Stan,
verify if is not there some access-list applied to filter telnet trafic (to
some servers) through the router!
Once I apllyed a a-list denying telnet access through the router and when I
was telneting the router, it gets connection but do not prompt me the
password´s request.
Verify, this can be problem!
good luck guy,
Leonardo.
-----Mensagem original-----
De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]Em nome de
Rossetti, Stan
Enviada em: quarta-feira, 26 de julho de 2000 16:36
Para: '[EMAIL PROTECTED]'
Assunto: Telnet Problems
To all,
I have been trying to telnet to remote router (2501) and the connection is
opened, but I never receive a password prompt. I telnetted to a directly
connected router and did a "sh cdp neigh det" and the router is listed as a
cisco neighbor. I believe telnet uses a layer 3 protocol (TCP/Port 23) and
cdp operates at layer 2. What could be the problem???
Thanks,
Stan Rossetti
Russia Services Group
Email: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
Phone: (256) 544-5031
Beeper: 544-1183 pin # 0112
<<...>>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]