RE: hsrp & isl trunking [7:57896]
The way we have it is 2 routers connected to the 4000 switch with 4 vlans on the switch. Have set up 4 subinterfaces on each router, 1 for each van. Each with a separate ip address corresponding to the vlan number. We have 2 HSRP groups set up with 2 vlans in each group. 1 router will be the active for 1 group (2 of the vlans) and the other router will be the active for the other group (2 vlans). On each subinterface for each router for each vlan, it has a unique virtual HSRP IP address. I originally thought that all would use the same virtual HSRP IP address. You are saying that there should be 4 groups (1 for each vlan) instead of the 2 groups that we have?? Or is it OK with 2 groups and the 4 unique virtual HSRP IP addresses on each router?? This type of setup wasn't covered together in our class, just vlans and HSRP seperately. But in this lab we have Vlans running thru HSRP router doing ISL trunking and the routers are also running BGP and EIGRP to connect to a remote router. AHHH! Thanks for your help. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=58138&t=57896 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: hsrp & isl trunking [7:57896]
Come on, anyone?? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=58093&t=57896 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
hsrp & isl trunking [7:57896]
In my Cisco Academy class, we are doing an lab with a lot of different topics rolled into one lab. We have 2 routers set up with hsrp and has a virtual ip address. Now a 4000 switch has 4 vlans configured on it and to use isl trunking to the hsrp routers. These routers have 4 subinterfaces on the fastethernet port going to the switch (one subinterface per vlan on each router). On the 4000 switch we set up a default gateway to the hsrp virtual ip address. But on the hsrp routers when we set up the subinterfaces and enter the standby command for the virtual ip address, I thought that we use the hsrp virtual ip address but the instructor says no. She says we need to put in the vlan number as part of the virtual ip address. Example: subinterface number for vlan 20...Fa0/0.20, ip address...10.200.20.2, standby ip address...10.200.20.1. And for vlan 30 it would be 10.200.30.1 for the virtual ip address. I thought that all subinterfaces would use the same hsrp virtual ip address. I tried to find more info on the Cisco site, but could not. Is this actually correct?? Why would the virtual ip address be different for each vlan?? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=57896&t=57896 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Switching VTP [7:55438]
A correction. The command SHOW SPANNING-TREE is issued a IOS based switch such as the 2900, not 4000. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55439&t=55438 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Switching VTP [7:55438]
I'm in semester 7 of the Cisco Academy program and one subject is not clear. This is the VTP revision number that is sent out between switches. Normally the number increments to indicate the most current information to that switch. And when you are introducing a used switch into your network you have to reset the number to 0. That's the sticking point, how to reset it. The official academy text say to power cycle the switch to reset the revision number. A student who works with these says the same. But on the Cisco web site it says to change the domain name and then change it back to reset the number. The Cisco Press certification guide says to change the mode to transparent then to server. Or it says to change the domain name and change it back. Or it says to issue the CLEAR CONFIG ALL command (on set based switches) to clear the VTP info and the revision number. Also, when you issue the command SHOW SPANNING-TREE on a 4000 series switch it gives a listing of the different ports and information about those ports. EXAMPLE: INTERFACE FA0/1 (port 13) in spanning tree 1 is FORWARDING My question is, what is the (port 13) to mean?? The actual port on the switch is port 1, not 13. Each interface has a number that seems to increment but INT FA0/12 is (port 25) where if they incremented correctly it would be (port 24). The info says it's a designated port. What?? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55438&t=55438 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: simulations questions [7:53662]
It depends on the pool of questions that you get. On my BCRAN exam, I had 1 drag and drop, several that gave a list of commands and you had to pick from those to answe the question and 1 where I had to cofigure frame relay on the fly. Others have said that they had more of the drag and drop type and less of the others. Some say they had more of the configure type questions. Best to be prepared for all situations. If you know the material, it will be easy. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53751&t=53662 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCNP exam [7:53668]
You're right about the IS-IS part. Our instructor in my BCMSN class brought that up just last week. Also for the new exams, there are simulation and drag and drop type questions. On my BCRAN exam, there was even a question where I had to enter the commands to configure frame relay. Some questions give you a list and you have to pick the command, some you just have to know as you get no list. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53750&t=53668 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
