Re: ip classless
Wrong. ip classless allows a router receiving a packet it doesn't know how to forward (unrecognized subnet and no default route in the routing table) to choose the best supernet to forward it finally. Otherwise with no ip classless, the packet is discarded. cvp ccnp, ccda "Yee, Jason" [EMAIL PROTECTED] on 08/22/2000 05:22:30 PM Please respond to "Yee, Jason" [EMAIL PROTECTED] To: "'[EMAIL PROTECTED]'" [EMAIL PROTECTED] cc:(bcc: Claude-Vincent PEREZ/JP-TOKYO-HOLDING/LVMH) Subject: ip classless hi guys, ip classless is for routing protocols to advertise subnets whereas no ip classless is for routing protocols not to advertise subnet info Am I right in saying that? thanks Jason ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: how to limit the speed
For ethernet media, the bandwidth is fixed. bandwidth command at the int. is just informational. Could be used by IGRP as parameter to calculate the metric advertised. cvp ccnp, ccda "gary" [EMAIL PROTECTED] on 08/23/2000 11:42:12 AM Please respond to "gary" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc:(bcc: Claude-Vincent PEREZ/JP-TOKYO-HOLDING/LVMH) Subject: how to limit the speed hi guys: anyone can tell me how to limit the ethernert speed at 64k in Cisco router hi guys: anyone can tell me how to limit the ethernert speed at 64k in Cisco router
Terminal server
Hi all, Can someone tell me whether it's possible to use the aux port connected to the console port of another cisco router? I tried the same conf as if I was using the asyn port but it failed. (transport input all, no exec) Thanks, cvp. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Any change in the Material for Cisco's Remote Access and Support paper?
I have just passed the Remote access2.0 exam and was surprised to see on the title bar BCRAN1.0!!! After a short investigation, I realized that there were no changement. The objectives on cco for this new exam are not so accurate. Lots of questions on x.25 and asynchronous conf.!@#$ VoIP, DMZ...forget it! cvp "Sim, CT (Chee Tong)" [EMAIL PROTECTED] on 08/16/2000 03:10:05 PM Please respond to "Sim, CT (Chee Tong)" [EMAIL PROTECTED] To: "'[EMAIL PROTECTED]'" [EMAIL PROTECTED] cc:(bcc: Claude-Vincent PEREZ/JP-TOKYO-HOLDING/LVMH) Subject: Any change in the Material for Cisco's Remote Access and Support paper? Dear all, I knew that the CCNP have changed Version. The four subject are now 1.Routing 2.Swtiching 3.Remote Access 4.Support I knew that For Routing and Switching, there are new cisco press book for the two subject Routing-Building Scalable Cisco Networks Switching-Building Multilayered Cisco Switched Networks But for Remote Access and Support, are they still using the same book called Building Cisco Remote Access Network and Cisco Internetwork Trobleshooting == De informatie opgenomen in dit bericht kan vertrouwelijk zijn en is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en de afzender direct te informeren door het bericht te retourneren. == The information contained in this message may be confidential and is intended to be exclusively for the addressee. Should you receive this message unintentionally, please do not use the contents herein and notify the sender immediately by return e-mail. == ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Terminal server
Thank you but when I do a reverse telnet... After the "debug telnet" command, here is what I got: 2501#telnet 172.16.1.1 2001 Trying 172.16.1.1, 2001 ... Open 00:16:52: Telnet1: 1 1 251 1 00:16:52: TCP1: Telnet sent WILL ECHO (1) 00:16:52: Telnet1: 2 2 251 3 00:16:52: TCP1: Telnet sent WILL SUPPRESS-GA (3) 00:16:52: Telnet1: 8 8 253 24 00:16:52: TCP1: Telnet sent DO TTY-TYPE (24) 00:16:52: Telnet1: 1000 1000 253 31 00:16:52: TCP1: Telnet sent DO WINDOW-SIZE (31) 00:16:52: Telnet0: Sent SB NAWS 80 24 00:16:52: TCP1: Telnet received DO ECHO (1) 00:16:52: TCP1: Telnet received DO SUPPRESS-GA (3) 00:16:52: TCP1: Telnet received WONT TTY-TYPE (24) 00:16:52: TCP1: Telnet sent DONT TTY-TYPE (24) 00:16:52: TCP1: Telnet received WILL WINDOW-SIZE (31) 00:16:52: Telnet1: recv SB NAWS 80 24 2501#sh sessio Conn HostAddress Byte Idle Conn Name * 1 172.16.1.1 172.16.1.1 0 0 172.16.1.1 