Re: NTP in an Enterprise Network
To minimise traffic on WAN links, point the ntp to the next hop router back towards the ntp server, then only the first router in a site needs to ntp across the WAN withothers syncing to it. Rob O'Brien CCNA Canberra Australia "Rossetti, Stan" wrote: You can also source off of the internal calendar clock if you have 7200 series router in your network and therefore would not need an NTP server. Thanks Stan Rossetti Russia Services Group Voice: (256) 544-5031 Email: [EMAIL PROTECTED] Beeper: 544-5031 pin 0112 CCDA, CCNA, CCSE -Original Message- From: SAM Meng Wai [mailto:[EMAIL PROTECTED]] Sent: Wednesday, December 06, 2000 1:12 AM To: [EMAIL PROTECTED] Subject:RE: NTP in an Enterprise Network You can setup an NTP Server on a unix machine and let all your routers sync to this NTP server by configure the following commands in your routers. Make sure you have a accurate timing in your server. ntp clock-period 17179860 ntp server 10.200.2.10 Hope this will ans your questions Rgds, Sam -Original Message- From: Circusnuts [SMTP:[EMAIL PROTECTED]] Sent: Tuesday, December 05, 2000 10:11 AM To: [EMAIL PROTECTED] Subject: NTP in an Enterprise Network Can anyone share NTP implementation successes in an Enterprise scenario. It's my latest assignment @ work I have a good idea what I want to accomplish, just looking for a some lessons learned. Thanks All !!! Phil _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Strange occurances in syslog
To everyone who replied, Thanks. As it turns out I had upgraded to 12.0(10)GD on the router and all of the other 2500's but didn't remember and as I don't have my e-mail at work (separate network) I couldn't check when posting. I will try the extra lines in the list as that definately makes sense. Will let you know how it goes. Rob O'Brien CCNA Canberra Australia "Williamson, Paul" wrote: I think its due to the processing of the access-list, and that the router is not bothering to look into the packet to check port number, because the access-list is matching the ip address if you try and specify further ie access-list 150 permit tcp any any eq 1234 log access-list 150 permit tcp any any eq 2334 log access-list 150 permit ip any any eq log HTH -Paul -Original Message----- From: Robert O'Brien [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 30, 2000 11:40 AM To: Murphy, Brian J SSI-ISET-31 Cc: [EMAIL PROTECTED] Subject: Re: Strange occurances in syslog Brian, I actually had it bothways. I was trying to see what was happening when one of our techs was trying to talk over ip to control a pabx. Thanks for the prompt reply. Rob. "Murphy, Brian J SSI-ISET-31" wrote: I have seen this before with inbound access lists..dont know why it is port 0, i beleive outbound access lists give the port numbers Brian -Original Message- From: Robert O'Brien [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 30, 2000 12:12 PM To: [EMAIL PROTECTED] Subject: Strange occurances in syslog Well I am stumped. The lines in the syslog from an "access-list 150 permit ip any any log" are not returning the port numbers, just a zero. This makes it very difficult to diagnose a traffic flow. This is being run on a 2500 series router with I think it was 12.07(T) IOS. Any suggestions or has any one seen this before?? Our other routers (all types of chassis including 2500's) seem to be okay normally, but this is not definate. Rob O'Brien CCNA Canberra Australia _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] PLEASE READ: The information contained in this e-mail is confidential and intended for the named recipient(s) only. If you are not an intended recipient of this email you must not copy, distribute or take any further action in reliance on it and you should delete it and notify the sender immediately. Email is not a secure method of communication and Nomura International plc cannot accept responsibility for the accuracy or completeness of this message or any attachment(s). Please check this e-mail for virus infection, for which Nomura International plc accepts no responsibility. If verification of this email is sought then please request a hard copy. Unless otherwise stated any views or opinions presented are solely those of the author and do not represent those of Nomura International plc. This email is intended for informational purposes only and is not a solicitation or offer to buy or sell securities or related financial instruments. Nomura International plc is regulated by the Securities and Futures Authority Limited and is a member of the London Stock Exchange. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCNP Switching 2.0
Donald, Also have a look in the archives over the last month as there has been quite a lot of discussion on this exam. Rob Donald Williams wrote: Have anyone taken the CCNP Switching 2.0 test? If so are ther a lot of multicasting questions on it? I'm using the Boson.com prep test and the one from Jason asks a lot of multicast questions. Thanks Don Williams CCNA, MCSE _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: BCMSN passed with 934, details inside
