BRI Problem
I have 2 Cisco routers connected by 1 ISDN link between the two. Router A is setup to receive calls and Router B is setup to place the calls. What is happening is Router B makes the call but only 1 B channel is coming up. Both B channels on router B are good and I get the following Layer 1 Status: ACTIVE Layer 2 Status: TEI = 69, State = MULTIPLE_FRAME_ESTABLISHED TEI = 70, State = MULTIPLE_FRAME_ESTABLISHED Layer 3 Status: 1 Active Layer 3 Call(s) Activated dsl 0 CCBs = 3 CCB:callid=0, sapi=0, ces=1, B-chan=0 CCB:callid=E1B6, sapi=0, ces=1, B-chan=1 CCB:callid=E4C6, sapi=0, ces=2, B-chan=0 I have set the dialer load threshold to 1 on Router B and it is using PPP Multilink I have two dialer map statements on router B that calls the SPIDS on Router A. When I do a Show dialer I get the following BRI0 - dialer type = ISDN Dial String Successes FailuresLast called Last status 9825 7 128930:00:29 successful 98254445 3 129000:00:05 failed 0 incoming call(s) have been screened. BRI0: B-Channel 1 Idle timer (2147483 secs), Fast idle timer (30 secs) Wait for carrier (30 secs), Re-enable (15 secs) Time until disconnect 2147482 secs Current call connected 3:17:59 Connected to 9825444(FIRE) BRI0: B-Channel 2 Idle timer (2147483 secs), Fast idle timer (30 secs) Wait for carrier (30 secs), Re-enable (15 secs) Router B constantly dials. Anybody have any Ideas? Spids on Router A are ok Thanks _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: BRI Problem
I've read that for certain switch types, for both channels to work you need to add the LDN for each B channel to your spid statements. That might be worth checking into a little further. John > > I have 2 Cisco routers connected by 1 ISDN link between the two. Router A is > setup to receive calls and Router B is setup to place the calls. What is > happening is Router B makes the call but only 1 B channel is coming up. Both > B channels on router B are good and I get the following > > Layer 1 Status: > ACTIVE > Layer 2 Status: > TEI = 69, State = MULTIPLE_FRAME_ESTABLISHED > TEI = 70, State = MULTIPLE_FRAME_ESTABLISHED > Layer 3 Status: > 1 Active Layer 3 Call(s) > Activated dsl 0 CCBs = 3 > CCB:callid=0, sapi=0, ces=1, B-chan=0 > CCB:callid=E1B6, sapi=0, ces=1, B-chan=1 > CCB:callid=E4C6, sapi=0, ces=2, B-chan=0 > > I have set the dialer load threshold to 1 on Router B and it is using PPP > Multilink > > I have two dialer map statements on router B that calls the SPIDS on Router > A. > > When I do a Show dialer I get the following > > BRI0 - dialer type = ISDN > > Dial String Successes FailuresLast called Last status > 9825 7 128930:00:29 successful > 98254445 3 129000:00:05 failed > 0 incoming call(s) have been screened. > BRI0: B-Channel 1 > Idle timer (2147483 secs), Fast idle timer (30 secs) > Wait for carrier (30 secs), Re-enable (15 secs) > Time until disconnect 2147482 secs > Current call connected 3:17:59 > Connected to 9825444(FIRE) > BRI0: B-Channel 2 > Idle timer (2147483 secs), Fast idle timer (30 secs) > Wait for carrier (30 secs), Re-enable (15 secs) > > Router B constantly dials. Anybody have any Ideas? > Spids on Router A are ok > > Thanks > > _ > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Find the best deals on the web at AltaVista Shopping! http://www.shopping.altavista.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: BRI Problem
Hi, You need to have the dialer-load and/or ppp multi set on both routers. You debug seems to indicate the ISDN service is fine. Oh make sure your dialer-load thresholds work for for both directions. Teunis Hobart, Tasmania Australia On Wednesday, February 07, 2001 at 09:14:42 AM, John Neiberger wrote: > I've read that for certain switch types, for both channels to work you need to add >the LDN for each B channel to your spid statements. That might be worth checking >into a little further. > > John > > > > > I have 2 Cisco routers connected by 1 ISDN link between the two. Router A is > > setup to receive calls and Router B is setup to place the calls. What is > > happening is Router B makes the call but only 1 B channel is coming up. Both > > B channels on router B are good and I get the following > > > > Layer 1 Status: > > ACTIVE > > Layer 2 Status: > > TEI = 69, State = MULTIPLE_FRAME_ESTABLISHED > > TEI = 70, State = MULTIPLE_FRAME_ESTABLISHED > > Layer 3 Status: > > 1 Active Layer 3 Call(s) > > Activated dsl 0 CCBs = 3 > > CCB:callid=0, sapi=0, ces=1, B-chan=0 > > CCB:callid=E1B6, sapi=0, ces=1, B-chan=1 > > CCB:callid=E4C6, sapi=0, ces=2, B-chan=0 > > > > I have set the dialer load threshold to 1 on Router B and it is using PPP > > Multilink > > > > I have two dialer map statements on router B that calls the SPIDS on Router > > A. > > > > When I do a Show dialer I get the following > > > > BRI0 - dialer type = ISDN > > > > Dial String Successes FailuresLast called Last status > > 9825 7 128930:00:29 successful > > 98254445 3 129000:00:05 failed > > 0 incoming call(s) have been screened. > > BRI0: B-Channel 1 > > Idle timer (2147483 secs), Fast idle timer (30 secs) > > Wait for carrier (30 secs), Re-enable (15 secs) > > Time until disconnect 2147482 secs > > Current call connected 3:17:59 > > Connected to 9825444(FIRE) > > BRI0: B-Channel 2 > > Idle timer (2147483 secs), Fast idle timer (30 secs) > > Wait for carrier (30 secs), Re-enable (15 secs) > > > > Router B constantly dials. Anybody have any Ideas? > > Spids on Router A are ok > > > > Thanks > > > > _ > > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. > > > > _ > > FAQ, list archives, and subscription info: >http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > Find the best deals on the web at AltaVista Shopping! > http://www.shopping.altavista.com > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > -- www.tasmail.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: BRI Problem
This is a bit of a shot in the dark - I use a different switch type and no SPIDs so things may show up differently. I notice that you have three activated CCBs, but only one active call. If I make a call in my setup, I only expect to see one activated CCB per active call. However there is a bug that affects primary rate services (don't know if it also affects BRI) where sometimes the CCBs are not released after a call. This means you can't use that channel until the interface is reset and the CCBs cleared. This is probably not what is causing your problem, but if you want to rule it out, shut/no shut the BRI interface and check that there are no activated CCBs and no active calls. Then try again. JMcL -- Forwarded by Jenny Mcleod/NSO/CSDA on 08/02/2001 08:46 am --- John Neiberger <[EMAIL PROTECTED]>@groupstudy.com on 08/02/2001 04:14:42 am Please respond to John Neiberger <[EMAIL PROTECTED]> Sent by: [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: [EMAIL PROTECTED] Subject: Re: BRI Problem I've read that for certain switch types, for both channels to work you need to add the LDN for each B channel to your spid statements. That might be worth checking into a little further. John > > I have 2 Cisco routers connected by 1 ISDN link between the two. Router A is > setup to receive calls and Router B is setup to place the calls. What is > happening is Router B makes the call but only 1 B channel is coming up. Both > B channels on router B are good and I get the following > > Layer 1 Status: > ACTIVE > Layer 2 Status: > TEI = 69, State = MULTIPLE_FRAME_ESTABLISHED > TEI = 70, State = MULTIPLE_FRAME_ESTABLISHED > Layer 3 Status: > 1 Active Layer 3 Call(s) > Activated dsl 0 CCBs = 3 > CCB:callid=0, sapi=0, ces=1, B-chan=0 > CCB:callid=E1B6, sapi=0, ces=1, B-chan=1 > CCB:callid=E4C6, sapi=0, ces=2, B-chan=0 > > I have set the dialer load threshold to 1 on Router B and it is using PPP > Multilink > > I have two dialer map statements on router B that calls the SPIDS on Router > A. > > When I do a Show dialer I get the following > > BRI0 - dialer type = ISDN > > Dial String Successes FailuresLast called Last status > 9825 7 128930:00:29 successful > 98254445 3 129000:00:05 failed > 0 incoming call(s) have been screened. > BRI0: B-Channel 1 > Idle timer (2147483 secs), Fast idle timer (30 secs) > Wait for carrier (30 secs), Re-enable (15 secs) > Time until disconnect 2147482 secs > Current call connected 3:17:59 > Connected to 9825444(FIRE) > BRI0: B-Channel 2 > Idle timer (2147483 secs), Fast idle timer (30 secs) > Wait for carrier (30 secs), Re-enable (15 secs) > > Router B constantly dials. Anybody have any Ideas? > Spids on Router A are ok > > Thanks > > _ > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Find the best deals on the web at AltaVista Shopping! http://www.shopping.altavista.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Modem over BRI Problem [7:39363]
