Code upgrade switch catalyst 1200 [7:43348]
Hello Guys, I have a weird problem with upgrading my switch and I was wondering if somebody could help me out. My laptop is in the same subnet as the switch , but I cannot ping each other. I am running tftp server in my laptop so if I cannot ping I cannot upgrade it. I check the port where my laptop is connected and it says OK. Any ideas?? Laptop: 10.2.2.1 /16 Switch : 10.2.2.2 /16 Command used in the switch : set interface sc0 10.2.2.2 255.255.0.0 Thanks, Alex Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=43348&t=43348 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Code upgrade switch catalyst 1200 [7:43348]
make sure the port your laptop is connected to and the int sc0 are in the same vlan. If not the laptop wont be able to ping the switch mgmt interface. Larry Letterman Cisco Systems [EMAIL PROTECTED] - Original Message - From: "Alexandre Carvalho" To: Sent: Sunday, May 05, 2002 3:25 PM Subject: Code upgrade switch catalyst 1200 [7:43348] > Hello Guys, > I have a weird problem with upgrading my switch and I was wondering if > somebody could help me out. > My laptop is in the same subnet as the switch , but I cannot ping each > other. I am running tftp server in my laptop so if I cannot ping I cannot > upgrade it. I check the port where my laptop is connected and it says OK. > Any ideas?? > > Laptop: 10.2.2.1 /16 > Switch : 10.2.2.2 /16 > > Command used in the switch : set interface sc0 10.2.2.2 255.255.0.0 > > Thanks, > > Alex Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=43355&t=43348 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Code upgrade switch catalyst 1200 [7:43348]
Which model switch is it? If it's running IOS then you simply need an IP on interface VLAN1. By defaults all ports are in VLAN1, but if you've changed it around, you need to make a port in VLAN1 and connect to it. If it's using the CatOS, then make sure you're plugging into a port (again) on VLAN1 since that's the default mgmt VLAN (i.e. can communicate with sc0) Mike W. "Alexandre Carvalho" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello Guys, > I have a weird problem with upgrading my switch and I was wondering if > somebody could help me out. > My laptop is in the same subnet as the switch , but I cannot ping each > other. I am running tftp server in my laptop so if I cannot ping I cannot > upgrade it. I check the port where my laptop is connected and it says OK. > Any ideas?? > > Laptop: 10.2.2.1 /16 > Switch : 10.2.2.2 /16 > > Command used in the switch : set interface sc0 10.2.2.2 255.255.0.0 > > Thanks, > > Alex Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=43363&t=43348 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Code upgrade switch catalyst 1200 [7:43348]
Just curious, I have a 1201 and I just practiced making a copy of my nmp and dmp with TFTP server. Did you give your switch a IP address using the admin port? Than make sure you are plugged into a port with ethernet and make sure your laptop is on the same subnet. What software version are you upgrading to? I have 4.26. ""Michael L. Williams"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Which model switch is it? If it's running IOS then you simply need an IP on > interface VLAN1. By defaults all ports are in VLAN1, but if you've changed > it around, you need to make a port in VLAN1 and connect to it. > > If it's using the CatOS, then make sure you're plugging into a port (again) > on VLAN1 since that's the default mgmt VLAN (i.e. can communicate with sc0) > > Mike W. > > "Alexandre Carvalho" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hello Guys, > > I have a weird problem with upgrading my switch and I was wondering if > > somebody could help me out. > > My laptop is in the same subnet as the switch , but I cannot ping each > > other. I am running tftp server in my laptop so if I cannot ping I cannot > > upgrade it. I check the port where my laptop is connected and it says OK. > > Any ideas?? > > > > Laptop: 10.2.2.1 /16 > > Switch : 10.2.2.2 /16 > > > > Command used in the switch : set interface sc0 10.2.2.2 255.255.0.0 > > > > Thanks, > > > > Alex Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=43398&t=43348 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Code upgrade switch catalyst 1200 [7:43348]