No I definately didn't have any in my exam, and I don't recall it in the course. "Wilson, Christian" wrote: I am looking at the exam outline, and it mentions DDR, LANE, and ATM. Is DDR really covered on this exam?? -Original Message- From: Robert O'Brien [SMTP:[EMAIL PROTECTED]] Sent: Wednesday, November 15, 2000 3:48 AM To: [EMAIL PROTECTED] Subject: Re: BCMSN passed with 934, details inside I found only limited product knowledge and a fair balance of spanning tree, VTP and Multi-cast. There was also a reasonably indepth dose on the MLS-SE and MLS-RP Hope this helps those yet to do the exam. By the way I was surprised with a result of 912 as I did not feel comfortable with my responses while doing the exam. Rob O'Brien Neal Rauhauser wrote: I took the BCMSN this afternoon and exited the testing center with a very surprising 934. Background: I have a couple of years time in grade with cat 19xx/28xx, about the same more recently with 29xx/35xx, and I once worked for three months on an incredibly psychotic Cat 5500 with 800 MACs in the cam and one subnet(!). I've also done one Cat 5500 + NFFC + RSM layer 3 deploy to an ISP with 40k worth of public IPs being routed through the switch. Study gear: I had two Cat 3524s running enterprise attached to a Cisco 2621 running 802.1Q VLANs in production at work. I had a loaner Cat 5000 with a Sup 1 and a ws-x5213 for the last few weeks of my studies. There was an idle 7206 in a remote facility that I used to brush up on mls rp commands. I did some multicast work with my 25xx collection at home. Study Materials: Didn't refer to Caslow once(!). The Cisco Press BCMSN book (only a few errors) and the official Cisco Press LAN switching were all I used. The LAN switching reference does an excellent job of covering some items that the BCMSN gives what I felt was a lightweight treatment. The boson.com pretests were *excellent* - my only gripe is that what is in boson's stuff is *way* harder than the real thing - I was getting mid 60% on the boson stuff and I thought I'd squeak by the exam ... the 934 was a huge surprise. What to watch for on the exam: I think the BCMSN question base is *very* broad. I've talked to folks that had to examine network sniffer traces and so forth and I saw none of that. The possible broadness being mentioned the details are ... Pound VTP operations into your head and do it twice for that stuff about version numbers. Use the same amount of effort on spanning tree and VLAN configuration issues. MLS is there but if you *understand* the BCMSN chapter on it and then read the Cisco Press LAN Switching you'll be fine. I am amazed at how little there was on multicast - knowing how to convert an IP address to a MAC address covered 50% of what I saw. This makes me think the exam question base is broad because I've talked to others who got a lot of multicast questions. I really got flogged on Cisco product line knowledge. I worked for an equipment dealership and I've troubleshot/tested/sold/refurbed everything Catalyst from 1912s to 65xx series include all of the layer 3 modules and I was streeetccchheddd by what the test wanted to know. I can eyeball a box full of Cat 5500/6500 cards and tell you part numbers and specs on them - I rarely need to refer to the fact Cisco product guide any more - and I was really reaching on some of this stuff. If my experience is represenative you should call 800-553-NETS and order DOC-CISCOCATALOG= and memorize the 55/6500 layer three stuff before approaching the exam. Well, thats all the wisdom I have to offer at the moment ... I am going to go pounce on CIT and see if I can be a CCNP by this time Friday .. I left the easiest exam for last :-) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCNP - Switching
I took the exam couple of weeks ago (how time flies when having fun) and yes you need definately to know your multicasting. Rob CCNA Canberra Australia Rude Net wrote: I just took this test last week, know your MulticastingRob -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Steve Dangerfield ([EMAIL PROTECTED]) Sent: Sunday, November 26, 2000 2:36 AM To: [EMAIL PROTECTED] Subject: CCNP - Switching Hi All, A quick Question, How much IP Multicasting is there on the Switching exam ? I've not done any multicasting in practice - should I be worrying about its content for the exam. Steve _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: annoying line after config t
Chuck, This should help. I currently work in a reasonable size network (for a private network any way) of some 200 network devices and remembering numbers or looking them up is a real pain. DNS lookups is MUCH easier on the grey matter. Also, if you use the following on all vty/console lines, the line you are typing will be immediately rewritten after a log line on the screen. This has the benifit of still seeing any debug lines or whatever, but still being able to read your commands. Router (config-line)# logging synchronous Robert O'Brien CCNA Canberra, Australia whatshakin wrote: You are exactly right. Perhaps your previous statement did not come out on paper as it did in your head...I quote "I suppose there are situations where you may want lookups -such as when you are using a host file so you can telnet to different routers using a pneumonic rather than an ip address" Lookups refers to DNS lookups I presume. Typically, one uses either hosts files or DNS to find name to address mappings, just not both at the same time. That said, I have used both methods