172.16.1.1 is my loopback interface on the terminal server. TTY line=1 Help.. [EMAIL PROTECTED] on 08/16/2000 03:48:50 PM Please respond to [EMAIL PROTECTED] To: Claude-Vincent PEREZ/JP-TOKYO-HOLDING/LVMH@LVMH, [EMAIL PROTECTED] cc: Subject: RE: Terminal server Hello I have a line aux 0 transport input all that works ok for my terminal server; the only thing you should be careful about is to check for the async line number assigned to the AUX line ( use #sh line) Good luck --- Gabriel Neagoe, GN379-RIPE Networking solutions consultant Cisco product manager, CCNP, CCDA ST Romania tel: +401 20 40 300 fax: +401 20 40 310 --- -Original Message- From: [EMAIL PROTECTED] [SMTP:[EMAIL PROTECTED]] Sent: Wednesday, August 16, 2000 8:52 AM To: groupstudy Subject: Terminal server Hi all, Can someone tell me whether it's possible to use the aux port connected to the console port of another cisco router? I tried the same conf as if I was using the asyn port but it failed. (transport input all, no exec) Thanks, cvp. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Terminal server
2501#sh line Tty Typ Tx/Rx A Modem Roty AccO AccI UsesNoise Overruns * 0 CTY -- --- 250/0 1 AUX 9600/9600 -- --- 200/0 2 VTY -- --- 200/0 3 VTY -- --- 000/0 4 VTY -- --- 000/0 5 VTY -- --- 000/0 6 VTY -- --- 000/0 [EMAIL PROTECTED] on 08/16/2000 06:28:59 PM To: Claude-Vincent PEREZ/JP-TOKYO-HOLDING/LVMH@LVMH, [EMAIL PROTECTED] cc: [EMAIL PROTECTED] Subject: RE: Terminal server what do "#show line" result ? --- Gabriel Neagoe, GN379-RIPE Networking solutions consultant Cisco product manager, CCNP, CCDA ST Romania tel: +401 20 40 300 fax: +401 20 40 310 --- -Original Message- From: [EMAIL PROTECTED] [SMTP:[EMAIL PROTECTED]] Sent: Wednesday, August 16, 2000 11:44 AM To: [EMAIL PROTECTED] Cc: groupstudy Subject: RE: Terminal server Thank you but when I do a reverse telnet... After the "debug telnet" command, here is what I got: 2501#telnet 172.16.1.1 2001 Trying 172.16.1.1, 2001 ... Open 00:16:52: Telnet1: 1 1 251 1 00:16:52: TCP1: Telnet sent WILL ECHO (1) 00:16:52: Telnet1: 2 2 251 3 00:16:52: TCP1: Telnet sent WILL SUPPRESS-GA (3) 00:16:52: Telnet1: 8 8 253 24 00:16:52: TCP1: Telnet sent DO TTY-TYPE (24) 00:16:52: Telnet1: 1000 1000 253 31 00:16:52: TCP1: Telnet sent DO WINDOW-SIZE (31) 00:16:52: Telnet0: Sent SB NAWS 80 24 00:16:52: TCP1: Telnet received DO ECHO (1) 00:16:52: TCP1: Telnet received DO SUPPRESS-GA (3) 00:16:52: TCP1: Telnet received WONT TTY-TYPE (24) 00:16:52: TCP1: Telnet sent DONT TTY-TYPE (24) 00:16:52: TCP1: Telnet received WILL WINDOW-SIZE (31) 00:16:52: Telnet1: recv SB NAWS 80 24 2501#sh sessio Conn HostAddress Byte Idle Conn Name * 1 172.16.1.1 172.16.1.1 0 0 172.16.1.1 172.16.1.1 is my loopback interface on the terminal server. TTY line=1 Help.. [EMAIL PROTECTED] on 08/16/2000 03:48:50 PM Please respond to [EMAIL PROTECTED] To: Claude-Vincent PEREZ/JP-TOKYO-HOLDING/LVMH@LVMH, [EMAIL PROTECTED] cc: Subject: RE: Terminal server Hello I have a line aux 0 transport input all that works ok for my terminal server; the only thing you should be careful about is to check for the async line number assigned to the AUX line ( use #sh line) Good luck --- Gabriel Neagoe, GN379-RIPE Networking solutions consultant Cisco product manager, CCNP, CCDA ST Romania tel: +401 20 40 300 fax: +401 20 40 310 --- -Original Message- From: [EMAIL PROTECTED] [SMTP:[EMAIL PROTECTED]] Sent: Wednesday, August 16, 2000 8:52 AM To: groupstudy Subject: Terminal server Hi all, Can someone tell me whether it's possible to use the aux port connected to the console port of another cisco router? I tried the same conf as if I was using the asyn port but it failed. (transport input all, no exec) Thanks, cvp. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Preventing password recovery
