Re: MPLS TE crash the router 2500 [7:70221]
Thanks, I sucessfully created MPLS VPN on this platform/image, but maybe it is necessary 2600 family router to test MPLS TE. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70542&t=70221 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: MPLS TE crash the router 2500 [7:70221]
this is an experimental image. > IOS (tm) 2500 Software (C2500-JS-L), Experimental Version so this trace can not be decoded like this.. the DE of the image should be contacted.. > %Software-forced reload regards devvv - Original Message - From: "alaerte Vidali" To: Sent: Tuesday, June 10, 2003 4:55 PM Subject: Re: MPLS TE crash the router 2500 [7:70221] > I tried another version, but occurs the same error message: > > R2#sh ver > Cisco Internetwork Operating System Software > IOS (tm) 2500 Software (C2500-JS-L), Experimental Version > 12.0(20011017:155337) [rraszuk > -New_reorg_oct17 110] > > 2#sh flash > > System flash directory: > File Length Name/status > 1 12940544 c2500-js-l.20oct2001 > > > > 00:51:15: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = > MPLS TE LM. > -Traceback= 3206E92 3209C6C 320449C 3204672 1005AF8 100453E 1000196 > 00:51:16: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial0.23 from EXSTART > to DOWN, Nei > ghbor Down: Dead timer expired > 00:51:16: %SYS-5-CONFIG_I: Configured from console by console > 01:07:04: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = > MPLS TE LM. > -Traceback= 3206E92 3209C6C 320449C 3204672 1005AF8 100453E 1000196 > 01:22:53: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = > MPLS TE LM. > -Traceback= 3206E92 3209C6C 320449C 3204672 1005AF8 100453E 1000196 > 01:38:39: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = > MPLS TE LM. > -Traceback= 3206E92 3209C6C 320449C 3204672 1005AF8 100453E 1000196 > 01:54:23: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = > MPLS TE LM. > -Traceback= 3206E92 3209C6C 320449C 3204672 1005AF8 100453E 1000196 > 02:10:07: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = > MPLS TE LM. > -Traceback= 3206E92 3209C6C 320449C 3204672 1005AF8 100453E 1000196 > 02:25:49: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = > MPLS TE LM. > -Traceback= 3206E92 3209C6C 320449C 3204672 1005AF8 100453E 1000196 > 02:41:31: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = > MPLS TE LM. > -Traceback= 3206E92 3209C6C 320449C 3204672 1005AF8 100453E 1000196 > 02:57:11: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = > MPLS TE LM. > -Traceback= 3206E92 3209C6C 320449C 3204672 1005AF8 100453E 1000196 > 03:12:51: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = > MPLS TE LM. > -Traceback= 3206E92 3209C6C 320449C 3204672 1005AF8 100453E 1000196 > 03:28:31: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = > MPLS TE LM. > -Traceback= 3206E92 3209C6C 320449C 3204672 1005AF8 100453E 1000196 > 03:44:11: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = > MPLS TE LM. > -Traceback= 3206E92 3209C6C 320449C 3204672 1005AF8 100453E 1000196 > 03:59:51: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = > MPLS TE LM. > -Traceback= 3206E92 3209C6C 320449C 3204672 1005AF8 100453E 1000196 > Queued messages: > > %Software-forced reload Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70478&t=70221 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: MPLS TE crash the router 2500 [7:70221]
I tried another version, but occurs the same error message: R2#sh ver Cisco Internetwork Operating System Software IOS (tm) 2500 Software (C2500-JS-L), Experimental Version 12.0(20011017:155337) [rraszuk -New_reorg_oct17 110] 2#sh flash System flash directory: File Length Name/status 1 12940544 c2500-js-l.20oct2001 00:51:15: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = MPLS TE LM. -Traceback= 3206E92 3209C6C 320449C 3204672 1005AF8 100453E 1000196 00:51:16: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial0.23 from EXSTART to DOWN, Nei ghbor Down: Dead timer expired 00:51:16: %SYS-5-CONFIG_I: Configured from console by console 01:07:04: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = MPLS TE LM. -Traceback= 3206E92 3209C6C 320449C 3204672 1005AF8 100453E 1000196 01:22:53: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = MPLS TE LM. -Traceback= 3206E92 3209C6C 320449C 3204672 1005AF8 100453E 1000196 01:38:39: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = MPLS TE LM. -Traceback= 3206E92 3209C6C 320449C 3204672 1005AF8 100453E 1000196 01:54:23: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = MPLS TE LM. -Traceback= 3206E92 3209C6C 320449C 3204672 1005AF8 100453E 1000196 02:10:07: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = MPLS TE LM. -Traceback= 3206E92 3209C6C 320449C 3204672 1005AF8 100453E 1000196 02:25:49: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = MPLS TE LM. -Traceback= 3206E92 3209C6C 320449C 3204672 1005AF8 100453E 1000196 02:41:31: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = MPLS TE LM. -Traceback= 3206E92 3209C6C 320449C 3204672 1005AF8 100453E 1000196 02:57:11: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = MPLS TE LM. -Traceback= 3206E92 3209C6C 320449C 3204672 1005AF8 100453E 1000196 03:12:51: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = MPLS TE LM. -Traceback= 3206E92 3209C6C 320449C 3204672 1005AF8 100453E 1000196 03:28:31: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = MPLS TE LM. -Traceback= 3206E92 3209C6C 320449C 3204672 1005AF8 100453E 1000196 03:44:11: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = MPLS TE LM. -Traceback= 3206E92 3209C6C 320449C 3204672 1005AF8 100453E 1000196 03:59:51: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = MPLS TE LM. -Traceback= 3206E92 3209C6C 320449C 3204672 1005AF8 100453E 1000196 Queued messages: %Software-forced reload Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70457&t=70221 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