simultaneously when troubleshooting various problems. The ip domain-lookup command will force your IOS to use DNS for name resoution. Your router will use the entries in the internal hosts file regardless of whether you have lookups enabled or not. - Original Message - From: Chuck Larrieu [EMAIL PROTECTED] To: whatshakin [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Saturday, November 25, 2000 10:45 AM Subject: RE: annoying line after config t Hhhmmm.. interesting food for thought. Coming from a background in small networks, I suppose my view is a bit limited. So let's see if I can discern why the domain lookup function even exists in the IOS. In reasonably well organized larger networks, folks run their own DNS internally. Network guys take advantage of the command ip name-server a.b.c.d to point the router to their DNS server, which in turn has been configured with router names and ip addresses. Makes telnetting around a bit easier, particularly when router names follow some logical convention. E.g. telnet BranchOffice or telnet 3rdfloor rather than the non-intuitive ip addresses Can you folks who work/have worked in such environments offer an opinion? Chuck -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of whatshakin Sent: Saturday, November 25, 2000 10:12 AM To: [EMAIL PROTECTED] Subject: Re: annoying line after config t The whole point of a hosts file is so you don't need lookups! - Original Message - From: Chuck Larrieu [EMAIL PROTECTED] To: Dennis Laganiere [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Saturday, November 25, 2000 9:27 AM Subject: RE: annoying line after config t Another one I recently have come across is the ip tcp synwait-time, which allows one to manually set the time the router waits for a tcp connection to become established. While the documentation states that the purpose is to allow for long wait times because of slow links, congestion, or slow response from hosts, and can also adjust the wait downwards, limiting the wait time for those domain lookups. Of course the no ip domain-lookup accomplishes the same thing.on the other hand, I suppose there are situations where you may want lookups - such as when you are using a host file so you can telnet to different routers using a pneumonic rather than an ip address. Chuck -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Dennis Laganiere Sent: Thursday, November 23, 2000 10:40 AM To: '[EMAIL PROTECTED]' Subject: annoying line after config t Isn't there a command to suppress the annoying "00:01:35: %SYS-5-CONFIG_i: Configured from console by console" line and dramatic pause every time you exit the config term? I was so happy to learn the "no ip domain-lookup" command to suppress the pause every time you mistype a command, but this one still stumps me. You help is appreciated. Thanks... - Dennis _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduc
Re: Policy routing as security - thoughts?
Chuck, As the area I work in is using this methodology, we are happy with it's traffic separation and security. The implementation we use is one lot of traffic uses a gre tunnel and policy mapping into and out of the tunnel at the ends. Rob O'Brien CCNA Canberra Australia. Chuck Larrieu wrote: I swear the digressions will be the death of me yet! I've been reading up on route-maps and policy routing. Got to thinking about something one of my associates at work said to me. He likes to use policy routing as a means of securing networks in extranet situations. You know - central site sells services to a number of unrelated partners. Sometimes even internet access. Of course, one can't allow customer A to see customer B's network, and visa versa. But both A and B should get to a particular service, be that a database, a server, internet access, or whatever. So my comrade throws in policy routing. Source addresses from whatever interface or source address are only permitted to proceed out a particular interface or to a particular destination IP. Sounds good on the surface. The question I have is the risk, particularly from spoofed addresses. I suppose that matching the source interface eliminates the address issue. Still, I gotta wonder My associate says this isn't an issue and that I worry too much. Anyone have any thoughts? Chuck -- I am Locutus, a CCIE Lab Proctor. Xx_Brain_dumps_xX are futile. Your life as it has been is over ( if you hope to pass ) From this time forward, you will study US! ( apologies to the folks at Star Trek TNG ) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Strange occurances in syslog
Well I am stumped. The lines in the syslog from an "access-list 150 permit ip any any log" are not returning the port numbers, just a zero. This makes it very difficult to diagnose a traffic flow. This is being run on a 2500 series router with I think it was 12.07(T) IOS. Any suggestions or has any one seen this before?? Our other routers (all types of chassis including 2500's) seem to be okay normally, but this is not definate. Rob O'Brien CCNA Canberra Australia _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Strange occurances in syslog
