, I got 3 differents 8MB DRAM modules and I tried to upgrade it, but when it boots, it shows me only 4MB DRAM. I tried change the first module but, the other two gave me the same symptom. Anyone know something to help me? thanks a lot, leo Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=53528t=53528 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Foundations Exam [7:52464]
Hi all, Anyone who took the CCNP/DP Foundations Exam could give me some comment about it? The CCNPs could talk about the two ways for achieve the certification : one exam in each time + CIT or Foundations + CIT. What are the good and the bad points on each way on your opinion? tks in advance, leo Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=52464t=52464 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCDA Prep book is good? [7:36762]
Hi people, Anybody who used the Cisco Press -CCDA Exam Preparation Guide- and took the DCN exam could give some advise about it? Is only it sufficient or the exam prep? tks a lot, leo ccna Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=36762t=36762 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Pass mark for ccnp [7:31503]
What is the passing marks for the exams:? 640-503 - Routing 640-504 - Switching 640-505 - Remote Access 640-506 - Support thanks a lot, Leonardo, ccna. [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=31503t=31503 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Thanks [7:1478]
Hello people, I would like thanks all you who help me on the way for cert. Yesterday I got my CCNA with a score 913. My study material was the CCNA Preparation guide by Wendell Odom and CCO, I think this two are the essencial material for test studing. For all that will try STUDY, STUDY and be carefull with the details so, the test will be funny! Again, thanks a lot and good luck for all. leonardo Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=1478t=1478 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RES: Router Modem
Dear, try this simple config on router : line aux 0 transport input all modem inout flowcontrol hardware speed 38400 If problem persists, look this page : http://www.cisco.com/warp/public/471/50.html GooD LucK -leonardo. -Mensagem original- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]Em nome de SH Wesson Enviada em: terça-feira, 3 de outubro de 2000 22:09 Para: [EMAIL PROTECTED] Assunto: Router Modem I'm trying to dial into a US Robotics 33.6 external modem connected to my Cisco 2520 router. The modem has a db-25 connector on it which I've placed a db-25 to RJ-45 convertor on it. From the RJ-45 I connected a Cisco rolled cable (console cable) to it and connected the other end of the RJ-45 cable to the AUX interface on the router. The configuration are already on the AUX interface on the router. When I dialed to it, it answers and seems to connect via hyperterminal. However, after the connection, I don't seem to be getting any response back from the router or something like that because nothing seems to echo back. Any assistance would be appreciated. Thank you. _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
About CCNA 2.0 test
Hello, anybody who took ccna test 2.0 got ATM or Gigabit Eth, Token Ring questions?? at Cisco preparation guide they sign this. Is it true? thanks, -leonardo **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RES: access list is not working! why?
dear, do not forget setting the port 80 to deny www access ok. best regards, -leonardo -Mensagem original- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]Em nome de beth shriver Enviada em: terça-feira, 5 de setembro de 2000 17:16 Para: [EMAIL PROTECTED] Assunto: access list is not working! why? here is a VERY simple access list i have put on a router that is providing our internet connection to prevent connections to www.radiowave.com and www.entrypoint.com(used to be pointcast): access-list 100 deny ip any host 206.64.127.11 log access-list 100 deny ip any host 64.37.194.196 log access-list 100 permit ip any any then on every interface i have put: ip access-group 100 in ip access-group 100 out yet this is not preventing the connections. can someone tell me why? the router this is on is the only link we have to the internet. this is very puzzling to me. thanks Beth __ Do You Yahoo!? Yahoo! Mail - Free email you can access from anywhere! http://mail.yahoo.com/ ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RES: Syslog acounting
Dear, With a Syslog Server you can do this. Youneedset aaa accounting and logging commands correctly. (at Cisco´s site you can find exemples!). good luck, -leonardo -Mensagem original-De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]Em nome de Henrique Issamu TeradaEnviada em: segunda-feira, 21 de agosto de 2000 18:50Para: [EMAIL PROTECTED]Assunto: Syslog acounting Hi list Can I do the accounting of history commands in a router just using a Syslog Server ? Or do I need a radius or tacacs+ , like a CiscoSecure? I'd like to use local authentication , and for each user, record the commands he had done in the router. The syslog Server is a 3CDaemon, from 3COM. thanks Henrique Issamu TeradaCPM Comunicações - BrazilCCNA Certified
RES: Telnet Problems
Stan, verify if is not there some access-list applied to filter telnet trafic (to some servers) through the router! Once I apllyed a a-list denying telnet access through the router and when I was telneting the router, it gets connection but do not prompt me the password´s request. Verify, this can be problem! good luck guy, Leonardo. -Mensagem original- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]Em nome de Rossetti, Stan Enviada em: quarta-feira, 26 de julho de 2000 16:36 Para: '[EMAIL PROTECTED]' Assunto: Telnet Problems To all, I have been trying to telnet to remote router (2501) and the connection is opened, but I never receive a password prompt. I telnetted to a directly connected router and did a "sh cdp neigh det" and the router is listed as a cisco neighbor. I believe telnet uses a layer 3 protocol (TCP/Port 23) and cdp operates at layer 2. What could be the problem??? Thanks, Stan Rossetti Russia Services Group Email: [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] Phone: (256) 544-5031 Beeper: 544-1183 pin # 0112 ... ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RES: how to block Media Player
Jim, If you configure the Media Player to not use HTTP, it will use port 1755. I think it´s only one way to do this: - Configure the media player to not use http and create a access-list denying all to use remote port 1755. *Without configuring the media player to do this, it will always use port 80. good luck, Leonardo. -Mensagem original- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]Em nome de Jim Bond Enviada em: segunda-feira, 24 de julho de 2000 23:17 Para: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Assunto: how to block Media Player Hello, My users access a lot of web sites running Media Player, how do I block it? Is there a port number associated with it? Thanks in advance. Jim __ Do You Yahoo!? Get Yahoo! Mail Free email you can access from anywhere! http://mail.yahoo.com/ ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: No debug over telnet
Type the "terminal monitor" command in the privileged EXEC mode to see the debugging. Leonardo. -Original Message- From: Omer [mailto:[EMAIL PROTECTED]] Sent: Tuesday, June 27, 2000 10:49 PM To: Cisco Group Study Subject: No debug over telnet Hello, I have noticed that although I can turn debugging on over a telnet connection, I cannot watch the debug information over a telnet connection to the router. I deduced that if you want to debug activities on the router you have to connect to it through the console port. If that is not true please let me know. Omer _NetZero Free Internet Access and Email__ http://www.netzero.net/download/index.html ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]