MPLS TE crash the router 2500 [7:70221]
After entering 'tunnel mpls traffic-eng path-option 1 dynamic' the router crash. The configuration is: ip cef mpls traffic-eng tunnels ! interface loopback 0 ip address 2.2.2.2 255.255.255.255 ! interface se 0.23 ip address 192.168.23.1 255.255.255.255 mpls traffic-eng tunnels ip rsvp bandwidth 1000 ! router ospf 0 network 192.168.23.0 0.0.0.255 area 0 mpls traffic-eng router-id Loopback0 mpls traffic-eng area 0 ! interface tunnel1 ip unnumbered loopback 0 tunnel destination 3.3.3.3 tunnel mode mpls traffic-eng tunnel mpls traffic-eng bandwidth 100 tunnel mpls traffic-eng priority 1 1 ! end When the command 'tunnel mpls traffic-eng path-option 1 dynamic' is entered, the following messages appear and it is necessary reload the router (physically). 8w5d: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel1, changed state to down 8w5d: %LINK-5-CHANGED: Interface Loopback0, changed state to administratively down 8w5d: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed state to down 8w5d: %LINK-3-UPDOWN: Interface Loopback0, changed state to up 8w5d: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed state to up 8w5d: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial0.23 from EXCHANGE to DOWN, Neighb or Down: Interface down or detached hbor Down: Interface down or detached 8w5d: %OSPF-4-NONEIGHBOR: Received database description from unknown neighbor 3.3.3.3 8w5d: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial0.23 from LOADING to FULL, Loading Done 8w5d: %LINK-3-UPDOWN: Interface Tunnel1, changed state to up Queued messages:Local Timeout (control reg=0x118) Error, address: 0x20201FE at 0x34CEA50 (PC) I also tried explicity path; the result is the same. And IS-IS too. Any Thoughts? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70221&t=70221 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: MPLS TE crash the router 2500 [7:70221]
The version is: R3#sh vers Cisco Internetwork Operating System Software IOS (tm) 2500 Software (C2500-P-L), Experimental Version 12.0(20011017:155337) [rraszuk- New_reorg_oct17 109] R3#sh flash System flash directory: File Length Name/status 1 8303380 /c2500-p-l.20oct2001 The memory is: 16384K flash 16M DRAM Thanks in Advance Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70259&t=70221 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: MPLS TE crash the router 2500 [7:70221]
it is strange i used this command many times and my routers never crashed :) is this only happening on the 2500 platform? and could you tell your "sh ver" regards De - Original Message - From: "alaerte Vidali" To: Sent: Thursday, June 05, 2003 10:13 PM Subject: MPLS TE crash the router 2500 [7:70221] > After entering 'tunnel mpls traffic-eng path-option 1 dynamic' the router > crash. > > > The configuration is: > > ip cef > mpls traffic-eng tunnels > ! > interface loopback 0 > ip address 2.2.2.2 255.255.255.255 > ! > interface se 0.23 > ip address 192.168.23.1 255.255.255.255 > mpls traffic-eng tunnels > ip rsvp bandwidth 1000 > ! > router ospf 0 > network 192.168.23.0 0.0.0.255 area 0 > mpls traffic-eng router-id Loopback0 > mpls traffic-eng area 0 > ! > interface tunnel1 > ip unnumbered loopback 0 > tunnel destination 3.3.3.3 > tunnel mode mpls traffic-eng > tunnel mpls traffic-eng bandwidth 100 > tunnel mpls traffic-eng priority 1 1 > > ! > end > > When the command 'tunnel mpls traffic-eng path-option 1 dynamic' is entered, > the following messages appear and it is necessary reload the router > (physically). > > 8w5d: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel1, changed state > to down > 8w5d: %LINK-5-CHANGED: Interface Loopback0, changed state to > administratively down > 8w5d: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed > state to down > 8w5d: %LINK-3-UPDOWN: Interface Loopback0, changed state to up > 8w5d: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed > state to up > 8w5d: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial0.23 from EXCHANGE to > DOWN, Neighb > or Down: Interface down or detached > hbor Down: Interface down or detached > 8w5d: %OSPF-4-NONEIGHBOR: Received database description from unknown > neighbor 3.3.3.3 > 8w5d: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial0.23 from LOADING to > FULL, Loading > Done > 8w5d: %LINK-3-UPDOWN: Interface Tunnel1, changed state to up > Queued messages:Local Timeout (control reg=0x118) Error, address: 0x20201FE > at 0x34CEA50 > (PC) > > I also tried explicity path; the result is the same. And IS-IS too. > > Any Thoughts? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70257&t=70221 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