Brian, I actually had it bothways. I was trying to see what was happening when one of our techs was trying to talk over ip to control a pabx. Thanks for the prompt reply. Rob. "Murphy, Brian J SSI-ISET-31" wrote: I have seen this before with inbound access lists..dont know why it is port 0, i beleive outbound access lists give the port numbers Brian -Original Message----- From: Robert O'Brien [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 30, 2000 12:12 PM To: [EMAIL PROTECTED] Subject: Strange occurances in syslog Well I am stumped. The lines in the syslog from an "access-list 150 permit ip any any log" are not returning the port numbers, just a zero. This makes it very difficult to diagnose a traffic flow. This is being run on a 2500 series router with I think it was 12.07(T) IOS. Any suggestions or has any one seen this before?? Our other routers (all types of chassis including 2500's) seem to be okay normally, but this is not definate. Rob O'Brien CCNA Canberra Australia _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: BCMSN passed with 934, details inside
I found only limited product knowledge and a fair balance of spanning tree, VTP and Multi-cast. There was also a reasonably indepth dose on the MLS-SE and MLS-RP Hope this helps those yet to do the exam. By the way I was surprised with a result of 912 as I did not feel comfortable with my responses while doing the exam. Rob O'Brien Neal Rauhauser wrote: I took the BCMSN this afternoon and exited the testing center with a very surprising 934. Background: I have a couple of years time in grade with cat 19xx/28xx, about the same more recently with 29xx/35xx, and I once worked for three months on an incredibly psychotic Cat 5500 with 800 MACs in the cam and one subnet(!). I've also done one Cat 5500 + NFFC + RSM layer 3 deploy to an ISP with 40k worth of public IPs being routed through the switch. Study gear: I had two Cat 3524s running enterprise attached to a Cisco 2621 running 802.1Q VLANs in production at work. I had a loaner Cat 5000 with a Sup 1 and a ws-x5213 for the last few weeks of my studies. There was an idle 7206 in a remote facility that I used to brush up on mls rp commands. I did some multicast work with my 25xx collection at home. Study Materials: Didn't refer to Caslow once(!). The Cisco Press BCMSN book (only a few errors) and the official Cisco Press LAN switching were all I used. The LAN switching reference does an excellent job of covering some items that the BCMSN gives what I felt was a lightweight treatment. The boson.com pretests were *excellent* - my only gripe is that what is in boson's stuff is *way* harder than the real thing - I was getting mid 60% on the boson stuff and I thought I'd squeak by the exam ... the 934 was a huge surprise. What to watch for on the exam: I think the BCMSN question base is *very* broad. I've talked to folks that had to examine network sniffer traces and so forth and I saw none of that. The possible broadness being mentioned the details are ... Pound VTP operations into your head and do it twice for that stuff about version numbers. Use the same amount of effort on spanning tree and VLAN configuration issues. MLS is there but if you *understand* the BCMSN chapter on it and then read the Cisco Press LAN Switching you'll be fine. I am amazed at how little there was on multicast - knowing how to convert an IP address to a MAC address covered 50% of what I saw. This makes me think the exam question base is broad because I've talked to others who got a lot of multicast questions. I really got flogged on Cisco product line knowledge. I worked for an equipment dealership and I've troubleshot/tested/sold/refurbed everything Catalyst from 1912s to 65xx series include all of the layer 3 modules and I was streeetccchheddd by what the test wanted to know. I can eyeball a box full of Cat 5500/6500 cards and tell you part numbers and specs on them - I rarely need to refer to the fact Cisco product guide any more - and I was really reaching on some of this stuff. If my experience is represenative you should call 800-553-NETS and order DOC-CISCOCATALOG= and memorize the 55/6500 layer three stuff before approaching the exam. Well, thats all the wisdom I have to offer at the moment ... I am going to go pounce on CIT and see if I can be a CCNP by this time Friday .. I left the easiest exam for last :-) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCNP Preparation library
From the response I have seen on the various websites, this may be slow in becoming readily available. I know it is not due in Australia till end of December early Jan. Rob O'Brien Krishna Shankar wrote: no still it is not available - Original Message - From: Amit Gupta (EHPT) IS-IT To: '[EMAIL PROTECTED]' Sent: Monday, November 13, 2000 6:39 PM Subject: CCNP Preparation library Hi everybody, Is the CCNP Prep Library ( 2nd Edition ) from Cisco Press available in bookstores in US ? Thanks Regards Amit _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Passed Switch Exam
Jason, Used the Thomas II book BCMSN and it's associated tests. You do have to watch and check your answers as both the CD and book contain errors. eg the book will ask a question to which you may answer C. show mls entry and the answers will say A. show mls entry. Other than that I used the course notes, personal experience, tests on cisco site, plus info from discussions on this group. Good luck. Robert. Jason Baker wrote: Hi Robert, a am bout to sit switching exam.. what tests did u use to practice ? Regards, Jason Baker Network Engineer MCSE, CCNA -Original Message- From: Robert O'Brien [mailto:[EMAIL PROTECTED]] Sent: Monday, November 13, 2000 4:55 PM To: [EMAIL PROTECTED] Subject: Passed Switch Exam One down three to go. The group discussions and bits 'n' pieces helped. Rob O'Brien CCNA Canberra, Australia _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Passed Switch Exam