The config-register 0x102 prevent it. cvp Dennis Laganiere [EMAIL PROTECTED] on 08/10/2000 02:10:45 AM Please respond to Dennis Laganiere [EMAIL PROTECTED] To: "'Michael Fountain'" [EMAIL PROTECTED], [EMAIL PROTECTED] cc:(bcc: Claude-Vincent PEREZ/JP-TOKYO-HOLDING/LVMH) Subject: RE: Preventing password recovery Lock the door... - Dennis -Original Message- From: Michael Fountain [mailto:[EMAIL PROTECTED]] Sent: Wednesday, August 09, 2000 5:08 AM To: [EMAIL PROTECTED] Subject: Preventing password recovery We have a cisco router (1720) at a customers location. The customer's techs have used the password recovery procedure to get into the router and look at the configs and change the passwords in them. Does anyone know how can we prevent the router from responding to a break during boot? Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCIE Written Passed
I would be pleased also to know it. I'll pass it in 2 weeks. Thank you very much cvp Luan Kim [EMAIL PROTECTED] on 08/09/2000 05:47:55 AM Please respond to Luan Kim [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: [EMAIL PROTECTED] (bcc: Claude-Vincent PEREZ/JP-TOKYO-HOLDING/LVMH) Subject: Re: CCIE Written Passed Hi Rich, I'm taking my ccie-written next week. Would you share some notes with me please? Thanks in advance. Luan T. Kim, MCSE, CCNA* Systems/Network Infrastructure Engineer* MP3.COM, INC. http://www.mp3.com * Phone: 858-623-7341Cell: 858-382-3055 * Fax: 858-623-7400Email: [EMAIL PROTECTED] * On Tue, 8 Aug 2000 [EMAIL PROTECTED] wrote: Well, I finally passed with a 72%. Not great but it was above the 70 required. I will soon post my study materials and other related information on my website www.thetestpage.net This is diffinetly possible for anyone. 1 year ago I'd never touched a router. So don't give up. Remember that a great deal of the questions are trick questions. Have fun Rich Russell www.thetestpage.net Get your free email from AltaVista at http://altavista.iname.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
PAP
Does someone know when PAP is preferred to CHAP? Thank you, cvp. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Hang on Cisco Documentation
If you're using a proxy server, be sure that the ip address 127.0.0.1 doesn't use it. cvp [EMAIL PROTECTED] (John Nemeth) on 07/26/2000 04:57:24 PM Please respond to [EMAIL PROTECTED] (John Nemeth) To: "myccie Lian" [EMAIL PROTECTED], [EMAIL PROTECTED] cc:(bcc: Claude-Vincent PEREZ/JP-TOKYO-HOLDING/LVMH) Subject: Re: Hang on Cisco Documentation On Dec 9, 5:49pm, "myccie Lian" wrote: } } My PC is Win98 after I installed cisco documentation CD and launch CD. } Sometimes it works that I can access the CD but sometimes when I click } on a } link it appear "Connect: host 127.0.0.1:8080 contacted. Waiting for } reply". } It hang there forever. I have tried Netscape(come with cisco) and IE I have found that some "firewalling" software can cause this kind of problem. Are you using any kind of "firewalling" software? }-- End of excerpt from "myccie Lian" ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: console omnistack 4024
The cable console is a simple DB9 F/M gender (-serial port). By default, it is set to 9600bps, 8 data bits, none parity, one stop bit. Hope this may help you, cvp. rudhy [EMAIL PROTECTED] on 07/25/2000 10:12:49 PM Please respond to rudhy [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc:(bcc: Claude-Vincent PEREZ/JP-TOKYO-HOLDING/LVMH) Subject: console omnistack 4024 I have a problem with console omnistack 4024 xylan, can you help me how to set configure port setting ? how speed, parity , flow control. and how the cable console connectivity . thanks. best regards. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: BCMSN question
Actually, I am preparing for the switching2.0 exam, already got the ccna2.0 and Routing2.0. Routing2.0 only focus on the routing protocol such as ospf, eigrp and bgp4 (+vlsm), more than v.1(byebye appeltalk and ipx) I feel switching2.0 exam different from clsc and only work online with cisco website. For the other exams, I don't feel any sigificant changes. Yours, cvp. "Wisin Suhendra Setiady" [EMAIL PROTECTED] on 07/25/2000 09:51:06 AM Please respond to "Wisin Suhendra Setiady" [EMAIL PROTECTED] To: "'Brian'" [EMAIL PROTECTED] cc: [EMAIL PROTECTED], [EMAIL PROTECTED] (bcc: Claude-Vincent PEREZ/JP-TOKYO-HOLDING/LVMH) Subject: RE: BCMSN question No, I don't mean it, and I know exactly that the one from CiscoPress is the best. Because I refer the BCMSN to the new test version 2.0. And the previous version would be called CLSC. So there are new