RE: Help! What happen??? URGENT!
Sorry guys Problem solved. I have tested 3 transceivers but unfortunately that 3 are the faulty transceiver. Now is working fine. I bought a new one. Bad luck ha! William Wong Kun Sing IS Executive, Enterprise Services Organisation Solsis (M) Sdn. Bhd. MCP, MCP+I, MCSE, Cisco CCNA > -Original Message- > From: Erick [SMTP:[EMAIL PROTECTED]] > Sent: 07 June 2000 13:17 > To: William Wong; [EMAIL PROTECTED] > Subject: Re: Help! What happen??? URGENT! > > > Have you tried a different port in the hub, tried > another hub, or took your PC/laptop and plugged it > into router with crossover to see if interface stays > up? Was this working fine and just started being a > problem? > > - Erick > > --- William Wong <[EMAIL PROTECTED]> > wrote: > > Help me guys > > > > Interface Ethenet0 on cisco 2503 router problem! > > > > Physical connection:- > > > > AUI port -> Transceiver -> > > Hub > > > > I use Hyperterminal to logon into the router. > > > > It keep showing that the line protocol for interface > > ethernet0 change state > > to up and change state to down and I cannot ping the > > router. > > > > I have:- > > Changed the router > > Changed the transceiver and all the cables > > But still the same. > > > > What is the possibility now > > > __ > Do You Yahoo!? > Yahoo! Photos -- now, 100 FREE prints! > http://photos.yahoo.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Help! What happen??? URGENT!
Have you tried a different port in the hub, tried another hub, or took your PC/laptop and plugged it into router with crossover to see if interface stays up? Was this working fine and just started being a problem? - Erick --- William Wong <[EMAIL PROTECTED]> wrote: > Help me guys > > Interface Ethenet0 on cisco 2503 router problem! > > Physical connection:- > > AUI port -> Transceiver -> > Hub > > I use Hyperterminal to logon into the router. > > It keep showing that the line protocol for interface > ethernet0 change state > to up and change state to down and I cannot ping the > router. > > I have:- > Changed the router > Changed the transceiver and all the cables > But still the same. > > What is the possibility now __ Do You Yahoo!? Yahoo! Photos -- now, 100 FREE prints! http://photos.yahoo.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Help! What happen??? URGENT!
You maybe in a loop- try a shut and then a no shut on the interface, kinda like reset the interface- William Wong wrote: > > Help me guys > > Interface Ethenet0 on cisco 2503 router problem! > > Physical connection:- > > AUI port -> Transceiver -> Hub > > I use Hyperterminal to logon into the router. > > It keep showing that the line protocol for interface ethernet0 change state > to up and change state to down and I cannot ping the router. > > I have:- > Changed the router > Changed the transceiver and all the cables > But still the same. > > What is the possibility now > > Thanks! > > William > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Help! What happen??? URGENT!
Help me guys Interface Ethenet0 on cisco 2503 router problem! Physical connection:- AUI port -> Transceiver -> Hub I use Hyperterminal to logon into the router. It keep showing that the line protocol for interface ethernet0 change state to up and change state to down and I cannot ping the router. I have:- Changed the router Changed the transceiver and all the cables But still the same. What is the possibility now Thanks! William ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Help! What happen??? URGENT!
Plug a work station directly from the router if it has a built in CSU, to a work station and skip the hub for nowand test it out... If the eth is down, make sure the main connection is there, and conencted, or call the ISP and see if the right routes have been routed to you... Check the CSU stats, check the smart jack, and have you been routed? or get a loob back cable in the router and see if you can ligh tup the interface is it a T1? do u need a CSU? William Wong wrote: > > Help me guys > > Interface Ethenet0 on cisco 2503 router problem! > > Physical connection:- > > AUI port -> Transceiver -> Hub > > I use Hyperterminal to logon into the router. > > It keep showing that the line protocol for interface ethernet0 change state > to up and change state to down and I cannot ping the router. > > I have:- > Changed the router > Changed the transceiver and all the cables > But still the same. > > What is the possibility now > > Thanks! > > William > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]