One down three to go. The group discussions and bits 'n' pieces helped. Rob O'Brien CCNA Canberra, Australia _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCNP books
I to am interested to hear peples thoughts on the cisco press books for CCNP as the archives only really had the Thomas II books covered. Did any one find any improvement in those Thomas II books such as BSCN as the others copped a bagging??? Thanks Rob O'Brien CCNA Canberra Australia Study Cisco wrote: Hi all I am looking for good books of CCNP Can any one help me in the same The books which are mentioned are they good books from Cisco Press Building Cisco Multilayer Switched Networks ( BCMSN ) 605-504 - Cisco Press Building Cisco Remote Access Networks ( BCRAN ) 605-505 - Cisco Press Cisco Internetworking Troubleshooting ( CIT ) 605-506- Cisco Press __ Do You Yahoo!? Yahoo! Messenger - Talk while you surf! It's FREE. http://im.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Recommended Books for BCMSN BCRAN
Kevin, In the archives of September and October the Thomas II books you mention both got a hammering for the number of mistakes they contained and the lower standards than experienced in the earlier series of books. Rob CCNA Canberra Australia Kevin wrote: Please comment whether the books mentioned are enough/good for the examinations. - BCMSN : Building Cisco Multilayer Switching Networks / Thomas M. Thomas II, John C. Bass, James E. Robinson III (McGraw-Hill) - BCRAN : Building Cisco Remote Access Networks / Thomas M. Thomas II, Adam Quiggle (McGraw-Hill) Thanks. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Recommended Books for BCMSN BCRAN
Kevin, In the archives of September and October the Thomas II books you mention both got a hammering for the number of mistakes they contained and the lower standards than experienced in the earlier series of books. Rob CCNA Canberra Australia Kevin wrote: Please comment whether the books mentioned are enough/good for the examinations. - BCMSN : Building Cisco Multilayer Switching Networks / Thomas M. Thomas II, John C. Bass, James E. Robinson III (McGraw-Hill) - BCRAN : Building Cisco Remote Access Networks / Thomas M. Thomas II, Adam Quiggle (McGraw-Hill) Thanks. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCNP books
I to am interested to hear peoples thoughts on the cisco press books for CCNP as the archives only really had the Thomas II books covered. Did any one find any improvement in those Thomas II books such as BSCN as the others copped a bagging??? Thanks Rob O'Brien CCNA Canberra Australia Study Cisco wrote: Hi all I am looking for good books of CCNP Can any one help me in the same The books which are mentioned are they good books from Cisco Press Building Cisco Multilayer Switched Networks ( BCMSN ) 605-504 - Cisco Press Building Cisco Remote Access Networks ( BCRAN ) 605-505 - Cisco Press Cisco Internetworking Troubleshooting ( CIT ) 605-506- Cisco Press __ Do You Yahoo!? Yahoo! Messenger - Talk while you surf! It's FREE. http://im.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Recommended Books for BCMSN BCRAN
Kevin, I am still hunting, that is how I knew about the stuff in the archives. Hopefully someone else in the group has some thoughts, but I may go the cisco press CCNP Prep library 1587050137 when it is available. I have heard the Sybex stuff is supposed to be OK. Sorry I couldn't help more. Robert Kevin wrote: Robert, First, thank you very much for your advise. You just mentioned the two Thomas books are not adequate, then what kind of books do you recommend for the above two subjects? Cisco Press? Sybex? Or ? Thanks, Kevin "Robert O'Brien" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Kevin, In the archives of September and October the Thomas II books you mention both got a hammering for the number of mistakes they contained and the lower standards than experienced in the earlier series of books. Rob CCNA Canberra Australia Kevin wrote: Please comment whether the books mentioned are enough/good for the examinations. - BCMSN : Building Cisco Multilayer Switching Networks / Thomas M. Thomas II, John C. Bass, James E. Robinson III (McGraw-Hill) - BCRAN : Building Cisco Remote Access Networks / Thomas M. Thomas II, Adam Quiggle (McGraw-Hill) Thanks. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Restart delay
Can some one give me a reference that deals with this feature and what it actually does?? I couldn't find it on the CD. Or else just let me know what it is and does would be great. Rob O'Brien CCNA Canberra, Australia **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Fibre hub with port security
Need some help, I am after a replacement for some 3Com hubs. The main thing is fibre connections and port security. Any suggestions appreciated. Rob O'Brien CCNA Canberra, Australia **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
