Re: Crazy 2611
Could be 2 things: an older boot ROM (not stable with 12.0) conflict (I believe 11.3 came with a 11.0 ROM 12.0 is suggested to have an 11.3 ROM), or just a config (or NVRAM) conflict. Do you see a message when reloading, that reads something like this... configs made in 11.XX may not be compatible ??? From time to time, I've had to wiped NVRAM re-installed the config. 3rd scenario, is your new IOS a GR version ??? .02 Good Luck !!! Phil - Original Message - From: "Charles Nunie" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, September 19, 2000 4:21 PM Subject: Crazy 2611 Hi everyone, We have two Cisco 2611 routers which we intend to use for VoIP for a client. It has the 11.3(2) XA4 version of bootstrap and an 11.3T IOS which we replaced with 12.0(7) XK1. Each time we issue commands like copy run start or write mem, it says: Attempting to overwrite an NVRAM configuration previously written by a different version of the system image and then asks for confirmation after which it reboots without making any permanent changes. It also says system received a segV exception. Other confirguration commands like dial-peer voice. pots, show run, more system: running - config etc. also causes the system to reboot in which situation all configurations are lost. What could be wrong please. Regards, Francis Amanor Get free email and a permanent address at http://www.netaddress.com/?N=1 **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Crazy 2611
Hi everyone, We have two Cisco 2611 routers which we intend to use for VoIP for a client. It has the 11.3(2) XA4 version of bootstrap and an 11.3T IOS which we replaced with 12.0(7) XK1. Each time we issue commands like copy run start or write mem, it says: Attempting to overwrite an NVRAM configuration previously written by a different version of the system image and then asks for confirmation after which it reboots without making any permanent changes. It also says system received a segV exception. Other confirguration commands like dial-peer voice. pots, show run, more system: running - config etc. also causes the system to reboot in which situation all configurations are lost. What could be wrong please. Regards, Francis Amanor Get free email and a permanent address at http://www.netaddress.com/?N=1 **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Crazy 2611
I'm not sure if this is the best fix it, but one you can show running-config and log it to a text file. Erase the nvram, reboot, and the reenter the commands from the text file. This works, but I would be interested to learn the _proper_ fix for it. Original Message Follows From: Charles Nunie [EMAIL PROTECTED] Reply-To: Charles Nunie [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Crazy 2611 Date: 19 Sep 00 11:21:36 MDT Hi everyone, We have two Cisco 2611 routers which we intend to use for VoIP for a client. It has the 11.3(2) XA4 version of bootstrap and an 11.3T IOS which we replaced with 12.0(7) XK1. Each time we issue commands like copy run start or write mem, it says: Attempting to overwrite an NVRAM configuration previously written by a different version of the system image and then asks for confirmation after which it reboots without making any permanent changes. It also says system received a segV exception. Other confirguration commands like dial-peer voice. pots, show run, more system: running - config etc. also causes the system to reboot in which situation all configurations are lost. What could be wrong please. Regards, Francis Amanor Get free email and a permanent address at http://www.netaddress.com/?N=1 **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]