what port are you plugged into on the switch? can you print in an email the "show interface" command? ""Alexandre Carvalho"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello Guys, > I have a weird problem with upgrading my switch and I was wondering if > somebody could help me out. > My laptop is in the same subnet as the switch , but I cannot ping each > other. I am running tftp server in my laptop so if I cannot ping I cannot > upgrade it. I check the port where my laptop is connected and it says OK. > Any ideas?? > > Laptop: 10.2.2.1 /16 > Switch : 10.2.2.2 /16 > > Command used in the switch : set interface sc0 10.2.2.2 255.255.0.0 > > Thanks, > > Alex Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=43482&t=43348 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Code upgrade switch catalyst 1200 [7:43348]
Are both ports on the same vlan? -Original Message- From: Wayne Jang [mailto:[EMAIL PROTECTED]] Sent: Tuesday, May 07, 2002 8:24 AM To: [EMAIL PROTECTED] Subject: Re: Code upgrade switch catalyst 1200 [7:43348] what port are you plugged into on the switch? can you print in an email the "show interface" command? ""Alexandre Carvalho"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello Guys, > I have a weird problem with upgrading my switch and I was wondering if > somebody could help me out. > My laptop is in the same subnet as the switch , but I cannot ping each > other. I am running tftp server in my laptop so if I cannot ping I cannot > upgrade it. I check the port where my laptop is connected and it says OK. > Any ideas?? > > Laptop: 10.2.2.1 /16 > Switch : 10.2.2.2 /16 > > Command used in the switch : set interface sc0 10.2.2.2 255.255.0.0 > > Thanks, > > Alex Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=43485&t=43348 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Code upgrade switch catalyst 1200 [7:43348]
Are both ports on the same vlan? Also you'll need to set the sc0 to the correct vlan by: set interface sc0 And the computer need to be on the same vlan: set vlan Make sure you set the correct speed and duplex setting on the port for the computer. You should see the port for the computer as connected. Jim Walker -Original Message- From: Wayne Jang [mailto:[EMAIL PROTECTED]] Sent: Tuesday, May 07, 2002 8:24 AM To: [EMAIL PROTECTED] Subject: Re: Code upgrade switch catalyst 1200 [7:43348] what port are you plugged into on the switch? can you print in an email the "show interface" command? ""Alexandre Carvalho"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello Guys, > I have a weird problem with upgrading my switch and I was wondering if > somebody could help me out. > My laptop is in the same subnet as the switch , but I cannot ping each > other. I am running tftp server in my laptop so if I cannot ping I cannot > upgrade it. I check the port where my laptop is connected and it says OK. > Any ideas?? > > Laptop: 10.2.2.1 /16 > Switch : 10.2.2.2 /16 > > Command used in the switch : set interface sc0 10.2.2.2 255.255.0.0 > > Thanks, > > Alex Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=43486&t=43348 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Code upgrade switch catalyst 1200 [7:43348]
good point, if they are on different vlans, then they need to be on different ip networks. >>> "Walker, Jim" 05/07/02 08:44AM >>> Are both ports on the same vlan? -Original Message- From: Wayne Jang [mailto:[EMAIL PROTECTED]] Sent: Tuesday, May 07, 2002 8:24 AM To: [EMAIL PROTECTED] Subject: Re: Code upgrade switch catalyst 1200 [7:43348] what port are you plugged into on the switch? can you print in an email the "show interface" command? ""Alexandre Carvalho"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello Guys, > I have a weird problem with upgrading my switch and I was wondering if > somebody could help me out. > My laptop is in the same subnet as the switch , but I cannot ping each > other. I am running tftp server in my laptop so if I cannot ping I cannot > upgrade it. I check the port where my laptop is connected and it says OK. > Any ideas?? > > Laptop: 10.2.2.1 /16 > Switch : 10.2.2.2 /16 > > Command used in the switch : set interface sc0 10.2.2.2 255.255.0.0 > > Thanks, > > Alex Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=43499&t=43348 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