things included to BCMSN version 2.0. That's why I think it would be better to wait for the new version rather than buying the old version. It's only my oppinion concerning this, and I am just wondering if there are significant changes in CCNP version 2.0? Thanks for you comments. With Sincerity, Wisin http://www.ciscosite.com -Original Message- From: Brian [mailto:[EMAIL PROTECTED]] Sent: Monday, July 24, 2000 8:36 PM To: Wisin Suhendra Setiady Cc: 'Helena LOW'; [EMAIL PROTECTED] Subject: RE: BCMSN question CiscoPress makes a BCMSN book.are you saying that book is no good for using on the BCMSN test? The CiscoPress BCMSN is the book I am using to prepare for the CCNP 2.0 BCMSN test. Brian On Mon, 24 Jul 2000, Wisin Suhendra Setiady wrote: I think this could be a choice: http://www.amazon.com/exec/obidos/ASIN/0072124741/wisinshomesweeth Rather waiting for the coming one. Right now the CiscoPress is still the best http://www.amazon.com/exec/obidos/ASIN/1578702070/wisinshomesweeth But it's too late if for taking the exam. ISL encapsulation 6506 set trunk slot_number/port_number on isl 1-1005 set port duplex full set port speed 100 2924 interface FastEthernet0/port_number duplex full speed 100 switchport mode trunk With Sincerity http://www.ciscosite.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Helena LOW Sent: Monday, July 24, 2000 9:23 AM To: [EMAIL PROTECTED] Subject: BCMSN question Hi, I was wondering if someone could tell me how indepth we need to know the material in the Cisco press book of BCMSN? When I was studying for my CCNA, I mostly used Todd's book which was enough, but I did take a look at the Cisco Press book for CCNA and it was really indepth..I was wondering if this is the case for the BCMSN book? Like would we need to know the fields of ISL encapsulation? Thanks Helena ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCIE - Austin, TX
Good point but you don't judge it as well as you don't understand the french history... cvp michael wedel-durrow [EMAIL PROTECTED] on 07/21/2000 06:21:36 AM Please respond to michael wedel-durrow [EMAIL PROTECTED] To: Bill Fenech [EMAIL PROTECTED], groupstudy [EMAIL PROTECTED] cc:(bcc: Claude-Vincent PEREZ/JP-TOKYO-HOLDING/LVMH) Subject: Re: CCIE - Austin, TX dear Bill: i was speaking from my experience and limited knowlege. the french exchange students i have known have been befuddled by our american racial politics. as for the algerian situation, i don't claim to understand what's going on but that seems to me to be based on religious intolerance on both sides (not any better than racial intolerance, i agree) Still Your Friend, mic Bill Fenech wrote: Yeah, right, that's why they get along with Algerians so well - Original Message - From: "michael wedel-durrow" [EMAIL PROTECTED] To: "Chuck Larrieu" [EMAIL PROTECTED]; "groupstudy" [EMAIL PROTECTED] Sent: Thursday, July 20, 2000 7:36 AM Subject: Re: CCIE - Austin, TX yes, but my experience with the french is that to them race is insignifigant. Chuck Larrieu wrote: I too checked the dictionary on this one. It is true the word is of Scandinavian / old English origin, and has perhaps been in the language for 1500 years, well before the Danes, the Norse, the Saxons and the Angles had any contact with sub-Saharans. That said, the word became politically incorrect here in the US because of the similarity to a particular racial epithet, and has generally fallen out of favor as a result. Them Frenchies, on the other hand, have fewer hangups of these sorts. I am inclined to believe that the French in general discriminate based upon ability to speak pure Parisian. The worse your accent, the further down the food chain you are, socially speaking. Chuck -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Deane, James Sent: Thursday, July 20, 2000 10:31 AM To: 'michael wedel-durrow'; ElephantChild; groupstudy Subject:RE: CCIE - Austin, TX Before this gets out of hand, the following is pasted from the From the Miriam Webster web site (www.m-w.com) Main Entry: nig·gard·ly Pronunciation: -lE Function: adjective Date: 1571 1 : grudgingly mean about spending or granting : BEGRUDGING 2 : provided in meanly limited supply synonym see STINGY - nig·gard·li·ness noun - niggardly adverb I'm sure EC meant no harm in this other than to throw around a 10 dollar word. Jim -Original Message- From: michael wedel-durrow [mailto:[EMAIL PROTECTED]] Sent: Thursday, July 20, 2000 4:07 AM To: ElephantChild; groupstudy Subject: Re: CCIE - Austin, TX EC: you used a very ugly racial epethet. please show us that you're not so stupid that you can't find a more appropriate choice of words. mic ElephantChild wrote: On Thu, 20 Jul 2000, Raymond Thomas wrote: First we had words like rabblecroot, now...persnickety?? LOL, I know what you mean though. Next thing you know, someone's going to complain about HR niggardliness. :-) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Chuck Larrieu Sent: Thursday, July 20, 2000 3:49 PM Some recruiters wonder why we techies get so persnickety. :- -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Starry Eyes Sent: Thursday, July 20, 2000 7:07 AM Why do I not have a warm fuzzy about this offer? Maybe because I am not a certificated [sic] CCIE? (corpus delicti snippicated.) -- Bungee jumping and skydiving are for wimps. If you want to experience true gut-wrenching terror, have children. --Dusty Rhoades. ___ To unsubscribe from the Jobs list, send a message to [EMAIL PROTECTED] with the body containing: unsubscribe jobs ___ To unsubscribe from the Jobs list, send a message to [EMAIL PROTECTED] with the body containing: unsubscribe jobs ___ To unsubscribe from the Jobs list, send a message to [EMAIL PROTECTED] with the body containing: unsubscribe jobs micwedel.vcf
RE: ACRC Vs. BSCN
I passed it also last WE. Add with it VLSM which takes 3/4 of the last one. Any feedbacks about the Switching 2.0 exam? cvp Dennis Laganiere [EMAIL PROTECTED] on 07/19/2000 03:04:55 AM Please respond to Dennis Laganiere [EMAIL PROTECTED] To: "'Eddie O Leary (EEI)'" [EMAIL PROTECTED], "'[EMAIL PROTECTED]'" [EMAIL PROTECTED] cc:(bcc: Claude-Vincent PEREZ/JP-TOKYO-HOLDING/LVMH) Subject: RE: ACRC Vs. BSCN Bridging, IPX, Appletalk, remote access and ISDN have been dropped. Focus on BGP, OSPF, EIGRP for three quarters of the test. I passed it last week, so I know you can do it. :-) - Dennis -Original Message- From: Eddie O Leary (EEI) [mailto:[EMAIL PROTECTED]] Sent: Tuesday, July 18, 2000 10:53 AM To: '[EMAIL PROTECTED]' Subject: ACRC Vs. BSCN A Chairde, Are there big differences in these exams , or are based on same lines I.E OSPF,EIGRP,ISDN Etc. Slan / Ed ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Windows based sniffer
I don't understand the name of the Web server?! cvp Dinesh_Kakkar [EMAIL PROTECTED] on 07/19/2000 04:31:23 PM Please respond to Dinesh_Kakkar [EMAIL PROTECTED] To: Oscar Rau [EMAIL PROTECTED], Cisco GroupStudy [EMAIL PROTECTED], "'[EMAIL PROTECTED]'" [EMAIL PROTECTED] cc:(bcc: Claude-Vincent PEREZ/JP-TOKYO-HOLDING/LVMH) Subject: RE: Windows based sniffer Try LanGuard its available here http://nww1.com/go/1454550a.html -- From: [EMAIL PROTECTED][SMTP:[EMAIL PROTECTED]] Reply To:[EMAIL PROTECTED] Sent: Wednesday, July 19, 2000 12:54 PM To: Oscar Rau; Cisco GroupStudy Subject: Re: Windows based sniffer On Dec 5, 3:23am, Oscar Rau wrote: } } I am looking for a good windows based sniffer. I heard about Network Generals } sniffer but I could not find the link to it. If you have the URL, would you please } pass it on to me? If there other good sniffer products please let me know. It would be helpful if you specified the features you needed. However, for simple packet capture and decoding, I generally use WinDump, which is a port of tcpdump from UNIX. You can find it at: http://netgroup-serv.polito.it/windump/ }-- End of excerpt from Oscar Rau ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: IP SUBNET-ZERO
Strongly discouraged as all ones ip-subnet. Otherwise, you'd refer to the classfull address. cvp ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCNA 2.0 passing score?
822 cvp ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Switching 2.0 module
Does anyone have some more detailed information about the Switching 2.0 exam? seems to be really different from the clsc exam but how much? cvp ccna ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