I am in need of a quick help. Has anyone done this config? I have 3640 with 6 port digital modem and 4 port BRI. Two BRI lines are provisioned by Verizon to accept modem dialin. Foillowing is the debugging output when a user dials in to one of the BRI lines. 3640-Router# Mar 22 15:54:23: ISDN BR2/0: RX <- SETUP pd = 8 callref = 0x01 Mar 22 15:54:23: Bearer Capability i = 0x8090A2 Mar 22 15:54:23: Channel ID i = 0x89 Mar 22 15:54:23: Progress Ind i = 0x8283 - Origination address is non-ISDN Mar 22 15:54:23: Signal i = 0x40 - Alerting on - pattern 0 Mar 22 15:54:23: Calling Party Number i = 0x0083, '7813883489' Mar 22 15:54:23: Called Party Number i = 0xC1, '3222368' Mar 22 15:54:23: Locking Shift to Codeset 5 Mar 22 15:54:23: Codeset 5 IE 0x2A i = 0x808B0A, '7813883489', 0x80010A800114800114800114 Mar 22 15:54:23: ISDN BR2/0: Event: Received a call id 0x11 with a bad bearercap from 7813883489 on B1 3640-Router# Mar 22 15:54:25: ISDN BR2/0: RX <- SETUP pd = 8 callref = 0x01 Mar 22 15:54:25: Bearer Capability i = 0x8090A2 Mar 22 15:54:25: Channel ID i = 0x89 Mar 22 15:54:25: Progress Ind i = 0x8283 - Origination address is non-ISDN Mar 22 15:54:25: Signal i = 0x40 - Alerting on - pattern 0 Mar 22 15:54:25: Calling Party Number i = 0x0083, '7813883489' Mar 22 15:54:25: Called Party Number i = 0xC1, '3222368' Mar 22 15:54:25: Locking Shift to Codeset 5 Mar 22 15:54:25: Codeset 5 IE 0x2A i = 0x808B0A, '7813883489', 0x80010A800114800114800114 Mar 22 15:54:25: ISDN BR2/0: Event: Received a call id 0x12 with a bad bearercap from 7813883489 on B1 Verizon tells me they have the ISDN switch confugred correctly. I have the following config(I have deleted some config unrelated to this issue) 3640-Router#sh run Building configuration... Current configuration: ! ! Last configuration change at 14:15:52 EST Fri Mar 22 2002 ! NVRAM config last updated at 12:51:14 EST Fri Mar 22 2002 ! version 12.0 service timestamps debug datetime localtime service timestamps log datetime localtime service password-encryption ! hostname 3640-Router ! logging buffered 8192 debugging aaa new-model aaa authentication login default radius local aaa authentication login NOAUTH none aaa authentication login LINE line aaa authentication ppp default radius aaa authorization network default radius aaa accounting exec default start-stop radius aaa accounting network default start-stop radius enable secret 5 $1$WOiv$Y36Ly7qDTlc5.vjy8W4Ji. ! username x password 7 xxx clock timezone EST -5 clock summer-time ESD recurring modem country mica usa ip subnet-zero no ip source-route no ip finger no ip domain-lookup ip name-server 10.0.0.2 ip name-server 10.0.0.3 ip name-server 134.241.180.1 ! ip dhcp-server 10.0.0.2 appletalk routing appletalk virtual-net 50 printers isdn switch-type basic-5ess ! ! ! interface Ethernet1/0 ip address 10.0.9.4 255.255.0.0 no ip directed-broadcast appletalk cable-range 1-30 11.236 appletalk zone printers ! interface BRI2/0 no ip address no ip directed-broadcast encapsulation ppp isdn switch-type basic-dms100 isdn spid1 xxx x isdn spid2 xxx x isdn not-end-to-end 56 isdn incoming-voice modem no cdp enable ! interface BRI2/1 no ip address no ip directed-broadcast encapsulation ppp isdn switch-type basic-dms100 isdn spid1 xxx x isdn spid2 xxx x isdn incoming-voice modem no cdp enable ! interface BRI2/2 no ip address no ip directed-broadcast encapsulation ppp shutdown isdn switch-type basic-5ess isdn incoming-voice modem ! interface BRI2/3 no ip address no ip directed-broadcast encapsulation ppp shutdown isdn switch-type basic-5ess isdn incoming-voice modem ! interface Group-Async1 description "Digital Modem Module in Slot 0" ip unnumbered Ethernet1/0 no ip directed-broadcast encapsulation ppp ip tcp header-compression passive async mode interactive appletalk client-mode peer default ip address dhcp no cdp enable ppp authentication ms-chap chap pap group-range 1 12 ! ip classless ip route 0.0.0.0 0.0.0.0 10.0.0.1 no ip http server ! dialer-list 1 protocol ip permit dialer-list 1 protocol appletalk permit radius-server host 10.0.0.20 auth-port 1645 acct-port 1646 radius-server timeout 20 radius-server key budlight ! line con 0 logging synchronous login authentication NOAUTH transport input none line 1 12 autoselect during-login autoselect ppp modem InOut transport input all ! line aux 0 line vty 0 4 password 7 07052245 login authentication LINE ! ntp clock-period 17180010 ntp server 18.26.4.105 end Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39363&t=39363 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTE